Used milling machines (window production) for sale (171)

Condition: good (used), Year of construction: 2010, functionality: fully functional, Phantomatic T3A incl. swivel device for angled head Machine features: - CamPlus - Barcode reader - Touchscreen - Overlength function up to 8000 mm - 6-sided machining - Swivel device for angled head - Angled head Travel range X-axis (longitudinal axis): 4300 mm Cedez Adx Hjpfx Agrshd Travel range Y-axis (transverse axis): 270 mm Travel range Z-axis (vertical axis): 300 mm Electric spindle 1 HSD – max. 18,000 rpm – power 5.5 kW Tool magazine capacity: 9 Angular gearbox for side machining, rotatable Number of clamping devices: 4 incl. automatic positioning of the clamping devices Weight: 1,950 kg

Year of construction: 2005, condition: excellent (used), functionality: fully functional, elumatec SBZ150 Profile Machining Centre 6.0 m 5-axis control. Efficient machining of aluminium and steel profiles Working length: 6,000 mm Description: Short tool change times; Automatic tool changer for eight standard tools and three special tools (saw blade, special milling cutter diameter 50 mm, angle head or special milling cutter diameter max. 100 mm); Six-sided machining; Underside machining with angle head (option); Rapid base positioning (up to 60 m/min) of the processing unit in the X-axis; Low-wear direct drive; With automatic clamp detection and positioning; Dual-circuit clamping system with two pneumatically retractable stops; Standard with automatic central lubrication system; Cjdpfx Aow A Rv Iegrohd Robust machine bed for a working length of 6,000 mm; Continuous support table; Clamping system with integrated six-row recirculating roller units and linear guides. 5-axis industrial PC control, with 3 axes for path control; High-dynamic three-phase servo drives with resolver and digital servo controller; Swivel angles of the A and C axes freely programmable; With color screen and disk drive; Memory capacity of over 200,000 sets; 3 serial and 1 parallel interface for online connection; Barcode scanner, label printer, etc. Integrated network card 10/100 MBit, RJ 45 port (network connection by customer’s IT administrator) Analog modem (customer must provide an analog telephone line) Technical data: Travel range X-axis: max. 6,240 mm Max. travel speed 60 m/min. Travel range Y-axis: 1,000 mm Max. travel speed 30 m/min Travel range Z-axis: 635 mm Max. travel speed 30 m/min. Swivel angle A-axis: 0-90° freely programmable Swivel angle C-axis: 0-355° freely programmable Further details on the milling range see drawing no. 150 05 17 08 Max. processing length for face machining left + right: 6,000 mm (with tool length 150 mm) Positioning accuracy: X-axis +/- 0.1 mm / 1 m length Y-axis +/- 0.1 mm Z-axis +/- 0.1 mm Milling spindle: Speed [rpm]: up to 100–22,000 Power [kW]: 15 Tool holder: HSK-F 63 Milling cutter diameter: 100 mm max. Saw blade diameter: 400 mm Tool length: max. 150 mm from nominal taper. Included accessories: Automatic tool changer (without tool holders); Dual-circuit clamping system with 2 pneumatically retractable material stops; Automatic clamp detection and positioning; 8 horizontal pneumatic material clamping units; Tool presetting gauge Front light barrier Saw blade D400 with mount Angle milling head Important: The profile machining centre is fitted as standard with front light barriers. Any necessary side or rear guarding must be supplied on-site by the customer or please request an offer for safety fences from us. Incl. Angle milling head for underside machining

Year of construction: 2007, condition: good (used), functionality: fully functional, EMMEGI PHANTOMATIC T4 STAR Cjdpfxoyxtbrs Agrjhd

Year of construction: 2005, condition: used, Rotatable support table between 0° and 180°, allowing 3-sided processing in one clamping 2 speeds, 6,000 or 12,000 revolutions per minute preselectable, allowing both steel and aluminum profiles to be processed Cedpfx Agez Hx Iusrehd 4 pneumatically controllable copy pens Pneumatic material clamping Minimum quantity spray device Profile width: 30-120 mm Profile height: 50-100 mm Bar length: 490 - 3,000 mm Weight: about 350 kg

Year of construction: 2004, condition: used, Speed: 12,000 revolutions per minute Pneumatic material clamping via foot switch Minimum quantity spray device Milling area: 300 x 120 mm Hub: 115 mm Weight: approx. 200 kg Chodpfx Agszyapcored

Year of construction: 2009, condition: used, 3-axis machining center with automatic tool change for aluminum or PVC profiles Max. travel X-axis: 3,850 mm Max. travel Y-axis: 350 mm Csdpfxsyqyaqj Agrohd Max. travel Z-axis: 280 mm Windows control with USB connections Speed continuously adjustable up to 22,000 RPM handheld control unit minimum quantity spraying Tool changer with 2 magazines (total 10 places plus angle head) tensioner detection and tensioner displacement 2 light barrier ranges and 2 material stops, enabling pendulum operation A total of 8 material clamps Spindle in good condition, spindle-insertion force: 12 kN Weight: approx. 2,000 kg

Year of construction: 2005, condition: used, CNC Machining Center Elumatec SBZ 122, year of manufacture 2005, designed for machining aluminum profiles for windows, curtain walls, and light metalwork. This is a robust and reliable industrial machine, highly regarded for its machining precision and operational continuity. Main features: - 3-axis CNC machining center - High-rigidity steel frame - Vertical spindle for milling, drilling, and complex operations - Worktable with pneumatic vices for stable and precise clamping - Long-travel longitudinal axis, ideal for processing profiles of considerable length - Protective enclosure with chip conveyor - Elumatec CNC control unit - Ideal for medium to high production and repetitive operations Applications: - Milling - Drilling - Slotting - End and face machining - Production of aluminum frames and special profiles Key data: - Manufacturer: Elumatec - Model: SBZ 122 - Year of manufacture: 2005 - Condition: Used Condition: Chsdpsyg Ht Aefx Agrjd - Machine in good overall condition - Coming from an industrial environment - Can be seen in operation by appointment Included equipment: - Complete workbench - Pneumatic clamping system - Control panel - Original covers and safety guards

Condition: used, EMMEGI PHANTOMATIC M4L 4-axis CNC machining centre, manufactured in 2022, designed for machining aluminium, PVC and light alloy profiles. The machine is equipped with a high-speed electrospindle featuring an HSK-F50 tool holder, automatic A-axis rotation and a double tool magazine, making it ideal for milling, drilling, slotting, end milling and machining operations on multiple sides of the profile. MACHINE DETAILS Manufacturer: EMMEGI S.p.A. – Italy Codpfxe Afnl Te Agrjhd Model: PHANTOMATIC M4L Year of manufacture: 2022 Machine type: 4-axis CNC machining centre Certification: CE with original Declaration of Conformity TECHNICAL SPECIFICATIONS Axis Travel X-axis (longitudinal): 3,000 mm Y-axis (transverse): 274 mm Z-axis (vertical): 390 mm A-axis: automatic rotation from 0° to 180° Positioning Speeds X-axis: 56 m/min Y-axis: 22 m/min Z-axis: 22 m/min X/Y/Z axis acceleration: 3.3 m/s² Electrospindle Power: 4 kW (S1 continuous duty) Maximum speed: 20,000 rpm Tool holder interface: HSK-F50 Liquid cooling system Automatic A-axis rotation: 0°–180° A-axis rotation speed: 6,600°/min Machining Capacity X-axis longitudinal travel: 3,000 mm Usable working length with tool magazine: up to 2,815 mm, depending on configuration Extended-length machining capability: up to 5,630 mm, depending on machine configuration and operating conditions Multi-side profile machining capability MAIN FEATURES AND EQUIPMENT Double tool magazine Electrospindle with HSK-F50 tool holder interface CNC control system with operator monitor and keyboard Automatic A-axis rotation Pneumatic clamps for profile positioning and securing Fully enclosed safety guarding Pneumatic clamping system Technical documentation and operating manual Original CE Declaration of Conformity APPROXIMATE OVERALL DIMENSIONS Length: 3,707 mm Depth: 2,139 mm Height: 2,482 mm AVAILABILITY MACHINE AVAILABLE FROM JANUARY 2027

Year of construction: 2021, condition: used, Rotatable support table between 0° and 180°, allowing 3-sided processing in one clamping 2 speeds, 6,000 or 12,000 revolutions per minute preselectable, allowing both steel and aluminum profiles to be processed 4 pneumatically controllable copy pens Chodpfx Agezx U Iwsrjd Pneumatic material clamping Minimum quantity spray device Profile width: 30-120 mm Profile height: 50-100 mm Bar length: 490 - 3,000 mm Machine in like-new condition

Year of construction: 2004, condition: used, Emmegi Comet Isola, 4 Axis CNC Vertical Machining Centre for Milling, Drilling and Tapping Aluminium with Emmegi CNC Control (Isac Cam Editor), Bed Length 6800mm, X Axis 5500mm, Y Axis 525mm, Z Axis 380mm, Pneumatic Vices and Auto Vice Positioning. S/No. M271748 (2004) Machine Weight 5300kg Csdpfx Agez Rnwzsrohd Location: These lots are located in Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Year of construction: 2003, condition: used, 4 controlled axes for profile machining Travel path X-axis: 7,200 mm Rotation A-axis: 0°-180° Speed range: 0-18,000 RPM. Chjdsyz T Iqepfx Agred Tool changer with 8 positions on the machine plus additional tool changer in the bed Automatic belt tensioner displacement Profile editing Generation X, with Schüco CAM software and controllable about SchüCal+ - calculation program Operating hours: Machine on: 15605 h / NC on: 3691 h. Accessories / Equipment: Standard tool set (used) 5.5 kW spindle (New spindle inverter) (New PC / Control) The machine is overhauled, calibrated and immediately available for delivery. Weight: approx. 5,000 kg

Year of construction: 2014, condition: good (used), The Elumatec SBZ 130 is a 3-axis profile machining center designed for efficient processing of aluminum, steel, and stainless steel profiles. All operations, such as milling, drilling, and threading, are performed on a stationary profile, which protects its surface. - Axes: 3-axis control, with a tool spindle as an additional axis. - Machining length (X-axis): 7200 mm - Travel (Y-axis): standard 485 mm (Vmax. 60 m/min) - Travel (Z-axis): standard 340 mm (Vmax. 60 m/min) - Spindle speed: standard 6000 rpm, optional high-speed spindle (18,000 rpm) - Spindle power: 5.5 kW - Tool magazine: integrated revolving tool head for 8 tools or 4 angled heads, ensuring short tool change times - Control: Windows operating system with eluCam software; 18.5" PC panel, with USB ports and network connection - Clamping system: automatic positioning of pneumatic clamps - Compressed air supply: 7 bar MACHINE: Prepared tooling dedicated to PVC and steel processing: - Tool holders, - Reducer for steel processing, - Special tools with chip breakers, Cedpsyt H Uysfx Agrjhd - Dedicated programs for processing door profiles. The head was replaced in 2025.

Year of construction: 1998, condition: used, 3-sided machining in one setting Speed: 12,000 revolutions per minute Csdpfezwl R Tox Agrjhd 2 pneumatic tracers at the bottom, 1 tracer at the top Pneumatic material clamping Minimum quantity spray device Milling area vertical (top): 330 x 130 mm Milling area horizontally (from the front or rear): 220 x 95 mm Stroke: 110mm With side stops Weight: about 350 kg

Condition: new, – 2 pneumatic clamping devices – Idle speed 11,000 rpm – Mist lubrication system – Material stop – Blow gun – Documentation – 230V Cjdsz Egkzepfx Agrohd

Condition: used, Aluminium window production machines for sale. 2 x DGS Emmegi NORMA 400, notching saw GRAULE AS450, 2 x corner press ELUMATEC, copy router ELUMATEC, notching mill RINALDI, punch ANC001FL, glazing bead saw EMMEGI 300s. Chsdpfjxvaw Ssx Agrsd

Condition: ready for operation (used), Assfalg ASO 650 S Edge Milling Machine, Chamfering Machine, Deburring Machine Maximum chamfer width: 0-7mm Cedpfx Agjzy E D Sorshd Angle adjustment: 15°-45° Dimensions: approx. 400 × 500 × 300 mm Weight: approx. 52 kg Radius [mm]: 1.2 | 2 | 2.5 | 3 | 4 | 6 You are welcome to visit us for an inspection. We can gladly arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data as well as errors in the description of the item may occur and are subject to change.

Year of construction: 2007, condition: used, 3-axis machining center with automatic 8-station tool changer for aluminum or PVC profiles Max. Travel distance X-axis: 4200 mm Chedjw Axfqopfx Agrsd Max. travel Y-axis: 480 mm Max. travel range Z-axis: 325 mm Control E 500 Speed continuously adjustable up to 6,000 rpm handheld control unit minimum quantity spraying Bidirectional angle head and a high-speed spindle Wrench measurement 8 pneumatic material clamps Light barrier Very good condition

Year of construction: 2006, operating hours: 7,000 h, condition: excellent (used), functionality: fully functional, X-axis travel (longitudinal axis) mm 7280 Y-axis travel (transverse axis) mm 525 Z-axis travel (vertical axis) mm 380 A-axis rotation (spindle rotation) mm from 0° to 180° continuous Maximum positioning speed X-axis m/min 80 Maximum positioning speed Y-axis m/min 60 Maximum positioning speed Z-axis m/min 30 Maximum A-axis positioning speed From 0° to 90° in 1" Electrospindle power kW 7 Electrospindle speed rpm variable up to 20,000 Tool holder taper HSK-40E Tool magazine capacity qty. 8 Number of clamps qty. 8 Automatic clamp positioning Installed power kW 16 Residual-current circuit breaker on main line A 0.3 Weight t 4.8 Chedpfx Aoyi Umpsgrod Operating pressure bar 6 ÷ 8

Year of construction: 2006, condition: used, 3-axis machining center with automatic tool change for aluminum or PVC profiles Max. travel X-axis: 3,850 mm Chsdpfox Ecfkex Agrsd Max. travel Y-axis: 350 mm Max. travel Z-axis: 280 mm Control E 550 Stepless speed control up to 21,000 rpm Manual control device Minimal quantity spray Automatic tool changer with magazine (4 slots plus angle head) Spanner measurement and clamp displacement 4 pneumatic material clamps Light barrier Weight: approx. 2,000 kg

Year of construction: 2012, condition: excellent (used), functionality: fully functional, - Power (kW): KFB 353 = 1.5 Chodpfxjwzivde Agrjd - Voltage (V): 400 - Air pressure (bar): 7 - Air consumption (l/min): min. 250 - Revolution shaft (min-1): KFB 353 = 12,000 - Maximum cross section of the workpiece WxH(mm):190x111 - Milling range L x W (mm): 300 x 130 - Milling depth (mm): 200 - Machine dimensions L x D x H (mm): 3,500 x 820 x 1,650 Dpro2J - Weight (kg): approx. 420 - Workable material: KFB 353 = PVC and aluminum profiles

Year of construction: 2022, condition: excellent (used), 5-axis Machining center independent clamp movement 16 positions tool magazine Cedpfx Aeu A Uq Isgrjhd chip conveyor belt (horizontal) 2° chip conveyor belt (vertical) tool lenght probe 10 toolholders HSK 63 UPS 11 kW spindle with liquid cooling 5 axis blade diam 450 mm automatic greasing kit extra blade unit 90° on moveable carriage wireless bor code reader

Year of construction: 2009, condition: used, travel distance X-axis: 7,530 mm, travel distance Y-axis: 1,180 mm, travel distance Z-axis: 660 mm, spindle speed (max.): 18,000 rpm, Equipment: CE marking, documentation/manual, No. 3281 CNC profile machining center Schüco PBX AL 7200 Used, year of construction 2009 According to our customer / the previous owner, the machine is fully functional and can be viewed on site 4-axis CNC machining centre for milling and drilling thin-walled aluminium profiles and structural steel profiles made of steel grades S 185 to S 275 Suitable for window and door profiles Max. profile wall thickness 5 mm Max. depth of cut in aluminium 2 - 3 mm Max. depth of cut in steel 1.5 - 2 mm Max. profile machining length 7200 mm X-axis travel 7530 mm Y-axis travel 1180 mm Z-axis travel 660 mm X-axis travel speed max. 60 m/min Y- and Z-axis travel speed max. 30 m/min A-axis rotational speed max. 17 rpm A-axis rotation angle max. 180° Machining on three sides of the profile Positioning accuracy +- 0.1 mm / 1000 mm Spindle power 5.5 kW at 6870 rpm Spindle speed max. 18000 rpm Tool holder SK 30 8-position tool magazine Tool change time approx. 12 - 14 s 8 pneumatic clamping blocks with automatic positioning Double clamping unit for holding two profiles Front clamping position max. 250 x 200 mm WH Rear clamping position max. 120 x 200 mm WH CNC control Schüco CAM and SchüCal PC operator station with monitor and keyboard Electrical connection 400 V / 50 Hz / 3 phases Rated current consumption 35 A Required on-site fuse protection 50 A per phase Pneumatic operating pressure 6 bar Minimum supply pressure 4.5 bar Max. short-term air flow rate 150 l/min CE marking Technical documentation available as PDF file Weight approx. 3450 kg Csdpez Evb Ajfx Agrshd Sale on behalf of customer, ex location near 080 01 Presov (Slovakia), without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: N1A665853, tool weight: 30,000 g, input voltage: 400 V, Machining center Rumba -4 axes Machining length 4000 mm Ppsbtxbqohywz So H Ijr CNC controlled machining center with vertical machining spindle, suitable for machining extruded aluminum profiles, light metals, PVC and steel from 3 sides. Controlled tilting work table: -90°/0°/+90° with intermediate angles. The machine is equipped with a 4Kw, 18000 rpm electrospindle, controlled by an inverter and a quick tool changer (tool changer) with an ISO30 spindle. Interpolation of the X, Y, Z and W axes controlled numerically. Brushless motors for positioning the X, Y, Z and W axes. Complete with 4 pneumatic double clamps, tool diameter correction by software. Axis movements on linear guides. Left profile stop. 10.4-inch color monitor (touch screen with simplified Windows-based graphics, Teamviewer for remote maintenance, special software HICAM 2 / CAMPROX for loading ISO files and running programs). Possibility to edit longer parts. Standard equipment: 4kw ISO30 electrospindle 4 pneumatic clamps (manually adjustable) Chodpjwgm Ibefx Agrjd Safety cover Automatic tool changer (10 tools) 4x ISO30 cone included with the tool 3x chip collection compartments air nozzle Technical data: X-axis stroke 3000 mm / 4000 mm Y-axis stroke 400 mm Z-axis stroke 300 mm Rapid traverse (X, Y, Z): 50 m/1' Acceleration (X, Y, Z): 1.5 m/s2 Electric spindle: 6.6 kW HSK63 Spindle cooling: Air, liquid cooling Max. tool length: 130 mm Max. tool diameter: 140 mm (blade) Working pressure: 7bar Weight: 2500kg

Year of construction: 2018, condition: excellent (used), The following systems can be processed: Profile Kömmerling, 76AD, 76MD, 76Unity, 88MD # High-temperature welding # Quick-change system for welding strips Quick-change system for shims Diagonal or parallel joining process Resilient intermediate plates for tolerance compensation Heated boundary plates Welding bead limitation on support and clamping plates 2 mm (optionally 0.2 mm possible) Heated welding bead limitation Individually programmable welding parameters Safety device according to CE Horizontal discharge device Control technology High-performance JetControl control ensures high user-friendliness Intuitively operable information management system with diagnosis and reporting tool Digital visualization of maintenance intervals Display of the profile strips to be inserted, indication for profile and shim changes Individually programmable welding parameters Operating system Windows Cjdpfx Agoz Ep Ezerjhd High-quality PC with 19" TFT monitor USB ports DVD drive # Keyboard and mouse # Data management via database Technical data: Overall depth min.: 45 mm Overall depth max.: 120 mm Profile width min.: 25 mm Profile width max.: 130 mm Working area: 3,000 x 2,300 mm Element size min.: 320 x 320 mm Element size max.: 2,600 mm in the direction of travel Element size max.: 3,000 mm width Element weight max.: 80 kg Electrical connection: 230 / 400 volts, 3 phases, 50 Hz Compressed air connection: 7 bar # Air consumption: 50 l/min

Year of construction: 2005, condition: excellent (used), functionality: fully functional, -Maximum milling cutter diameter: 280 mm -Milling cutter arbor bore: 40 mm -Feed: manual -Power: 2.5 kW at 400 V/50 Hz -Milling spindle speed: 2,800 rpm Cjdpeyyma Rjfx Agrehd -Compressed air connection: 7 bar -Air consumption: 10 liters per working cycle, with minimum quantity lubrication: 20 liters -Length: 1,540 mm, depth: 905 mm, height: 1,200 mm, weight: 248 kg