Condition: good (used), functionality: fully functional, working width: 260 mm, planing height: 170 mm, spindle diameter: 40 mm, planing width: 260 mm, working height: 170 mm, power of feed motor: 4,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, type of input current: three-phase, shaft diameter: 40 mm, number of spindles: 5, input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Profimat 23 E Working width: 260 mm, Bsdpfx Aoyc Nubsb Isda Working height: 170 mm, 5 spindles, Spindle diameter: 40 mm, Spindle configuration: 1- Bottom - 5.5 kW 2- Right + 3- Left - 11 kW 4- Top - 5.5 kW 5- Bottom - 11 kW Feed speed: 6 – 24 m/min - 4 kW Air cushion in the table One powered roller in the table at the outfeed. Comes with tooling.

Condition: excellent (used), Four-side planer Weinig Profimat 26S Working width: 230 mm Bdsdpfx Aboyvhkij Ija Working height: 130 mm Number of spindles: 6 Spindle configuration: Bottom Left Right Right Top Bottom Feed speed adjustable by variator CE certificate Technical documentation

Condition: refurbished (used), 1 x Elektronic Motor Braking Unit Bdedpfsyvhftex Ab Isa Power range 3 - 15KW Voltage range 200-575V Power frequency 50Hz/60Hz Siemens EMG 15

Year of construction: 2021, condition: as good as new (ex-display), Due to order cancellation 2 x new Tersa planing heads D140x130x50 All original Swiss Made. It doesn't get any cheaper! Bdedpfx Ajyvhcrob Iea One-time super cheap set offer

Condition: like new (used), Year of construction: 2005, functionality: fully functional, working width: 230 mm, planing height: 120 mm, planer shaft diameter: 40 mm, workpiece height (max.): 120 mm, Weinig Unimat 300 — 4-sided planer 230 x 120 mm Bedpfxoyvhcfe Ab Ioda Although from 2005, this machine is practically like new! Rarely have we seen one so little used. Looking for an almost-new 4-spindle planer but don’t have the budget for a new one? This Unimat 300 is the perfect pick!

Condition: as good as new (ex-display), Year of construction: 2025, Double side planer (Double Surface Planer ) extra wide 400 mm Maximum working width 400 mm Maximum working height 200 mm Heavy cardan feed system Special spike feedsystem Unlike the conventional chain drive systems, this machine employs a patented synchronized transmission system along the four fitting columns. Electronic height adjustment Spiral cutterheads top and bottom Bodsyvhbnopfx Ab Ioda Latest generation IE-3 motors Spindle and feed brakes CE

Condition: good (used), Year of construction: 1979, functionality: fully functional, Four-sided planer / moulder Unimat 22N, 7 spindles Year of manufacture 1979 S/N 286512746 Manufacturer Weinig Germany planing width 220mm Planing height 120 mm 7 planer shanks: planing table length 2000mm Spindle arrangement (speed of the working spindles 6000 rpm) 1. bottom, 4 kW 2. left, 5,5kW 3. right, 7.5 kW 4. left, 4 kW 5. top, 7.5 kW 6. bottom, 7.5 kW 7. bottom, 4.0 kW Bdsdjt Eu Htepfx Ab Ija 5, 6, 7 with counter bearing 3 rollers in the table (not driven) spindle diameter 40 mm Flying circle of the dressing spindle 125mm Flying circle of the dressing spindle 100-180mm Largest flying circle of the milling spindles 180mm Cardanic feed Feed infinitely variable (frequency converter) 6-36 m /min. Manual Waxilit pump External dimensions L 4500 mm x W 1600 mm x 1700mm 4500 kg with 7 planer/knife heads included

Condition: ready for operation (used), Year of construction: 1990, machine/vehicle number: 8905829, power: 3 kW (4.08 HP), input voltage: 380 V, planing width: 430 mm, total width: 600 mm, total height: 1,200 mm, table length: 2,750 mm, Planing width: max. 430mm, table length 2750mm 4-blade shaft with reversible blade, toothed table lips Chip thickness adjustment via handwheel with magnifying glass display Motor: 3kW, 380V Bdedpfsuivw Tex Ab Ija Condition and details see pictures

Condition: good (used), Year of construction: 2020, functionality: fully functional, Length approx. 2250 mm, width/depth approx. 1370 mm Weight approx. 695 kg, Jointer: Maximum chip removal 5 mm Extraction connection: Extraction nozzle Ø120 mm Thickness planer: Working height min. 3 mm Working height max. 240 mm Minimum workpiece length 220 mm Maximum chip removal 5 mm Drive motor power 7 kW Bdodpjykaqcefx Ab Ioa Connection voltage 400 V Mains frequency 50 Hz Planer shaft type TERSA 4 planer knives Speed 5000 rpm Maximum planing width 520 mm Feed: Feed speeds 5/8/12/18 m/min Very good condition Available around September 2026 Shipping possible at extra cost!

Condition: good (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 226-60368, total width: 2,200 mm, total height: 2,000 mm, total length: 4,500 mm, overall weight: 4,000 kg, WEINIG PROFIMAT 23 Four-Side Planer Bedpfxjyu Iwlj Ab Ieda - Operating voltage: 380 V - Frequency: 50 Hz - Spindle length – working spindle: 247 mm, jointer spindle: 130 mm, left spindle: 130 mm, top spindle: 240 mm - Tool length – surfacing spindle: 240 mm, jointer spindle: 130 mm, left spindle: 130 mm, top spindle: 240 mm - Spindle diameter on surfacing, jointer, left, and top spindles: 40 mm each - Adjustment travel (axial): 5 mm, radial: 15 mm; jointer spindle: 40 mm axial, 50 mm radial; left spindle: 40 mm axial, 200 mm radial; top spindle: 40 mm axial, 120 mm radial - Max. cutting circle behind fence: 200 mm - Max. cutting circle – working spindle: 145 mm, jointer spindle: 200 mm, left spindle: 200 mm - Distance below table, working spindle: 20 mm, jointer spindle: 15 mm, left spindle: 15 mm - Minimum cutting circle diameter, working spindle: 125 mm, jointer spindle: 100 mm, left and top spindle: 100 mm - Maximum cutting circle diameter, working spindle: 145 mm, jointer spindle: 200 mm, left spindle: 200 mm, top spindle: 200 mm - Spindle speed on all spindles: 6,000 rpm - Extraction connection on all spindles: 140 mm - Max. chip removal on all spindles: 10 mm - 2nd bottom spindle – clamping length: 240 mm, tool length: 240 mm, spindle diameter: 40 mm - Adjustment travel: 35 mm axial, 68 mm radial - Max. cutting circle below table: 200 mm, min. 18 mm - Cutting circle diameter: min. 100 mm, max. 200 mm - RPM: 6,000 - Motor power: 4 – 11 kW - Extraction diameter: 140 mm - Chip removal: from 0 to 0.5 mm - Surfacing table length: 2000/2500 mm - Surfacing table adjustment range, up/down: 10 mm - Jointers fence adjustment range: 10 mm Attention: The item must be collected bindingly between 01. and 10.06.2016, on a date to be arranged. FCA D-75433 Maulbronn – loaded onto truck

Condition: used, Year of construction: 2001, Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2000 mm Feed speed 5-24 m/min. Weinig Profimat 26 S Four-Sided Planer ..... Summary: - 5 spindles (bottom, right, left, top, bottom) - Common control of the right spindle (axial), top spindle (axial), and glass bead discharge. - Working width (with a 125 mm tool circle) 20 - 230 mm - Working height (with a 125 mm tool circle) 8 - 120 mm Detailed description: 1. SPINDLE ..... - First lower horizontal spindle - Motor with brake 5.5 kW - Diameter 40 mm - Speed ??6,000 rpm - Tool circle 125 - 145 mm - Axial travel 5 mm - Rebating device - Hardened table insert in front of the 1st lower spindle 2. SPINDLE ..... - First right vertical spindle - Motor with brake 7.5 kW Shared motor with left vertical spindle - Diameter 40 mm - Speed ??6,000 rpm - Tool circle 15 mm below table level 100 - 200 mm - Tool circle 40 mm below table level 100 - 180 mm - Max. tool diameter behind stop level 180 mm - Max. groove depth 35 mm - Axial travel 40 mm - Right spindle pneumatically controlled axially (40 mm) via selector switch, max. saw blade diameter 180 mm - Insertion segment 125 mm 3. SPINDLE ..... - First left vertical spindle - Shared motor with 1st right vertical spindle - Diameter 40 mm - Speed ??6,000 rpm - Tool swing circle 15 mm below table level 100 - 200 mm - Tool swing circle 40 mm below table level 100 - 180 mm - Max. Tool diameter behind stop plane 180 mm -Maximum groove depth 35 mm -Axially travel 40 mm -Insert segment 125 mm 4. SPINDLE ..... -First upper horizontal spindle -Motor with brake 7.5 kW -Diameter 40 mm -Speed ??6,000 rpm -Tool swing circle 112 - 200 mm -Maximum groove depth 35 mm -Axially travel 40 mm -Upper horizontal spindle pneumatically controlled axially (40 mm) via selector switch, Max. saw diameter 200 mm -Split pressure shoe in front of upper spindle, adjustable to the tool swing circle and pivoting away from the tool, spring-loaded. - Pneumatically adjustable up/down glazing bead discharge to the upper spindle Bsdpeyuzczefx Ab Ijda 5. SPINDLE ..... - Second lower horizontal spindle - Motor with brake 4.0 kW - Diameter 40 mm - Speed ??6,000 rpm - Tooling circle 112 - 200 mm - Maximum groove depth 15 mm All groove spindles dynamically balanced for high concentricity Common control of the right spindle (axial), upper spindle (axial) and glazing bead discharge FEED SYSTEM ..... - Mechanical feed, infinitely variable 5 - 24 m/min. With brake – 2.2 kW -Feed roller in front of the first lower tool, pneumatically controlled "up-down" -Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning -Adjustment travel of the feed rollers relative to the left spindle, axial 35 mm MACHINE ELECTRICAL TECHNOLOGY ..... -Operating voltage 400 volts (voltage range 380–420 volts), 50 Hz -Electrical design according to DIN VDE 0113, electrical equipment of industrial machines EN 60204, IEC 204-1 Other electrical regulations are not c...

Condition: good (used), Weinig Profimat22N Number of spindles: 6 pcs Planing width: 220 mm Planing height: 120 mm Spindle diameter: 40 mm Infeed table length: 2,500 mm Feed motor: 3 kW Spindle arrangement: Bottom 5.5 kW Right Left 11 kW Top 7.5 kW Bottom 7.5 kW Universal 5.5 kW Bedpfxeywu R Es Ab Ijda

Condition: new, Surface planer Manufacturer: SCM Bdjdpfx Asywuamsb Ija Model: F5 Year of manufacture: N/A Working width: approx. 50 cm Number of knives: 2 Type of knives: strip planing knives Motor brake: No

Condition: excellent (used), Year of construction: 1976, machine/vehicle number: 163, functionality: fully functional, type of input current: three-phase, planing width: 420 mm, number of blades: 4, total width: 1,400 mm, total height: 1,200 mm, total length: 2,500 mm, chip removal for surfacing (max.): 12 mm, number of planer blades: 2, surfacing fence height: 1,110 mm, surfacing fence length: 180 mm, table length: 2,500 mm, For sale is a Panhans AH410 jointer planer. Year of manufacture: 1976 Machine number: 163 The machine is equipped with a traditional cutter block for strip planer knives. In 2007, the machine was inspected externally prior to acquisition; no faults were identified at that time. Since then, it has only been used in a bow-making workshop and has seen very light use—well below industrial workloads. Condition: Technically operational Solid, heavy-duty construction (typical of Panhans) Smooth running Known defect: Planing depth display is not functional Accessories: Spare knives included Bsdpfswyk Rgex Ab Ioda Disassembly, loading, and transport must be organized and paid for by the buyer. Appointments can be arranged by email or phone.

Condition: good (used), Year of construction: 1982, Gebr. Martin Thicknesser Type: T 42 Year of construction: 1982 planing width 630 mm Bdjdpfjt U Rn Sjx Ab Ioa planing height 250 mm Feed rate 8-20 m/min Suction nozzle 160 mm Weight approx. 870 kg Rubberized infeed and outfeed roller Two-knife shaft with strip planer knives Central lubrication Planing height via handwheel adjustment Star-delta switch Location: ex stock 54634 Bitburg: - immediately available -

Condition: excellent (used), Year of construction: 1998, TECHNICAL DATA - Max. working width: 230 mm - Max. working height: 130 mm - 5 spindles: Bdsdeyutyfopfx Ab Isa 1) Lower horizontal spindle, 230 mm, 4 kW 2) Right vertical spindle, 130 mm 3) Left vertical spindle, 130 mm (2nd and 3rd spindle), 7.5 kW 4) Upper horizontal spindle, 230 mm, pneumatically adjustable front/rear 5) Lower horizontal spindle, 230 mm, 4 kW - All spindles adjustable (up/down, right/left) - All spindles with electric brake - 4 upper feed rollers, toothed, 2 of which are double - 2 upper outfeed rollers, rubber-coated and smooth - Feed via cardan shaft - Feed motor: 2.2 kW - Operating pressure: 6-10 bar - Planing thickness adjustment - Table lubrication - Infeed table length: 1980 mm - Extraction port diameter: 5x140 mm - Dimensions (L/W/H): 4000 x 1800 x 1700 mm - Weight approx. 3,300 kg Ex works - Available at short notice -

Condition: used, Year of construction: 2012, LEADERMAC LMC 523C Four-Sided Planer Year of manufacture: 2012 The machine is equipped with a grooved lower infeed roller, making it suitable for planing wet wood as well. Bdsdpfsywkt Aox Ab Ija Maximum working dimensions: - width: 230 mm - height: 150 mm Five cutter heads in the following configuration: - bottom 5.5 kW - right 5.5 kW - left 7.5 kW - top 7.5 kW - bottom 7.5 kW Feed speed steplessly adjustable via inverter: 6 – 24 m/min The machine is in working condition and fully operational.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: K215202, working width: 120 mm, working height: 200 mm, overall weight: 3,500 kg, spindle speed (min.): 2,800 rpm, rotational speed (min.): 6,000 rpm, height adjustment type: mechanical, type of input current: three-phase, For sale: Reignmac RMM520 four-side moulder, 5-head configuration, designed for efficient, high-volume processing of wooden components. The machine is fully operational, carefully prepared for immediate use, and ready to be commissioned by the new owner. Bedpfsywkk Uex Ab Ieda The offer includes a complete line with additional buffer magazines at both infeed and outfeed, facilitating material handling and increasing productivity. Technical specifications: - Manufacturer: Reignmac (Reignmac Machinery Co., LTD) - Model: RMM520 - Type: Four-side moulder - Number of heads: 5 - Working width: 20 – 200 mm - Working thickness: 8 – 120 mm - Spindle speed: approx. 6000 RPM - Power supply: 380 V / 50 Hz / 3 phase - Total power: 28.6 kW - Weight: 3500 kg - Year of manufacture: 2010/08 - CE: Yes Feed speed: - Feed speed after upgrades: up to 45 m/min Technical condition: - Machine is 100% fully functional - Ready for operation - On-site inspection at Layman furniture factory recommended (possibility to test in operation) Included equipment: - Reignmac RMM520 (5-head) - Infeed and outfeed buffer magazines - Safety guards with inspection windows - Control panel - Extraction system connections Important information: - Machine is sold without cutters / cutting tools Applications: - Drawer sides and furniture components - Mouldings, rails, blanks - Wooden elements for further processing On-site inspection at the company is possible. Forklift loading available. Please contact us for more information.

Condition: excellent (used), Year of construction: 2004, Weinig Profimat 26 Fortec Year of manufacture: 2004 Planing width: 230 mm (can be equipped with heads up to 245 mm) Planing height: 130 mm Infeed table length: 2,500 mm Spindle diameter: 40 mm Feed motor: 3 kW Automatic positioning of spindles 3 and 4 Spindle arrangement: Bottom 7.5 kW Right Left 11 kW Bedpfoywidtsx Ab Isda Top 11 kW Bottom 7.5 kW

Condition: good (used), Year of construction: 2011, Weinig Unimat 500 Year of manufacture: 2011 Working width: 230 mm Working height: 120 mm Spindle diameter: 40 mm Infeed table: 2,000 mm Number of rollers in table: 2 powered units, 150 mm wide Feed speed: 5 - 30 m/min Feed motor: 5 kW Memory function 3 radial CNC-controlled adjustments for spindles 3, 5, and 6 Spindle arrangement: Bottom: 7.5 kW Right Left: 7.5 kW Right: 5.5 kW Bodpfx Abeywiabe Isda Top: 7.5 kW Top: 7.5 kW Bottom: 11 kW

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, 5-SPINDLE MOULDER WEINIG MOD. UNIMAT 500- USED - Composition: 1st lower horizontal spindle 2nd right vert. 3rd left vert. 4th upper horizontal spindle Bdedpfxsywflyo Ab Ioa 5th lower horizontal spindle - Complete with MEMORY SYSTEM - Width 230 mm - PTO drive - Short workpiece device - Ribbed table - Year 2002 - CE standards

Condition: used, Year of construction: 1991, machine/vehicle number: 78-08/093-91, functionality: fully functional, planing width: 400 mm, Combined Planer Thicknesser Felder AD 6-41 Year of manufacture: 1991 S/N 78-08/093-91 Bdjdpjywfbujfx Ab Iea In good condition Planing specifications Planing width: 410 mm Thicknessing width: 404 mm Thicknessing height: approx. 4 – 220 mm Maximum chip removal: 5 mm Cutter block / cutting data Cutter block diameter: approx. 86 mm Number of knives: 2 Cutter block speed: approx. 4,700 rpm Table / Construction Total length of planing tables (standard): approx. 1,680 mm Feed Feed speed: stepless, approx. 6.5 m/min with digital height adjustment Electrical data Motor power: 4.0 kW (5.5 HP) Voltage: 400 V three-phase (typical for this series) Extraction connection approx. 120 mm Weight approx. 800 kg

Condition: good (used), Year of construction: 1993, functionality: fully functional, working width: 230 mm, planing height: 170 mm, spindle diameter: 50 mm, planing width: 230 mm, working height: 170 mm, power of feed motor: 7,500 W, height adjustment type: electric, planer shaft diameter: 50 mm, number of spindles: 8, input frequency: 50 Hz, Equipment: cabin, motor brake, 8 spindles, Working width: 230 mm, working height: 180 mm, spindle diameter: 50 mm, Bjdpfx Abor Axwne Ijda feed rate: 7.5 kW / 6 - 36 m/min, Spindle arrangement: 1-bottom (7.5 kW) - scoring spindle 2-bottom (7.5 kW) 3-Right (11 kW) 4-Left ( 11 kW) 5-Top (11.0 kW) 6-Bottom (22.0 kW) 7-Bottom (7.5 kW) 8-Top (7.5 kW) 8 driven rollers in the table

Condition: used, Year of construction: 1985, machine/vehicle number: 2979/4, functionality: fully functional, power: 5.52 kW (7.51 HP), input voltage: 380 V, We are offering this used OKOMA DM63 thickness planer, year of manufacture approx. 1985. Bdedpsywdqbefx Ab Iea • Motor power: 7.5 HP • Segmented feed rollers • 4-knife cutterhead • Feed rate: 7–35 mm, infinitely variable If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: excellent (used), Good day! I would like to offer you the following machine: 1 Used Thickness Planer Hofmann D 632 - 63 cm planing width - 27.5 cm planing height - 4-knife Tersa reversible cutterhead - 2 feed speeds, 7 + 14 m/min, selectable via switch - sectional infeed roller (special equipment) - 2 rubber outfeed rollers (special equipment) - thickness table with two height-adjustable table rollers (special equipment) - sectional pressure bar - thickness table adjustment via 2 spindles and 4 guide rails - electric height adjustment for the table, with fine adjustment tip switch - digital display accurate to 0.1 mm - 7.5 kW 380V motor (reinforced version, special option) - 1 m table extension (special equipment) - automatic motor brake - motor protection switch - main switch, lockable, with undervoltage release - emergency stop button - extraction port 150 mm - operating manual, circuit diagram, new grease gun with special grease, wooden wedge for loosening the pressure bar New Parts - Infeed and outfeed lamellas replaced (EUR 50 + 19% VAT) - Tool storage ribbed rubber replaced (EUR 40 + 19% VAT) Bjdpfx Ajywctbob Isda - Hood mat replaced (EUR 80 + 19% VAT) - 4 new Tersa HSS 18% reversible knives (EUR 100 + 19% VAT) - 1 gas strut replaced (EUR 60 + 19% VAT) - 2 main drive V-belts replaced (EUR 50 + 19% VAT) - 4 adjustable rubber machine feet replaced (EUR 100 + 19% VAT) - 2 rubber outfeed rollers are still almost new (74.5 mm – 0.5 mm wear) - Weight: 980 kg - Sale price: EUR 11,000 + 19% VAT The machine has been technically inspected, cleaned, adjusted, and freshly repainted. All cables and plugs are present, ready for immediate use. The machine is in very good condition. Payment by bank transfer before shipping or in cash upon collection. Loading by forklift is no problem. The machine is sold without any warranty or guarantee. Please send me a brief message. Thank you!