Condition: excellent (used), Year of construction: 2022, operating hours: 1,316 h, DMG Mori M1 milling machine (version with 12,000 rpm). Year of manufacture: 2022. Very good condition, inspected by DMG service. Low operating hours, only 1,316 spindle running hours. The machine can be connected and tested on-site. Fpsdpfozr Rugsx Akvek

Condition: good (used), Year of construction: 2008, Working hours: - Power on: 44113 - Spindle hours: 13284 Fedpfozquqijx Akvjpk Equipped with: * CNC control SIEMENS 810 D powerline * 20-station ATC * Coolant equipment * Chip conveyor x-travel 1035 mm y-travel 560 mm z-travel 510 mm table surface area 1200 x 560 mm table load 1000 kg tool taper SK 40 spindle turning speed - stepless 20 - 8000 rpm feeds longditudinal/cross/vertical - 20000 mm/min rapid traverse 25 m/min spindle drive motor 13 kW dimensions of machine 2,6 x 2,6 x 2,7 m weight of the machine approx. 4,1 t

Condition: ready for operation (used), Year of construction: 2016, operating hours: 152 h, functionality: fully functional, machine/vehicle number: 665182, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel distances Travel distance X-axis: 650 mm Travel distance Y-axis: 550 mm Travel distance Z-axis: 500 mm Feed rates Feed rate X-axis: 30 m/min Feed rate Y-axis: 30 m/min Feed rate Z-axis: 30 m/min Spindle Spindle interface: HSK-E 40 Fpsdpfx Akjzquqcjvsk Spindle speed: 42,000 rpm Spindle running time: 151 h 20 min 08 s Spindle replacement: 2025 Cost of spindle replacement: approx. EUR 40,000 Tool magazine Number of tool slots: 40 Pallet system Pallet dimensions: approx. 320 × 320 mm Pallet clamping: Rotary table MACHINE DETAILS Machine type: CNC machining center Manufacturer: OPS INGERSOLL Model: SPEED HAWK 650 Year of construction: 2016 Electrical connection data Mains voltage: 400 V Mains frequency: 50 Hz Control voltage: 24 V DC Maximum fuse rating: 63 A Connected power: 38 kVA Dimensions and weight Overall height: 2,850 mm Overall length: 3,300 mm Overall width: 2,400 mm Machine weight: 9,000 kg EQUIPMENT Technical documentation Manual HSK-E 40 tool holders 3 pallets

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 10,000 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, No minimum price – guaranteed sale to the highest bidder! Bidding obligates the winner to pick up the machine between September 21st and October 1st! TECHNICAL DETAILS Travel range, X-axis: 550 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 450 mm Travel range, B-axis: -110 to +110° Travel range, C-axis: 360° Distance from pallet surface to spindle center: -20 to 430 mm Distance from B-axis center to spindle center: -40 to 410 mm Distance from B-axis center to spindle center: -20 mm Distance from pallet center to Z zero point: 265 mm Distance from pallet center to Y zero point: 180 mm Pallet Work area on the pallet: Ø 130 mm Pallet load capacity: 40 kg Max. workpiece size: Ø 250 × 250 mm Pallet mounting surface: 4 × M12 × 1.75 Distance from pallet bottom to pallet surface: 970 mm Pallet indexing, B/C-axis: 0.001° / 0.001° Pallet change time, B-axis: 1.2 s/90° Pallet change time, C-axis: 0.9 s/90° Pallet change time, C-axis: 1.2 s/180° Pallet change time, C-axis: 1.4 s/270° Pallet torque, B-axis: 1,070 Nm Pallet torque, C-axis: 192 Nm Pallet braking torque, B-axis: 1,112 Nm Pallet braking torque, C-axis: 500 Nm Spindle Spindle speed: 50 to 15,000 rpm Fpjdpfx Akszqunhovok Spindle speed change: 5-digit direct S-command Tool interface: SK 40 Spindle taper: 7/24, Taper No. 40 Spindle bearing inner diameter: 70 mm Max. spindle torque: 65.1 Nm at 1,100 min⁻¹ Spindle air blow: Standard Spindle orientation: Standard Tool clamping force: 7.0 kN Tool Changer Tool magazine capacity: 240 positions Tool shank: JIS B 6339, tool shank 40T Pull stud type: JIS B 6339, pull stud 40P Max. tool diameter: 80 mm Max. tool diameter with free auxiliary stations: 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Tool selection: Fixed address system Tool change arm: W-gripper type Feed Rates Rapid traverse rate, X/Y/Z-axis: 50 m/min Rapid traverse rate, B-axis: 30 min⁻¹ Rapid traverse rate, C-axis: 50 min⁻¹ Feed rate, X/Y/Z-axis: 1 to 50 m/min Feed rate, B-axis: 30 min⁻¹ Feed rate, C-axis: 50 min⁻¹ Rapid traverse acceleration, X/Y/Z-axis: 0.6 G Rapid traverse acceleration, B/C-axis: 2,500 / 2,000 °/s² Max. acceleration during cutting feed, X/Y/Z-axis: 0.4 G Max. acceleration during cutting feed, B/C-axis: 2,000 / 4,000 °/s² Tipping feed rate, X/Y/Z-axis: 0 to 4000 mm/min Tipping feed rate, B/C-axis: 0 to 11.11 min⁻¹ Min. movement increment, X/Y/Z-axis: 0.001 mm Min. movement increment, B/C-axis: 0.001° MACHINE DETAILS Control: MATSUURA G-TECH 840 DI Serial number: 350536 Electrical Connection Values Rated apparent power: 36 kVA Input voltage: 415 V Input frequency: 50 Hz Input current: 50 A Dimensions and Weight Overall length: 6,000 mm Overall width: 5,000 mm Overall height: 3,500 mm Overall weight: 15,000 kg EQUIPMENT - Chip conveyor - Coolant system - Tool holders on the tool changer External Reference: Hanon - Lot 1

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 135001, travel distance X-axis: 1,350 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine on time between September 21st and October 1st! TECHNICAL DETAILS Travel in X-axis: 1,350 mm Travel in Y-axis: 620 mm Travel in Z-axis: 810 mm Feed rate and rapid traverse Feed rate X/Y/Z-axis: 15 m/min Rapid traverse X/Y/Z-axis: 30 m/min Spindle Spindle speed: 12,000 rpm Spindle drive power: 10 kW (100% ED) Spindle drive power: 12 kW (40% ED) Spindle mounting: ISO 40 Spindle bearing diameter (front): 70 mm Spindle bearing diameter (rear): 60 mm Spindle operating hours: 6,510 h Distance from spindle to table: 90 – 900 mm Distance from spindle center to machine frame: 655 mm Tool magazine Tool magazine capacity: 40 Max. tool length: 300 mm Max. tool diameter with occupied neighboring positions: 80 mm Max. tool diameter with free neighboring position: 125 mm Work table Table length: 1,550 mm Table width: 620 mm Number of table slots: 6 Control system Control system manufacturer: HEIDENHAIN Control system model: iTNC 530 MACHINE DETAILS Input voltage: 400 V Input frequency: 50 Hz Input current: 63 A Fjdpfx Aszqunuskvspk Rated apparent power: 35 kVA Dimensions and weight Overall length: 7,000 mm Overall width: 2,700 mm Overall height: 2,900 mm Machine weight: 8,650 kg EQUIPMENT - Dividing head, 4th and 5th axis, manufacturer WALTER, type TANIH 200 - LANG 5-axis clamping system - RENISHAW measuring probe - Chip conveyor - Documentation and manuals External reference: Wahl - Lot 69 Note: without the machine vice located on the clamping surface.

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 630 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: 640M, spindle speed (max.): 12,000 rpm, spindle motor power: 26,000 W, number of slots in tool magazine: 120, number of axes: 5, This 5-axis Mazak Variaxis 630-5X was manufactured in 2003. It features a maximum X-axis travel of 630 mm, Y-axis travel of 765 mm, and Z-axis travel of 510 mm. The machine is equipped with a tool magazine holding 120 positions and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the Mazak Variaxis 630-5X vertical machining centre we have for sale. Contact us for further details. • Table size: 500 × 500 mm • Tool magazine capacity: 120 positionsCondition • Machine in working condition • Complete and fully operational • Sale due to reallocation of production assetsAvailability / Sale terms • EXW sale • Technical documentation available upon request • Available for commercial valuation Fpodpsy Ey N Nofx Akvek • Possible technical inspection / site visit • Direct purchase negotiations possible Additional equipment • Pallet system: Palletech – 12 stations + 2 loading/unloading stations • Renishaw workpiece probe • Laser tool presetting • High-pressure coolant system: 18 bar • Belt-type chip conveyor

Condition: used, Year of construction: 2008, Control OKUMA OSP-P200M. Cooling threw spindle. Rotating axe A Tsudakoma 250. Fjdpfxjzqtbgo Akvspk Chip conveyor RENISHAW OMP40 Tool probe Velikost upínací plochy 1000 x 460 mm Rozsah pojezdů os: Axe X 762 mm Axe Y 460 mm Axe Z 460 mm Spindle revolutions 50 - 8000 rpm DIN 40 Number of tool positions 48 Machine dimensions 2805 x 2160 x 2746 mm Machine weight 7100 kg

Condition: used, Year of construction: 1997, Mazak VTC-20B M+ Vertical CNC Machining Centre with Mazatrol M Plus CNC Control, Table Size 1460mm x 510mm, 20 Tool ATC, CAT 40 Spindle Taper, Spindle Speed Max 10,000rpm, Travels X = 1040mm, Y = 510mm, Z = 640mm, Table Load 500kg, Machine Weight 5850kg. S/No. 125075 (1997) Fedpezr Iymsfx Akvjpk Location: These lots are located in Burton-on-Trent, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: excellent (used), Year of construction: 2023, Traverses X Y Z; 1050 x 570 x 510mm, Table size 1300 x 570mm, min-max height spindle to table 150-660mm, spindle speed 12,000rpm, 30 station ATC, Fpedpfx Akjzqtb Hevok spindle taper BT40, spindle power 18.5 kW, Fanuc control, Through Spindle Coolant, swarf conveyor

Condition: excellent (used), Year of construction: 2001, DAEWOO MYNX 500 CNC VERTICAL MACHINING CENTER Brand: Daewoo Model: MYNX 500 Type: 3-axis vertical machining center Numerical control: FANUC Series 21-M FEATURES: – CNC vertical machining center – 3 axes – Complete machine – Number of operating hours: 11,764 hours Fsdpfsy S Altex Akvspk – Table: 1,000 x 500 mm A large number of tools are included with the machine.

Condition: excellent (used), Year of construction: 2006, operating hours: 8,800 h, machine/vehicle number: 15405022544, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, nominal power (apparent): 35 kVA, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece length (max.): 790 mm, workpiece width (max.): 560 mm, workpiece height (max.): 460 mm, table width: 560 mm, table length: 790 mm, table load: 600 kg, overall weight: 4,500 kg, operating hours of spindle: 8,800 h, input voltage: 400 V, Equipment: documentation/manual, DECKEL MAHO DMC 635 V – CNC Machining Center – Heidenhain iTNC 530 – Year of Construction 2006 Description: For sale is a vertical 3-axis CNC machining center, DECKEL MAHO DMC 635 V, from our own machine inventory. The machine is being sold due to a restructuring of our machine park. It is in good visual condition. Inspection and a powered test run are possible by prior appointment. Technical Data: Fedpfx Akszr Iu Devopk Manufacturer: DECKEL MAHO Model: DMC 635 V Machine Type: Vertical CNC Machining Center Year of Construction: 2006 Machine No.: 15405022544 Control: Heidenhain iTNC 530 Number of Axes: 3 Travel X-axis: 635 mm Travel Y-axis: 510 mm Travel Z-axis: 460 mm Table Size: approx. 790 × 560 mm Maximum Table Load: approx. 600 kg Tool Interface: SK 40 Rapid Traverse: up to approx. 30 m/min Machine Running Time: approx. 25,231 hours Spindle Hours: approx. 8,800 hours Connection Power: 35 kVA Operating Voltage: 400 V Frequency: 50/60 Hz Location and Handling: Location: 22926 Ahrensburg, Germany Machine available for immediate delivery Inspection possible by appointment Dismantling, loading, and transport by the buyer or by agreement Sale ex works, unloaded The offer includes only the machine and the explicitly agreed accessories. Tools and tool holders shown in the pictures are not part of the offer unless expressly agreed otherwise. Price: Negotiable, plus VAT. All technical data is provided to the best of our knowledge, but without guarantee. Subject to prior sale and errors.

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 4,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 750 mm, controller manufacturer: SIEMENS, controller model: 840D, total height: 4,000 mm, total width: 6,400 mm, overall weight: 27,500 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 28,000 W, product length (max.): 10,200 mm, number of axes: 3, This 3-axis STAMA MC 546/S was manufactured in 2001. It features a powerful main spindle motor with a maximum speed of 6,000 RPM and a torque of 840 Nm. The machine is equipped with Siemens control and motors for precise operation. If you are looking to get high-quality machining capabilities, consider the STAMA MC 546/S vertical machining centre we have for sale. Contact us for further details. Fodsy Nk T Tjpfx Akvepk - Throat Depth: 890 mm- Table to Spindle Nose Min.: 450 mm- Table to Spindle Nose Max.: 1200 mm- Max. Workpiece Weight: 15 kg- Table Clamping Surface Length: 4500 mm- Table Clamping Surface Width: 840 mm- T-Slots: 2 (22 DIN 650)- Slot Width: 22H12/H7- Slot Distance: 700 mm- Table Height Above Floor: 890 mm- Required Floor Area (L x W x H): 10.2 m x 6.4 m x 4.0 m- Total Weight: 27,400 kg- Connected Load: 50 kVA- Total Power Requirement: 50 kW- Voltage: 400 V (3~, 50 Hz)- Rated Current: 80 A- Spindle Bearing Diameter: 95 mm- Tool Taper / Holder: SK50- Max. Torque: 840 Nm with gear ratio i=4 (at 40% ED)- Spindle Speed Range: 36 - 6000 rpm- Tool Magazine Capacity: 60 tools- Tool Clamping Force: 20,000 N- Max. Tool Diameter: 180 mm- Max. Tool Length: 400 mm- Feed Rates (X, Y, Z): 1 - 10,000 mm/min- Rapid Traverse Rates (X / Y / Z): 30 m/min / 30 m/min / 22 m/min- Max. Feed Force (X / Y / Z): 12,000 N / 12,000 N / 18,000 N- Max. Milling Capacity: 1,000 cm³- Max. Drilling Diameter: 90 mm- Max. Tapping Diameter: M40- Included features: Weekend switch-off circuit; internal lighting- Not included: Clamping table; vices Technical Specification Taper Size SK 50

Condition: used, Year of construction: 1996, Table size 1600 x 650 mm X/Y/Z - 1300/650/660 mm Spindle taper BT 50 Fsdpfx Akezr Drfsvopk Spindle speeds 6000 rpm No. of pockets in tool changer 30 pcs. Control: Enshu/Fanuc Equipped with: Rotary table as 4th. axis 28 tool holders

Condition: used, Year of construction: 2009, x-travel 2.360/2x 930 mm y-travel 600 mm z-travel 600 mm table surface area 2.750 x 600 mm Control Siemens 840 D spindle tunring speed 30 - 6.000 U/min tool taper SK 50 number of tool places 26 Pos. Number of working hours ca. 50.884 h connected load 69 KVA weight of the machine ca. 20 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Handwheel, Heidenhain HR 410 - Chip conveyor - External belt filtration system Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Fsdpfx Aezqgh Hekvspk Subject to change, errors in technical data and specifications, and prior sale.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 7,474 h, travel distance X-axis: 508 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 356 mm, controller manufacturer: HAAS, table load: 227 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis HAAS Mini Mill 2 was manufactured in 2012. It features an X-axis travel of 508 mm, Y-axis travel of 406 mm, and Z-axis travel of 356 mm. The machine includes a table size of 1,016 × 356 mm and a maximum table load of 227 kg. If you are looking to get high-quality machining capabilities, consider the HAAS Mini Mill 2 vertical machining centre we have for sale. Contact us for further details. • Table: • Size: 1,016 × 356 mm • T-slots: 3 × 16 mm • T-slot spacing: approx. 110 mm • Feed rates: Fpedezbh U Djpfx Akvjk • Max cutting feed: 12.7 m/min • Rapid traverse: 15.2 m/min • Electrical: • Power supply: 360–480 V / 3 Ph / 50–60 Hz Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller manufacturer: SIEMENS, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Huron KX20 vertical machining centre was manufactured in 2002. It features an impressive X-axis travel of 1,200 mm, Y-axis travel of 900 mm, and Z-axis travel of 500 mm. With a spindle speed of 18,000 RPM and a tool magazine with 30 positions, this machine is designed for high-speed performance in molds, dies, and aerospace components. If you are looking to get high-quality machining capabilities, consider the Huron KX20 machine we have for sale. Contact us for further details. • Quantity available: 2 units • Purchasing: Special bundle conditions available when buying both units • Key highlights: • High-speed performance for molds, dies, and aerospace components with excellent surface finish • Siemens control and HSK40 taper for seamless integration into modern production Fedpfx Akezqczcsvopk Technical Specification Taper Size HSK 40

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 1,000 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 360 mm, controller manufacturer: FANUC, controller model: 18i-MB5, spindle speed (max.): 12,000 rpm, spindle motor power: 21,000 W, number of axes: 3, This 3-axis STAMA MC 526 vertical machining center was manufactured in 2008. It features a Fanuc 18i-MB5 CNC, twin-spindle with double tool changer, and a high-pressure coolant system. The machine offers a spindle speed of 12,000 rpm, spindle power of 21 kW, and a tool capacity of 60. X/Y/Z travels are 1000/400/360 mm respectively. If you are looking to get high-quality milling capabilities consider the STAMA MC 526 machine we have for sale.Contact us for more information. • Number of tools (ATC): 60 • Twin-spindle with double tool changer: Yes • Rapid feed (X/Y/Z): 45 m/min • Guideways: Roller guideways Additional equipment • CNC rotary table with continuous rotation (4th axis) • High-pressure coolant Fpedpfx Ajx D E Rmekvek • Chip conveyor: Belt-type Technical Specification Taper Size HSK 63

Condition: ready for operation (used), Year of construction: 2015, operating hours: 500 h, travel distance X-axis: 2,050 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 750 mm, table load: 2,500 kg, overall weight: 20,500 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 36, number of axes: 3, This 3-axis Okuma Millac 852 VII was manufactured in 2015. It features a robust table size of 2,200 × 850 mm and a maximum table load of 2,500 kg. The machine is equipped with a high-torque spindle motor of 18.5 kW and a rapid traverse of 20,000 mm/min. If you are looking to get high-quality machining capabilities, consider the Okuma Millac 852 VII vertical machining centre we have for sale. Contact us for further details. • Condition: Excellent; approximately 500 cutting hours; near-new condition • Heavy-duty machining center for high material removal rates • Extremely rigid machine structure • Box guideways on all axes; quadruple box guideway system on Y-axis • Automatic oil lubrication for guideways with machine stop monitoring • Okuma OSP300 control with IGF conversational programming • Parameterized automatic tool collision prevention system • Automatic cutting force, tool load, and spindle torque monitoring • Tool life management and tool usage monitoring • Communication interfaces: USB, PCMCIA, RS-232 • Cutting force: 580 Nm • Chip removal capacity: 540 cm³/min • Spindle speed: 6,000 rpm • Spindle oil cooler • Table size: 2,200 × 850 mm • Rapid traverse: 20,000 mm/min • Tool change time: 0.5 s; chip-to-chip time: 5 s Fpjdpfxszqcr Ie Akvjk • Machine currently under production; can be inspected under power by an official Okuma technician • Includes documentation: spare parts list, electrical diagrams, programming manual, operation manual • Delivery: Immediate, subject to prior sale Additional equipment • Renishaw tool measuring system • Independent Knoll high-pressure coolant system (70 bar) • 30-micron coolant filtration system • LTA mist extraction system • Rear hinge-type chip conveyor • Large set of BT50 tool holders • Transformer Technical Specification Taper Size BT 50

Condition: reconditioned (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 420 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, torque: 90 Nm, controller manufacturer: FANUC, controller model: series 31i-B5, rotational speed (max.): 24,000 rpm, tool length: 200 mm, tool diameter: 60 mm, tool weight: 4,000 g, input voltage: 400 V, type of input current: three-phase, number of tool turrets: 1, number of tool stations in tool turret 1: 12, number of driven tool stations in tool turret 1: 12, Equipment: chip conveyor, CNC Machining Center CHIRON FZ12 MT TECHNICAL CHARACTERISTICS: Year of manufacturing: 2013 CNC control: FANUC series 31i-B5 Fpodpfszqbdiex Akvok Stroke X axis: 550 [mm] Stroke Y axis: 320 [mm] Stroke Z axis: 420 [mm] Traversing feeds X, Y and Z axes: 75000 [mm/min] X/Y/Z axis acceleration: 10/12/15 [m/s] Max. bar diameter in turning spindle: 32 [mm] Main spindle max. speed: 8000 [rpm] Max. turning spindle torque: 90 [Nm] Max. counter spindle speed: 6500 [rpm] Counter spindle torque: 14.3 [Nm] Tool changer magazin number of stations: 24 Max. tool lenght: 200 [mm] Max. weight of single tool: 4 [Kg] Max. tool diameter: 60 [mm] Number of tool stations: 12 Number of tool stations driven: 12 Max. speed driven tools: 5000 [rpm] Milling head spindle attachment: HSK-A 50 Stroke B axis: -10 [°] / +100 Max. milling spindle speed: 24000 [rpm] Max. milling spindle power: 36 [kW] Max. milling spindle torque: 29 [Nm] Tool change time: 0.9 [sec] Chip to chip time: 2.4 [sec] Rated current: 125 [A] Total power required: 85 [kVA] Supply voltage: 400 [V] INCLUDED EQUIPMENT: 1 × High Speed Plus package 1 × LNS QUICK LOAD SERVO 80 S2 bar feeder 1 × KNOLL KF 150/500 paper band filtration unit 1 × 40 bar high-pressure coolant system 1 × Oil cooling unit 1 × KNOLL 600 K-1/200 chip conveyor 1 × RENISHAW workpiece probe 1 × RENISHAW TS27R tool setter 1 × ELBARON oil mist extraction unit Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine similar to Mikron, Hermle, DMG MORI, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas and Alzmetall, as well as CNC milling, drilling and tapping machines, and CNC grinding machines.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 4,100 mm, travel distance Y-axis: 2,700 mm, travel distance Z-axis: 1,100 mm, workpiece length (max.): 4,000 mm, workpiece width (max.): 2,000 mm, workpiece height (max.): 1,100 mm, table width: 2,100 mm, table height: 1,100 mm, table length: 4,000 mm, overall weight: 40,500 kg, spindle speed (max.): 6,000 rpm, distance table center to spindle nose: 1,100 mm, We offer this as new Kafo KMC-4127 vertical machining center, year of construction 2021. The machine only processed our parts. It did not do any contract manufacturing. Fjdpfx Akozrzggjvjpk If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Table dimensions: 1,300 x 600 mm Travel range: X-axis 1,100 mm; Y-axis 650 mm; Z-axis 600 mm Feed rate: X-Y-Z axes 7,000 mm/min Rapid traverse: X-Y axes: 15 m/min Rapid traverse: Z-axis 15 m/min Tool holder: SK40 Fpsdpfxjzrwzms Akvek Tool turret: 24 positions Main spindle speed: max. 8,000 rpm Main spindle drive: 9 kW Control system: SIEMENS 810D Powerline Year of manufacture: 2006 Additional features: 4 and 5 axes Machine weight: approx. 7,500 kg

Condition: ready for operation (used), Year of construction: 2005, Make: YAMAZAKI MAZAK U.K. LTD Fedpfx Aszru Rfekvspk Type of machine: VTC-200C Year of manufacture: 2005 Control system: Mazatrol 640 M Machine's weight: 8.260 kg Tool holder: SK 40 x-travel: 1.660 mm y-travel: 510 mm z-travel: 510 mm Speed range: 12.000 U/min Table dimensions: 2.000 × 510 mm Number of tools in the magazine: 24 Plätze

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 68, Equipment: cooling unit, documentation/manual, MIKRON HSM 400 U vertical machining center, equipped with HEIDENHAIN TNC 530, manufactured in 2007. Fpjdpfx Akszru Idjvjk Gantry structure. Table equipped with EROWA ITS 148 receiver. Travel: X 400, Y 240, Z 350, B +110°/-110°, C 360°. Feed rate: X, Y, Z 40 m/min. Table load: up to 25 kg. Electromandrel head, 42,000 rpm, 12/13 kW, HSK E40. X, Y, Z linear scales. Chip extractor. Head coolant unit. 68-tool changer. Machine weight: 7,000 kg.

Condition: used, Year of construction: 2007, operating hours: 5,200 h, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, controller manufacturer: Fanuc, controller model: 0i MC, total height: 2,600 mm, total length: 2,200 mm, total width: 2,100 mm, table width: 510 mm, table length: 810 mm, table load: 500 kg, overall weight: 5,500 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 11 W, Equipment: chip conveyor, documentation/manual, 24 ATC Cooling through the spindle Fsdpfx Aozrugyokvopk Manual paletchanger Chipconveyor

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 12,000 rpm, Work area Travel range X: 1,000 mm Travel range Y: 550 mm Travel range Z: 500 mm Clamping area (L x W): 1,100 x 502 Table load: 700 kg Spindle Speed: 12,000 rpm Power: 20.9 kW (25% duty cycle) Torque: 178 Nm (25% duty cycle) Tool holder: BBT 40 (conversion to SK 40 possible) General Tool changer: 30-position (double gripper) Machine bed: High-strength Meehanite casting Rapid traverse rate: 36 / 36 / 30 m/min Equipment Chip management: Chip conveyor incl. chip flushing in the work area Fpedpfx Aezf Hupskvok Coolant management: Internal coolant supply (IKZ 30 bar) Cooling air: Programmable external cooling Temperature management: Cooling unit for spindle oil Run-in assistance: Electronic handwheel Network connection: Ethernet interface 4th axis: PLC-side preparation Conversion kit to SK 40: Included