Condition: ready for operation (used), Year of construction: 2005, operating hours: 10,327 h, travel distance X-axis: 600 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 520 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 3,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 4-axis HEDELIUS RS 60 K - 2000 was manufactured in 2005. It features a generous X-axis travel of 2000 mm, Y-axis travel of 620 mm, and Z-axis travel of 520 mm. The machine can accommodate a maximum workpiece weight of 1000 kg on the fixed table. If you are looking to get high-quality machining capabilities, consider the HEDELIUS RS 60 K - 2000 vertical machining centre we have for sale. Contact us for further details. • Travels (fixed machine table area) X2/X/Z: 775 / 620 / 520 mm • Spindle nose-to-table distance: 100–620 mm • Max. workpiece weight: rotary/tilting table 300 kg; fixed table 1000 kg • Main spindle: Diebold MSG-E205.15-15AK4 • Axis drives (X/Y/Z): Siemens 1FT6082 // IMB 25 // 4.1 kW // 3,000 rpm // IP54 • Internal cooling: Yes, internal coolant system installed • Prepared for automatic clamping: Yes • Spindle run time: 10,327:19:09 • Condition: Used, not functional Additional equipment • Heidenhain HR410/3+ handheld control unit • 350-liter screen filter system with 20 bar internal coolant • Scraper floor conveyor (chip conveyor) • Partition wall for pendulum machining • 2x blow-off guns • Cleaning gun (3 bar, 20 l/min) • Touch probe preparation: Renishaw RMP60 receiver installed; touch probe itself is not included Hfedpsyudiwefx Ahvod • Robot interface • Oil mist extraction • Machine hood • Laser for tool measurement

Condition: good (used), Year of construction: 2010, operating hours: 33,600 h, functionality: fully functional, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: Siemens, controller model: Siemens 810D / ShopMill, table width: 560 mm, table length: 1,200 mm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 11,000 h, Equipment: chip conveyor, Internal coolant supply (IKZ) Control cabinet cooling: Rittal SK 33023.100 Hsdeyua Sbopfx Ahvefd Tool magazine: 20 positions

Condition: ready for operation (used), travel distance Z-axis: 635 mm, feed length X-axis: 1,060 mm, feed length Y-axis: 510 mm, controller manufacturer: Fanuc 21i-MB, total height: 2,800 mm, total length: 3,000 mm, total width: 2,400 mm, empty load weight: 7,000 kg, rotational speed of tool magazine (max.): 10,000 rpm, met koeling door spindel Hsdpfx Ahjyt S T Uovefd met spaantransportband met Kitagawa 4e as Table dimensions: 1200 x 500 mm Admission in spindle (ISO): BT 40 Power on the spindle: 15 kW Toolchanger: yes Number of toolholders: 30 positions

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 1,150 mm, travel distance Y-axis: 640 mm, travel distance Z-axis: 660 mm, rapid traverse X-axis: 33 m/min, overall weight: 7,400 kg, spindle speed (max.): 11,000 rpm, number of slots in tool magazine: 28, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The used and REFURBISHED AKIRA SEIKI 4.5 XP vertical machining center is a 3-axis continuous CNC machining center suitable for small/medium-sized parts. It features a 1300×600 mm table, travel: X 1,150 mm, Y 640 mm, Z 660 mm. Year of manufacture: 2017. CE compliant, equipped with FANUC 0i-MF CNC, rapid feedrates at 33 m/min and working feedrates at 12 m/min, weight 7,400 kg. Hedpfjyt Sansx Ahvjfd Fitted with a 40-taper milling spindle, 11,000 rpm, 27 HP, refrigerated by dedicated chiller, belt-type chip conveyor, high-pressure through-spindle coolant system, random tool changer with 28 positions, USB port, memory card slot, RJ45 Ethernet network port. The machine has been refurbished, including axes and a brand new complete spindle line, with 0 working hours. FULLY OPERATIONAL!

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 1,626 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, controller manufacturer: HAAS, table width: 711 mm, table length: 1,626 mm, table load: 1,814 kg, overall weight: 10,887 kg, spindle speed (max.): 12,000 rpm, tool weight: 5,400 g, number of axes: 3, This 3-axis HAAS VM-6 was manufactured in 2024. It features a spindle speed of 12,000 rpm and a robust table size of 1,626 x 711 mm, with a maximum weight capacity of 1,814 kg. The machine includes a tool changer capacity of 30+1 and a rapid traverse rate of 15.2 m/min. If you are looking to get high-quality machining capabilities, consider the HAAS VM-6 vertical machining centre we have for sale. Contact us for further details. • Spindle nose to table: max 864 mm (34.0 in), min 102 mm (4.0 in) • Spindle • Max torque: 122.0 Nm @ 2000 rpm (90.0 ft-lbf) • Drive system: Inline direct-drive • Taper: CT40 | BT40 | HSK-A63 • Lubrication: Air/oil injection • Cooling: Liquid cooled • Table • Length: 1626 mm (64.0 in) • Width: 711 mm (28.0 in) • T-slot width: 15.90–16.00 mm (0.626–0.630 in) • T-slot center distance: 125 mm (4.92 in) • Max weight on table: 1814 kg (4000 lb) • Feedrates and thrust • Max cutting feedrate: 12.7 m/min (500 ipm) • Rapids (X/Y/Z): 15.2 m/min (600 ipm) • Max thrust X: 15,124 N (3400 lbf) • Max thrust Y: 18,238 N (4100 lbf) • Max thrust Z: 24,910 N (5600 lbf) • Tool changer • Type: SMTC (side-mount) • Capacity: 30+1 • Max tool diameter (full): 64 mm (2.5 in) • Max tool diameter (adjacent empty): 127 mm (5.0 in) • Max tool length: 406 mm (16 in) • Tool-to-tool time (avg): 2.80 s • Chip-to-chip time (avg): 3.60 s • Utilities • Coolant capacity: 360 L (95 gal) • Air required: 113 L/min @ 6.9 bar (4 scfm @ 100 psi) • Minimum air pressure: 5.5 bar (80 psi) Hodpfx Ajyt Riushvjfd • Electrical • Input AC voltage (3-phase) low: 220 VAC, full load amps: 70 A • Input AC voltage (3-phase) high: 440 VAC, full load amps: 35 A Technical Specification Taper Size ISO 40

Condition: excellent (used), Year of construction: 2017, Traverses X Y Z; 1020 x 610 x 610mm, Table size 1200 x 600mm, Table load 700Kgs, Hodpfx Ahsyt Rfvjvofd Table to spindle 100-710mm Spindle taper BT40, Spindle speed 12,000rpm, spindle motor 18.5KW, 30 station ATC, Heidenhain TNC640, through spindle coolant, swarf conveyor

Condition: ready for operation (used), Year of construction: 2013, operating hours: 31,460 h, travel distance X-axis: 935 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 650 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530 HSCI, table load: 1,500 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 60, number of axes: 5, This 5-axis DMG MORI DMU 85 monoBLOCK was manufactured in 2013. It features an impressive X-axis travel of 935 mm, Y-axis travel of 850 mm, and Z-axis travel of 650 mm. The machine includes a robust table size of 1,040 mm and a maximum table load of 1,500 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 85 monoBLOCK vertical machining centre we have for sale. Contact us for further details. • Max feedrate: 40,000 mm/min • Table size: Ø 1,040 mm • Through-spindle coolant: 20 bar • Operating mode 4: machining process control (work with open work area door allowed) • Repairs/maintenance: • C-axis seal replaced just after warranty (improved version) • Spindle replaced (05/2021) • Machine measured last year – circular interpolation (Ballbar) within tolerance • Typical use: • Duralumin machining 80% overall • 3-axis: 50% • 5-axis: 40% (up to 10% 5-axis continuous) Hsdpfx Ahoyt Rdrovofd Additional equipment • Measuring probe: TS649 • Tool probe: Blum Laser • 3D quickSET • Electric handwheel • Rinsing gun • Chip conveyor Technical Specification Taper Size HSK 63

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 200 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 280 mm, table load: 100 kg, spindle speed (max.): 42,000 rpm, number of axes: 3, This 5-axis DMG MORI HSC 20 was manufactured in 2019. It features a maximum spindle speed of 42,000 rpm and a clamping surface of 450 × 400 mm. The integrated tilting rotary table allows for a tilt range of -15° to +130°, enhancing its versatility. If you are looking to get high-quality machining capabilities, consider the DMG MORI HSC 20 vertical machining centre we have for sale. Contact us for further details. • Fixed table with T-slots • Clamping surface: 450 × 400 mm • Spindle interface: HSK-E32 • Spindle torque: 6 Nm (S1 100%), 7.5 Nm (S6 40%) • Automatic tool changer, pickup system • Tool magazine capacity: 24 tools (HSK-32) or 22 tools (HSK-40) • Air blow through spindle axis • Ethernet interface ready Hfodpfeyt Nxzjx Ahvod • CELOS control system with Siemens 840D sl Operate • 21.5” ERGOline touchscreen control panel • CAD/CAM connectivity • Compatible with PPS/ERP systems • 5-axis precision package • Integrated tilting rotary table • A-axis tilt range: -15° to +130° • C-axis rotary table diameter: Ø250 mm • C-axis integrated torque motor • Maximum rotary speed: 50 rpm • 4-color machine status signal lamp • Remote diagnostic capability (DMG MORI NETSERVICE) • IoT connectivity (DMG MORI IoTconnector) • Remote service monitoring (Service Agent) • Machine installation and commissioning included • 3D STEP model for CAD integration • Permanent lubricated spindle Additional equipment • Automatic pallet/part handling automation PH10 • Linear magazine automation system • Pallet capacity: up to 132 positions (ITS 50) or 66 positions (ITS 115) • Maximum workpiece height (automation): 260 mm • Machine transport lifting device • Machine packaged for truck transport

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 13 m/min, rapid traverse Y-axis: 13 m/min, rapid traverse Z-axis: 13 m/min, feed length X-axis: 5,000 mm, feed length Y-axis: 5,000 mm, feed length Z-axis: 5,000 mm, spindle speed (max.): 7,500 rpm, VERTICAL MACHINING CENTER MIKRON VCE 750 TRAVELS 760X400X500 SPINDLE ISO 40, 7500 RPM Hfedoyt Il Hspfx Ahvjd TOOL CHANGER WITH 20 POSITIONS

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 4,200 mm, travel distance Y-axis: 485 mm, travel distance Z-axis: 340 mm, total height: 2,000 mm, total width: 1,600 mm, overall weight: 5,500 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 6,000 W, product length (max.): 7,500 mm, number of axes: 3, This 3-axis Elumatec SBZ 131 was manufactured in 2010. It features an impressive X-axis travel of 4200 mm, Y-axis travel of 485 mm, and Z-axis travel of 340 mm. The machine includes an 8-position rotating tool head and a maximum spindle speed of 6000 rpm. If you are looking to get high-quality profile machining capabilities, consider the Elumatec SBZ 131 CNC profile machining centre we have for sale. Contact us for further details. • Control: Industrial PC with eluCam software; 15" colour monitor • Turret/tooling: 8-position rotating turret head with 8-position tool changer • Rapid traverse: X 60 m/min; Y 30 m/min; Z 30 m/min • Tool interface: BT30 • Collet systems: ER25 / ER32 • Saw blade diameter: approx. 300–420 mm Hfsdpfx Asyt Ifyehved Technical Specification Taper Size BT 30

Condition: excellent (used), Year of construction: 2022, DMG MORI CMX 50 U 3+2, year 2022. Siemens SlimLine control. Travels: X-500 mm, Y-450 mm, Z-400 mm, B -5 / +110°, C 360°. Spindle max 15,000 rpm. Tool magazine for 60 tools, BBT40. Through-spindle cooling 70 bar. Chip conveyor. Filter paper. High-pressure coolant pumps. Workpiece probe, tool probe. Quickset (rotary axis calibration). Machine in very good condition, available at our warehouse in France, 01360 Loyettes. Full specification below in PDF. Hfsdpfx Ajxyi Hwehvod

Condition: excellent (used), Year of construction: 2008, travel distance X-axis: 800 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 540 mm, feed rate X-axis: 36,000 m/min, feed rate Y-axis: 36,000 m/min, feed rate Z-axis: 36,000 m/min, total height: 2,570 mm, total length: 2,995 mm, total width: 2,190 mm, table width: 540 mm, table length: 900 mm, table load: 700 kg, rotational speed (min.): 8,000 rpm, GX- Performance VMC's Dr HeidenHain iTNC530 with HR 410 Handwheel  Coolant system Rigid sructure and superior reliability Central lubrication X - Travel: 800mm Y - Travel: 540mm Z - Travel: 540mm Hfedpfxoyt Hnaj Ahvjd Table Length: 900mm Table Width: 540mm Table load: 700 Feed rate X-Axis: 36000mm/min. Feed rate Y-Axis: 36000mm/min. Feed rate Z-Axis: 36000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 13kW Speeds / ranges: 8000Rpm ATC / revolver: 20 Number of controlled axis:3 Chip conveyor: Yes Coolantsystem: Yes Length: 2995mm Width: 2190mm Height: 2570mm Weight: 4900kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2016, Table size 3000 x 1700mm, Traverses X Y Z 3200 x 2100 x 920mm, Table load 11,000kgs, spindle nose to table 164 – 1084 mm, Hfjdpfx Ahswu Dlasved spindle bored Din 50, spindle speed 6000 rpm, 40 station ATC, Hurco Winmax 5 control. swarf conveyor

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 4,200 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, overall weight: 9,000 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 5,500 W, number of axes: 3, This 3-axis Elumatec SBZ 130 was manufactured in 2007. It features a maximum machining length of approximately 4200 mm and a robust Y-axis travel of 400 mm. The high-speed milling spindle operates at a maximum speed of 6000 rpm, supported by an 8-position turret head tool changer. If you are looking to get high-quality profile machining capabilities, consider the Elumatec SBZ 130 CNC profile machining centre we have for sale. Contact us for further details. Hfodpfx Ahsyt Hg Njved • Control system: Ferrocontrol CNC • Max. machining length: approx. 4200 mm • Machining length with end machining: approx. 4080 mm • Spindle: • Type: High-speed milling spindle • Tool system: • Tool changer: Turret head • Tool positions: 8

Condition: good (used), Year of construction: 2018, Traverses X Y Z: 1270 x 508 x 635mm, Hfedpfxeyt Hf Ss Ahved Spindle nose to Table: 102 – 737mm, Table 1324 x 457mm, Spindle speed 7500 rpm, Spindle taper BT40, Spindle Motor 40Hp, HAAS Control, 20 Station ATC, Programmable Coolant nozzle, swarf auger, Low Volt light

Condition: good (used), Year of construction: 2015, Table size 320mm, Traverses X Y Z 400 x 560 x 400mm, A axis +120/-30 degrees, C axis 360 degrees, Spindle speed 12,000 rpm, spindle taper BT40 24 station ATC, Siemens 828 control, Hodpfx Asyt Hd Ishvsfd swarf conveyor

Condition: good (used), Year of construction: 2014, Traverses X Y Z ; 1100mm x 610mm x 610mm. Table size 1270mm x 640mm, table load 1200kgs. Hodpfx Ahjyt Hcksvjfd Spindle taper BT50, spindle speed 10,000rpm. 30 station toolchanger, Fanuc Oi-MD

Condition: good (used), Year of construction: 2018, Traverses X Y Z: 762 x 305 x 406mm, Table 1213 x 267mm, Spindle speed 6,000 rpm, Spindle taper BT40, Spindle Motor 5.6Kw Hp, 10 station toolchanger, Hedpfeyt Hbtjx Ahvefd HAAS Control, low volt light, coolant

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 508 x 406 x 356mm, Table 1016 x 353mm, Spindle taper BT40, Hfsdpfsyt Hbgjx Ahved 20Hp spindle motor, Spindle Speed 6000rpm, HAAS Control, 20 Station ATC, Coolant

Condition: like new (used), Year of construction: 2021, Traverses X Y Z: 710 x 400 x 430mm, Hedpoyt E Uxjfx Ahvofd Table 800 x 400mm, table load 300kgs, Spindle speed 12,000rpm, Spindle taper CAT40, 5.5kW Spindle motor, FANUC Oi , 20 Station ATC, Coolant, Low Volt light, swarf conveyor

Condition: used, Year of construction: 2019, x-travel 2.000 mm y-travel 820 mm z-travel 720 mm Control Mazatrol Smooth G spindle taper SK 40 spindle turning speed range 35 - 12.000 U/min spindle motor 22 kW distance spindle centre table top edge 140 - 860 mm table load 1700 Kg rapid travel x/y/z 50 m/min table width 820 mm table length 2500 mm table height over floor 870 mm T-slots 7 T-slot - width 18 mm T-slot - distance 100 mm tool change unit 48 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 130 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 260 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 450 l high-performance coolant system 25 bar total power requirement 46,7 kW weight of the machine ca. 14,8 t dimensions of the machine ca. 4,3 x 3,6 x 3,1 m STANDARD ACCESSORIES Hfodpfx Ahjtuggcovjd Transformer for the European market USB port (1 port) Mazak standard colour Spindle speed 12,000 min-1 (steep taper 40) Work area lighting SAFETY DEVICES Operator door with locking switch Work area panelling The splash guard encloses the working area from the side. Fully enclosed work area Protection against chips, coolant and access to the work area during automatic machining. Safety precautions in accordance with global standards COOLANT SUPPLY Coolant supply through spindle (pressure at the pump = 5 bar) Complete coolant system includes pumps, valves, pipework and nozzles for the efficient production of quality components. FACTORY AUTOMATION Automatic switch on/off and warm-up function Automatic switch-on of a warm-up cycle via digital timer MEASUREMENT SYSTEM Tool length measurement and tool breakage detection CHIP DISPOSAL Factory preparation for chip conveyor (left) NUMERICAL CONTROL Fixed control/operating unit Relocation Detector Mazatrol SmoothG control unit 19" LCD colour screen (touch screen) Mazak tapping/drilling cycle Tornado (Mazatrol) By drilling and tapping in helical machining mode, a wide range of diameters a wide range of diameters can be machined at high speed with a wide range of diameters can be machined at high speed with just one tool. This function minimises programming and machining times. EIA/ISO input function Tool path check in the background The tool path of a programme can be checked even if another programme number is programme number is called up and processed in automatic mode. 3D coordinate conversion Shape compensation for rotating axes Mazacc 2D software (contour correction) Accuracy is maintained at high feed rates. Mazacc-3D software package for high-speed machining High-speed and high-accuracy machining for contours defined in the finest programme contours defined in the finest programme increments. MAZACC-3D high-speed software package (NO456) is additionally required. Control with high smoothing Interface for LAN SD Memory Card I/F Smooth standard software for M/C - NO443 B) MAZACC-2D software (workpiece shape compensation) - NO444 D) MAZACC-3D high-speed software package - NO445 B) Shape compensation for rotating axes - NO497 D) High accuracy control for finishing operations - Seamless corner point control - Variable acceleration control - Ultra high speed machining mode - NO498 Rapid traverse paths Rounding function Absolute positioning system Machine incl. the f...

Condition: used, Year of construction: 2006, x-travel 1.100 mm y-travel 600 mm Hfodpfx Ahjytybysvjd z-travel 560 mm Control Heidenhain iTNC 530 spindle tunring speed 12.000 U/min tool taper SK 40 number of tool places 40 Pos. weight of the machine ca. 7,4 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Chip conveyor - 4th axis preparation - Internal coolant supply Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, MIKRON HSM 800 ProdMod is a Vertical machining center engineered for precision, high accuracy and reliability. Working capacities: table 900×600 mm, max table load 800 kg; travels X800 × Y600 × Z500 mm. Main specs: spindle motor 12.5/22 kW, total power 26 kW, 3x 400 V 50 Hz, noise 75 dB(A), machine weight ≈8300 kg, dimensions L4000×W3700×H2500 mm. Equipment: 50‑position tool magazine (tool Ø max 75 mm, length 210 mm, max tool weight 2.5 kg). Delivers tight tolerances; typical applications: automotive, aerospace, medical, machine tools and watchmaking. Hsdpfxjytu Hkj Ahvjfd

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,000 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 660 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 530, table load: 700 kg, overall weight: 12,000 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 15,000 W, number of axes: 4, This 4-axis WEMAS VZ 1000 vertical machining center was manufactured in 2007. It features an X-axis travel of 1000 mm, Y-axis travel of 610 mm, and Z-axis travel of 660 mm. The machine includes a robust table size of 1300 x 600 mm and a maximum table load of 700 kg. If you are looking to get high-quality machining capabilities, consider the WEMAS VZ 1000 machine we have for sale. Contact us for further details. • Axes: 3 linear axes (X/Y/Z); 4th axis available via rotary table — see Additional equipment • Electrical data: 35 kVA, 400 V, 3 + PE Hfjdpfx Aheyttutoved • Table size: 1300 × 600 mm • Tool changer: Swing-arm ATC, 20 tools Additional equipment • 4th-axis rotary table (mounted on the table) • Through-spindle coolant (CTS) • Tool measurement probe: Renishaw TS27R • Chip conveyor Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 950 mm, controller manufacturer: FANUC, controller model: Series 31i, table width: 1,050 mm, table length: 4,100 mm, overall weight: 22,500 kg, spindle speed (max.): 3,500 rpm, number of slots in tool magazine: 24, number of axes: 3, This EUMACH FBE-4000 Vertical Machining center was manufactured in the year 2013 in Taiwan. It is equipped with a Fanuc Series 31i control unit and has 3 axis. The machine has a spindle speed of 3500 rpm. Hfsdpfxeyttffs Ahvod Machine Benefits Qualitative Machine Benefits • Very good condition! Technical Machine Benefits • Spindle motor power 22/26kw