Formier

WEINIG Powermat 500

Condition: used, Weinig Powermat 500 planer and moulder for four-sided planing and profiling of wood with CNC control and Powerlock quick-change system. spindle: 7 spindle 1: Bottom / 7.5 kW / 8,000 rpm spindle 2: Right / 7.5 kW / 8,000 rpm spindle 3: Left / 7.5 kW / 8,000 rpm spindle 4: Right / 7.5 kW / 8,000 rpm spindle 5: Top / 7.5 kW / 8,000 rpm spindle 6: Top / 7.5 kW / 8,000 rpm spindle 7: Bottom / 7.5 kW / 8,000 rpm working width: 230 mm working height: 120 mm feed: 30 m/min / 4 kW Planer table length: 2.500 mm Gsdpoxzdwysfx Ag Djkf Air cushion table: Yes Control: PowerCom Plus

Condition: new, Year of construction: 2024, Cutting capacity: 55x360, 80x340, 95x325, 125x295, 135x280 mm Minimum work piece thickness mm.10 Working table tilted 8° Cutting unit technical features: Pneumatic upstroke saw TR500 Motor power 10 HP (7,5 kW), Volt 400/50 Hz. TCT Blade dia.500 mm., F=30 Z=144 S=4,6 Cutting cycle speed: 4 seconds Push feed system technical features: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feeding by rack and pinion system and brushless motor Positioning precision +/- 0,4 mm Strong infeed motor for a packet weight of 80 kgs Maximum push feed system speed 90 m/min Pneumatic rising of the pusher at the end of the cutting cycle and overhead returning. Data entry management: 12 inch TOUCH-SCREEN Controller (800x600 pixel) USB Port Ethernet Port LINUX Operating system Loading and save machine parameters via USB Port Cutting cycle (pattern) editing and entered directly on the controller Transfer of cutting lists created by PC via USB or Ethernet Port Working software: Manual input of loading board length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (Maximum length, Sequence and Board sequence) N°1000 cutting lists made up of 11 sizes or one list of 10000 sizes in sequence Package "OPTI": automatic board length detection and full optimization. Piece length reading by photocell Cutting cycle: with 6 optimizing criteria: (Longest length, Sequence, Board sequence, Volume, Minimum waste and Priority length) Package "OPTI PLUS": total optimization with knots and defects removal (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: Gkjdpehw Ng Ijfx Ag Def Package "OPTI PLUS": for knots and defects removal Photocell for reading wood mapping knots and defects Marking with fluorescent chalks/crayon (Note Ð Can only be ordered in combination with ZA250) Pneumatic side clamp device

Year of construction: 2008, condition: like new (used), Four-side planer Weinig Powermat 500 - year of production 2008 Gkedeltla Sepfx Ag Dof - German production - PowerCom control - saving profiles with tools and positions - PowerLock tool holder TECHNICAL PARAMETERS: planing width 300 mm planing height 200 mm PowerLock tool attachment PowerCom control with positioning of the upper and left spindles 1 spindle 11kW 2 spindle 11 kW 3 spindle 11 kW 4 spindle 15 kW 5 spindle 15 kW milling spindle 1.5 kW 12000 rpm spindle speed 8000 rpm feed continuously adjustable 6-36 m/min feed motor power 4kW five upper steel pulling rollers one rubber upper pulling roller one roller in the top pulling air cushion in the table automatic central table lubrication automatic lubrication of spindle guides length of the feeding table 1970 mm spigot diameter 2x140 mm 3x160 mm 1x80 mm total power 70 kW 140 A Machine dimensions 500x225x242 cm weight 3000 kg

Condition: excellent (used), Year of construction: 2005, working width 230mm Gsdpfx Ajw Afazeg Dokf working height 120mm 6 spindles spindles set: bottom/right/left/top/top/bottom second top spindle with Powerlock toothened roll in the infeed table spindles diameter 40mm spindles speed 8000 RPM Power Com controller variable regulated feeder 5-30m/min

Condition: not inspected (used), Year of construction: 1984, 1 milling unit 2.8/3.5 kW nominal current 6,4/9,3 A Gjdpjga Tu Dofx Ag Dekf workpiece thickness max. 130 mm Lateral table for routing work

Condition: ready for operation (used), Technical characteristics Capacity : 260 x 160 mm Feed rate : 5-30m/min Axial radial and beam adjustment by numerical control Control panel Modem connection 5 POWERLOCK shafts Lower planer 15 HP Right spindle moulder 10 HP Left spindle moulder 10 HP Upper planer 15 HP Lower planer 10 HP Power and Motors Gjdpfx Agot Rrc Ns Dokf Voltage: 400 V Pluging: Three-phased Power: 50 Kw Overall dimensions

Condition: excellent (used), Planer 9 heads Working width - 20 cm Working height - 22 cm Gkedpfjtrdwtex Ag Def 5 pulleys in the table Heads 1 bottom 7.5 kW 2 right 11 kW 3 left 11 kW 4 right 11 kW 5 up to 11 kW 6 down 11 kW 7 up to 11 kW 8 down 11 kW 9 universal 11 kW PERFECT CONDITION!

Condition: good (used), Year of construction: 1994, 2 side planer top - bottom constant table ( always same infeed height ) max. planing width 600 mm max. planing height 280 mm Gkjdohuthyopfx Ag Dof planing shafts with strip knives immediately ready for use

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, overall weight: 9,040 kg, The compact screening plant is equipped with a powerful 2-deck screen box. The hydraulically folding conveyor belts and the unique compact design make it possible to it, Gkedpfx Ajum I Hpeg Dsf that the screen can be folded up and transported very easily. The aggressive screen box can process up to 180 tons / hour and can be used for a wide range of applications. of applications including recycling, demolition, crushed stone, sand and gravel, soil and compost. compost. The simple drive unit and hydraulics result in easy maintenance, operation and maintenance. Technical description: * Deutz engine * Dimensions feed hopper: 2200 x 1200 mm * Dimensions upper screening deck: 2865 x 1200 mm * Dimensions lower screen deck: 2430 x 1200 mm * Key start * Simple hydraulics * Conveyor belts for fine and medium-fine products * Discharge conveyor for oversized products * Webtec for controlling the belt speed * Screen mesh - 1 set of desired screen mesh / several combinations available * Weight: 9,040 kg * Transport dimensions: 8000 x 2200 x 2700 mm (lxwxh) * 1 year warranty from start of operation

Condition: excellent (used), Weinig Unimat 500 four-sided planer Working width 230mm Working height 140mm Number of spindles 6 Spindle arrangement: 1.Bottom 7.5kw 2.Right 7.5kw 3.Left 7.5kw 4.Top 11kw 5.Top 11kw 6.Bottom 7.kw Total power 56kw Feed speed adjustable on inverter Memory system Pneumatic pressure divided into 3 sections 4 rows of metal material feed rollers 2 rows of rubber drawing rollers 1 roller in the tabletop driven by a cardan shaft Gedpfx Agsthk T Io Dskf Length of input table top 1980mm Worktops made with Marathon Coating technology CE certificate Extraction stubs 6x140mm Machine dimensions 394x185x195cmH