Accessories and spare parts for sale
Your location was not identified (Edit)
1
table insert
Pos - No. 18
Puw32u
manufactured by Weinig
table insert 1 piece
220 x 115 x 30 mm
located in 97447 Gerolzhofen
sale in current condition. as seen. Without examination.
- free on truck -
5
Machine Condition: Used
Bipa code: 920013
Manufacturer: Friulmac
Model: FN3
Machine Condition: Used
Bhnpbxn0vl
3
Groove cutter for tongue and groove consisting of:
2 cutters / intermediate rings / hydro bush,
d = 50 mm,
total length: 110 mm,
D8hjlyp
D = approx.190 mm,
profile height = approx. 55 mm (2 x 29mm),
groove size = approx. 5 x 8 mm.
2
1 x Elektronic Motor Braking Unit
Power range 3 - 15KW
Voltage range 200-575V
Power frequency 50Hz/60Hz
Br8vunit3r
Siemens EMG 15
3
Weinig feeder EM-4
very good condition
Br9shbrgao
6
Feed rollers new for Waco high performance planing machine
outer diameter: 250 mm
inner diameter: 180 / 220 mm
width: 100 mm
2 pieces smooth
1 piece 90° corrugated
1 piece 45° corrugated
Ksyyg8kx
1
table insert
Pos - No. 17
manufactured by Weinig
table insert 1 piece
180 x 115 x 30 mm
located in 97447 Gerolzhofen
sale in current condition. as seen. Without examination.
- free on truck -
Bn0mg82t9r
3
Machine condition: New
Bipa Code: 700103N
Manufacturer: Facom
Dbkg7rcbs
Model: /
Machine Condition: New
3
Groove cutter for tongue and groove consisting of:
2 cutters / intermediate rings / hydro bush,
d = 50 mm,
Yklt0
total length: 110 mm,
D = approx.200 mm,
profile height = approx. 60 mm (2 x 30mm),
groove size = approx. 8 x 15 mm.
2
1 x Elektronic Motor Braking Uniat
Power range 3 - 15KW
Voltage range 200-575V
Power frequency 50Hz/60Hz
Epppm02ao
Siemens EMG 15
Motor brake for Weinig machine
2
For REX planing machines, chamfering machines:
- top left (1 pc.) HS 140x15x30, Z4
- top right (1 pc.) HS 140x15x30, Z4
- lower left (1 piece) HS 194x17.5x50, Z4
- lower right (1 piece) HS 194x17.5x50, Z4
Bcv0jxrlkh
10
1 gebr. infeed roller conveyor and accelerator for planing machine
for board lengths up to 6 m
Baoomjr3
Feed speed: approx. 100m / min. for timber length 4m+
1
table inserts
Pos - No. 6
manufactured by Weinig
Ok7yn
table inserts 2 piece
180 x 155 x 30 mm
located in 97447 Gerolzhofen
sale in current condition. as seen. Without examination.
- free on truck -
6
Machine condition: Used
Bipa Code: 900098
Manufacturer: Friulmac
Model: FN3
Bogwia9bnw
Machine condition: Used
3
Planing head / Joining knife head Leitz,
60 x 200 x 50 mm, Z6,
reversible blade,
MECH,
Bsexcnli
Available: 2,
Price per piece: 100,00 € + VAT.
Subject to prior sale.
3
New coating of SCM feed rollers.D 140 mmWidth: various widthsCoating with rubber, brown
Bersdkae
2
Description: For REX planing machines, chamfering machines:
- top left (1 pc.) HS 140x15x30, Z4
Nfrbx
- top right (1 pc.) HS 140x15x30, Z4
- lower left (1 piece) HS 194x17.5x50, Z4
- lower right (1 piece) HS 194x17.5x50, Z4
4
Weinig hydro planer block.
50mm bore
Z=12
n max 7500rpm
195mm block dia.
230mm wide block.
shipping weight of 42kg
Complete and original .
Excellent condition, surplus to requirements. Can be packaged on a small pallet and loaded onto courier.
Iekx7nr
1
table insert
Pos - No. 16
manufactured by Weinig
table insert 1 piece
180 x 170 x 30 mm
Lgb8n2do
located in 97447 Gerolzhofen
sale in current condition. as seen. Without examination.
- free on truck -
8
Machine condition: Overhauled
Year of revision: 2020
N3sz2
Bipa Code: 800074
Manufacturer: Weinig
Model: U17N
Machine condition: Overhauled
Year of revision: 2020
Moulder brand Weinig model Unimat U17N with 6+1 axes, length 170 mm. axes, with striped bench, cardan drive. Composition of axles: Lower, right, left, upper, lower, universal. Axle motor power : 4+3+5,5+4+5,5+5,5 Kw.
2
Set of grooving cutters LEUCO,
MECH, d = 30 mm,
cutter width 18 mm each,
Bscidnmqyu
keyway = 8 x 5 mm,
total height: 110 mm.
2
Toothed rollers for planing machines (SCM).
POS. 1
Serrated steel roller for SCM. New
Diameter: D 120 mm
Width: B 50 mm
Bbx8y2ehya
Bore: d 30 mm with clamping piece.
POS. 2
Serrated steel roller for SCM, new
Diameter: D 120 mm
Width: B 20 mm
Bore: d 30 mm with clamping piece.
We deliver-toothed steel rollers for all planing machines.
For example, for:
Weinig, Harbs, Garner, SCM, Wadkin, shipping boom, Guilliert,.
H + K, Chuet, TSN, Leadermac Lestro, etc.
2
WEINIG Push-on pendulum
Bns8b7hyqn
5
offer Strip Planer Blades carbide tipped, new
in the following dimensions:
Dxg7oq
2 x 210 mm
6 x 260 mm
6 x 310 mm
4 x 350 mm
16 x 400 mm
4 x 610 mm
Unit price
1
table insert
Pos - No. 15
manufactured by Weinig
table insert 1 piece
180 x 115 x 30 mm
located in 97447 Gerolzhofen
sale in current condition. as seen. Without examination.
- free on truck -
Eefsuhl
9
Machine Condition: Used
Bhxmrlbigv
Bipa Code: 900104
Manufacturer: Gubish
Model: /
Machine Condition: Used
Moulder brand Gubish equipped for squared machining from 25×25 or 20×20 for round production diam. 18mm. Shafts composition: lower 3kw, right 3kw, left 5,5kw, right 4kw, upper 5,5kw, lower 3kw. Towing 1.5kw. Used, tested.
5
Lot grooving cutter LEUCO,
MECH, d = 30 mm,
cutter width 18 mm each,
keyway = 8 x 5 mm,
Brhg8amf
total height: 110 mm.
10
Hydraulik Aggregat / Hydraulikpumpe
Fabrikat VICKERS (Bad Homburg)
Auftrag no. 620107A
Modell PVB10 RSY 30 CM 11
Baujahr 1973 (Motor Typenschild)
Hydraulikaggregat 5,5 kW
Tankinhalt 150 Liter
Nenndruck 105 kg/cm²
Max. Druck 210 kg/cm²
Max. Drehzahl 34200 U/min.
Fördervolumen 21,1 cm³/U
Abmessungen
Bmmmrudazo
1000 mm x 530 mm x H 950 mm
11
1 lot planing heads, milling cutters, hydro bushings
Drill hole: 50 mm
Special profiles like: rhombus, alternating rebate, double tongue and groove, corrugated boards
Bjv89t7xby
15
Part of Waco spareparts for sale
Bdq922zxea
1
guide rail
Pos - No. 104
manufactured by Weinig
guide rail 1 piece
length ca. 400 mm
located in 97447 Gerolzhofen
sale in current condition. as seen. Without examination.
Endv7aj
- free on truck -
8
Machine Condition: Used
Bipa Code: 920019
Manufacturer: Gubish
Bhwxbgwj0q
Model: /
Machine Condition: Used
3
Set of feed rollers,
steel, feed roller, feed roller,
Bsch0pjh9w
toothed, 135 x 20 x 35 mm,
set of 7 pieces,
as good as new, very good or sharpened.
2
Weinig/Wadkin/Forman/Leugo cutterblocks, detailed information in the attached PDF file.
7sohwm0xy
5
Spare parts and service for all Gubisch planing machines, angular machines and window production lines.
Clyhzftg
Please indicate machine type, machine number and year of manufacture.
2
Zusatzeinheit fuer Kupfermuehle Hobelmaschine
Horizontale Zusatzeinheit
Yys3v9wpy
Unter Tisch arbeitend
Spindellaenge 300 mm
Motor Leistung 4 kW
1
table insert
Pos - No. 22
manufactured by Weinig
table insert 1 piece
200 x 120 x 30 mm
Ok797
located in 97447 Gerolzhofen
sale in current condition. as hout examination.
- free on truck -
9
Condition of the machine: Used, tested
Bipa code: 920017
Manufacturer: Gubish
Model: /
Condition of the machine: Used, tested
Nwnor
Moulder brand Gubish already equipped for machining squares 45x45mm for production round diameter 41mm. Shafts composition: lower, right, left, upper, lower. Used, tested.
6
Feed roller copper mill,
Total length approx. 800 mm,
Bq8i0xth
width toothed = 540 mm, D = 130 mm.
5
About 100 different cutterheads for planers / moulders on stock for e.g. Weinig Hydromat, REX, Kupfermuhle or Waco planers moulders.
Vs77x3
8
SPARE PARTS for SPANEVELLO - A.COSTA moulders like steel and rubber feed rollers - different size, also for SCM and WENIG moulders.
Fw0ddt7
4
Zubehör zu Kupfermühle Vierseitenhobelmaschine
Bh9tuztdvq
Fräs- oder Hobelwelle
Aggregat mit Motor
Welle Durchmesser 35 mm
Motorstärke 7,5 kW
1
surfacing table lip plate
Pos - No. 86
manufactured by Weinig
surfacing table lip plate 1 piece
located in 97447 Gerolzhofen
sale in current condition. as seen. Without examination.
- free on truck -
Lgk3rd3m
10
Machine Condition: Used
Bipa code: 800075
Manufacturer: Weinig
B0q7aa2m
Model: Unimat U17N
Machine condition: Used
Moulder brand Weinig model Unimat U17N with 6 axles, axis length 170 mm., with smooth table, cardan drive. Complete with cab. Axles composition: Lower, right, left, upper, upper, lower. Axles motor power : 3+3+4+5,5+3 Kw.
Towing motor power 4 Kw lift and lower 0,75 Kw. Overall dimensions 500×200 h 164 cm. weight about 30 qt. Used.
2
Pulley Weinig,
d: 38 mm, D: 215 mm,
keyway: 10 x 5 mm,
Cy9phxcs
total length: 130 mm,
Part number: 323028005.
3
Zubehör zu Kupfermühle Vierseitenhobelmaschine
Sägewelle
Welle Durchmesser 35 mm
Gwabns
1
guide rail
Ys0fus
Pos - No. 107
manufactured by Weinig
guide rail 1 piece
length ca. 490 mm
located in 97447 Gerolzhofen
sale in current condition. as seen. Without examination
- free on truck -
4
Condition of the machine: Used, working
Bipa Code: 011068
Manufacturer: Friulmac
Jiccz0b
Model: FN3
Condition of the machine: Used, working
4
Check valve Weinig for working width: 230 mm,
flange approx: 155 x 107 mm.
Brsakeudyq