Used milling machines - univ.NC/CNC 500-699mm X-axis travel for sale (107)

Condition: used, Year of construction: 2017, Milling machine Optimium Optimil F 105 Ijdpfeyphnyjx Ahvstd

Year of construction: 1989, condition: used, Hermle Universal Milling Machine Type UWF 801 working range longitudinal X axis 500 mm transverse y axis 430 mm vertical Z axis 400 mm clamping surface 800 x 220 tool holder SK 40 Itjdpfx Aeihqatohvod spindle motor 3 KW quill stroke vertical 80 mm Control TNC 114

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 Iedpfxju Tln No Ahvstd - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Condition: used, CNC Milling Machine ABENE Type VHF-360TI serial no. 36084 year of construction 2008 CNC control HEIDENHAIN TNC 320 Travel X: 650 mm, Y: 510 mm, Z: 450 mm Table size 1200 x 400 mm Spindle holder SK 40 Spindle speed 55 - 3000 rpm. 2 steps Feed speed 30 - 4000 mm/min. infinitely variable Rapid traverse speed (X + Y-axis) 4000 mm/min. Rapid traverse speed (Z-axis) 2000 mm/min. Spindle nose-to-table distance 20-495 mm Motor power spindle drive 7.5 kW Mains connection 400 Volt, 50 Hz - CNC contouring control HEIDENHAIN TNC 320 with RS232, USB and LAN interfaces - Electronic handwheel - mechanical handwheels for X and Y axis - Spindle speed manually switchable with 2 gear stages (stage 1 = 55-700 rpm) + (stage 2 = 701-3000 rpm) - Inclined bed concept with laterally mounted swivel spindle head +/- 50° - Manual inclined bed adjustment via hand crank - Hydro-mechanical tool clamping - Automatic central lubrication - Coolant system with electric cooling lubricant pump opposite - Machine light - Switch cabinet permanently attached to the machine - Operating hours of control unit on = 14780 hours - Read operating hours machine on = 12980 hrs. Itedpety A Ehjfx Ahvjd - Read operating hours program run = 400 hrs. Space requirement L x W x H 2600 x 2000 x 2000 mm Weight 2500 kg Very good condition

Condition: used, Year of construction: 2004, Technical details: x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm number of spindle speeds: 63 - 3.150 1/min feed stepless: 12-3000 / 6-1500 (Z) mm/min quill stroke: 100 mm milling-head swivable +/-: 90° spindle taper ISO: SK 40 surface area: 630 x 400 mm total power requirement: 8 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 2 x 1,9 x 1,95 m universal milling machine with point to point control, mechanical handwheels, swivel - rotary table (mech.) +-45°, hydr. tool clamping, half cabin, coolant device, manuals (German language) * Itjdpfxsk Hdu Dj Ahvod

Condition: good (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, mount diameter: 40 mm, total height: 1,800 mm, total width: 1,500 mm, total length: 1,600 mm, table width: 800 mm, table length: 395 mm, For sale is a conventional milling machine from the Hermle brand and the type UWF 801 The machine is fully functional, easy to use and yet efficient, which makes it ideal for the DIY enthusiast but also for industry. x-travel: 500 mm y-travel: 430 mm z-travel: 400 mm Spindle mount ISO: SK40 Spindle head swivels left and right: right/left = 90° ° Quill stroke vertical: 80 mm Speed range: 40 - 2000 / 18 step rpm Itodpfx Ahovtpl Rjvjd Feed: X+Y: 4 - 1600 steples mm/min Feed: Z: 4 - 1000 steples mm/min Rapid traverse: X+Y: 1.6 and Z: 1 m/min Table size: 800 x 395 mm Spindle drive: 3 kW Weight approx.: 1300 kg Transport dimensions LxWxH: 1.6 x 1.5 x 1.8 m Chip collection tray Transport and loading can be organized throughout Europe on request for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit us on our website

Condition: used, feed length X-axis: 500 mm, feed length Y-axis: 430 mm, feed length Z-axis: 400 mm, For sale is a package of four identical Hermle UWF 801 milling machines. Two of the machines have minor defects that require repair, while the other two are fully functional. This package is offered, but individual machines are also available for sale at the regular price. Technical specifications: X-travel: 500 mm Y-travel: 430 mm Z-travel: 400 mm Spindle mount ISO: SK40 Spindle head swivels left and right: right/left = 90° Quill stroke vertical: 80 mm Speed range: 40 - 2000 / 18 step rpm Feed: X+Y: 4 - 1600 step mm/min Feed: Z: 4 - 1000 step mm/min Rapid traverse: X+Y: 1.6 m/min and Z: 1 m/min Table size: 800 x 395 mm Spindle drive: 3 kW Approx. weight: 1300 kg Transport dimensions LxWxH: 1.6 x 1.5 x 1.8 m Chip collection tray Tool holders, tools, and vice are not included in the package. However, they can be offered individually. Transport and loading can be arranged throughout Europe upon request for an additional charge. Itsdpjv Tc Apofx Ahvjd Prices exclude VAT. Viewings are available by appointment. Contact us; our team will be happy to assist you. Trade-ins or exchanges are possible! Machine Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, visit our website.

Condition: repair required (used), functionality: limited functionality, travel distance X-axis: 500 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, mount diameter: 40 mm, total height: 1,800 mm, total width: 1,500 mm, total length: 1,600 mm, table width: 800 mm, table length: 395 mm, For sale is a conventional milling machine with active control from Hermle and type UWF 801 A hydraulic hose is defective and has already been removed and replaced. After installation, the machine is fully functional and ready for use (we can do this for you) The machine is easy to use and yet efficient, which makes it ideal for the do-it-yourselfer but also for industry. Itsdpfxsvtpm Us Ahvjd x-travel: 500 mm y-travel: 430 mm z-travel: 400 mm Spindle mount ISO: SK40 Spindle head swivels left and right: right/left = 90° ° Quill stroke vertical: 80 mm Speed range: 40 - 2000 / 18 step rpm Feed: X+Y: 4 - 1600 steples mm/min Feed: Z: 4 - 1000 steples mm/min Rapid traverse: X+Y: 1.6 and Z: 1 m/min Table size: 800 x 395 mm Spindle drive: 3 kW Weight approx.: 1300 kg Transport dimensions LxWxH: 1.6 x 1.5 x 1.8 m Chip collection tray Transport and loading can be organized throughout Europe on request for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit us on our website

Condition: used, table width: 800 mm, table length: 450 mm, A Mikron milling machine is for sale in good, used condition, as shown in the pictures. Technical data: • Manufacturer: Mikron • Model: WF-21C / 150 • With Heidenhain TNC 150 control • Table: approx. 800 x 450 mm • Condition: Used Shipping by freight forwarder possible (depending on postal code) Itedpfxeympa Es Ahvjd International buyers are welcome! You will receive an invoice with VAT shown separately. Viewing/collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free loading. Errors in technical data and prior sale reserved.

Condition: excellent (used), Year of construction: 2007, Universal milling machine Manufactured by KUNZMANN. WF 650 Year of manufacture 2007 Technical specifications Manufacturer Kunzmann Type WF 650 Year of manufacture 2007 X-axis 650 mm Y-axis 500 mm Z-axis 450 mm Clamping area 1000 x 600 mm Spindle mount SK 40 Spindle speeds 5 - 6500 rpm Quill stroke 60 mm Vertical head swivels +/- 90 Max. table load 400 kg Feed rates - longitudinal/transverse/vertical 0 - 4000 mm/min Rapid traverse 25 / 25 / 20 m/min Distance between table and vertical milling spindle 100 / 550 mm Distance between table and horizontal spindle 270 / 720 mm Number of tool magazine positions: 20 Tool diameter: 95 mm Tool diameter with 2 free positions: 135 mm Max. tool length: 300 mm Max. tool weight: 7 kg Spindle power: 13 kW Total power requirement: 20 kVA Machine weight: approx. 5.5 t Machine dimensions: L x W x H: 3.80 x 2.70 x 2.40 m Equipment - Heidenhain iTNC 530 control system - Operating instructions Itedpfx Ahowhm S Nevjd - Enclosure - Vertical head with extendable spindle sleeve - Hydraulic tool clamping - Fixed table - Electronic handheld control panel - Coolant system - Chip conveyor All information is subject to change without notice. A demonstration is available at any time in our showroom.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 370483, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 5,000 rpm, controller model: HEIDENHAIN TNC 124, TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 400 mm Travel Z-axis: 400 mm Table length: 800 mm Table width: 425 mm Max. workpiece weight on table: 250 kg Distance between vertical spindle and table: 560 mm Spindle taper: SK 40 Max. spindle speed: 5,000 rpm Swiveling range vertical milling head: ± 90° Feed rates: up to 2,000 mm/min Rapid traverse X-axis: 10 m/min Rapid traverse Y-axis: 10 m/min Rapid traverse Z-axis: 8 m/min Vertical quill stroke: 60 mm MACHINE DETAILS Control: HEIDENHAIN TNC 124 Connection: 50 Hz 3x 400 Volt Milling spindle motor: 5.5 / 7 kW Total power consumption: 15 kVA Dimensions & Weight Machine weight: approx. 1,800 kg Dimensions (L x W x H): 2,100 x 1,800 x 2,050 mm Ijdpsyhnmtjfx Ahvstd EQUIPMENT Rigid angle table Electronic handwheel Heidenhain probe Vertical milling head Full splash guard cabin Coolant system Machine lamp

Condition: excellent (used), Year of construction: 2010, feed length X-axis: 650 mm, feed length Y-axis: 500 mm, feed length Z-axis: 475 mm, feed rate X-axis: 6,000 m/min, feed rate Y-axis: 6,000 m/min, feed rate Z-axis: 6,000 m/min, table width: 450 mm, table length: 1,530 mm, X-Axis: 650mm Y-Axis: 500mm Z-Axis: 475mm Iodpfjxtmqtex Ahvetd Table Length: 1530mm Table Width: 450mm Table load: 350 Spindle speeds: 55 - 4000Rpm Feed rate X-Axis:6000mm/min. Feed rate Y-Axis:6000mm/min. Feed rate Z-Axis:3000mm/min. Length: 2300mm Width: 2550mm Height: 2200mm Weight: 2850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2024, functionality: fully functional, - Swiveling control panel - CNC control SIEMENS 828D - Motor for horizontal and vertical spindle - Feed motors with inverter - Ball screws for X/Y/Z axes - Automatic 2-stage gear box for spindle speeds - 1 long milling mandrel 27 mm - 3 reducing sleeves (MK1, MK2, MK3) - Pneumatic hydraulic clamping system for the vertical spindle - Spindle protection with safety switch - Protective cover in the work area with electrically secured doors - Counterholder for horizontal milling - LED work light - Automatic central lubrication system - Safety handwheels for X/Y/Z axes - Coolant system with chip tray - Guideway covers - Base plates and adjusting screws - Operating tools - Technical documentation - CE version - Colors: * RAL 7024 - Graphite gray * RAL 7035 - Light gray Technical data: Fixed angle table: - Dimensions of the work surface: 1,000 x 500 mm - T-slots: Number / width x distance: 8 pieces / 14 x 63 mm - Max. table load: 250 kg Vertical table: - Dimensions of the work surface: 1,200 x 250 mm - T-slots: Number / width x distance: 3 pieces / 14 x 63 mm Travel paths: - Axis travel paths: automatic/manual - Longitudinal (X): 600 mm - Transverse (Y): 500 mm - Vertical (Z): 400 mm Isdpfx Ajvupa Rohvetd Feed rates: - Control: stepless - Range (X,Y,Z): 0 – 2,000 mm/min. - Rapid traverse - X,Y,Z axes: 5,000 mm/min. - Rapid traverse - Z axis: 4,000 mm/min. Horizontal spindle: - Tool holder: DIN 2080 / ISO 40 - Speed range (2 levels): 0 – 3,200 rpm. Vertical milling head: - Tool holder: DIN 69871 / / ISO 40 - Speed range (2 levels automatic): 0 – 3,200 rpm - Head swivel: +- 90° - Distance spindle nose/angle table: min/max.: 70 – 470 mm - Distance spindle center to column: min./max.: 160 / 660 mm Motors: Main drive power: 7.00 kW Feed motor power X-Y-Z: 2.85 KW Dimensions and weight Dimensions (W x D x H): 2,850 x 1,950 x 1,900 mm Weight: 1,950 kg

Condition: excellent (used), Year of construction: 2010, feed length X-axis: 650 mm, feed length Y-axis: 500 mm, feed length Z-axis: 475 mm, table width: 450 mm, table length: 1,530 mm, table load: 350 kg, X-Axis: 650mm Y-Axis: 500mm Z-Axis: 475mm Table Length: 1530mm Table Width: 450mm Itodpfx Aoxtbkushved Table load: 350 Spindle speeds: 55 - 4000Rpm Feed rate X-Axis:6000mm/min. Feed rate Y-Axis:6000mm/min. Feed rate Z-Axis:3000mm/min. Length: 2300mm Width: 2550mm Height: 2200mm Weight: 2850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1992, Technical details: x-travel: 600 mm y-travel: 400 mm z-travel: 420 mm spindle taper ISO: SK 40 control: Heidenhain TNC 360 quill stroke vertical: 75 mm turning speed range: 20 ... 4000 U/min spindle head swivable left - right: 90° links / rechts ° feed:: X/Y/Z: 1...6000 mm/min. feed:: X/Y: 7 m/min. + Z: 6 m/min. Table dimensions: 900 x 460 mm table load capacity: 400 kg weight approx.: 2300 kg dimension machine xH: 4,0 x 3,8 x 2,0 m total power requirement: 13 kW Itodpfou Nc U Iex Ahved Equipment: - separated production cell - coolant system - control panel with swivel-mounted boom - measuring probe SK 40 Heidenhain TS 120 - oil collecting basin *

Condition: used, Technical details: x-travel: 500 mm y-travel: 380 mm z-travel: 330 mm control: Siemens 840 D / 810 D spindle cone ISO: vertikal/horizontal: 40 table surface area: 400x800 fest mm spindle turning speed - continuous: verikal/horizontal: 35-1800 U/min spindle head swivable left - right: 90 ° rapid traverse X,Y: 3,15 mm/min. rapid traverse Z-axis: 1,6 m/min feed continuous: X/Y/Z: 6,3 - 1250 Total power requirement: 7,4 kW Weight approx.: 1,8 t dimension machine xH: 1,8 x 2,2 x 1,8 m dimensions electric cabinet LxWxH: 0,5 x 0,85 x 2,1 m Machine was rebuilt in 2002, modernized with a modern control Siemens 840D/810D shopmill. - adjustment travel via counter holder slide: 440mm Equipment: - cooling system - control panel with jib arm Accessories: - various collet sleeves - div. SK 40 tapers - various milling arbors Iedpfju Nc R Nex Ahvetd i.D. *

Condition: used, Year of construction: 1990, Technical details: x-travel: 185 mm y-travel: 95 mm z-travel: 200 mm control: emco tronic TM02 spindle taper: SK 30 range of revolution per miute: 10 - 4000 / steples U/min feed continuous: 1 - 2000 / steples mm/min. rapid traverse: ca. 3,0 m/min tool turret - number of stations: 10 interface: R 232 table surface area: ca. 420 x 125 mm total power requirement: 0,8 kW machine dimensions LxWxH: 2,1 x 0,9 x 2,0 m Itsdpfjvc Awrex Ahved EMCOTRONIC TM 02 control panel Operating modes: Manual operation (manual) and/or automatic Coolant system (with feed to the milling spindle) Operation via control panel standing on 3 swivel wheels Pneumatic door protection *

Condition: repair required (used), Year of construction: 1994, functionality: limited functionality, travel distance X-axis: 650 mm, travel distance Y-axis: 400 mm, rotational speed (max.): 4,000 rpm, table load: 400 kg, controller model: Heidenhain TNC 407, TECHNICAL DETAILS Travel range X-axis: 650 mm Travel range Y-axis: 400 mm Clamping surface: 900 x 468 mm Maximum table load: 400 kg Tool holder: SK40 Spindle speed range: 20 – 4,000 rpm Drive power: 5.9 kW Tool changer: 32 positions (HTC 32) MACHINE DETAILS Control: Heidenhain TNC 407 Dimensions & weight Dimensions (L x W x H): 2,000 x 2,500 x 2,100 mm Machine weight: approx. 3,500 kg Itjdpfx Ahoyf Agcsvod Note: The machine's Simodrive is defective.

Condition: used, Year of construction: 2009, Control: Heidenhain TNC 320 Ijdpfxsx H Iyrs Ahvotd Table Clamping surface: 1200 x 450 mm T-slots: 6 x 18 H7 mm Max. load: 400 kg Feeds Longitudinal travel: 650 mm Cross travel: 510 mm Vertical travel: 475 mm Feed: stepless Rapid traverse X, Y: 4000 mm/min Rapid traverse Z: 1500 mm/min Feed motor AC (Z): 3.0 (10.5) Nm Spindle Speed range, stepless: 55 – 3000 rpm Spindle taper: ISO 40 Spindle gearbox: frequency controlled, 2-stage Spindle motor: 7.5 kW Swiveling head: 0 - 140° Dimensions Length: 2200 mm Width: 1800 mm Height: 2000 mm Weight Net weight: 2100 kg Gross weight: 2300 kg

Condition: excellent (used), Year of construction: 2011, Travel X 620 mm Travel Y 420 mm Travel Z 400 mm Table size 800 x 400 mm Mounting ISO 40 (DIN 69871A) Distance between table and spindle nose 500 Spindle speeds 4000/8000 rpm Quill stroke: 80 mm Itedpfxownbrde Ahvod Ball screws on all axes Rapid traverse X,Y,Z 5,5,4 (m/min) Power KW 10.5 (13.7) Tool clamping: Hydraulic Dimensions LxWxH 2,000x2,760x2,050 Weight approx. 1900 kg

Condition: excellent (used), Year of construction: 1990, Make: Kunzmann Type: WF5/3 Year of construction: 1990 X - axis: 500 mm Y - axis: 360 mm Z - axis: 420 mm Clamping surface: 700 x 350 mm tool holder: SK40 spindle bore: 22 mm quill stroke: 60 mm Dimensions: approx. W 1.50 x D 2.40 x H 1.90 m Weight: approx. 1.6 t Isdpfx Ahjffyfrsvjtd All information without guarantee. The machine is in a very good condition. A demonstration is possible at any time in our exhibition hall.

Condition: good (used), Year of construction: 1990, CNC Universal Milling Machine MAHO MH600-C Control MAHO 432 with universal clamping table . Itodpfx Aheurcybsvjd Spindle holder : ISO 40 Travels : X 600 mm Y 400 mm Z 500 mm Spindle speeds up to 2 000 rpm with work area enclosure Machine documentation available . Machine from tool shop in good clean general condition Ready for demonstration under power .

Condition: good (used), Year of construction: 1993, CNC universal milling machine DMG MORI Type: MH 600 C Control MAHO 532 year 1993. with automatic swivel milling head G17/G18 and B -axis rotary table. Iodpfx Ajiihxhohvstd Without tool changer. Further data see data sheet. Complete machine documentation and data backup available. Good general condition.

Condition: good (used), Year of construction: 1990, CNC universal milling machine MAHO Type: MH 500 W Control MAHO 432 Spindle holder : ISO 40 Spindle speed : 20 - 4000 rpm Travels : X 500 mm Y380 mm Z350 mm Table load capacity : 250 kg Machine in good condition from tool shop. Machine dimensions : Width 1500 mm Depth 2000 mm Height 1800 mm Weight .2100 Kg . Itsdpfer Igv Rsx Ahved Machine documentation available, machine can be demonstrated under power.

Condition: used, functionality: fully functional, machine/vehicle number: WF 74 C TNC, feed length X-axis: 900 mm, feed length Y-axis: 630 mm, feed length Z-axis: 500 mm, travel distance X-axis: 900 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 25 rpm, total height: 2,420 mm, total width: 3,573 mm, total length: 3,925 mm, table width: 600 mm, table length: 1,200 mm, input voltage: 400 V, Equipment: documentation/manual, Langsverplaatsing X -as 900 mm Dwarsverplaatsing Y - as 630 mm Hoogte verplaatsing Z - as 500 mm Afmetingen opspanvlak- tafel (LxB) 1200 x 600 mm Freeskop-opname spil (ISO) ISO 40 Boordiepte 100 mm Itodoyh Ahpjpfx Ahvod Max aantal snelheden 20 > 6300 rpm Sturing Heidenhain