Condition: excellent (used), Year of construction: 2005, Working dimensions: 230 × 160 mm Spindle configuration: Bottom – 11 kW – Powerlock Right – 7.5 kW – Powerlock Hedjyr A U Hepfx Ahvefd Left – 11 kW – Powerlock Right – 7.5 kW – Powerlock Left – 7.5 kW – Powerlock Top – 11 kW – Powerlock Bottom – 11 kW – Powerlock Top – 11 kW – Powerlock Bottom – 11 kW – Powerlock Smooth rollers in the table: 3 pcs Spindle speed: 8,000 rpm Pneumatic pressure for feed rollers Vario spindle covers with manual pressure adjustment Cardan shaft feed drive Variable feed speed up to 30 m/min Automatic table lubrication Table manufactured using MarathonCoating technology Control system: PowerCOM on Windows 10 Soundproof cabin Year of manufacture: 2005

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, working width: 230 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 230 mm, working height: 120 mm, power of feed motor: 37,000 W, rotational speed (max.): 6,000 rpm, rotational speed (min.): 3,000 rpm, height adjustment type: electric, type of input current: three-phase, shaft diameter: 50 mm, number of spindles: 10, input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Powermat 2500 10 Spindles, Working width: 230 mm, Working height: 120 mm, Spindle diameter: 50 mm, Feed: 37 kW / 12–120 m/min, Spindle configuration: 1- Bottom (22 kW) – with hydraulic clamping and fully automatic straight jointer 2- Right (11 kW) 3- Left (11 kW) 4- Top (37 kW) – with fully automatic straight jointer 5- Bottom (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 6- Top (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 7- Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 8- Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 9- Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 10- Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm Short infeed table, 1.3 meters (4 rollers), with 2 powered rollers above the table and 2 powered rollers in the table (both table rollers can be lifted). Table height adjustment with electronic digital readout. Incl. 2 heavy-duty side pressure rollers, 140 mm diameter, pneumatically actuated. Hfsdpfjyr Ar Ssx Ahved Base supports, height 320 mm, for a table height of 1190 mm. Marathon POWER Coating for machine table, fences, and guide rails (excluding infeed table and special table surfaces). Special coating to protect table plates, fences, and guide rails from excessive wear. Recommended for processing abrasive materials (e.g., tropical woods, MDF, chipboard, plastics, metals). Automatic lubricant pump for table resin removal. Powered rollers in the machine table, hardened. Heavy-duty steel pressure rollers from above, diameter 120 mm, located in the area of the right and left spindle.

Condition: good (used), Pressure shoe for Weinig planer and moulder Hedpfx Asyryzkshvefd

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2230x720x280 mm Weight 135 kg Hsdpfov A Hxmex Ahvefd Total power requirement 0 kw

Condition: good (used), Working width 630 mm Hfedpjynnk Sjfx Ahved Working height 220 mm Motor output 4 kW Length of the planing table 2100 mm Number of knives 2 St. machine weight ab. 1200 kg

Condition: excellent (used), CATALOG NUMBER 7909 TECHNICAL DATA - Max. workpiece width: 230 mm - Max. workpiece height: 130 mm - 6 spindles: 1) Bottom horizontal, 230 mm, 4 kW 2) Right vertical, 130 mm 3) Left vertical, 130 mm (spindles 2 & 3), 7.5 kW 4) Top horizontal, 230 mm, pneumatically adjustable front/rear, 5.5 kW, electrically adjustable up/down 5) Bottom horizontal, 230 mm, 4 kW 6) Trimming saw, pneumatically adjustable up/down, right/left, 2.2 kW - Saw blade diameter: 160 x 40 mm - All spindles adjustable up/down, right/left - All spindles equipped with electric brake - Spindle diameter: 40 mm - From above: 4 infeed traction rollers, gear-toothed including 2 double rollers - From above: 3 outfeed traction rollers, rubber, smooth, including 1 double roller - From below: rubber traction roller, double - Feed by Cardan shaft rollers - Rollers pneumatically pressed - Infinitely variable feed speed up to 25 m/min - Feed motor: 2.2 kW - Working pressure: 6-10 bar - Electric thickness adjustment - Central table lubrication - Infeed table length: 1980 mm - Extraction port diameter: 5 x 140 mm, 1 x 80 mm - Dimensions (L x W x H): 4000 x 1800 x 1700 mm - Weight approx. 3,500 kg ADVANTAGES – German-made, WEINIG brand – 5-head configuration – Operator’s manual (DTR documentation) – 6th spindle is a pneumatically adjustable trimming saw – Planer in ideal, very good condition Hfedpfx Aheynktcsvjd Net price: 53,900 PLN Net price: 12,840 EUR Net price calculated at 4.2 PLN/EUR exchange rate (Price may change in case of significant exchange rate fluctuations)

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 02-84-022, power: 37 kW (50.31 HP), 4-SIDE PLANER/MOULDER, 4 CUTTERHEADS + UNIVERSAL SPINDLE, 2.5M TABLE & HEAVY-DUTY MOTORS Brand: CASADEI Model: MATRIX 4+1 Serial No.: 02-84-022 Year: 2002 WORKING CAPACITY (thickness x width): 6 to 155 x 25 to 230 mm - 4-sided planer and moulder - Working width: 25 to 230 mm - Working height (timber thickness): 6 to 155 mm - Max. finished timber section: 155 x 230 mm - Min. working length: 480 mm - Adjustable cutting depth: max 10 mm - Spindle rotation speed: 6,000 rpm PLANER/MOULDER CONFIGURATION: - Sturdy welded steel frame - Soundproof panoramic hood with gas struts - Raised operator control panel - 2,500 x 250 mm steel infeed table Floor height: 880 mm Side-entry spring-loaded feed roller Manual table lubrication unit after surfacing 1) Bottom horizontal spindle 5.5 kW TERSA cutterhead Ø125 x h.240 mm 1 retractable vertical roller presser 2 & 3) Right then left vertical spindles, 1 x 7.5 kW each TERSA cutterheads Ø125 x h.165 mm 4) Top horizontal spindle 7.5 kW TERSA cutterhead Ø125 x h.240 mm Adjustable exit pressure pad 5) Universal spindle 7.5 kW Ø 40 x 255 mm 1 retractable horizontal roller presser FEED SYSTEM: - Variable feed speed: 5 to 25 m/min Feed motor: 1.1 kW (1.5 HP) - 8 independent pneumatic feed rollers: 2+2 grooved steel, then 2+2 rubber-coated OTHER SPECIFICATIONS: - CE marking - Power supply: 380V, 3-phase, 50 Hz - Lockable main switch, automatic star-delta starters Emergency stops front/rear - Installed power: 37 kW (50 HP), IN 62A - Braked motors - Cardan shaft spindle drives - Digital readouts (Siko-type counters) for precise manual adjustment of each operation - Electric raise/lower beam for thickness adjustment, Raise/lower motor: 0.37 kW - Axial spindle adjustment: Bottom horizontal: 0 to 15 mm Top horizontal: 0 to 25 mm Verticals: 0 to 25 mm - Acceptable cutter/tool dimensions: On bottom horizontal spindle: Ø 120 to 140 mm Profiling on vertical spindles: Ø 100 to 180 mm Profiling on top horizontal spindle: Ø 100 to 180 mm End milling cutter: Ø140 x 12 x 40 mm - Recommended pneumatic supply: 7 bar Working pressure: 6 bar Average consumption: 0.85 Nl/cycle Connector: 1/2" G - Dust extraction, central upper port: Ø250 mm Required air speed: min. 25 m/sec Airflow: 4,500 m³/h - Technical manual included. - Machine fitted with 4 TERSA shafts Footprint: 4,700 x 1,700 x h.1,800 mm Weight: 2,240 kg Please contact us for supply of consumables, accessories, and/or extraction systems. Hjdpsu Sr Ivefx Ahvefd

Condition: used, Year of construction: 1979, Working width 510 mm Length of the planing table 2700 mm Number of knives 2 St. Hfodpfx Ahjvxa Igjved Dimensions (L/W/H) 2700x1100x1000 mm weight of the machine ca. 1000 kg

Condition: good (used), Weinig Hydromat H23 8 spindle 50mm spindles 6,000 RPM Bottom 7.5kW jointer ready Right 7.5kW straight jointer ready Left 15kW straight and profile jointer ready Right 11kW profile jointer ready Hfedjyrrh Nepfx Ahvsd Top 15kW jointer ready Bottom 18.5kw jointer ready Top 11kw straight and profile jointer ready + outboard bearing Bottom 7.5 kw straight and profile jointer ready + outboard bearing 7.5kW feed motor. Automatic lubrication system. Full heavy duty sound enclosure Possible to supply with moulder infeed and outfeed as needed. Possible to offer tooling if needed.

Condition: reconditioned (used), Year of construction: 2013, Leadermac Speedmac 631 Working width: 310 mm, height: 150 mm. Spindles: 6 x 50mm (4x spindles with inverter speed control Bottom (22 kW) - 6000 rpm outboard bearing Right (15 kW) - (4000 to 9000 rpm) straight jointer Left (15 kW) - (4000 to 9000 rpm) straight jointer Top (22 kW) - 6000 rpm, outboard bearing, Top (22 kW) - (4000 to 9000 rpm), outboard bearing, straight jointer Bottom (22 kW)- (4000 to 9000 rpm), outboard bearing, straight jointer Electronic spindle position adjustment as follows 1. 3rd spindle width adjustment. 2. 4th spindle thickness adjustment. 3. 5th spindle thickness adjustment. Feed speed 60m/min (Possible to increase). Top feed rollers 200mm (first 2) and 140mm others Connection: 380 V / / 50 Hz Hodpfx Aheyrrhpevofd Full Documentation included.

Condition: excellent (used), Year of construction: 2015, Weinig Powermat 2400 moulder with 7 Spindles. (Year 2015) 50mm spindles 6,000 RPM (Not Powerlock) Hodpfx Aoyrrhcjhvofd Bottom 15 kW + outboard bearing Right 11 kW + Straight jointer Left 11 kW + Straight jointer Top 15 kW + Straight jointer + outboard bearing Bottom 18.5 kW + Profile jointer Top 18.5 kW + Straight + Profile jointer Bottom 18.5 kW Straight jointer + outboard bearing 11kW feed motor Automatic lubrication system. Electric digital display memory system. Possible to supply with Weinig moulder infeed and outfeed

Condition: excellent (used), Year of construction: 2012, Weinig H1000 moulder Weinig Hydromat 1000 with 5 Spindles. (Year 2012) Separate electrical panel Separate remote control panel Automatic lubrication system for bedplates Memory system Full sound enclosure Hfsdpfoyrrc Hjx Ahvjd No 1. 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer No 2. 7.5kw - Right 6000rpm + profile jointer No 3. 7.5kw - Left 6000rpm + profile jointer No 4 . 7.5kw - Top 6000rpm + Outboard bearing + Straight jointer No 5 . 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer 50mm spindles Beam 0.55kW Full documentation included. Extraction manifold included. Possible to supply with Weinig mechanisation if needed (Year 2012)

Condition: excellent (used), Year of construction: 2003, Weinig Hydromat 23C with 6 Spindles. Separate electrical panel. Automatic lubrication system for bedplates Maximum dimensions 140mm x 230mm No 1.  11kw - Bottom 6000rpm + Outboard bearing - straight jointer prepared No 2. 11kw - Right 6000rpm - straight and profile jointer prepared No 3. 11kw - Left 6000rpm - straight and profile jointer prepared No 4 . 15kw - Top 6000rpm + Outboard bearing - jointer prepared No 5 . 11kw - Top 6000rpm + Outboard bearing - straight jointer No 6 . 18.5kw - Bottom 6000rpm + Outboard bearing - straight jointer 7.5 kw feed. 6-60m/min (Possible to increase speed as needed). 50mm spindles Beam 0.55kW Full documentation included. Possible to supply with hydro tooling if needed. Hfodpfx Ahjyrrcmjved Possible to supply with infeed and outfeed if needed.

Condition: excellent (used), Weinig Hydromat 23C with 6 Spindles. Max width 245mm Max Thickness 160mm Separate electrical panel. Hedpfx Aheyrrb Aovsfd Separate remote control panel Automatic lubrication system for bedplates Full heavy duty sound enclosure. 15kW feed motor 100m/min No 1.  7.5kw - Bottom 6000rpm straight jointer prepared No 2. 11kw - Right 6000rpm straight and profile jointer prepared No 3. 15kw - Left 6000rpm straight and profile jointer prepared No 4 . 15kw - Top 6000rpm + Outboard bearing + straight and profile jointer prepared No 5 . 30kw - Top 6000rpm + Outboard bearing + straight and profile jointer prepared No 6 . 15kw - Bottom 6000rpm + Outboard bearing + straight and profile jointer prepared 50mm spindles Beam 0.55kW Full documentation included. Heavy duty sound enclosure. Possible to supply with hydro tooling if needed. Possible to supply with full mechanisation if needed.

Condition: excellent (used), Year of construction: 2012, Weinig H1000 moulder with E3 infeed and A3 outfeed Weinig Hydromat 1000 with 5 Spindles. (Year 2012) Separate electrical panel Separate remote control panel Automatic lubrication system for bedplates Memory system Full sound enclosure Weinig E3 moulder infeed +pack scissors lift (3000kg). Weinig A3 drop leaf outfeed + pack scissors lift (3000kg) + pack outfeed chain conveyor. No 1. 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer No 2. 7.5kw - Right 6000rpm + profile jointer No 3. 7.5kw - Left 6000rpm + profile jointer No 4 . 7.5kw - Top 6000rpm + Outboard bearing + Straight jointer No 5 . 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer 50mm spindles Beam 0.55kW Hfsdpfx Asyrrbpehvjd Full documentation included. Extraction manifold included.

Condition: good (used), WEINIG UNIMAT 23EL 9 SPINDLE SHORT INFEED TABLE 1: BOTTOM 7,5KW 2: RIGHT 11 KW 3: LEFT 7,5 KW 4: RIGHT 7.5 KW Hfedpfx Aoyrra Eohvjd 5: TOP 11 KW 6: BOTTOM 7,5 KW 7: TOP 11 KW 8: BOTTOM 11 KW 9: UNIVERSAL 7,5 KW 360° TILTABLE 8000 RPM SPINDLES. FEED MOTOR 7.5 KW MAX FEED SPEED 44M/MIN 13 x DRIVEN TOP FEED ROLLERS 6 x DRIVEN BED FEED ROLLERS AUTOM. BED LUBRICATION PNEUM. POWERED SIDE PRESSURE ROLLERS PNEUM. POWERED HOLD DOWN ON 6+8 DIMENSION: APPR 5000 X 2000 X 1800 MM WEIGHT: APPR. 6500 KGS DUSTHOODS: 9 x 140 MM DIAMETER EXTRACTION MANIFOLD INCLUDED FULL DOCUMENTATION INCLUDED

Condition: new, planing width: 335 mm, Replaceable knives for planer – Manufacturer: Kanefusa, for Marunaka planer with reversible knife system, length 335 mm, set of 2 pieces. Hodjym Sc Aspfx Ahvsfd

Condition: used, Year of construction: 1993, machine/vehicle number: 315 AE 0643 V 02 85, ACMA DM82 – Single-Blade Rip Saw (Délingeuse monolame) The ACMA DM82 is a robust French single-blade rip saw for professional longitudinal splitting of boards and strips in sawmills and woodworking shops. Featuring hydraulic feed and INRS safety approval (Visa No. 315 AE 0643 V 02 85) from 1993, it is ideal for precise wood cutting up to 160 mm height. Cutting length: 4000–5200 mm Cutting height: 140–160 mm Cutting width: 370–600 mm Saw blade Ø max.: 600 mm (min. 450 mm) Hodpfx Ahoyrnxkevofd Saw motor power: 9–13.2 kW (12–18 HP), 380 V 3~ RPM: 3000 rpm Hydraulic motor: 2.2 kW Table height approx.: 820 mm Dimensions (L×W×H): 4800–6600 × 1500–2300 × 800–1500 mm Weight: approx. 1350 kg

Condition: excellent (used), functionality: fully functional, Weinig Powermat 500 four-sided planer Working width 230mm Working height 160mm Number of spindles 6 Spindle arrangement: Bottom 5.5kw 8000r.p.m Right 5.5kw 8000r.p.m Left 7.5kw 8000r.p.m Top 7.5kw 8000r.p.m Bottom 7.5kw 8000r.p.m Universal 5.5kw 8000r.p.m Spindle #6 equipped with power lock system Feed speed adjustable by inverter up to 30m/min Hfjdpfx Ahjvfr Rgoved Pulling rollers in the worktop (1 grooved roller for wet wood) Electro-motorized positioning of height and working width Pneumatic material stops Drive on karda shafts Total power 41kw Year of production 2005 CE certificate

Condition: new, Saw shaft and saw bush Tool shaft and clamping bush Hjdsnladhopfx Ahvefd

Condition: used, Year of construction: 2001, Min./Max. working width (finished size): 23 - 180 mm Min./Max. working height (finished size): 6 - 105 mm Min. workpiece length: 300 mm Feed speed: 6 - 12 rpm Spindle speed: 6000 rpm Spindle diameter: 35 mm Motor power, horizontal spindle: 10 kW Motor power, vertical spindle: 7.5 kW Feed motor power: 1 kW Diameter of feed rollers: 120 mm Extraction port diameter 1 pc: 150 mm Extraction port diameter 2 pcs: 120 mm Weight: approx. 950 kg Storage location: Supplier Hsdpfx Aeym D Eijhvofd

Condition: good (used), Year of construction: 1999, Four side planer Leadermac Compact 423 S - machine in stock - after the technical review - year of production 1999 - chrome tops - electronic height adjustment TECHNICAL PARAMETERS: - planing width 230 mm - planing height 130 mm - electric adjustment of the left head - electric adjustment of the upper head - electronic height adjustment - five top steel rollers - one upper rubber roller - diameter of the spindles 40 mm 1 lower spindle 5.5 kW diameter 2 right spindle 3 left spindle 7.5 kW 4 upper spindle 7.5 kW - tool diameters 160 and 180 mm - pneumatic clamps - feed on cardan shafts Hfsdsgufi Sspfx Ahved - smoothly adjustable feed 6-20 m / min - 2.2 kW feed motor power - chrome tops - length of the preliminary table top 1980 mm - diameter of nozzles 4x 130 mm Machine dimensions: - length 340 cm - width 190 cm - height 200 cm - weight 2200 kg

Condition: excellent (used), SICAR Forte 400 thicknesser Working width 400mm Planing height 300mm Shaft with conventional knives Shaft with 4 knives Shaft speed 5200r.p.m Electric lifting and lowering of the work surface Hsdpot Rp Hxefx Ahvefd Main motor 3kw 3 feed speeds CE certificate

Condition: excellent (used), Weinig H30N four-sided planer Working width 300mm Working height 200mm Number of spindles 5 Spindle arrangement: Hjdpfx Ajumtlqohvefd Bottom 11kw Right 11kw Left 11kw possibility to change spindle angle up to 90° Right 7.5kw ability to change spindle angle up to 45° Top 11kw Feed speed adjustable with variator up to 22m/min Feed motor 9kw Drive in work table: - 3 rows of grooved drawing rollers in front of the first head - 5 rows of smooth pulling rollers Top drive: - 9 rows of pulling rollers Weight of the machine 6100kg Machine dimensions 470x190x160cmH

Condition: excellent (used), Weinig H30N four-sided planer Working width 300mm Working height 200mm Number of spindles 5 Spindle arrangement: Bottom 11kw Hfsdpoumtlkjfx Ahvjd Right 11kw Left 11kw possibility to change spindle angle up to 90° Right 7.5kw ability to change spindle angle up to 45° Top 11kw Feed speed adjustable with variator up to 22m/min Feed motor 9kw Drive in work table: - 3 rows of grooved drawing rollers in front of the first head - 5 rows of smooth pulling rollers Top drive: - 9 rows of pulling rollers Weight of the machine 6100kg Machine dimensions 470x190x160cmH