Condition: used, Year of construction: 2006, functionality: limited functionality, machine/vehicle number: 106196, planing height: 200 mm, spindle diameter: 90 mm, planing width: 300 mm, spindle speed (max.): 8,000 rpm, height adjustment type: electric, compressed air connection: 8 bar, number of spindles: 5, For sale is a planing line by Weinig, complete with associated mechanisation from Kallfass (before and after the planer). The planing line is currently no longer in daily production. The operator side (left) first spindle and its mounting are defective. Weinig Moulder: Weinig Powermat 2000XL (year 2006) with 5 spindles (Weinig Powerlock system) plus chamfering unit. "Set-up time savings!" Spindle arrangement: bottom, right, left, top, bottom. The bottom and top spindles are both equipped with a jointing device. Spindle motor ratings: bottom 23.5 kW / right 15 kW / left 15 kW / top 28.5 kW / bottom 28.5 kW. Spindle speed: 8,000 rpm. The feed has a 15 kW drive motor, providing feeding speeds from 6 to 60 m/min. Compressed air requirement: nominal pressure 8 bar, operating pressure 6 bar. Workpiece dimensions for processing in the planing line: Shortest part: 2.00 m Longest part: 11.00 m (depending on mechanisation) Minimum thickness: 19 mm Maximum thickness: 200 mm Minimum width: 40 mm Maximum width: 300 mm Maximum profiling depth: 35 mm Feed rate: 6–60 m/min. Dkjdpfxjyzibme Adaek Splitting is possible on the fifth lower spindle up to 60 mm height. Mechanisation: Kallfass "HmoK10000" year 2006 (operational/used) Before and after the planing line there is mechanisation by Kallfass. There is the option to buffer 2–3 packs before the unit, which must then be manually destacked before the infeed. Layer formation after the planer is performed by a paternoster unit with 3 adjustable walls. The maximum component length for this setup is 11.00 m. Price is quoted net ex works, without warranty. Complete disassembly is to be carried out by the buyer. A large inventory of cutterheads, spare parts, and various extraction components is available and can be purchased separately.

Condition: good (used), Year of construction: 2017, In good technical condition. Year of manufacture: 2017. Suitable for dry deburring and disinfection of metal surfaces. Burr removal. Oxide removal on edges and surface finishing. Manufacturer: SCM Group spa Italy. Model: DMC M950. 400V, 71A. Machine weight: 2260 kg. Dkodpsx Ttn Usfx Adaok

Condition: used, SAC RS/530 Thicknesser width mm. 530 Dsdpfx Adeyzfvgjajkk

Condition: good (used), functionality: fully functional, working width: 240 mm, planing height: 160 mm, spindle diameter: 50 mm, planing width: 240 mm, working height: 160 mm, power of feed motor: 4,000 W, spindle speed (max.): 7,000 rpm, spindle speed (min.): 7,000 rpm, height adjustment type: electric, type of input current: three-phase, number of spindles: 5, power: 39 kW (53.03 HP), Equipment: cabin, motor brake, Weinig Unimat 1000 with grooved bed Working width: 240 mm, Working height: 160 mm, 5 spindles Spindle diameter: 50 mm Spindle arrangement: 1-Bottom (7.5 kW) 7000 rpm Dksdpfxsx Dzc Ss Adaok 2-Right (7.5 kW) 7000 rpm 3-Left (7.5 kW) 7000 rpm 4-Top (7.5 kW) 7000 rpm 5-Bottom (5.5 kW) 7000 rpm Feed: 4 kW / 6 – 36 m/min, One powered roller in the table at the outfeed.

Condition: refurbished (used), Year of construction: 1994, working width: 240 mm, planing height: 160 mm, planing width: 240 mm, working height: 160 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, rotational speed (max.): 6,000 rpm, rotational speed (min.): 6,000 rpm, workpiece height (max.): 160 mm, compressed air connection: 6 bar, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, input current: 111 A, We are offering this fully overhauled OTTO MARTIN T 90 planing and profiling machine, year of manufacture 1994. Model: T 90 Serial number: V 215410 Year: 1994 Working width: 240 mm Working height: 160 mm Speed: 6000 rpm Voltage: 400 V Frequency: 50 Hz Dkodeyq D Ifopfx Adaok Number of phases: 3 ~ Rated current: 111 A Operating pressure: 6 bar If you have any questions or require further information, please feel free to send us a message or call us.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Max feeding speed 200 m/min • Electronic speed control 30 - 200 m/min • Max working width 250 mm • Minimum working height 12 mm • Max working height 100 mm • Spindle speed 5000 & 6000 r.p.m • Spindle diameter 50 mm. Dkedpjyzdtksfx Adask For a separate fee, it can be dismantled and loaded onto a transport vehicle.

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Spindle Power: Bottom spindle: 4 kW Right spindle: 7.5 kW Left spindle: 7.5 kW Top spindle: 7.5 kW Bottom spindle: 4 kW Universal spindle: 4 kW Planing width: 220 mm Planing height: 120 mm Max. spindle speed: 6,000 rpm Spindle diameter: 40 mm Feed rate max.: 22 m/min (infinitely variable) Feed motor: 3 kW Main motor: 7.5 kW Pneumatic top pressure Feed via cardan drive Motorized adjustment (planing width and height) Infeed table length: 2,000 mm Dkjdeyybdwepfx Adajk Integrated lubricant pump

Condition: used, Year of construction: 1995, workpiece width (max.): 230 mm, input voltage: 400 V, table length: 1,500 mm, number of spindles: 8, Equipment: cabin, Weinig Unimat 23e Moulding machine (8 spindles) Description; Year of construction 1995 Dodpfx Aoyx Tiiodaskk Dimensions of the infeed table: 1500 mm Number of axes: 8 Spindle Sequence: Bottom-right-left-right-top-bottom-top-bottom Mobile spindle: No Planing width: 20 / 230 mm Planing height: 12 / 120 mm Throughput: 6-24m/min Groove bed: No (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: new, planing width: 335 mm, Easy exchange knife from Kanafusa for the Marunaka Super Surfacer quick changing and adjustment of the blade L=335 mm MANUFACTURER KANEFUSA - FOR MARUNAKA SUPER SURFACER WITH QUICK-CHANGE BLADE SYSTEM Dkodpsym Sc Ajfx Adajk New knives, in a package of 2 pieces

Condition: ready for operation (used), functionality: fully functional, power: 7.35 kW (9.99 HP), 2-speed (Vario) feed gearbox 4-spindle thickness table guide Electric thickness table adjustment Dedpsyzc Efefx Adajkk

Condition: good (used), Year of construction: 1991, Working width 510 mm Working height 200 mm Dkjdpfx Aoyx Iq Isdask Motor output 5,5 kW Length of the planing table 2250 mm Number of knives 4 St. Feed speed 7 / 14 m/min. Dust suction hood 160 mm machine weight ab. 1000 kg

Condition: new, Working width 530 mm Length of the planing table 3.000 mm Number of knives 4-TERSA St. Motor output 4 kW FIMAL surface planer type PF 530 N ----- NEW MACHINE "Partnership Edition" Technical specifications: ----- Planing table dimensions: 3,000 x 530 mm Feed table length: 1,800 mm Dressing fence dimensions: 1,500 x 175 mm Swivel range stop: 0 - 45 ° 4-knife cutterblock system TERSA d = 120mm: 5,000 rpm Max. Chip removal dressing according to CE: 8 mm Motor 50 Hz., 4 kW / 5,5 PS Sound level according to EN 27960: 82.9 - 88.9 dB (A) Basic equipment: Electrics according to CE standards Dksdpoxmk A Hjfx Adajk Magnetic brake Extraction nozzle d = 150mm Bridge protection control panel operated above Original AIGNER aluminum stop with integrated auxiliary stop ----- Special offer from stock: ----- All prices plus VAT / plus Freight and assembly according to expenditure (Technical information according to the manufacturer - without guarantee!)

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, Small tenoning machine with manual feed, Stomana. The machine has undergone a complete overhaul. The electrical system is new. Warranty on the machine. Suitable for standard tenoning as well as micro-dovetail joints. Dksdpeyzb Apjfx Adask

Condition: used, Year of construction: 2001, Min./Max. working width (finished size): 23 - 180 mm Min./Max. working height (finished size): 6 - 105 mm Min. workpiece length: 300 mm Feed speed: 6 - 12 rpm Spindle speed: 6000 rpm Spindle diameter: 35 mm Motor power, horizontal spindle: 10 kW Motor power, vertical spindle: 7.5 kW Feed motor power: 1 kW Diameter of feed rollers: 120 mm Extraction port diameter 1 pc: 150 mm Extraction port diameter 2 pcs: 120 mm Weight: approx. 950 kg Storage location: Supplier Dksdpfeym D Eisx Adask

Year of construction: 2006, condition: used, functionality: fully functional, Planer, jointer FELDER plan51 Specification: • Condition – used, after inspection • Manufacturer – FELDER • Model – plan51 • Working width – 510 mm • Table length – 2250 mm • Adjustable tilting fence • Motor power – 7.35 kW • Spindle speed – 5000 rpm • Chip thickness indicator • Max cutting depth – 8 mm • Noise-reducing combs at the shaft • Motor brake • 4-knife shaft, 120 mm diameter, compatible with Tersa knives • Start/stop 0-1 • Chip extraction outlet – diameter 140 mm • Year of manufacture – 2006 • Overall dimensions: 225 x 105 x 125 cm (L x W x H) Dedpfx Adeyy Sr Soajkk Additional information: • The machine is in perfect technical condition and ready for immediate use • Photos shown reflect the actual condition of the item • Possibility to run and test the machine on site • Free operator training provided at the company headquarters • Listed price does not include VAT or transport costs Financing and transport: • We organize transport via MDD fleet, courier services, or external carriers • Financing options available: lease or lease loan

Condition: excellent (used), functionality: fully functional, Casadei C4 Four-Sided Planer Working width: 220 mm Working height: 120 mm Number of spindles: 4 Spindle configuration: 1. Bottom – 4 kW 2. Right – 4 kW 3. Left – 4 kW 4. Top – 4 kW Spindle speed: 6000 rpm Dodsyxmnljpfx Adajkk Feed speed adjustable via variator: 4–21 m/min Tool size: 125–140 mm Feed driven by cardan shaft Technical documentation

Condition: new, Year of construction: 2026, The CORMAK PT410S planer-thicknesser with a spiral cutterhead is a professional industrial-class woodworking machine that combines the functions of a jointer and a thickness planer in one compact design. Equipped with a modern spiral cutterhead, it ensures maximum machining precision, exceptional surface quality, and quiet operation. It is an excellent choice for woodworking shops, furniture production, and workshops that value efficiency, accuracy, and reliability. Key advantages of the CORMAK PT410S planer-thicknesser Spiral cutterhead – minimizes noise, reduces cutting resistance, and allows for a perfect wood surface finish, even with difficult species. Quick function change – rapid transition from jointer to thickness planer thanks to separately opening tables and dust extraction cover. Stable construction – heavy cast iron frame and tables ensure rigidity and reduce vibrations during operation. Precise adjustment – clear scale and accurate mechanism for setting planing depth and fence angle. High performance – a motor with power up to 4.0 kW (S6 duty) ensures smooth and efficient machining even of wide workpieces. Construction and technology The CORMAK PT410QS model is designed for long-term, intensive use. Its cast iron jointer tables provide excellent flatness and stability of the workpiece, while the centrally mounted thicknesser table ensures even lifting. The tilting aluminum fence with a precise scale allows angle adjustment from 90° to 45° for proper material guidance. Precision and performance Djdpsyy Nl Nsfx Adajkk Thanks to the spiral cutterhead with a diameter of 95 mm and spindle speed of 4300 rpm, the thicknesser ensures an even, smooth surface even when working with hard or resinous wood. The feed is smooth, without vibration or risk of tear-out. Planing height adjustment up to 220 mm allows machining of large elements—both solid wood and glued panels. Applications The CORMAK PT410S jointer-planer is ideal for: woodworking and furniture production shops, craft workshops, stair and wooden component production, processing of solid wood and glued panels. This machine is designed for demanding users who are looking for a precise and reliable planer-thicknesser. Standard equipment: cast iron jointer tables, spiral cutterhead, cutterhead guard, dust extraction outlet, feed switch, emergency stop switch. Optional equipment: transport trolley, knife setting jig, mortising attachment. Technical specifications Jointer table size: 1680 × 410 mm Thicknesser table size: 750 × 410 mm Cutterhead diameter: 95 mm Spindle speed: 4300 rpm Fence tilt angle: 90–45° Dust outlet: 100 mm Max thicknessing height: 220 mm Motor power: 4.0 kW / 400V Max workpiece width: 410 mm Dimensions: 1680 × 1100 × 1100 mm Weight: 360 kg

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Table length: 3000 mm Fence with single-lever operation Cutterblock: 5000 rpm with 4 strip planing knives Control panel with switch and digital display for cutting depth Adjustment for concave and mitre joints, readable on scale Fine adjustment of table height to knife cutting circle Lowerable outfeed table for easier knife replacement Vibration-free machine frame in grey cast iron Special noise-dampened construction Hydraulic foot pedal operation for cutting depth adjustment (fine adjustment possible to 0.1 mm) Max. rebate depth: 20 mm Auxiliary fence integrated in the main fence Planing width: 510 mm Motor: 4 kW With motor brake Adjustable fence: 45 ° Dkodpfx Adsyxh R Ujaek Extraction port: 140 mm Extraction requirement: 25 m³/min Net weight: 900 kg Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 1990, working width: 630 mm working height: 250 mm cutter head: Tersa number of blades: 4 Dodpeyxganjfx Adaskk height adjustment: elektrisch read out workpiece thickness: Mechanisches Zählwerk feed speed: stufenlos ca. 6-18 m/min infeed roller: Stahl outfeed roller: 2 x Stahl table roller: Ja, angetrieben motor power: 5,5 kW suction connection: 160mm machine length: 1200mm machine width: 1200 mm weight: 1100kg

Condition: used, Year of construction: 1993, working width: 630 mm working height: 220 mm cutter head: Tersa number of blades: 4 height adjustment: electric read out workpiece thickness: digital feed speed: 4 / 6 / 12 m/min infeed roller: steel outfeed roller: rubber Dksdpfx Adeyxgahsask table roller: yes motor power: 7,5 kW suction connection: 160mm machine length: 1200mm machine width: 1000 mm weight: 1000kg

Condition: used, Year of construction: 1971, Knife block Z = 2 planer knives, planing width 520 mm Storage location: Nattheim Dedpfx Adev I Eatsajkk

Condition: used, Year of construction: 1988, Planing width: 860 mm, clearance height: 200 mm, minimum clearance height: 3.0 mm, bottom motor: 18.5 kW, top motor: 7.0 / 10.0 kW Dsdpfovvkc Aox Adaokk Storage location: Nattheim

Condition: used, Thickness Planer Panhans 426 Planing width: 630 mm Planing height: 250 mm Electric height adjustment via positioning control TERSA safety cutter block Table guided on four sides Main motor: 7.5 kW Feed speed: 7 + 14 m/min Dkedpeyxdcajfx Adaek Segment pressure beam made of solid aluminium Machine is WORKSHOP-TESTED and in VERY GOOD CONDITION Available from stock Lieboch

Condition: used, Year of construction: 1966, 4-side planer HKM 16 Year of construction: 1966 Hydraulic feed, 6 spindles Planing dimensions: 160x120 mm Transport available at additional cost! Dkjdpfewnrgfsx Adaok

Condition: ready for operation (used), hydraulic workpiece length: 300–3000 mm smooth speed adjustment weight: 130 kg power supply: 380V Dkedpfoyyy Sgjx Adaok year: 2003