Condition: excellent (used), Year of construction: 2015, Machine type: 5-Axis Machining Centre (Simultaneous) Year of manufacture: 2015 Control: HAAS CNC control to DIN 66025 X-axis travel: 762 mm Y-axis travel: 508 mm Z-axis travel: 508 mm Max. spindle speed: 15,000 rpm Spindle motor power: 22.4 kW (vector drive) Spindle taper: SK 40 (DIN 69871) Max. torque: 122 Nm (at 2,000 rpm) Table dimensions: ∅ 630 x 500 mm Max. workpiece weight: 300 kg Number of simultaneously controlled axes: 5 C-axis rotation range: 360° continuous B-axis swivel range: -35° / +110° Rapid traverse rates (X, Y, Z): 30.5 m/min Tool magazine (positions): 40+1 (side-mounted) Coolant system capacity: 284 litres Machine weight: approx. 8.2 t Cooling systems: - Through-Spindle Coolant (TSC), 21 bar - Programmable coolant nozzle (P-COOL) - Additional coolant filtration system (25 μm) - Hand rinsing gun with coolant Measuring and probing systems: - RENISHAW probing system (WIPS-R) - Work probe - Tool measurement system Chip management: - Hinged belt chip conveyor Software & Control: - High-Speed Machining (HSM) Fodpfeyhpfdsx Ac Njfu - Ethernet interface - Macros - Coordinate rotation and scaling

Condition: used, Year of construction: 2021, functionality: fully functional, Control: FANUC 0i Ffjdjyhpabepfx Ac Nou x-travel: 900 mm y-travel: 460 mm z-travel: 520 mm Table dimensions (LxW): 1.050 x 459 mm max. table load: 600 kg rapid travel x/y/z: 36 / 36 / 36 m/min max. spindle speed: 8.000 rpm Tool magazine for 30 + 1 tools chip conveyor Hand-held spray gun with coolant RENISHAW touch and spindle probe

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 164, travel distance X-axis: 250 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, controller model: GE FANUC Series 16i-M, spindle speed (max.): 14,000 rpm, TECHNICAL DETAILS X-axis travel: 250 mm Y-axis travel: 200 mm Z-axis travel: 300 mm Number of axes: 3 Max. spindle speed: 14,000 rpm Table length: 400 mm Table width: 250 mm Number of T-slots: 3 Distance between T-slots: 80 mm T-slot width: 14 mm Ffodpfx Acjyhnzkj Nou Tool magazine capacity: 48 Tool holder: HSK E40 Working feed rate: 20 m/min Rapid traverse: 30 m/min Max. feed force: 3,700 N MACHINE DETAILS Control: GE FANUC Series 16i-M Resolution: 1 µm Compressed air supply: 6 bar Electrical connection: 50 Hz 3x 400 Volt Spindle drive power: 10.4 kW Total power requirement: 18 kVA Dimensions & Weight Dimensions (L x W x H): 2,100 x 1,630 x 2,265 mm Machine weight: approx. 1,700 kg Required floor space: approx. 2 m² EQUIPMENT Vice: Jaw width 100 mm Set of tool holders Coolant system Lighting

Condition: ready for operation (used), Year of construction: 1997, operating hours: 1,564 h, functionality: fully functional, machine/vehicle number: 7015, travel distance X-axis: 1,000 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 750 mm, controller model: HEIDENHAIN TNC 426, spindle speed (max.): 24,000 rpm, TECHNICAL DETAILS Travel X-axis: 1,000 mm Travel Y-axis: 750 mm Travel Z-axis: 750 mm Number of Axes: 4 Distance between vertical spindle and table: 115 mm Max. spindle speed: 24,000 rpm Feed rate: 1,500 mm/min Rapid traverse: 22 m/min Table length: 1,150 mm Table width: 700 mm Turret stations: 60 Tool changer type: TC 30 Number of tools: 30 Tool diameter: 77 mm Diameter with adjacent empty stations: 115 mm Max. tool length: 305 mm Tool holder: HSK A63 MACHINE DETAILS Control: HEIDENHAIN TNC 426 Connection: 50 Hz 3x 400 V Total power requirement: 40 kW Dimensions & Weight Dimensions (L x W x H): 5,220 x 3,100 x 2,840 mm Machine weight: approx. 10,500 kg Operating Hours Power-on time: 21,859 hours Operating time: 7,308 hours Spindle running time: 1,564 hours EQUIPMENT Fsdpfx Acsyhnxce Nsfu Through-spindle coolant (IKZ) Chip conveyor Rotary table, 4th axis Set of tool holders, 45 pieces Tool cabinet LISTA

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 83156, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 550 mm, controller model: DECKEL GRUNDIG MILL PLUS, spindle speed (max.): 6,300 rpm, TECHNICAL DETAILS X-axis travel: 800 mm Y-axis travel: 650 mm Z-axis travel: 550 mm Table length: 1,100 mm Table width: 650 mm Milling head indexing (B): 90° Number of tools: 25 Tool diameter: 80 mm Diameter with adjacent free positions: 160 mm Maximum tool length: 315 mm Tool holder: ISO 40 Maximum spindle speed: 6,300 rpm Feed rate: 1–15,000 mm/min Rapid traverse: 15 m/min Spindle motor: 16.2 kW MACHINE DETAILS Control: DECKEL GRUNDIG MILL PLUS Total power requirement: 29 kW Dimensions & Weight Dimensions (L x W x H): 3,100 x 2,300 x 2,500 mm Ffodpfx Aeyhnkxec Nju Machine weight: approx. 5,500 kg EQUIPMENT Coolant system Lighting

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 194-03, travel distance X-axis: 2,000 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, table width: 450 mm, table length: 2,280 mm, TECHNICAL DETAILS Travel X-axis: 2,000 mm Travel Y-axis: 400 mm Travel Z-axis: 425 mm Total number of axes: 3 Table length: 2,280 mm Table width: 450 mm Number of T-slots: 3 T-slot spacing: 150 mm T-slot width: 18 mm Spindle speed: 10,500 rpm Number of tools: 20 Tool diameter: 65 mm Diameter with free adjacent slots: 180 mm Ffsdpfx Asyhnfcoc Nou Max. tool length: 220 mm Max. tool weight: 8 kg MACHINE DETAILS Control: SIEMENS SINUMERIK 810 M Connection: 50 Hz 3x 400 Volt Spindle motor: 18 kW Total power requirement: 31 kVA Dimensions & Weight Dimensions (L x W x H): 4,000 x 3,010 x 3,040 mm Machine weight approx.: 7,200 kg EQUIPMENT Coolant system Chip conveyor Electronic handwheel

Condition: used, Year of construction: 2022, x-travel 1350 mm y-travel 950 mm Fsdpfjxfwg Nex Ac Nsfu z-travel 600 mm Control MAX 5 total power requirement 35 kW weight of the machine ca. 14 t dimensions of the machine ca. 3100x4535x3495 m

Condition: good (used), Year of construction: 1996, x-travel 800 mm y-travel 340 mm Fedpev H Sfyefx Ac Nofu z-travel 460 mm Control Fanuc weight of the machine ca. 3,5 t

Condition: like new (used), Year of construction: 2016, operating hours: 689 h, functionality: fully functional, Wonderful 3-axis machining center High-performance machining center SPINNER VC750 with Siemens (840DE-SolutionLine V2) Equipped with Siemens 840DE-SolutionLine control Hardly used, only for experimental purposes at an engineering service provider 15" color screen with graphical user interface for shopfloor programming Siemens "Shop-Mill-OPERATE" 7 Combi-Drive Ffjdpfxjyhic Ae Ac Nou Milling spindle up to 12,000 rpm, "In-Line" direct drive Power 11 kW (S6/40%) Traverses X=760 mm, Y=460 mm, Z=460 mm; 36 m/min Tool taper size 40 according to DIN 69871-A, pull studs according to DIN 69872-A Spindle taper air purge system High-speed automatic tool changer with double-arm changer for 24 tools Linear guides on all three axes Required leveling elements at the machine bed for alignment Full splash guard enclosure + coolant system + work area lighting Two-tone paint finish RAL 7035/5008 Internal coolant supply 698 power-on hours Approximately 110 spindle hours The VC750 is our dynamic and compact machining center. It is especially suitable for use in job shops and training facilities. The machine is specialized for economical and versatile production of small to medium-sized workpieces. In terms of cost efficiency, it is unmatched.

Condition: used, Year of construction: 2021, x-travel 235 mm Ffodeyiu Srjpfx Ac Nsu z-travel 520 mm control OSP p300a c-axis 360/0,001 0

Condition: like new (used), Year of construction: 2021, AUTOMATIC PALLET CHANGER Usable pallet dimensions mm2 x 650 x 400 Maximum permitted load on pallet kg2 x 250 TRAVELS AND FEEDS X axis mm 520 Y axis mm 400 Z axis mm 330 Rapid traverse X, Y mm/min 56,000 Rapid traverse Z mm/min 56,000 Working feedrate mm/min 1 ÷ 20,000 DIRECT DRIVE MOTOR SPINDLE Tool taper and shank BT30 Spindle speed rpm 12,000 Spindle motor power 30 min/continuous kW 7.5/5.5 TOOL MAGAZINE Umbrella-type tool magazine capacity 24 Fodpfx Acsyiu Due Nsfu Maximum tool diameter mm 80/100 Maximum tool length mm 200 Fixed position tool selection

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 630 mm, For sale 1 machining center Hartford LG 800S Year 2007 3 axes Fanuc A1100 Machining Capacities Axis travels X/Y/Z: 800 mm (X-axis) x 510 mm (Y-axis) x 630 mm (Z-axis) Table dimensions: 950 mm x 510 mm Maximum workpiece weight: 500 kg Spindle speed: Typically 8,000 rpm, optionally 10,000 rpm Spindle taper: BT40 (or ISO 40) Tool magazine (ATC): 24-position automatic tool changer Machine weight: Approx. 5,800 kg BT MACHINES PURCHASE AND SALE Ffjdpfoxvz Tnsx Ac Nsu ALL TYPES OF INDUSTRIAL EQUIPMENT ALL TYPES OF MACHINE TOOLS

Condition: ready for operation (used), Year of construction: 2005, operating hours: 5,934 h, travel distance X-axis: 406 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 254 mm, controller manufacturer: HAAS, spindle speed (max.): 40,000 rpm, number of axes: 3, This 3s HAAS Super Mini Mill HE was manufactured in 2005, featuring a robust Haas CNC Control and an IBAG Switzerland spindle with a maximum speed of 40,000 rpm. The machine includes an Automatic Tool Changer with a capacity for 18 tools, ensuring efficient operation. If you are looking to get high-quality machining capabilities, consider the HAAS Super Mini Mill HE vertical machining centre we have for sale. Contact us for further details. • Spindle: • IBAG Switzerland spindle • Water-cooled • Tool holder: HSK E32 • Tool changer: • Type: Automatic Tool Changer (ATC) • Capacity: 18 tools Fjdpfjyhfltsx Ac Nsfu • Working hours (from control): • Servo time: 9,158 h • Motion time: 4,984 h • Spindle time: 5,934 h • Idle time: 0:44 h • Electrical data: • Voltage: 360–480 V • Phase: 3 • Frequency: 50/60 Hz • Full load current: 20 A • Largest load: 35 A • Short-circuit interrupting capacity: 10,000 A Technical Specification Taper Size HSK 32

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 610 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, total height: 2,600 mm, overall weight: 4,300 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 5-axis Hurco VMX 24t was manufactured in 2008, featuring a Winmax Version 9 control system, a robust table size of 762 x 510 mm, and a high-speed spindle at 12000 rpm. It supports a maximum table load of 1350 kg and offers extensive X, Y, and Z travels of 610 mm each. Accessories include a coolant system with IKZ, spindle cooler, and a large chip conveyor. Contact us for more information about this machine. Additional equipment • Coolant system with IKZ (20 bar) Fodpfx Acox Nkpzj Njfu • Spindle cooler • Large chip conveyor Machine Benefits Technical Machine Benefits • Winmax version 9 control system • Table dimensions: 762 x 510 mm • Mounting: sk40 Extra Information Machine still under power Dimensions Machine Depth 2300 mm

Condition: used, Year of construction: 2009, functionality: unexamined, machine/vehicle number: 73136, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 720 mm, nominal power (apparent): 64 kVA, controller manufacturer: Heidenhain, controller model: iTNC 530, total height: 3,150 mm, total length: 5,605 mm, total width: 4,290 mm, overall weight: 12,600 kg, spindle speed (min.): 15,000 rpm, operating hours of spindle: 21,786 h, number of slots in tool magazine: 46, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, +GF+ MIKRON HPM 1350U – 5-Axis Machining Center (Year of Manufacture 2009) Used 5-axis milling machine MIKRON HPM 1350U from 2009. The machine is in operational condition and comes from ongoing production. Equipped with Heidenhain iTNC 530 control, rotary table Ø 1100 mm, 46-position tool magazine, and Renishaw OMP60 touch probe. Operating Hours (Readout): Control powered on: approx. 112,194 h Machine powered on: approx. 72,272 h Spindle running: approx. 21,786 h Programs: approx. 21,654 h Condition: Used machine with normal signs of use, technically operational. Inspection under power possible by arrangement. Work Areas Travels: X-axis: 1,350 mm Y-axis: 1,150 mm Z-axis: 720 mm (vertical spindle) / 895 mm (horizontal spindle) Spindle Standard spindle 15,000 rpm Speed range: 0–15,000 rpm Acceleration to max. speed: approx. 2.5 s Power: 38 kW (S6 = 40% duty cycle, TS = 2 min) Torque: 193 Nm (S6 = 40% duty cycle) Tool holder: HSK-A63 (DIN 69063-1, option ISO-B40/DIN 69871) Max. tool diameter: 130 mm (fully equipped) Bearing: Ceramic hybrid Ø 70 / Cronidur steel Lubrication: Lifetime lubricated Cooling: Water-cooled with corrosion inhibitor Feed Drives Feed motors: AC Rapid traverse / working feed: 32 m/min (20% duty cycle) 10 m/min (100% duty cycle) max. 15 m/min (40% duty cycle/hour) Position measuring systems X/Y/Z: Linear scales (direct) Rotary Table Clamping surface: Ø 1100 × 1000 mm, flattened on the side Table load: 1,600 kg T-slots: 8 × 18H12 + 1 alignment slot 18H7 (100 mm pitch) Centering bore: Ø 50 H6 Clamping torque: 8,000 Nm Max. mass moment of inertia: 75 kg·m² Table elevation above floor: 1,120 mm Table drive: Direct torque motor Drive torque: 1,600 Nm (40% duty cycle, 2 min) Swivel Axis (A-axis) NC swivel range: +16° to −120° Measuring system: direct, absolute Clamping principle: hydraulic, stepless Max. swivel speed: 4,000 °/min Max. working swivel torque: 600 Nm (S6 40%) Swivel time 0° → 90°: 0.9 s Tool Magazine / Changer 46-position magazine (installed as per documentation) Magazine positions: 46 Tool holder: HSK-A63 (DIN 69063-1), option ISO-B40 Max. tool diameter: 80 mm (fully loaded) 130 mm (partially loaded) Max. tool length: 300 mm Max. tool weight: 8 kg Magazine loading: 200 kg Tool change time (vertical): 11 s Coolant / Chip Disposal External coolant supply (AKZ): 40 l/min, 2.5 bar Internal coolant supply (IKZ) Electrical Data: Installed rated power: 75 kW Ffsdpfex Eh Iqox Ac Nju Connection power: 58 kW Connected load: 64 kVA Control voltage: 24 V DC Operating voltage: 3 × 400 V, 50 Hz Protection class: IP54 Dimensions & Weight Machine weight: approx. 12,600 kg (without accessories) Required space (L × W × H): 5,605 × 4,290 × 3,150 mm

Condition: excellent (used), Year of construction: 2008, CNC Machining Centre WAGNER WMC 800 R 2008 Siemens 810 D Technical data: X-axis travel: 800 mm Y-axis travel: 500 mm Z-axis travel: 510 mm Table height: 830 mm Max. tool length: 250 mm Tool diameter: 80 mm Clamping area: 800 x 450 mm Number of tool stations in magazine: 20 Spindle speed range: 8000 rpm Ffjdpfxjyhdwne Ac Nsu

Condition: ready for operation (used), Year of construction: 2003, Immediately available due to business liquidation: Hedelius CNC travelling column machining centre Type CB 80 – 2300 Year of manufacture: 2003 CNC control: Heidenhain iTNC 530 Very few spindle hours: 11,500 h Table: 2900 x 750 mm Ffedpfx Acjyitmho Nju Travel (X/Y/Z): 2300 / 800 / 600 mm Table load capacity: 2800 kg Distance spindle to table: 10 – 740 mm Spindle: SK 40 Tool magazine: 30 stations Spindle speeds: 30 – 8000 rpm Feed rates: 0 – 3000 mm/min on all axes Drive power: 25 kW Weight: 13 t Price: EUR 24,000 plus VAT ex location

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 1,200 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, controller manufacturer: HEIDENHAIN, table load: 1,200 kg, spindle speed (max.): 1,200 rpm, tool weight: 7,000 g, number of axes: 3, This 3s Takumi V12s vertical machining centre was manufactured in 2022. It features a robust table size of 1,250 x 650 mm and a maximum load capacity of 1,200 kg, making it suitable for various machining tasks. With a spindle speed of 12,000 rpm and rapid feed rates of up to 24 m/min, it offers efficient performance. Consider the opportunity to buy this Takumi V12 vertical machining centre. Contact us for further details. • Distances: • Floor to table surface: 931 mm • Spindle nose to table: 150–760 mm • Spindle center to column: 700 mm • Table: • Size: 1,250 x 650 mm • T-slots (width x pitch x number): 18 x 100 mm x 5 • Feeds: • Rapid (X/Y/Z): 24 / 24 / 20 m/min • Cutting (X/Y/Z): 1–8,000 mm/min • Manual continuous feed: 0–1,260 mm/min • Optical scales: Yes • Tool magazine (BT40): Ffodpfx Acjyhcy Ue Nou • Number of tools: 24 • Type: Disc • Max tool diameter: 80 mm • Max tool length: 300 mm • Max diameter with adjacent empty slots: 150 mm Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 900 mm, travel distance Y-axis: 430 mm, controller manufacturer: MAZATROL, controller model: Smart, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of axes: 3, This 3s Mazak VCS 430A vertical machining centre was manufactured in 2011. It features a powerful 18.5 kW spindle with a speed of 12,000 rpm and a table size of 900 x 430 mm. The machine offers rapid traverse of 42 m/min and includes a high-pressure coolant system, synchronized tapping, and tool length measurement. If you are looking to get high-quality machining capabilities, consider the Mazak VCS 430A machine we have for sale. Contact us for further details. • Operating hours: 33,000 • Spindle hours: 22,000 • Rapid traverse: 42 m/min • Installed options/software: • High-pressure coolant (through-spindle), 15 bar • Synchronized tapping • Tool length measurement • Workpiece air blast • Hand-held coolant nozzle • Automatic peck drilling cycle with load detection • G00 slope constant function • High surface smoothing on contours (High Smoothing Control) • Mazatrol-to-ISO program conversion Fsdpfx Aceyhcvio Nefu • Program memory expansion • Preparation for workpiece probe (OMP60) • Preparation for chip conveyor (left side) • MAZACC-3D high-speed software package • CNC functions and connectivity: • NC user macros • Mazak drilling/tapping cycles (Mazatrol & EIA) • EIA/ISO code input • Constant tool tip speed function • Programmable block stop (M01) • Background tool path verification (MAZACC-2D) • Up to 300 workpiece coordinate systems • Thread cutting functions • EIA canned cycles (chamfering, arc machining) • USB interface (2 ports) • LAN port Additional equipment • Chip conveyor, left-hand, hinge type (Mayfran) • 4th-axis simultaneous kit: Kitagawa NC rotary table (MR200) Technical Specification Taper Size ISO 40

Condition: used, Year of construction: 2018, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 720 mm, controller model: Mazatrol SmoothG, table width: 820 mm, table length: 3,500 mm, overall weight: 16,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 48, input voltage: 400 V, type of input current: AC, Equipment: chip conveyor, CNC Vertical Machining Center MAZAK VTC-820/30 (Year of manufacture 2018 / Commissioned 2019) The MAZAK VTC-820/30 is a high-performance CNC vertical machining center designed for precise and efficient machining of large workpieces. With generous travel distances of 3,000 mm on the X-axis, 820 mm on the Y-axis, and 720 mm on the Z-axis, this machine is especially suitable for long and complex components in mechanical engineering, mold making, and general metalworking. Fjdoyipy Rjpfx Ac Nofu The robust worktable, measuring approximately 3,500 × 820 mm, allows for the accommodation of large-dimensioned workpieces. The powerful main spindle, with speeds up to 12,000 rpm and a drive power of around 22 kW, ensures high metal removal rates and accuracy. The CAT 40 (ISO 40) spindle taper provides broad tool compatibility. The machine is equipped with a state-of-the-art MAZATROL SmoothG control system, offering intuitive operation, fast programming, and high process reliability. The 48-position tool changer enables flexible and efficient production processes, even for complex manufacturing tasks. To ensure optimal production conditions, the machining center features through-spindle coolant supply, a chip conveyor, and a lubricant preparation system. With a machine weight of approximately 16,500 kg, the VTC-820/30 offers outstanding stability and vibration damping, which has a positive effect on surface quality and dimensional accuracy. Overall, this is a modern and versatile vertical machining center that delivers high precision, performance, and reliability for industrial manufacturing applications. With us, you are in the best hands – professional, reliable, and passionate about machinery! PS CNC Service Germany GmbH & Co. KG All information without guarantee.

Condition: good (used), Year of construction: 1995, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, x-travel 1000 mm y-travel 600 mm z-travel 600 mm Control: Heidenhain TNC 426 Spindle nose: 100–700 mm Work table: 1,080 x 580 mm Max. workpiece weight: 550 kg T-slots: 7 pcs. T-slot width: 14 mm Tool magazine with 36 positions Max. tool weight: 8 kg Fodpfx Acoyipwie Nofu Max. tool length: 340 mm Machine weight approx. 6.2 t Space requirement approx. 4,790 x 5,330 x 2,905 mm

Condition: good (used), Year of construction: 1999, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, Control: SIEMENS 840D x-travel: 2000 mm y-travel: 500 mm Fedpfsyipuzjx Ac Nofu z-travel: 500 mm feed: 1 - 8000 mm/min table size: 2120 x 550 mm table load: 2000 kp rapid traverse X-axis: 40 m/min rapid traverse Z-axis: 20 m/min tool taper: HSK 63 A spindle speeds - continuously variable: 0 - 15000 rpm spindle drive: 20 kW spindle bearing diameter: 70 mm position accuracy: 0.020 mm Control: SIEMENS 840D Tool diameter: 63 / 126 mm Tool magazine: Chain magazine: 40 pieces Total power requirement: 65 kVA Accessories: Chip conveyor

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, table load: 1,588 kg, overall weight: 6,623 kg, spindle speed (max.): 8,100 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3s HAAS VF5/40 vertical machining centre was manufactured in 2023. It features an impressive X-Axis travel of 1270 mm, Y-Axis travel of 660 mm, and Z-Axis travel of 635 mm, making it suitable for various machining tasks. With a spindle speed of 8100 rpm and a tool changer capacity of 20/24+1 stations, consider the opportunity to buy this HAAS VF5/40 vertical machining centre. Contact us for further details. • Table size: 1321 x 584 mm • Drive system: Inline direct-drive • Tool changer capacity: 20/24+1 stations • Rapid traverse (X/Y/Z): 18 m/min • Max cutting feed: 12.7 m/min Technical Specification Taper Size BT 40 Ffsdeyhcktjpfx Ac Neu

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 200 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 250 mm, controller manufacturer: EMCO, total height: 1,100 mm, table load: 10 kg, overall weight: 400 kg, spindle speed (max.): 5,000 rpm, spindle motor power: 1,100 W, tool weight: 700 g, product length (max.): 1,135 mm, number of axes: 3, This 3s EMCO Concept Mill 105 was manufactured in 2016. It features a maximum spindle speed of 5000 rpm and a spindle motor power of 1.1 kW, providing efficient machining capabilities. The machine has a table size of 420 × 125 mm and a maximum table load of 10 kg. If you are looking to get high-quality milling capabilities, consider the EMCO Concept Mill 105 vertical machining centre we have for sale. Contact us for further details. • Distance spindle nose to table: 95–245 mm • Table size: 420 × 125 mm • T-slots: 2 × 11 × 90 mm • Max spindle torque: 4.2 Nm • Rapid traverse (X/Y/Z): 5 m/min • Feed rate: 0–5 m/min • Max feed force X/Y: 2000 N • Max feed force Z: 2400 N • Positioning accuracy (X/Y/Z): 0.005 mm • Repeatability: 0.005 mm • Tool stations: 10 • Max tool diameter: 55 mm • Max tool length: 50 mm • Tool change time (T1–T2–T3): 9.7 / 5 / 7.5 s • Connected load: 1.4 kW Fsdpfsyhcfkjx Ac Nofu • Required air pressure: 6 bar

Condition: good (used), Year of construction: 2013, operating hours: 7,400 h, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 32 m/min, torque: 256 Nm, controller manufacturer: Siemens, controller model: 828D Shop Mill, spindle speed (max.): 10,000 rpm, operating hours of spindle: 7,400 h, coolant supply: 22 bar, number of slots in tool magazine: 30, Equipment: chip conveyor, rotational speed infinitely variable, - 10,000 rpm - Separate spindle cooling for constant temperature - Tool holder DIN ISO SK40 with air blow function - 30-position tool changer with double-arm gripper – tool change time 1.8 sec. - Thread cutting without compensation chuck - Roller guides - Coolant and compressed air gun - Screw-type chip conveyor - Coolant system - Compressed air cooling for dry machining - Electronic handwheel Ffjdpfx Acsyipc Es Neu - Workspace lighting