Condition: good (used), functionality: fully functional, working width: 260 mm, planing height: 170 mm, spindle diameter: 40 mm, planing width: 260 mm, working height: 170 mm, power of feed motor: 4,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, type of input current: three-phase, shaft diameter: 40 mm, number of spindles: 5, input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Profimat 23 E Working width: 260 mm, Working height: 170 mm, 5 spindles, Spindle diameter: 40 mm, Spindle configuration: 1- Bottom - 5.5 kW 2- Right + 3- Left - 11 kW 4- Top - 5.5 kW 5- Bottom - 11 kW Feed speed: 6 – 24 m/min - 4 kW Air cushion in the table One powered roller in the table at the outfeed. Bodpjyc Nubefx Ab Ijlf Comes with tooling.

Condition: good (used), Year of construction: 2020, functionality: fully functional, Length approx. 2250 mm, width/depth approx. 1370 mm Weight approx. 695 kg, Jointer: Maximum chip removal 5 mm Extraction connection: Extraction nozzle Ø120 mm Thickness planer: Working height min. 3 mm Working height max. 240 mm Minimum workpiece length 220 mm Maximum chip removal 5 mm Drive motor power 7 kW Connection voltage 400 V Mains frequency 50 Hz Bledpfx Aoykaqcob Iof Planer shaft type TERSA 4 planer knives Speed 5000 rpm Maximum planing width 520 mm Feed: Feed speeds 5/8/12/18 m/min Very good condition Available around September 2026 Shipping possible at extra cost!

Condition: good (used), Year of construction: 1979, functionality: fully functional, Four-sided planer / moulder Unimat 22N, 7 spindles Year of manufacture 1979 S/N 286512746 Manufacturer Weinig Germany Blodet Eu Htepfx Ab Ijf planing width 220mm Planing height 120 mm 7 planer shanks: planing table length 2000mm Spindle arrangement (speed of the working spindles 6000 rpm) 1. bottom, 4 kW 2. left, 5,5kW 3. right, 7.5 kW 4. left, 4 kW 5. top, 7.5 kW 6. bottom, 7.5 kW 7. bottom, 4.0 kW 5, 6, 7 with counter bearing 3 rollers in the table (not driven) spindle diameter 40 mm Flying circle of the dressing spindle 125mm Flying circle of the dressing spindle 100-180mm Largest flying circle of the milling spindles 180mm Cardanic feed Feed infinitely variable (frequency converter) 6-36 m /min. Manual Waxilit pump External dimensions L 4500 mm x W 1600 mm x 1700mm 4500 kg with 7 planer/knife heads included

Condition: ready for operation (used), Year of construction: 1990, machine/vehicle number: 8905829, power: 3 kW (4.08 HP), input voltage: 380 V, planing width: 430 mm, total width: 600 mm, total height: 1,200 mm, table length: 2,750 mm, Planing width: max. 430mm, table length 2750mm 4-blade shaft with reversible blade, toothed table lips Blodjuivw Tspfx Ab Ief Chip thickness adjustment via handwheel with magnifying glass display Motor: 3kW, 380V Condition and details see pictures

Condition: good (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 226-60368, total width: 2,200 mm, total height: 2,000 mm, total length: 4,500 mm, overall weight: 4,000 kg, WEINIG PROFIMAT 23 Four-Side Planer - Operating voltage: 380 V - Frequency: 50 Hz - Spindle length – working spindle: 247 mm, jointer spindle: 130 mm, left spindle: 130 mm, top spindle: 240 mm - Tool length – surfacing spindle: 240 mm, jointer spindle: 130 mm, left spindle: 130 mm, top spindle: 240 mm - Spindle diameter on surfacing, jointer, left, and top spindles: 40 mm each - Adjustment travel (axial): 5 mm, radial: 15 mm; jointer spindle: 40 mm axial, 50 mm radial; left spindle: 40 mm axial, 200 mm radial; top spindle: 40 mm axial, 120 mm radial - Max. cutting circle behind fence: 200 mm - Max. cutting circle – working spindle: 145 mm, jointer spindle: 200 mm, left spindle: 200 mm - Distance below table, working spindle: 20 mm, jointer spindle: 15 mm, left spindle: 15 mm - Minimum cutting circle diameter, working spindle: 125 mm, jointer spindle: 100 mm, left and top spindle: 100 mm - Maximum cutting circle diameter, working spindle: 145 mm, jointer spindle: 200 mm, left spindle: 200 mm, top spindle: 200 mm - Spindle speed on all spindles: 6,000 rpm - Extraction connection on all spindles: 140 mm - Max. chip removal on all spindles: 10 mm - 2nd bottom spindle – clamping length: 240 mm, tool length: 240 mm, spindle diameter: 40 mm - Adjustment travel: 35 mm axial, 68 mm radial - Max. cutting circle below table: 200 mm, min. 18 mm - Cutting circle diameter: min. 100 mm, max. 200 mm - RPM: 6,000 - Motor power: 4 – 11 kW - Extraction diameter: 140 mm - Chip removal: from 0 to 0.5 mm - Surfacing table length: 2000/2500 mm - Surfacing table adjustment range, up/down: 10 mm - Jointers fence adjustment range: 10 mm Attention: The item must be collected bindingly between 01. and 10.06.2016, on a date to be arranged. Bjdpfxsyu Iwlj Ab Ielf FCA D-75433 Maulbronn – loaded onto truck

Condition: used, Year of construction: 2001, Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2000 mm Feed speed 5-24 m/min. Weinig Profimat 26 S Four-Sided Planer ..... Summary: - 5 spindles (bottom, right, left, top, bottom) - Common control of the right spindle (axial), top spindle (axial), and glass bead discharge. - Working width (with a 125 mm tool circle) 20 - 230 mm - Working height (with a 125 mm tool circle) 8 - 120 mm Detailed description: 1. SPINDLE ..... - First lower horizontal spindle - Motor with brake 5.5 kW - Diameter 40 mm - Speed ??6,000 rpm - Tool circle 125 - 145 mm - Axial travel 5 mm - Rebating device - Hardened table insert in front of the 1st lower spindle Bodpfx Aboyuzczj Ielf 2. SPINDLE ..... - First right vertical spindle - Motor with brake 7.5 kW Shared motor with left vertical spindle - Diameter 40 mm - Speed ??6,000 rpm - Tool circle 15 mm below table level 100 - 200 mm - Tool circle 40 mm below table level 100 - 180 mm - Max. tool diameter behind stop level 180 mm - Max. groove depth 35 mm - Axial travel 40 mm - Right spindle pneumatically controlled axially (40 mm) via selector switch, max. saw blade diameter 180 mm - Insertion segment 125 mm 3. SPINDLE ..... - First left vertical spindle - Shared motor with 1st right vertical spindle - Diameter 40 mm - Speed ??6,000 rpm - Tool swing circle 15 mm below table level 100 - 200 mm - Tool swing circle 40 mm below table level 100 - 180 mm - Max. Tool diameter behind stop plane 180 mm -Maximum groove depth 35 mm -Axially travel 40 mm -Insert segment 125 mm 4. SPINDLE ..... -First upper horizontal spindle -Motor with brake 7.5 kW -Diameter 40 mm -Speed ??6,000 rpm -Tool swing circle 112 - 200 mm -Maximum groove depth 35 mm -Axially travel 40 mm -Upper horizontal spindle pneumatically controlled axially (40 mm) via selector switch, Max. saw diameter 200 mm -Split pressure shoe in front of upper spindle, adjustable to the tool swing circle and pivoting away from the tool, spring-loaded. - Pneumatically adjustable up/down glazing bead discharge to the upper spindle 5. SPINDLE ..... - Second lower horizontal spindle - Motor with brake 4.0 kW - Diameter 40 mm - Speed ??6,000 rpm - Tooling circle 112 - 200 mm - Maximum groove depth 15 mm All groove spindles dynamically balanced for high concentricity Common control of the right spindle (axial), upper spindle (axial) and glazing bead discharge FEED SYSTEM ..... - Mechanical feed, infinitely variable 5 - 24 m/min. With brake – 2.2 kW -Feed roller in front of the first lower tool, pneumatically controlled "up-down" -Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning -Adjustment travel of the feed rollers relative to the left spindle, axial 35 mm MACHINE ELECTRICAL TECHNOLOGY ..... -Operating voltage 400 volts (voltage range 380–420 volts), 50 Hz -Electrical design according to DIN VDE 0113, electrical equipment of industrial machines EN 60204, IEC 204-1 Other electrical regulations are not c...

Condition: good (used), Weinig Profimat22N Number of spindles: 6 pcs Planing width: 220 mm Planing height: 120 mm Spindle diameter: 40 mm Infeed table length: 2,500 mm Feed motor: 3 kW Spindle arrangement: Bottom 5.5 kW Right Left 11 kW Top 7.5 kW Blodpfx Aeywu R Esb Iof Bottom 7.5 kW Universal 5.5 kW

Condition: new, Surface planer Manufacturer: SCM Model: F5 Year of manufacture: N/A Blsdpfxoywuams Ab Ijf Working width: approx. 50 cm Number of knives: 2 Type of knives: strip planing knives Motor brake: No

Condition: excellent (used), Year of construction: 1976, machine/vehicle number: 163, functionality: fully functional, type of input current: three-phase, planing width: 420 mm, number of blades: 4, total width: 1,400 mm, total height: 1,200 mm, total length: 2,500 mm, chip removal for surfacing (max.): 12 mm, number of planer blades: 2, surfacing fence height: 1,110 mm, surfacing fence length: 180 mm, table length: 2,500 mm, For sale is a Panhans AH410 jointer planer. Year of manufacture: 1976 Machine number: 163 The machine is equipped with a traditional cutter block for strip planer knives. In 2007, the machine was inspected externally prior to acquisition; no faults were identified at that time. Since then, it has only been used in a bow-making workshop and has seen very light use—well below industrial workloads. Bjdpfx Aswyk Rgjb Ijlf Condition: Technically operational Solid, heavy-duty construction (typical of Panhans) Smooth running Known defect: Planing depth display is not functional Accessories: Spare knives included Disassembly, loading, and transport must be organized and paid for by the buyer. Appointments can be arranged by email or phone.

Condition: good (used), Year of construction: 1982, Gebr. Martin Thicknesser Type: T 42 Year of construction: 1982 planing width 630 mm planing height 250 mm Feed rate 8-20 m/min Suction nozzle 160 mm Weight approx. 870 kg Rubberized infeed and outfeed roller Two-knife shaft with strip planer knives Central lubrication Planing height via handwheel adjustment Star-delta switch Location: ex stock 54634 Bitburg: Bljdot U Rn Sjpfx Ab Ief - immediately available -

Condition: excellent (used), Year of construction: 1998, TECHNICAL DATA - Max. working width: 230 mm - Max. working height: 130 mm - 5 spindles: 1) Lower horizontal spindle, 230 mm, 4 kW 2) Right vertical spindle, 130 mm 3) Left vertical spindle, 130 mm (2nd and 3rd spindle), 7.5 kW 4) Upper horizontal spindle, 230 mm, pneumatically adjustable front/rear 5) Lower horizontal spindle, 230 mm, 4 kW - All spindles adjustable (up/down, right/left) - All spindles with electric brake - 4 upper feed rollers, toothed, 2 of which are double - 2 upper outfeed rollers, rubber-coated and smooth - Feed via cardan shaft - Feed motor: 2.2 kW Blodpfx Aoyutyfob Ief - Operating pressure: 6-10 bar - Planing thickness adjustment - Table lubrication - Infeed table length: 1980 mm - Extraction port diameter: 5x140 mm - Dimensions (L/W/H): 4000 x 1800 x 1700 mm - Weight approx. 3,300 kg Ex works - Available at short notice -

Condition: used, Year of construction: 2012, LEADERMAC LMC 523C Four-Sided Planer Year of manufacture: 2012 The machine is equipped with a grooved lower infeed roller, making it suitable for planing wet wood as well. Maximum working dimensions: - width: 230 mm - height: 150 mm Bedpfsywkt Aex Ab Iolf Five cutter heads in the following configuration: - bottom 5.5 kW - right 5.5 kW - left 7.5 kW - top 7.5 kW - bottom 7.5 kW Feed speed steplessly adjustable via inverter: 6 – 24 m/min The machine is in working condition and fully operational.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: K215202, working width: 120 mm, working height: 200 mm, overall weight: 3,500 kg, spindle speed (min.): 2,800 rpm, rotational speed (min.): 6,000 rpm, height adjustment type: mechanical, type of input current: three-phase, For sale: Reignmac RMM520 four-side moulder, 5-head configuration, designed for efficient, high-volume processing of wooden components. The machine is fully operational, carefully prepared for immediate use, and ready to be commissioned by the new owner. The offer includes a complete line with additional buffer magazines at both infeed and outfeed, facilitating material handling and increasing productivity. Technical specifications: - Manufacturer: Reignmac (Reignmac Machinery Co., LTD) - Model: RMM520 - Type: Four-side moulder - Number of heads: 5 - Working width: 20 – 200 mm - Working thickness: 8 – 120 mm - Spindle speed: approx. 6000 RPM - Power supply: 380 V / 50 Hz / 3 phase - Total power: 28.6 kW - Weight: 3500 kg - Year of manufacture: 2010/08 - CE: Yes Feed speed: - Feed speed after upgrades: up to 45 m/min Technical condition: - Machine is 100% fully functional - Ready for operation - On-site inspection at Layman furniture factory recommended (possibility to test in operation) Included equipment: - Reignmac RMM520 (5-head) - Infeed and outfeed buffer magazines - Safety guards with inspection windows - Control panel - Extraction system connections Important information: - Machine is sold without cutters / cutting tools Applications: - Drawer sides and furniture components Blsdpfx Abeywkk Uo Isf - Mouldings, rails, blanks - Wooden elements for further processing On-site inspection at the company is possible. Forklift loading available. Please contact us for more information.

Condition: excellent (used), Year of construction: 2004, Weinig Profimat 26 Fortec Bjdoywidtspfx Ab Ijlf Year of manufacture: 2004 Planing width: 230 mm (can be equipped with heads up to 245 mm) Planing height: 130 mm Infeed table length: 2,500 mm Spindle diameter: 40 mm Feed motor: 3 kW Automatic positioning of spindles 3 and 4 Spindle arrangement: Bottom 7.5 kW Right Left 11 kW Top 11 kW Bottom 7.5 kW

Condition: good (used), Year of construction: 2011, Weinig Unimat 500 Year of manufacture: 2011 Working width: 230 mm Working height: 120 mm Spindle diameter: 40 mm Infeed table: 2,000 mm Number of rollers in table: 2 powered units, 150 mm wide Feed speed: 5 - 30 m/min Feed motor: 5 kW Memory function 3 radial CNC-controlled adjustments for spindles 3, 5, and 6 Spindle arrangement: Bottom: 7.5 kW Right Left: 7.5 kW Right: 5.5 kW Top: 7.5 kW Top: 7.5 kW Bottom: 11 kW Bodsywiabepfx Ab Islf

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, 5-SPINDLE MOULDER WEINIG MOD. UNIMAT 500- USED - Composition: 1st lower horizontal spindle 2nd right vert. 3rd left vert. 4th upper horizontal spindle 5th lower horizontal spindle - Complete with MEMORY SYSTEM - Width 230 mm Bjdpfx Absywflys Ielf - PTO drive - Short workpiece device - Ribbed table - Year 2002 - CE standards

Condition: used, Year of construction: 1991, machine/vehicle number: 78-08/093-91, functionality: fully functional, planing width: 400 mm, Combined Planer Thicknesser Felder AD 6-41 Year of manufacture: 1991 S/N 78-08/093-91 In good condition Planing specifications Planing width: 410 mm Thicknessing width: 404 mm Thicknessing height: approx. 4 – 220 mm Blodpfx Abjywfbus Ief Maximum chip removal: 5 mm Cutter block / cutting data Cutter block diameter: approx. 86 mm Number of knives: 2 Cutter block speed: approx. 4,700 rpm Table / Construction Total length of planing tables (standard): approx. 1,680 mm Feed Feed speed: stepless, approx. 6.5 m/min with digital height adjustment Electrical data Motor power: 4.0 kW (5.5 HP) Voltage: 400 V three-phase (typical for this series) Extraction connection approx. 120 mm Weight approx. 800 kg

Condition: good (used), Year of construction: 1993, functionality: fully functional, working width: 230 mm, planing height: 170 mm, spindle diameter: 50 mm, planing width: 230 mm, working height: 170 mm, power of feed motor: 7,500 W, height adjustment type: electric, planer shaft diameter: 50 mm, number of spindles: 8, input frequency: 50 Hz, Equipment: cabin, motor brake, 8 spindles, Working width: 230 mm, working height: 180 mm, spindle diameter: 50 mm, feed rate: 7.5 kW / 6 - 36 m/min, Spindle arrangement: 1-bottom (7.5 kW) - scoring spindle 2-bottom (7.5 kW) 3-Right (11 kW) 4-Left ( 11 kW) Bedpfor Axwnex Ab Ielf 5-Top (11.0 kW) 6-Bottom (22.0 kW) 7-Bottom (7.5 kW) 8-Top (7.5 kW) 8 driven rollers in the table

Condition: used, Year of construction: 1985, machine/vehicle number: 2979/4, functionality: fully functional, power: 5.52 kW (7.51 HP), input voltage: 380 V, We are offering this used OKOMA DM63 thickness planer, year of manufacture approx. 1985. Bjdpfx Ajywdqbjb Ijlf • Motor power: 7.5 HP • Segmented feed rollers • 4-knife cutterhead • Feed rate: 7–35 mm, infinitely variable If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: used, Year of construction: 1992, working width: 520 mm working height: 250 mm cutter head: strip-knive number of blades: 4 height adjustment: electrically read out workpiece thickness: scale feed speed: 2 speeds infeed roller: steel outfeed roller: steel table roller: yes motor power: 5,5 kW suction connection: 140mm machine length: 1200 mm machine width: 1400 mm Bodpfx Abeyt E Ras Ielf weight: ca. 900kg

Condition: excellent (used), Year of construction: 2008, operating hours: 8,000 h, Four-sided planer Weinig Model Powermat 400 LE - machine with ribbed table Year of manufacture: 2008 Operating hours: 8000 Maximum working width: 230 mm Maximum working height: 120 mm The machine is equipped with 5 spindles featuring the Powerlock system Spindle configuration: - bottom 5.5 kW - left and right – 7.5 kW each Bljdpfowybrnex Ab Ief - top – 7.5 kW - bottom – 7.5 kW Spindle speed: 6000 rpm Feed speed steplessly adjustable via inverter: 5 – 30 m/min Electronic spindle positioning – Memory system The machine is in very good technical condition, complete with cutter heads.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Four-side planer WEINIG UNIMAT SUPER 4 Year of manufacture: 2003 TECHNICAL DATA: Bjdeyivilepfx Ab Ijlf - min / max width of workpiece: 45 / 150 mm - min / max height of workpiece: 15 / 50 mm 3 spindles: 1) lower horizontal 11 kW 2) upper horizontal 18.5 kW 3) lower horizontal 5.5 kW spindle diameter: 40 mm

Condition: like new (used), Year of construction: 2007, operating hours: 50 h, functionality: fully functional, SCM SUPERSET XL Four-Sided Planer Year of manufacture: 2007 The machine has only operated for 50 hours, it is practically like new. Technical specifications: • Working width up to 240 mm • Working height up to 120 mm • Spindle speed: 6000 rpm • Stepless feed adjustment: 5–25 m/min • Spindle configuration (5 spindles): - bottom 7.5 kW - right 7.5 kW Bedpfx Aeyhhx Nsb Islf - left 7.5 kW - top 7.5 kW - bottom 7.5 kW • All tool spindles have independent motors The machine is equipped with 2 vertical spindles (2 and 3) with HSK85S quick couplings.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, working width: 180 mm, planing height: 120 mm, spindle diameter: 40 mm, planing width: 180 mm, overall weight: 1,550 kg, power of feed motor: 4 W, spindle speed (min.): 6,000 rpm, jointer table length: 2,000 mm, 4-SIDE MOULDING MACHINE with 5 spindles Max working width : 180 mm Max. working heigth : 120 mm Bedpfx Aov Em S Sjb Ielf Spindles diameter 40 mm Spindles rotation : 6000 r.p.m. 4 spiral HM tools included Adjustable feed speed from 5 to 27 mts(min. V° spindle universal 5,5,HP ( 4 kW) Machine weight : 1550 kg Overall dimensions : 3780 x 1550 x 1400 mm Machine in very good conditions

Condition: good (used), Year of construction: 1992, For sale is a used Kity AD-310 surface planer and thicknesser with a planing height of up to 230 mm. The machine is in good condition and has been serviced and inspected by our professional staff. Technical data: - 3-knife cutter block - Planing width: 310 mm - Surface planer table length: 1550 mm - Max. workpiece thickness: 230 mm Bsdoyttckspfx Ab Ijlf - Includes mortising attachment - Motor power: 2.2 kW / 3 HP - Year of manufacture: 1992 The machine is located in A-5431 Kuchl and can be inspected during our business hours at any time. Related terms: surface planer, thicknesser, planer, planing, thicknessing Reference: R-Y00MG