Condition: good (used), Year of construction: 1978, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, spindle diameter: 30 mm, For sale is a robust Hofmann table milling machine, built in 1978, in a heavy-duty industrial design. The machine is equipped with a Holz-Her 3-roller feed unit ETZ and is suitable for a variety of milling operations in carpentry workshops, joineries, and in the furniture and interior design industries. The height adjustment of the milling spindle is conveniently done via a handwheel. The milling jaws can be adjusted manually. Three different spindle speeds allow for adaptation to various milling operations. In addition, the machine is equipped with 3 Aigner rails. Technical data Manufacturer: Hofmann Year of construction: 1978 Milling spindle diameter: 30 mm Spindle speeds: 6,000 / 8,000 / 10,000 rpm Height adjustment: by means of a handwheel Milling jaw adjustment: manual Dust extraction connections: Ø 120 / 140 mm Machine size: approx. 2,700 x 1,100 mm Heavy-duty table and machine construction made of cast iron Equipment Holz-Her 3-roller feed unit ETZ 3 feed rollers Height-adjustable feed unit Manual milling fence 3 Aigner rails Milling spindle Ø 30 mm 3 spindle speeds Handwheel for height adjustment Dust extraction connections Cjdpozvdk Asfx Aiijri Accessories as shown in the photos Scope of supply Hofmann table milling machine Holz-Her 3-roller feed unit ETZ 3 Aigner rails Accessories as shown in the photos The machine can be inspected and tested under power by appointment. Transport possible for an extra charge! The machine is subject to differential taxation according to § 25a UStG. The machine will be inspected before sale. For used machines with a year of construction of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: good (used), Year of construction: 1977, functionality: fully functional, power: 5.7 kW (7.75 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, spindle diameter: 30 mm, actuation type: manual, rotational speed (max.): 10,000 rpm, rotational speed (min.): 3,000 rpm, table width: 800 mm, table length: 1,200 mm, overall weight: 700 kg, Table milling machine, type F 50 - Year of manufacture: 1977 Crodpfxo Ah Tcuo Aiioi - 3,400, 5,000, 6,000, 8,000, 10,000 rpm - Clockwise/counterclockwise rotation - Milling spindle: 30 mm - Clamping length: 140 mm - Wood fence with fine adjustment, rotatable - Table size: 1200 x 800 mm - Weight: 700 kg - with Holz Her 3-roller feed unit - Good condition - Machine has been inspected - Subject to differential tax

Condition: good (used), Year of construction: 1966, functionality: fully functional, Milling fence with fine adjustment Sliding table Crsdpfx Aox U Dfgoiiji Crosscut saw Aigner table extension with Holz-Her ETZ feed unit, 8 speeds 380 Volt Shipping possible at extra cost!

Condition: excellent (used), Year of construction: 1998, Chain motor 2,2 kw Lock plate motor 0,5 kw Boring motor 0,5 kw weight of the machine ca. ca. 192 kg Credpfo Ah Idwex Aiioi

Condition: excellent (used), CATALOG NUMBER 8143 Technical data: Circular saw: - max. saw blade diameter 300mm - adjustable blade, front/rear - motor approx. 3.4kW - dust extraction port diameter 70mm Router: - spindle: - spindle diameter 40mm - spindle working height 180mm - locked spindle - motor 11kW - 2 types of rotational speeds 4000, 6000 rpm - electric saw brake - pneumatic material clamping on the carriage, 2 pcs from above and 2 pcs from the side - side carriage adjustable up/down, front/rear and at an angle - retractable support from the table - angle ruler - electric carriage feed - dust extraction port diameter 190mm - dimensions length/width/height 2950mm x 1700x 1630mm – weight 920kg ADVANTAGES - Polish production - electric carriage feed - upper control panel - used router, very good condition Net price: 17,900 PLN Net price: 4,163 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations) Credpfx Aio Ah E Nksiei

Condition: used, total length: 1,000 mm, total width: 2,040 mm, total height: 1,710 mm, Year of manufacture: 1999 Colour: Grey Empty weight: 900 kg - Year: 1999 - CE marking present: Yes - Serial number: 126-02049 - Main motor power [kW]: 7.8 - Spindle diameter [mm]: 40 - Table length [mm]: 1990 - Table width [mm]: 850 - Max. tool diameter milling head [mm]: 180 - Feeding device present: Yes - Brand: Holz-her - Type: ET117 - Number of wheels [pcs]: 3 - Number of speeds: 8 - Tools (milling heads) included: Yes - Spindle speed: Manual - Min. spindle speed [rpm]: 3000 - Max. spindle speed [rpm]: 10000 - Spindle speed control: Variable - Voltage [V]: 380 - Current consumption [A]: 12 - Fuse [A]: 16 - Power [kW]: 6.2 - Transport dimensions: 1000mm x 2040mm x 1710mm (l x w x h) Cjdpj Afy S Hsfx Aiijri - Transport weight [kg]: 900kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2020, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, spindle diameter: 30 mm, pivoting range: 45 °, actuation type: electric, table width: 780 mm, table length: 2,500 mm, overall weight: 660 kg, 5.5 kW, -45/+45° tiltable, electric height and swivel adjustment, left/right, 6 speeds, Aigner stop, 2 x 500 mm, digital display on the fence, table 2500 mm x 780 mm, mechanically programmable fence with two displays, system for quick removal from the work table, including Felder 3-roller feed system. New price: €18,700.00 Cedpeykar Hsfx Aiisri Available approximately September 2026. Shipping possible for an additional charge!

Condition: good (used), Year of construction: 1998, functionality: fully functional, Robust and high-quality table milling machine from the manufacturer Hofmann. The machine was manufactured in 1998 and is suitable for a wide range of milling operations in carpentry and woodworking. Technical data: - Manufacturer: Hofmann - Type: TF 1200 - Year of manufacture: 1998 - Machine number: 126-01986 - Motor power: 5.0 / 6.2 kW - Three-phase connection: 400 V, 50 Hz - Current consumption: 10 / 13 A - Milling spindle: Ø 30 mm Codpfxj Agm T Hs Aiieri - Spindle speeds: 3,000 / 4,000 / 5,000 / 6,000 / 8,000 / 10,000 rpm - Spindle: not swiveling - Height adjustment: manual via handwheel - Dust extraction connections: typically 2 × Ø 120 mm Feed system – additional cost of €500 net. Inspection and test run possible by arrangement. Loading and shipping can be arranged.

Condition: excellent (used), CATALOG NUMBER 8142 Technical specifications: Circular saw: - max. saw blade diameter 300mm - blade adjustable front/back - motor approx. 3.4kW - dust extraction nozzle diameter 70mm Milling machine: - spindle: - spindle diameter 40mm - spindle working height 180mm - spindle locking mechanism - motor 11kW - 2 types of rotational speeds 4000, 6000 rpm - electric saw brake - pneumatic material clamping system, top 1 unit and side 2 units - side table adjustable up/down, front/back and at an angle - table feed adjustable on an inverter - angle ruler - dust extraction nozzle diameter 190mm - dimensions L/W/H 2950mm x 1700mm x 1630mm - weight 920kg Crodpfo Ah Elksx Aiisi ADVANTAGES - Polish production - electric table feed adjustable on an inverter - upper control panel - used mortising machine, very good condition Net price: 18900 PLN Net price: 4395 EUR depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: good (used), Year of construction: 1990, functionality: fully functional, Table spindle moulder TS110 Year of manufacture: 1990 380 Volt, 7.5 HP Milling fence with fine adjustment 4 spindle speeds: 3,000, 4,500, 8,000 and 10,000 rpm Reversible left/right rotation, brake Haffner 3-roller power feed, 4 feed speeds, Feed rollers new, Good condition – machine has been inspected Csdpfx Aiov Im Swsiori Transport possible at extra cost! Due to the age of the used machine, warranty is excluded for commercial buyers.

Condition: excellent (used), Year of construction: 1994, Edge router Crodpfx Ao Ahm Dijiiji In very good condition.

Condition: used, Zimmermann Wall-Mounted Milling Machine with Work Table and Tooling Wall-mounted cantilever milling machine for model and template making, woodworking, and machining model-making plastics. Suitable for pattern-making workshops and individual milling tasks. The milling head is positioned above the work table and adjusted manually. Material suitability depends on the cutting tool installed. Included: – Milling head with electric motor and control buttons – Adjustable cantilever arm with wall mounting – Work table with drawers – Milling cutters, collet chucks, spanners, and accessories shown in the photographs Manufacturer: Zimmermann Condition: used, dismantled Quantity: 1 complete set Stock reference: Y211 The machine is sold dismantled. The first photograph shows the original installation before dismantling; the remaining photographs show the current components and tooling supplied. Installation and electrical connection are the buyer’s responsibility. Price for the complete set: EUR 590 net, excluding VAT. Reasonable offers will be considered. Cjdpfxj Ah Ihpo Aiijri Available from stock in Latvia. Inspection and collection are possible on weekdays from 07:00 to 16:00 at: “Salas mala”, Gātciems, Salas parish, Mārupes municipality, LV-2105, Latvia. Loading assistance is available.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 200064, type of input current: three-phase, overall weight: 312 kg, input voltage: 380 V, We offer this used OMEC 750 CN Dovetailer, year of construction 2020. Cedo Afn A Sspfx Aiijri If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2010, Panhans PF45 swivel spindle milling machine in good, fully functional condition. The machine has only been used very rarely and has hardly any operating hours. Probably less than 100 operating hours. Therefore, it is slightly dusty. Year of manufacture: 2010 Swivel range: -5° to +45° Spindle diameter: 30 mm Vertical adjustment: 170 mm Spindle speeds: 3000 / 4000 / 6000 / 8000 / 10000 rpm Motor power: 5.5 kW Table size: 1,300 x 850 mm Weight: approx. 530 kg Right and left rotation of the milling spindle Codsz Dp Erjpfx Aiiori Optionally, a matching dust extraction system from Höcker Polytechnik / Nestro can also be purchased (see last picture). The machine can, of course, be inspected and thoroughly tested while powered on. The sale is to commercial businesses with exclusion of liability for material defects. No guarantee, warranty, or right of return.

Condition: used, Year of construction: 2021, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 8 A, input frequency: 50 Hz, actuation type: manual, Felder table router F 500 M, acquired on March 25, 2021, for profiling, rabbeting, grooving, and edge processing of wood pieces. A classic stationary router for professional woodworking shops. Key technical data: Csdsztxt Hjpfx Aiijri - Machine type: Table router / Spindle router - Model: Felder F 500 M - Spindle diameter: Ø 30 mm - Usable spindle height: approx. 100 mm above the table - Table opening: approx. 180 mm - Spindle speeds: 3000 / 6000 / 8000 / 10,000 rpm - Max. tool diameter at the router fence: approx. 220 mm - Motor power: 4.0 kW - Working height: approx. 916 mm - Weight: approx. 300–320 kg depending on the version - Dust extraction port: approx. 120 mm at the router fence No warranty.

Condition: ready for operation (used), Year of construction: 1998, machine/vehicle number: 79-12/075-98, functionality: fully functional, input voltage: 380 V, input current: 86 A, input frequency: 50 Hz, type of input current: three-phase, spindle diameter: 30 mm, pivoting range: 45 °, rip fence adjustment: manual, actuation type: electric, table length: 2,000 mm, total length: 2,220 mm, total width: 710 mm, total height: 1,220 mm, overall weight: 450 kg, Equipment: documentation/manual, Everything on the machine is in perfect working order. The sliding table has a length of 1920 mm. It was manufactured without brakes. It is in the condition shown in the pictures and is available for testing on a pallet. Crsdsz N S Izepfx Aiiji

Condition: like new (used), Year of construction: 1999, machine/vehicle number: P9970, functionality: fully functional, operating hours: 8,000 h, input voltage: 400 V, type of input current: three-phase, pivoting range: 360 °, rip fence adjustment: CNC-controlled, rotational speed (max.): 18,000 rpm, rotational speed (min.): 12,000 rpm, year of last overhaul: 2024, Equipment: CE marking, documentation/manual, ANDREONI PROGRESS 20 – Automatic, robotic engraving pantograph Year: 1999 CNC controlled! 20 workstations, 200 mm cutter spacing, pneumatic workpiece clamping. High-power spindles, 1.1 kW. The machine is in excellent condition due to moderate use. Crjdpfjzltxuex Aiisi The manufacturer is still in operation and is located in Milan (Italy). Numerous tools included. Conveyor belt for chip removal.

Condition: good (used), Year of construction: 1966, Spindle moulder type 54F, year 1966, V-belt drive, reversible (left/right rotation), 4 spindle speeds, 30 mm spindle, 3 kW, transport dimensions 940 x 780 x 1200 mm, weight 480 kg. Transport available at extra cost! Cedpfoy E Nuhex Aiijri

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed Crsdpfxozt Ai Ee Aiioi very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation

Condition: like new (used), Year of construction: 2021, operating hours: 1 h, functionality: fully functional, We are selling a plate gripper that we only used once, but it did not meet our requirements. The device is in new condition. Crjdpfx Aij Agu Swoisi

Condition: used, Year of construction: 1993, 1993 Balestrini PICO Spindle Press with single acting, 1 head and 2 benches, CE marked Cjdpfe Ahy I Ssx Aiijri

Condition: like new (used), Year of construction: 2025, functionality: fully functional, type of input current: AC, space requirement width: 762 mm, space requirement length: 1,468 mm, space requirement height: 1,278 mm, overall weight: 300 kg, warranty duration: 6 months, Equipment: CE marking, Two coordinated CNC milling machines / special machines for the fully automated series production of consumables. The product is repeatedly requested in large quantities in international online and retail trade; worldwide, there are only a few manufacturers that produce this product. THE MACHINES – KFM25: produces the blank from the solid material – PFM25: processes the functionally critical high-end profile EQUIPMENT – Process: Infeed via conveyor belt → Machining → Ejection – Industrial control with touch operation, quantity input and counter – System software configured for 6 products, easy changeover – Closed-loop stepper motors, milling spindle 2.2 kW/ER20 – Integrated vacuum, extraction Ø 90 mm – CE marking with declaration of conformity – 1-day on-site training included during handover TECHNICAL DATA – Year of construction 2025, used, very good condition – 230 V / 50 Hz, pneumatics 6–8 bar – Repeatability approx. ± 0.01 mm – Weight approx. 150 kg per machine PERFORMANCE Crodpfx Aie Afbvrsioi – approx. 40,000 pieces / 1-2 shifts per machine and month – Material consumption approx. €0.10 / piece – Achievable selling prices up to approx. €3.80 / piece Inspection with test run possible in Germany at short notice, handover by arrangement. Sold as seen, excluding any warranty for material defects and only to businesses. All information is based on experience and is without guarantee. Only the written purchase agreement is binding.

Condition: used, functionality: fully functional, OMEC 750 CE Drawer Joint Milling Machine This machine is designed for creating joints, particularly for drawers and boxes. The operator simultaneously places two elements to be joined, and the machine then automatically mills along the entire length. Crode Ah Tfhspfx Aiiji The spindle is mounted eccentrically. Milling motor power: 1.1 kW Spindle speed: 18000 RPM Two operating speeds: 25 and 35 m/min Machining parameters: Front thickness: min/max: 7/60 mm Side wall thickness: min/max: 10/30 mm Mortise height: min/max: 6/18 mm CE certified Machine dimensions: 1300x700x1200h mm

Condition: excellent (used), CATALOGUE NUMBER 6607 TECHNICAL DATA Circular saw: - max. saw blade diameter 350mm - spindle 30mm - spindle locking - blade adjustable front/back, up/down - blade guard Codozc I Tpspfx Aiijri - motor 1.1kW - dust extraction port diameter 80mm Milling machine: Arbor: - spindle diameter 40mm - spindle working height 140mm - spindle locking - max. milling cutter diameter 350mm - 2 speed settings 3000, 4500 rpm - motor 5.5kW - brake - side carriage – manual feed - carriage dimensions length/width 1180x600mm - angle ruler - 2 pneumatic clamps - dust extraction port diameter 120mm - dimensions length/width/height 2600 (for shipping 2000)/1600/1450mm - weight 735kg – very good condition – used milling machine Net price: 13900 PLN Net price: 3233 euros, depending on the exchange rate, 4.30 euros (Prices may vary in case of significant fluctuations)

Condition: used, machine/vehicle number: 190667 W 10, functionality: unexamined, power: 4.5 kW (6.12 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, spindle diameter: 30 mm, Schelling stationary table milling machine, type FZ-4, Milling spindle D = 30 mm, Max. clamping length 140 mm, Max. height adjustment 100 mm, Motor approx. 4.5 kW, Table size 1100 x 900 mm, Crsdpe Af Ux Ajfx Aiiei Table height 860 mm, Weight approx. 740 kg, Incl. Holzkraft 3-roller feed system, As inspected at the Seevetal location, Ex works, excluding transport, Subject to prior sale.