Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 412003, Year 2009 Fanuc MXP-100i 24-position tool magazine and chip conveyor Travels X / Y / Z: 1,020 / 600 / 600 mm Table dimensions: 1,120 × 600 mm Maximum table load: 800 kg Spindle taper: BT40 Bljdpfs Ahq Ifex Aknep Spindle speed: 8,000 rpm Automatic tool changer Rigid Meehanite cast iron frame Coolant system for the machining area Full protective enclosure Electronic handwheel Work light 3 clamping vises Installed electrical power: 25 kVA Weight: approximately 6,500 kg

Condition: good (used), Year of construction: 2007, HAAS VF-3BHE vertical machining center, 5-axis Year of manufacture: 2007 Specifications: Axis travel: X-1016mm, Y-508mm, Z-635mm Table: 1219 mm x 457mm Table load: 1814 kg Spindle taper: SK40 Spindle speed: 10000 rpm Distance from spindle nose to machine table: 107 - 742 mm Drive power: 22.4 kW Rapid traverse X/Y/Z = 24.5 m/min Tool changer capacity: 40 positions Weight: 6500 kg Dimensions LxWxH = 3400 x 2400 x 2600 mm Accessories/options: - 4/5 axis, TR210 rotary/tilting table - Renishaw OMP40 touch probe - Renishaw TS27 tool measuring unit - Swarf conveyor - Programmable coolant nozzle - Automatic door opening closing PLC possibility Bjdpfx As Ahn N Ujknslp - Tool holders with tools, 17 pieces - Coolant tank Run time: 12233 hours Tool changes: 208476 Under power in our warehouse, possible to test it anytime!

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 60 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 305 mm, total height: 2,704 mm, total length: 1,830 mm, total width: 3,029 mm, overall weight: 3,550 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 60 h, coolant supply: 30 bar, spindle motor power: 26,200 W, number of spindles: 1, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, Additional features: Lower table BBT30 tool holder Bledpfxe Ahhlze Aknop CTS 30 BAR 10,000 RPM high-torque spindle 40 tool positions Top cover Manual pulse generator Automatic door Area sensor Hydraulic rotary joint 4P + pneumatic relay box 12P Exio board input 32/output 32 + Profinet slave Spindle overdrive 2 magnetic plates Flaig + integrated control system 400x600 Renishaw T27R (2x) Chip conveyor Cromar 4th axis Kitigawa MR160L + support Corresponding fixtures + bolts (+/-25 pieces) Topsolid 7 post-processor

Condition: excellent (used), functionality: fully functional, machine/vehicle number: BJ9-002-042, travel distance X-axis: 560 mm, travel distance Y-axis: 355 mm, travel distance Z-axis: 355 mm, controller model: Hurco Ultimax, spindle speed (max.): 6,000 rpm, Equipment: documentation/manual, TECHNICAL DETAILS X-axis travel: approx. 560 mm Y-axis travel: approx. 355 mm Z-axis travel: approx. 355 mm Table length: approx. 760 mm Table width: approx. 355 mm Spindle speed: up to 6,000 rpm Tool holder: SK40 / CAT40 Main motor power: approx. 7.5–10 HP Tool positions: 16 Rapid traverse: approx. 10 m/min MACHINE DETAILS Bljdpfx Ao Afwwbeknop Control system: Hurco Ultimax Machine weight: approx. 3,200 kg EQUIPMENT 16-position tool changer Various accessories

Condition: used, Year of construction: 2008, operating hours: 3,096 h, functionality: fully functional, machine/vehicle number: 1069140, overall weight: 4,500 kg, spindle motor power: 14,900 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, HAAS VF-4BHE Vertical CNC Machining Center – 2008 We offer for sale a used HAAS VF-4BHE vertical CNC machining center, manufactured in 2008. Since its purchase, the machine has been used by a single group of companies, operating on one shift and primarily employed for machining aluminum. The machining center is in full working order, has no history of accidents, and is maintained in good operational condition. Technical specifications and equipment: - Manufacturer: HAAS - Model: VF-4BHE - Year of manufacture: 2008 Bjdpfxo Afypks Aknelp - Type: Vertical CNC machining center - Technical condition: fully operational - Servo drive operating time: 3,096 h - Motion time: 594 h - Spindle operating time: 656 h - Tool measurement: Renishaw tool sensor - Part probing: not available - Control software version: M16.10A Terms of sale: The seller does not provide machine loading services – the organization of loading and transportation is the responsibility of the buyer.

Condition: ready for operation (used), Year of construction: 2021, - USED - 3-AXIS BRIDGE-TYPE VERTICAL MACHINING CENTRE       X-AXIS TRAVEL: 3000 mm Y-AXIS TRAVEL: 2000 mm Z-AXIS TRAVEL: 1000 mm DISTANCE SPINDLE NOSE-TABLE: 350 - 1350 mm RAPID FEEDS X-Y-Z: 20 - 18 - 16 m/min SPINDLE: 6000 rpm; 30 kW; ISO 50 - DIN TABLE SIZE: 3000 x 1800 mm MAX ADMITTED LOAD: 10000 Kg HIGH PRESSURE COOLANT: 25 Bar TOOL MAGAZINE: CHAIN-TYPE ; 60 POS MAX TOOL DIAMETER: 125 mm MAX TOOL WEIGHT: 20 Kg CONTROL UNIT: HEIDENHAIN TNC 640 WEIGHT: 32706 Kg OVERALL DIMENSIONS: 9000 x 5290 x 5235 mm ACCESSORIES: SWARF CONVEYOR ; PAPER FILTER ; MAGNETIC FILTER ; TOOL SETTER ; LINEAR SCALES ; TOUCH PROBE ; Bledpjzbnrisfx Aknsp PORTABLE HANDWHEEL NOTE: MECHANICAL GEAR BOX

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 016-018271-450, travel distance X-axis: 600 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 580 mm, controller model: FANUC 0i-MD, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 600 mm Travel range, Y-axis: 530 mm Travel range, Z-axis: 580 mm Table area: 840 × 500 mm Maximum table load: 800 kg Drive power: 15 kW Spindle speed: 8,000 rpm Bodpfj Afxygsx Aknslp Tool positions: 20 Tool holder: BT 40 MACHINE DETAILS Control system: FANUC 0i-MD EQUIPMENT 20-position tool changer 80 tool holders BT 40

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 703 mm, travel distance Y-axis: 603 mm, travel distance Z-axis: 503 mm, controller manufacturer: Fanuc, controller model: 0i-MD, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, Equipment: chip conveyor, Table swivels +31.1° / -121.7° Table rotates 360° Bledpo Afw A Ujfx Aknjp Prepared for 3D probe

Condition: repair required (used), Year of construction: 1999, operating hours: 5,050 h, functionality: limited functionality, machine/vehicle number: 2885-0681, total height: 2,540 mm, total length: 1,900 mm, total width: 2,530 mm, Equipment: documentation/manual, Product CNC machining center Brand Deckel Maho Type DMC 63V Measurements WxDxH approx. 190x253x254 cm Year volgens opgave 1999 Specifications Serial number 2885-0681, operating hours: 5,050. Siemens control system. Please note: The circuit board is defective; a replacement part is included and is part of this lot. The machine has been disconnected from the power supply and all fluids have been drained. Details Please note! The buyer is responsible for providing Bljdpfx Aks Aguunenop lifting and hoisting equipment. Please note! The maximum floor load is 1,600 kilograms per square meter.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 480 mm, controller model: Heidenhain TNC 407, spindle speed (max.): 6,000 rpm, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 3,000 mm Y-axis travel: 420 mm Z-axis travel: 480 mm Blodpfj Afxrqex Aknsp Table length: approx. 3,000 mm Table width: approx. 500 mm Spindle speed: up to 6,000 rpm Tool holder: SK 40 Tool positions: 22 MACHINE DETAILS Control system: Heidenhain TNC 407 EQUIPMENT 22-position tool changer Coolant system Heavy-duty frame construction Additional angular/universal milling head 4/5-axis machining possible

Condition: used, Year of construction: 2016, operating hours: 26,882 h, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, overall weight: 7,800 kg, spindle speed (max.): 15,000 rpm, operating hours of spindle: 3,680 h, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, MTcut V110, 15th unit Year of manufacture: 2016 Heidenhain iTNC 530 control system Spindle speed up to 15,000 rpm 60-tool automatic tool changer, SK40 Internal coolant system, 20 bar Chip conveyor Bedpfozphdaox Aknelp Total operating hours: 26,882 Spindle operating hours: 3,106

Condition: used, Year of construction: 2000, overall weight: 12,000 kg, Used machining center from AXA Type VSC-1-4000-M/E ISO 40 tool holder Bedpfx Ake Ahnq Senslp X / Y / Z = 4000 / 550 / 600 Heidenhain TNC 430M CNC control 22-position tool changer Tools not included.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 9,020 h, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 24 m/min, controller manufacturer: FANUC, controller model: MXP-200FB, workpiece weight (max.): 800 kg, total height: 2,765 mm, total length: 3,650 mm, total width: 2,950 mm, table width: 600 mm, table length: 1,120 mm, table load: 800 kg, overall weight: 6,500 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 9,020 h, spindle motor power: 11,000 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, We acquired this machine in working condition from a production environment, and it has always been well-maintained. The machine is in excellent mechanical and visual condition and is currently set up and operational in our showroom! Additional options & accessories: - Chip conveyor - Internal cooling system (ICS) - 30-position tool changer (standard 20 positions) - Electronic handwheel - Air and coolant gun - All original documentation - Oil skimmer Blsdpfe Abkdwjx Aknep

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, spindle speed (max.): 12,000 rpm, distance table to spindle center: 150 mm, spindle nose: BT40, number of slots in tool magazine: 30, Equipment: chip conveyor, DNM 6700L from DN Solutions is CNC milling machine of medium dimensions, intended for both rough and fine processing. A powerful motor in combination with high rigidity and a high-precision base spindle enable large removals and precision. The machine is a suitable answer to a wide range of requirements in production, especially in toolmaking. The machine is sold as a set with the equipment described in the listing. Machine is is good condition and regularly maintained. -15 " display -2MB part program storage - 1000 programs - 12.000 RPM spindle 18,5kW, 118Nm -BT40 -30 tools magazine -12 bar through the spindle cooling -ball screw nut cooling -oil skimmer belt type -ethernet connection -coolant gun -tool breakage detection in magazine -automatic doors -robot interface -air clamp interface on the table -vacuum pump -seat air check Blodpfj Ahhuuox Aknep -level sensor for coolant liquid -LNS MH500 chip conveyor- right side -mist collector interface

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: w3-1200, CNC Vertical Machining Center VICTOR V-CENTER 85 – 2003 – High Pressure – Chip Conveyor For sale, a CNC vertical machining center, VICTOR V-CENTER 85, manufactured in 2003. A robust and versatile industrial machine designed for milling, drilling, tapping, and precision machining operations. Equipped with a high-pressure coolant pump and a chip conveyor, allowing for better chip removal and efficient cooling during machining. General Specifications Blsdpfx Ao Agvwljknep Brand: VICTOR Model: V-CENTER 85 Year of Manufacture: 2003 Type: CNC Vertical Machining Center Number of Axes: 3 Axis Travels X-axis Travel: 850 mm Y-axis Travel: 520 mm Z-axis Travel: 560 mm Work Table Table Dimensions: 1,100 × 510 mm Maximum Permissible Load: 750 to 1,000 kg Spindle Spindle Taper: BT40 Maximum Speed: 8,000 rpm Motor Power: 5.5 / 7.5 kW Tool Magazine Capacity: Up to 24 tools Tool Change: Automatic Equipment and Options High-pressure coolant pump Chip conveyor Coolant system for cooling tools and workpieces Automatic tool changer Dimensions and Weight Length: Approximately 2,450 mm Width: Approximately 2,400 mm Height: Approximately 2,640 mm Weight: Approximately 5,950 kg Dimensions and weight are approximate and may vary depending on the version and installed equipment. The footprint of the chip conveyor should be verified separately. Additional Information Machine can be viewed by appointment in Sprimont, Belgium. Price indicated excludes VAT – VAT is recoverable according to applicable conditions. For further information or to arrange a visit:

Condition: ready for operation (used), Year of construction: 2017, operating hours: 14,046 h, functionality: fully functional, machine/vehicle number: 1527000284A, total height: 2,810 mm, total length: 4,050 mm, total width: 2,810 mm, overall weight: 5,830 kg, Equipment: documentation/manual, Product CNC machining center Brand DMG Mori Type Blodpfs Agu Anox Aknep CMX 1100V Measurements LxWxH approx. 405x281x281 cm Year 2017 Specifications Serial number 1527000284A, recorded operating hours 14,046, recorded spindle hours 4,395, net weight approx. 5,830 kilograms , 12,000 RPM, spindle-cooled, block guide, Renishaw measuring system, Siemens control. The machine has been disconnected from the power supply and all fluids have been drained . Excludes precision tool holders; includes probe. Details Please note! The buyer is responsible for providing lifting and hoisting equipment. Please note! The maximum floor load is 1,600 kilograms per square meter.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 15,396 h, functionality: fully functional, machine/vehicle number: 1527000168A, total height: 28,100 mm, total length: 4,050 mm, total width: 2,800 mm, overall weight: 5,830 kg, Equipment: documentation/manual, CNC machining center Brand DMG Mori Bjde Agunljpfx Aknolp Type CMX 1100V Measurements L x W x H approx. 405 x 280 x 281 cm Year 2017 Specifications Serial number 1527000168A, recorded operating hours: 15,396, recorded spindle hours: 5,102, net weight approx. 5,830 kilograms , 12,000 RPM, spindle-cooled, block guide, Renishaw measuring system, Siemens control. The machine has been disconnected from the power supply and all fluids have been drained . Excludes precision tool holders; includes probe. Details Please note! The buyer is responsible for providing lifting and hoisting equipment. Please note! The maximum floor load is 1,600 kilograms per square meter.

Condition: used, Year of construction: 2003, travel distance X-axis: 1,600 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 900 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, overall weight: 18,500 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 30, Machining Center - Vertical Manufacturer: MIKRON Model: VCE 1600 PRO Year of manufacture: 2003 Control system: Heidenhain iTNC 530 Technical specifications: X-axis: 1,600 mm Y-axis: 900 mm Z-axis: 900 mm Spindle speed: 10,000 rpm Number of tool stations: 30 Machine weight: approx. 18,500 kg Condition: Used Technical features & accessories: - 2 rear-mounted chip conveyors, integrated into the machine - Oil cooler - Coolant filtration system Accessories, tools, and clamping devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; Bjdpo Ahrm Djfx Aknjlp prior sale reserved!

Condition: excellent (used), Year of construction: 2015, operating hours: 6,000 h, functionality: fully functional, TOP CONDITION Blsdpfs Afi Rwsx Aknop

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, controller manufacturer: HEIDENHAIN, controller model: TNC-620, workpiece weight (max.): 1,300 kg, total height: 3,100 mm, total length: 4,400 mm, total width: 2,450 mm, table width: 670 mm, table length: 1,600 mm, overall weight: 9,000 kg, spindle speed (min.): 80 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 775 mm, spindle nose: ISO 40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, Used 3-axis vertical machining center with Heidenhain TNC-620 CNC Blodpfxs Afpq Rj Aknop

Condition: used, Year of construction: 1999, functionality: fully functional, travel distance X-axis: 2,030 mm, travel distance Y-axis: 810 mm, travel distance Z-axis: 810 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, torque: 650 Nm, controller manufacturer: Heidenhain, controller model: TNC 426, workpiece length (max.): 2,030 mm, workpiece width (max.): 810 mm, workpiece height (max.): 450 mm, workpiece weight (max.): 2,010 kg, total length: 4,820 mm, total width: 2,440 mm, table load: 2,010 kg, rotational speed (min.): 1,500 rpm, overall weight: 11,600 kg, spindle motor power: 17,000 W, number of spindles: 1, number of slots in tool magazine: 16, Equipment: documentation/manual, An inspection can be arranged in Atzelgift by prior appointment. The machine is available immediately. Net selling price plus applicable VAT. If you have any questions or are interested in receiving further information, please do not hesitate to contact us. Please contact us to arrange an inspection appointment. Blsdpj Af Uvkofx Aknop

Condition: used, Year of construction: 2020, functionality: fully functional, travel distance X-axis: 3,150 mm, travel distance Y-axis: 2,300 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 6,000 rpm, spindle nose: BT50, WELE SB316YZ YEAR 2020 BT50 SPINDLE 6000 RMM WITH GEAR BOX TABLE 3100-1450 MOVEMENT 3150-2300-1000+200 Blodpfs Ahfdvjx Aknjp DISTANCE BETWEEN COLUMN 1700 X Y AND Z AXIS HAVE OPTIC SCALE X Y AND Z ROLLER TYPE LINEER MANUEL UNIERSAL SPINDLE HEAD TOLL MAGAZINE 32 LOCATION EUROPE SIDE OF ISTANBUL CAN BE CHECKED UNDER POWER

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Machine is fully functional. Blsdpfj Agik Nex Aknep

Condition: good (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 1,016 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 760 mm, overall weight: 6,700 kg, Milling machine, type ZPS MCFV 1060NT P4700, in good condition, for sale. Bljdpfx Ao Ahkamsknep The machine is ready for immediate use. The spindle bearings were replaced 3-4 years ago. Includes chip conveyor, tool changer, coolant pump, and high-speed spindle (see photo). - X-axis travel: 1016 mm - Y-axis travel: 610 mm - Z-axis travel: 760 mm - Original positioning accuracy: 0.008 mm - Table surface: 1270x590 mm - Max. load: 900 kg - Max. spindle speed: 8,000 rpm - Magazine capacity: 24 tools Loading will be handled by us using a crane or forklift. Export documents can be provided. Our general terms and conditions apply. Please feel free to contact us if you have any questions.

Condition: good (used), Year of construction: 2006, Ref. -No.: 10651 Manufacturer: CHIRON Type: Mill 2000 Year of construction: 2006 Type of control: CNC Control: SIEMENS SINUMERIK 840 D - Safety Integrated Storage location: Halberstadt Country of origin: Germany Machine-No.: 498-XX X-Travel: 2000 mm Y-Travel: 500 mm Z-Travel: 640 mm Total Power Requirement: 29 kW Weight Of The Machine Ca.: 9,6 t Further information: 3-axis machining center equipped with a Siemens CNC control system and a 40-position tool magazine. The machine allows pendulum operation on two separate machining areas. Bodpfx As Ahkyaoknslp Tool Interface: SK40 Working Area: X-axis: 2,000 mm (can be divided into 2 × 850 mm) Y-axis: 500 mm Z-axis: 640 mm Equipment: Screw chip conveyor with discharge to the left side Stand-alone Knoll coolant system for tool coolant supply and machine sump flushing The machine can be inspected under power.