Condition: ready for operation (used), Year of construction: 2012, operating hours: 9,020 h, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 24 m/min, controller manufacturer: FANUC, controller model: MXP-200FB, workpiece weight (max.): 800 kg, total height: 2,765 mm, total length: 3,650 mm, total width: 2,950 mm, table width: 600 mm, table length: 1,120 mm, table load: 800 kg, overall weight: 6,500 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 9,020 h, spindle motor power: 11,000 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, We acquired this machine in working condition from a production environment, and it has always been well-maintained. The machine is in excellent mechanical and visual condition and is currently set up and operational in our showroom! Additional options & accessories: - Chip conveyor Chodpj Abkdwjfx Agred - Internal cooling system (ICS) - 30-position tool changer (standard 20 positions) - Electronic handwheel - Air and coolant gun - All original documentation - Oil skimmer

Condition: like new (used), Year of construction: 2015, functionality: fully functional, * Okuma Millac 852V II / 50. * Machine in excellent condition with very few operating hours. * Machine designed for high chip removal capacity. * Prismatic guides on all axes. * Quadruple prismatic guide system on the Y-axis. * Extremely rigid structure. * Oil-fed guide lubrication system with automatic machine shutdown. * Renishaw tool presetter. * BT 50 spindle taper. * 18.5 kW high-torque motor. * Cutting torque: 580 N/m. * Chip removal capacity: 540 cm/min. * Okuma IGF OSP300 automatic conversational programming system. * Automatic force control and tool wear monitoring. * Parameterized automatic tool anti-collision system. * Communication ports via USB, PCMCIA card, and RS-232. Cjdps Ahna Refx Agrohd * Tool life management and tool wear monitoring. * Automatic control of tool torque and stresses. * Table dimensions: 2,200 x 850 mm. * Maximum load capacity: 2,500 kg. * Spindle speed: 6,000 rpm. * X-axis travel: 2,050 mm. * Y-axis travel: 850 mm. * Z-axis travel: 750 mm. * Spindle oil cooler. * Rapid traverse speed: 20,000 mm/min. * Tool magazine capacity: 36 tools. * Tool change time: 0.5 seconds. * Chip-to-chip time: 5 seconds. * Independent Knoll coolant system with 70 bar pressure. * 30-micron particulate filter system. * LTA smoke filtration equipment. * Hinged rear chip extractors. * Machine currently in production. * Can be inspected by a certified Okuma technician. * Condition: like new. * Extensive set of BT 50 collets. * Electrical transformer, documentation, parts list, electrical schematics, and programming and operations manual. * Machine weight: 20,500 kg. * Immediate delivery, unless sold immediately.

Condition: ready for operation (used), Year of construction: 2023, Make: POS Type of machine: POSmill CE 1000 Year of manufacture: 2023 Control system: Heidenhain TNC 640 Tool holder: SK 40 x-travel: 1.060 mm y-travel: 600 mm z-travel: 600 mm Speed range: 10.000 U/min max. Table load: 800 kg Spindle operating time: 533 h Cjdpfxj Ah Ifuo Agrohd Table dimensions: 1200 × 550 mm Number of tools in the magazine: 40 Pl. Internal coolant supply: 20 bar

Condition: used, Year of construction: 2013, Doosan DNM650 Vertical Machining Centre (2013), Traverses X Y Z: 1300 x 650 x 510mm, Table 1200 x 540mm, Spindle Speed 12,000rpm, BT40 Spindle Taper, Spindle Motor 17kW, FANUC Oi Control, 30 Station ATC, Low Volt light, Through Spindle Coolant. S/No. MV0011-000877, Machine Weight: 8500kg. Country of Origin: Korea Chodpfxj Ah E S Ho Agrsd Location: This lot is located in Leicester, UK. A charge of £250 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: good (used), Year of construction: 2011, Haas VF-3YT/50 vertical machining center, manufactured in 2011. Csdpfx Ao Ahxqyogrjhd

Condition: excellent (used), Year of construction: 2000, operating hours: 24,695 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, spindle speed (max.): 15,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: approx. 1,000 mm Y-axis travel: approx. 800 mm Z-axis travel: approx. 500 mm Table length: approx. 1,250 mm Table width: approx. 800 mm Table load capacity: max. approx. 1,200 kg Chsdpfxj Afxn Sj Agred Spindle speed: up to approx. 15,000 rpm Tool holder: SK 40 MACHINE DETAILS Control system: Heidenhain Spindle operating time: 24,695 h Machine operating hours: 64,814 h Control system operating hours: 72,542 h EQUIPMENT Automatic tool changer Renishaw probing system Coolant system Chip conveyor

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, CNC machining center Hedelius Forte 7-2600 Magnum Control system: Heidenhain TNC 640 Year of manufacture: 2020 Availability: in transit Internal machine no. 73 Cjdpfx Aezzl Ugsgrohd Travel ranges: X-axis 2,600 mm Y-axis 750 mm Z-axis 800 mm Shuttle operation: 2 x 1,000 mm Total clamping area 2x 1,490 x 750 mm Table load: approx. 2,500 kg Tool holder: HSK 63 Tool magazine: 50 positions Spindle speed: 50 - 18,000 rpm Drive power: 35 kW Equipment: - Chip conveyor - 2x coolant nozzles - Electronic handwheel - 3D measuring probe - Toolsetter preparation - Partition - High-pressure pump 60 bar - Zero-point clamping plates - Vises and tools as required

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, machine/vehicle number: 15405034874, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 20 kVA, controller manufacturer: HEIDENHAIN, controller model: ITNC 530, total height: 2,400 mm, total length: 2,500 mm, total width: 2,100 mm, table width: 560 mm, table length: 790 mm, table load: 600 kg, overall weight: 7,000 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 11,164 h, number of slots in tool magazine: 20, mount diameter: 40 mm, tool length: 300 mm, tool diameter: 80 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 35 A, feed force X-axis: 5,000 N, feed force Y-axis: 5,000 N, feed force Z-axis: 5,000 N, DECKEL MAHO DMC 635 V CNC Vertical Machining Center - Tool holder: SK 40 - Input resolution X/Y/Z: 0.01 mm - Path measuring system resolution X/Y/Z: 0.001 mm - Positioning tolerance in X/Y/Z with indirect measuring system: 0.020 mm, with direct measuring system: 0.008 mm - Max. tool diameter: 80 mm without free spaces, with free spaces: 130 mm - Max. tool length from spindle nose: 300 mm - Max. tool weight with automatic tool changer: 6 kg Chsdps Afulmsfx Agred - Distance between T-slots: 100 mm - Number of clamping slots: 4 Note: without the machine vices shown in the photos! Includes the SK 40 tool holders located in the tool changer, as well as a 3D measuring probe. Note: Spindle needs to be inspected! FCA D-71679 Asperg - loaded onto a truck.

Condition: ready for operation (used), Year of construction: 2002, operating hours: 8,676 h, functionality: fully functional, HURCO VMX 30 – CNC Vertical Machining Center with LEHMANN Dividing Table Manufacturer: HURCO Model: VMX 30 Year of Manufacture: 03/2002 Control System: HURCO Ultimax Machine Type: CNC Vertical Machining Center Technical Data X-axis: 760 mm Y-axis: 510 mm Z-axis: 610 mm Rapid Traverse X/Y/Z: 30/30/20 m/min Table Dimensions: 1,020 × 510 mm T-slots: 5 × 18 mm T-slot spacing: 100 mm Maximum Table Load: approx. 1,000 kg Spindle Speed: up to 10,000 rpm Spindle Drive Power: approx. 11 kW Tool Holder: SK40 Automatic Tool Changer 24 tool positions Tool holder SK40 HURCO Ultimax Dual-screen control system Special equipment CNC-controlled dividing table from LEHMANN Chjdpfxs Agwx Ne Agrjd Fully integrated into the HURCO control system Control directly via the CNC control system Fully functional Machine Dimensions and Weight Machine Weight: approx. 4,700 kg Machine Height: approx. 2,775 mm Footprint: approx. 3,870 × 4,170 mm including work area Condition and Scope of Delivery The machine is in used condition, commensurate with its year of manufacture, and shows visible signs of wear. Technically, the machine is fully functional. All existing machine functions, as well as the integrated LEHMANN dividing table, are functioning perfectly. The machine is sold including the LEHMANN dividing table. Not included in the scope of delivery: The clamping devices and clamping elements visible in the pictures Tools and tool holders The machine is suitable for single-part production as well as for small and medium-sized series. The machine can be viewed by appointment. The machine is expected to remain powered and available for demonstration until mid-calendar week 46/2026 (approx. November 11, 2026). An inspection and functional test while powered is possible within this period by arrangement. All technical specifications are without guarantee. Subject to prior sale.

Condition: used, Year of construction: 2011, HAAS VF-3 Vertical Machining Centre (2011), Traverses X Y Z: 1016 x 508 x 635mm, Table 1200mm x 460mm, Spindle Speed 0 – 7,500rpm, Spindle Taper BT40, Spindle Motor 20Hp, HAAS Control, 40 Station Side Arm ATC, Through Spindle Coolant, Low Volt Light. S/No. 1083369. Country of Origin: U.S.A. Cede Ah Hbcepfx Agrshd Location: This lot is located in Leicester, UK. A charge of £250 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: good (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 7,500 rpm, CNC milling machine, type Fadal VMC15, model 914, for sale. The milling machine is in perfect working order and is currently still in use. A functional video is available upon request. Includes a PC for the CNC programs. - Travel in X: 500 mm - Travel in Y: 400 mm - Travel in Z: 500 mm - Spindle speed up to 7,500 rpm - SK-40 tool holder - Table area 750x400 mm - 10-position tool changer Chedpfx Ago Ahi Uhorod Loading will be done with a forklift. Please feel free to contact us if you have any questions.

Condition: good (used), Year of construction: 2016, operating hours: 17,000 h, functionality: fully functional, FOR SALE 5-Axis Machining Center – DMG MORI DMU 95 monoBLOCK® YEAR 2016 Description: Selling a DMG MORI vertical 5-axis simultaneous machining center (Deckel Maho Pfronten GmbH), year 2015. A versatile, highly rigid, and well-equipped professional machine. Suitable for complex and high-precision machining operations. Can be viewed powered on and in operation on site. Main Features: • Numerical Control: HEIDENHAIN TNC 640 (ERGOline® interface) • Spindle speed max: 20,000 rpm • Hour counters: Power on: 48,878 h | Actual machining: 17,030 h • Machine weight: ~14,000 kg (14 tons) Capabilities & Machining Envelope: • Travels: X = 950 mm | Y = 850 mm | Z = 650 mm • Max. workpiece dimensions: Ø 1,040 mm x Height 590 mm • Tilting rotary table: Ø 850 x 750 mm (Max. load 1,000 kg) • Tool magazine: 60 positions Equipment & Included Options: • HEIDENHAIN TS 649 infrared workpiece probe • BLUM laser tool measurement system • quickSET 3D geometric control kit • Remote electronic handwheel • Nozzle ring for coolant around the spindle • Safe operating mode: Mode 4 • Automatic chip conveyor & Original transformer • 3D STEP digital model of the machine included (for simulation/CAM) Conditions: • Removal, lifting, and transport are the sole responsibility of the buyer. PRICE Cedpfe Af Aiasx Agrjhd €173,000

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: w3-1200, CNC Vertical Machining Center VICTOR V-CENTER 85 – 2003 – High Pressure – Chip Conveyor For sale, a CNC vertical machining center, VICTOR V-CENTER 85, manufactured in 2003. A robust and versatile industrial machine designed for milling, drilling, tapping, and precision machining operations. Equipped with a high-pressure coolant pump and a chip conveyor, allowing for better chip removal and efficient cooling during machining. General Specifications Brand: VICTOR Model: V-CENTER 85 Year of Manufacture: 2003 Type: CNC Vertical Machining Center Number of Axes: 3 Axis Travels X-axis Travel: 850 mm Y-axis Travel: 520 mm Z-axis Travel: 560 mm Work Table Table Dimensions: 1,100 × 510 mm Maximum Permissible Load: 750 to 1,000 kg Spindle Spindle Taper: BT40 Maximum Speed: 8,000 rpm Motor Power: 5.5 / 7.5 kW Tool Magazine Capacity: Up to 24 tools Tool Change: Automatic Equipment and Options High-pressure coolant pump Chip conveyor Coolant system for cooling tools and workpieces Automatic tool changer Dimensions and Weight Chsdpfx Ae Agvwlogrod Length: Approximately 2,450 mm Width: Approximately 2,400 mm Height: Approximately 2,640 mm Weight: Approximately 5,950 kg Dimensions and weight are approximate and may vary depending on the version and installed equipment. The footprint of the chip conveyor should be verified separately. Additional Information Machine can be viewed by appointment in Sprimont, Belgium. Price indicated excludes VAT – VAT is recoverable according to applicable conditions. For further information or to arrange a visit:

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Machine is fully functional. Chjde Agik Nepfx Agred

Condition: used, Year of construction: 2008, operating hours: 3,096 h, functionality: fully functional, machine/vehicle number: 1069140, overall weight: 4,500 kg, spindle motor power: 14,900 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, HAAS VF-4BHE Vertical CNC Machining Center – 2008 We offer for sale a used HAAS VF-4BHE vertical CNC machining center, manufactured in 2008. Since its purchase, the machine has been used by a single group of companies, operating on one shift and primarily employed for machining aluminum. The machining center is in full working order, has no history of accidents, and is maintained in good operational condition. Technical specifications and equipment: - Manufacturer: HAAS - Model: VF-4BHE - Year of manufacture: 2008 - Type: Vertical CNC machining center - Technical condition: fully operational - Servo drive operating time: 3,096 h - Motion time: 594 h - Spindle operating time: 656 h - Tool measurement: Renishaw tool sensor - Part probing: not available Cjde Afypkopfx Agrjhd - Control software version: M16.10A Terms of sale: The seller does not provide machine loading services – the organization of loading and transportation is the responsibility of the buyer.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: BJ9-002-042, travel distance X-axis: 560 mm, travel distance Y-axis: 355 mm, travel distance Z-axis: 355 mm, controller model: Hurco Ultimax, spindle speed (max.): 6,000 rpm, Equipment: documentation/manual, TECHNICAL DETAILS Chodpfs Afwwbox Agrod X-axis travel: approx. 560 mm Y-axis travel: approx. 355 mm Z-axis travel: approx. 355 mm Table length: approx. 760 mm Table width: approx. 355 mm Spindle speed: up to 6,000 rpm Tool holder: SK40 / CAT40 Main motor power: approx. 7.5–10 HP Tool positions: 16 Rapid traverse: approx. 10 m/min MACHINE DETAILS Control system: Hurco Ultimax Machine weight: approx. 3,200 kg EQUIPMENT 16-position tool changer Various accessories

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain TNC 426, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Cedpfs Afxpzsx Agrshd TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 600 mm Table length: 750 mm Table width: 450 mm Spindle speed: max. 10,000 rpm Tool positions: 24 MACHINE DETAILS Control system: Heidenhain TNC 426 EQUIPMENT 24-position tool changer

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, controller manufacturer: HEIDENHAIN, controller model: TNC-620, workpiece weight (max.): 1,300 kg, total height: 3,100 mm, total length: 4,400 mm, total width: 2,450 mm, table width: 670 mm, table length: 1,600 mm, overall weight: 9,000 kg, spindle speed (min.): 80 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 775 mm, spindle nose: ISO 40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, Used 3-axis vertical machining center with Heidenhain TNC-620 CNC Chsdpfx Ae Afpq Rjgred

Condition: excellent (used), Year of construction: 2008, operating hours: 2,483 h, functionality: fully functional, machine/vehicle number: 8015, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,200 mm Travel range, Y-axis: 600 mm Travel range, Z-axis: 600 mm Rapid traverse rate X/Y: 30 m/min Rapid traverse rate Z: 24 m/min Table size: 1,300 × 600 mm Spindle speed: 50–12,000 rpm Spindle power: 21 / 15 kW Tool holder: BT40 Spindle drive: direct drive Tool positions: 40 Tool change time: approx. 4 s Tool changer: dual gripper MACHINE DETAILS Coolant pressure: 20 bar CNC control: Heidenhain iTNC 530 Screen diagonal: 15 inches Operating voltage: 400 V Connected power: 25 kVA Mains frequency: 50/60 Hz Number of phases: 3 Machine weight: approx. 7,500 kg Chjdpfx Agj Aggibjred Operating hours Spindle hours: 2,483 h Machine operating hours: 14,198 h Control operating hours: 65,193 h EQUIPMENT Automatic tool changer with dual gripper Internal cooling through the spindle (IKZ), Form A High-pressure coolant system Additional coolant tank Two switchable filter cartridges Chip conveyor parallel to the X-axis Three-color signal light (red/yellow/green) Fully enclosed work area Work area lighting Machine documentation Toolbox Alignment screws and washers CE specification

Condition: not inspected (used), Year of construction: 2016, functionality: unexamined, machine/vehicle number: L2TAF0101, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, nominal power (apparent): 30 kVA, controller manufacturer: SIEMENS, controller model: SINUMERIK 828 D, total height: 2,500 mm, total length: 3,000 mm, total width: 2,400 mm, table width: 450 mm, table length: 860 mm, overall weight: 4,000 kg, spindle speed (max.): 12,000 rpm, input voltage: 400 V, input frequency: 50 Hz, Equipment: chip conveyor, documentation/manual, LEADWELL V-30 iV CNC Vertical Machining Center - Tool holder: BT 40 Csdpfx Ags Afuu Isrjhd - Table with three T-slots - Includes documentation and chip conveyor The machine is equipped with a tool changer, including the tool holders from the changer. FCA D-94227 Zwiesel – loaded onto a truck.

Condition: used, Year of construction: 2011, travel distance X-axis: 520 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 360 mm, controller model: FANUC 31i-A5, spindle speed (max.): 10,500 rpm, TECHNICAL DETAILS X-axis travel: 520 mm Y-axis travel: 360 mm Z-axis travel: 360 mm Distance from spindle nose to table: 200–560 mm Rapid traverse rate X/Y/Z: 60 m/min Spindle speed range: 36–10,500 rpm Spindle power: 30–35 kW Tool holder: HSK-A63 Number of pallets: 2 Pallet load: max. 450 kg Magazine capacity: 2 × 21 Tool diameter: max. 88 mm Tool diameter with free neighboring positions: max. 125 mm Tool length: max. 250 mm MACHINE DETAILS CNC control: FANUC 31i-A5 Dimensions & Weight Machine weight: 5,300 kg Overall dimensions: 3,200 × 3,250 × 3,245 mm EQUIPMENT Chip conveyor Paper filter High-pressure coolant pump Chjdo Agfrwopfx Agrod Tool setting 4-axis table, 1 piece

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 703 mm, travel distance Y-axis: 603 mm, travel distance Z-axis: 503 mm, controller manufacturer: Fanuc, controller model: 0i-MD, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, Equipment: chip conveyor, Table swivels +31.1° / -121.7° Table rotates 360° Chedpfxe Afw A Us Agrsd Prepared for 3D probe

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, spindle speed (max.): 12,000 rpm, distance table to spindle center: 150 mm, spindle nose: BT40, number of slots in tool magazine: 30, Equipment: chip conveyor, CNC milling machine of medium dimensions, intended for both rough and fine processing. Csdpfx Aj Af U Ezegrjhd A powerful motor in combination with high rigidity and a high-precision base spindle enable large removals and precision. The machine is a suitable answer to a wide range of requirements in production, especially in toolmaking. The machine is sold as a set with the equipment described in the listing. Machine is is good condition and regularly maintained. -15 " display -2MB part program storage - 1000 programs - 12.000 RPM spindle 18,5kW, 118Nm -BT40 -30 tools magazine - 12 bar through the spindle cooling -oil skimmer belt type -ethernet connection -coolant gun -ball screw nut cooling -tool breakage detection in magazine -automatic doors -robot interface -4th axis preparation -Hiwin RCV 250 rotary table -HIWIN RTS 250 suport -Hidraulic aggregate 200 bar 2 A+B -4th axis fixture support hydraulic (3x oil, 2x air) -seat air check -level sensor for coolant liquid -LNS MH500 chip conveyor -mist collector interface

Condition: ready for operation (used), Year of construction: 2024, operating hours: 54 h, travel distance X-axis: 1,630 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 650 mm, controller manufacturer: FANUC, controller model: i-Series, total height: 3,170 mm, total width: 3,850 mm, table width: 1,630 mm, table length: 760 mm, table load: 1,500 kg, overall weight: 13,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 28,000 W, number of slots in tool magazine: 30, tool weight: 8,000 g, product length (max.): 3,480 mm, number of axes: 3, This 3-axis DOOSAN DNM 750 II was manufactured in 2023. It features a generous X-axis travel of 1,630 mm, Y-axis travel of 762 mm, and Z-axis travel of 650 mm. The machine has a maximum table load capacity of 1,500 kg and a spindle speed range of up to 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 750 II vertical machining centre we have for sale. Contact us for further details. Csdj Ahpqmopfx Agrohd - Manufacturer: DN SOLUTIONS- Model: DNM 750 II- Year of Manufacture / Build Date: 12/2023- CNC Control: FANUC i-Series (Fanuc F0i Touch with Manual Guide / EZ Guide and Fanuc HMI)- Screen Size: 15" Touch Screen- Operating Hours:* Control On (STRG EIN): 299 h 5 min* Operating Time / Run Time: 53 h 54 min 14 s* Machining Time: 40 h 15 min 28 s* Cycle Time: 0 h 0 m 0 s- Travel X-Axis: 1,630 mm- Travel Y-Axis: 762 mm- Travel Z-Axis: 650 mm- Table Size: 1,630 x 760 mm- Table Surface: T-slots (5 - 125 x 18H8)- Max. Workpiece Dimensions / Height: 725 mm- Max. Table Load Capacity: 1,500 kg- Distance Spindle Nose to Table Surface: 150 - 800 mm- Rapid Traverse (X / Y / Z): 30 / 30 / 24 m/min- Max. Cutting Feedrate: 12,000 mm/min- Acceleration / Deceleration Time (X / Y / Z): 150 / 160 / 150 ms- Axis Drive Motor Power (X / Y / Z): 4 / 4 / 4 kW- Ball Screw Diameter x Lead (X / Y / Z): 45 x 12 mm / 45 x 12 mm / 45 x 10 mm- Positioning Accuracy (X / Y / Z): 0.014 mm / 0.008 mm / 0.008 mm- Repeatability (X / Y / Z): 0.007 mm / 0.005 mm / 0.005 mm- Spindle Speed Range: Up to 12,000 rpm- Spindle Drive Type: Direct Connection (Type 2)- Spindle Motor Power (Continuous / S3 25%): 11 kW / 28 kW- Spindle Base Speed: 1,500 rpm- Max. Spindle Torque: 159.3 Nm (S3 15%)- Spindle Clamping Force: 7.35 kN- Tool Holder Taper: SK40 (converted to SK40 per order confirmation DIN 69871 / ISO 7388-3; convertible to BT40 / BBT40)- Spindle Cooling Tank Capacity: 40 L (Cooling capacity 1.56 kW at 50 Hz / 1.76 kW at 60 Hz)- Tool Storage Capacity: 30 tool stations- Tool Selection Type: Memory Random- Max. Tool Diameter (Continuous): 80 mm- Max. Tool Diameter (Adjacent Pots Empty): 125 mm- Max. Tool Length: 300 mm- Max. Tool Weight: 8 kg- Max. Tool Moment: 5.88 Nm- Tool-to-Tool Time: 1.6 s (50 Hz) / 1.3 s (60 Hz)- Chip-to-Chip Time: 4.0 s (50 Hz) / 3.7 s (60 Hz)- Through-Spindle Coolant (TSC / IKZ): Middle pressure, 4.0 kW pump, 20 bar, 25 µm cyclone filter- External Flood Coolant: 1.8 kW pump, 7 bar, 30 L/min- Coolant Flush Pump (Inside Flushing): 1.1 kW, max. 0.75 MPa (50 Hz), 20 L/min- Coolant Tank Capacity: 520 L- Coolant Gun: Included (with separate pump 0.6 kW)- Air Gun: Included- Spindle Compressed Air Blow: Compressed air outlet above spindle for chuck/fixture cleaning- Oil Skimmer: Belt type- Mist Collector / Oil Mist Extraction: Dormatec AF-30P (0.75 kW, 29 m³/min capacity, 200 mm inlet, H13 filter, 99.

Condition: used, Year of construction: 2015, travel -x axis 620 mm travel -y axis 520 mm travel -z axis 420 mm control HEIDENHAIN - TNC 620 number of spindle speeds 12.000 NC rotary indexing table Ø 650 mm table: swivelling -90 / +110 Grad table load 300 kg numbers of positions in the tool changer 32 tool taper SK40 5-axis simultaneous machining center | SPINNER - U5 - 620 equipped with ITC, NC swivel rotary table, tool changer & chip conveyor. The machine is in a well-maintained condition and can be inspected at any time under power. Chedpfx Ago Ahzi Esrod Please refer to the offer for further technical details. Documentation is available! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: U5 620 | U5-620