Injection molding machine up to 5000 KN

KraussMaffei 2300/12000/MC

Year of construction: 1981, condition: refurbished (used), functionality: fully functional, Previous application: Production of TPE films up to 6 mm thick. Many other polymers possible. The plant has been in operation until now and can be inspected at any time in Nuremberg. The line consists of: Kuhne K45-24D single-screw extruder Screw diameter: 48 mm Process length: 24D Drive power: Heating capacity: 6.0 kW Net weight: 1150 kg Wide slit nozzle: Foils up to max. 330 mm width Calender Gross roller width: 1200 mm Net roller width: 1100 mm (max. film width) Take-off device and impact shears Podeu Ttf Nopfx Angjgu

Condition: used, Stretch blow molding machine by Etek ISBM line = Injection stretch blow molding Stretch blow molding machine for single-use PET bottles made from PET preforms Stretch blow molding machine for production using the rotary process Manufacturer: ETEK / GF-Industries, Type Supra 800 sv 1 Serial number: 22000225 Year of manufacture: 2012 Power: 90 kW Mains connection: 400 volts, 50 Hz Weight: approximately 6000 kg Psdpskucxlsfx Angegu In like-new condition

Condition: used, Year of construction: 2017, machine/vehicle number: LC560, Used Processing Line for small dairy products 2000 L/h Milk Reception and Initial Storage The Used Processing Line for Small Dairy Products 2000 L/h begins with a milk reception unit consisting of two Lactofreeze tanks and a receiving pump. Initially, operators channel raw milk into the tanks, where it remains chilled. As a result, the system ensures thermal stability before processing. Furthermore, this setup minimizes the bacterial load while allowing continuous transfer to the pasteurization stage. Pasteurization and Separation Next, the pasteurization phase uses a plate heat exchanger with a retention section and auxiliary systems, all rated for 2,000 liters per hour. Specifically, the pasteurizer rapidly heats and holds milk at a predefined temperature to eliminate pathogens. Then, the GEA WESTFALIA separator—rated at 3,000 L/h—performs cream separation. Simultaneously, the RANNIE homogenizer (1,000 L/h) reduces fat globules, thus enhancing emulsion stability and preventing cream rise. Fermentation and Coagulation Following thermal treatment, the milk proceeds to fermentation. Here, operators use an insulated double-wall fermentation tank with a 1,000-liter capacity and planetary agitator. Consequently, they maintain uniform bacterial activity and precise temperature control. In parallel, a 1,000-liter coagulation vat equipped with a planetary mixer initiates the curdling process. Both tanks ensure optimal protein structuring for yogurt, cheese, and cultured cream products. Cheese Processing and Draining After coagulation, the Used Processing Line for Small Dairy Products 2000 L/h continues with cheese processing. The system includes a 500-liter vat with a draining sieve and two cheese draining tables. Therefore, operators can efficiently handle large curd volumes. Moreover, these components simplify whey separation while ensuring sanitary compliance. Additionally, their design supports easy cleaning and cross-contamination prevention. Packaging Operations Once products are ready for packing, the line integrates semi-automatic and automatic solutions. First, a semi-automatic filler doses pasteurized milk into 1-liter bags. Subsequently, the yogurt cup filler automatically fills and seals 75 mm and 95 mm cups at up to 1,800 units per hour. Meanwhile, the rotary labeling machine by ETICAP (2004) applies both front and rear self-adhesive labels on cylindrical cups. Importantly, the machine ensures consistent alignment and adhesion. Date Coding, Thermal Control, and Final Packing In addition, a Videojet 1220 coder (2019) applies expiry dates onto each product via belt conveyor. Further downstream, a vacuum packaging machine handles cream and cheese portions. Thermal utilities include a 115–150 kW solid fuel boiler (2014) with dual transfer pumps. At the same time, an ice water tank (5,000 L, 2014) and a cooling unit (2018) maintain temperature consistency across the line. Laboratory and Accessories Alongside processing units, the Used Processing Line for Small Dairy Products 2000 L/h features a dedicated laboratory. Specifically, it houses analytical tools for quality control and milk analysis. Additionally, the line includes 300 plastic crates for storing and transporting yogurt cups. System Shutdown and Storage Pedpfx Anew Ahg Regsgu Finally, operators shut down the line in September 2023. Before dismantling, they cleaned ...

Condition: defective spare-parts repository (used), Year of construction: 2007, functionality: not functional, For sale is an injection molding machine of the brand Netstal and the type Synergy 1000-230 After a transportation accident, the control cabinet is completely defective. For this reason, the machine is offered as a spare parts carrier or for repair. Machine would be fully operational and in good condition Technical data: Operating pressure: 210bar, Injection force: 182kN, clamping force: 1000kN, Opening stroke: 0-400mm, mold installation height: 450-750mm Total weight: 7200 kg Operating hours: approx. 53,000 Available from March 2024 First fillings with hydraulic oil can be ordered from us On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale Pedpfx Ansrfbnmogegu PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 200 V, pressing force: 160 t, table length: 600 mm, overall weight: 19,000 kg, punching force: 160 t, height adjustment type: electric, installation height: 1,900 mm, ram adjustment: 100 mm, stroke adjustment: 130 mm, Equipment: documentation/manual, safety light barrier, Manufacturer: AIDA Type: NC2-160 Push force: 160t Year of manufacture: approx. 1991 Stroke length: 130mm Pgsdpfxou D Dhxe Angsu Distance above table: (adjustable) 285-335mm Table size: 1900x600mm Bear size: 1360x585mm Electric power: 3x200V(!!), 15kW - Japanese standard Net weight: 19000kg Size: 2140x2210x3175mm Automatic greasing system. Optionally sheet feeder winder and straightener.

Condition: like new (used), Year of construction: 2023, Technical Data: Maximum clamping force: 3,500 kN Maximum locking force: 3,850 kN Opening stroke: 725 mm Minimum mold installation height: 400 mm Psdpfxsy Hmfyj Angsgu Maximum mold installation height: 900 mm (extended) Clamping plate dimensions (h x v): 1,168 x 1,144 mm Clear tie bar spacing (width x height): 830 x 830 mm Maximum mold weight: 6,600 kg Maximum weight on moving platen: 3,800 kg Maximum weight on fixed platen: 5,100 kg Ejector stroke: 250 mm Ejector force (increased): 100 kN Max. ejector speed: 270 mm Screw diameter: 60 mm Injection pressure: 2,426 bar Max. injection volume: 891 cm³ Max. injection speed: 160 mm/s Max. dosing stroke: 315 mm Max. nozzle stroke: 520 mm Nozzle immersion depth: 20 mm Back pressure over dosing stroke programmable Installed cylinder heating: 23.1 kW Material hopper capacity: 110 l Machine weight: approx. 21 t Accessories: Robot: Manufacturer: SEPRO ROBOTIQUE (France) Model: 5T35 2000/900/TE-1800 Year of manufacture: 2023 Stroke: 2,000 mm Speed: 3.5 m/s Horizontal demolding stroke Y-axis: 900 mm Vertical demolding stroke X-axis: 1,800 mm Robot console on fixed platen Gripper function R1 (C) axis pneumatic 0° - 90°, including quick-change plate Weight: 583 kg MuCell Integration: The special option includes: • Plasticizing cylinder with pneumatic shut-off nozzle without mixing element and without non-return valve; • Interface (communication, emergency stop interface); • Software with functional display pages for controlling the MuCell function; • Adapted nozzle guard; • Position-controlled high-speed screw (analog ZE388) Conveyor belt: Width: 870 mm Usable width: 800 mm Length: 3,500 mm Height: 880 - 1,220 mm Load capacity: 38 kg/m² Belt speed: 5.7 m/min Number of frames: 2 Clear tunnel height: 500 mm This injection molding machine is fully equipped!! Condition: As new condition, only 5,290 operating hours.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036946, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 1,860 bar, injection weight: 183 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,850 mm, overall weight: 5,600 kg, heating capacity: 11.5 kW (15.64 HP), drive type: Vollelektrisch, clear span: 735 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (order 38670023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 40 / standard  Effective Ls/D ratio 20.0 Pjdpfxsud H Dme Angegu  Injection pressure bar 1860  Stroke volume cm³ 201  Shot weight at max. stroke for PS g 183  Injection speed mm/s 200  Injection flow rate cm³/s 251  Screw drive/speed 1/min 334  Plasticizing flow (standard) g/s 24.7  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 20.6  Installed heat output kW 11.5  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.6  Length x width x height m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: excellent (used), double pump for Krauss Maffei Maschines SY2DFE1-21/071-071 KM Nr. 6441936 MNR: R900751978 Pgsdpfxog I Uycs Angou

Condition: good (used), Year of construction: 1990, 4-Axis Machining Centre Table dimensions 1200 x 660 mm Travel paths X 1050 mm, Y 650 mm, Z 660 mm Max. table load 1600 kg Feed speeds 15000 mm/min. Tol magazine with 31 tool places, partly equipped with BT 50 tool holders. 4th axis (controlled) NIKKEN CNC 250, clamping chuck diameter 250 mm Pjdpfx Anefbml Nsgsgu Dimensions in mm: about 3000 x 5000 x 2900 Weight in kg: about 13000

Condition: excellent (used), Year of construction: 2018, Power: 6.5 / 9.4 kW Pjdpfxom Exdwe Angjgu Net weight: 365 kg Several of these units are available! Loading and/or shipping is possible!