Condition: excellent (used), Year of construction: 2016, 5-axis simultaneous machining center Year of manufacture: 2016 Röders proprietary control 1.) Working area: 1000 x 1050 x 600 mm 2.) Max. workpiece weight: 800 kg 3.) Milling spindle: 32,000 rpm 3.) Tool changer: 30 positions Redpfsyaa T Nex Adaen 4.) Guideway system: Hydrostatic on all axes 5.) Drive: Linear motors 6.) 5-axis machine, swivel range A-axis ±115°, rotary C-axis 360° 7.) Control: Röders RMS6 5.52 8.) Machine weight approx. 21,000 kg 9.) Space requirement: 3500 x 5500 x 3600 mm with dust extraction

Condition: repair required (used), Year of construction: 1991, functionality: limited functionality, travel distance X-axis: 1,000 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, controller manufacturer: Heidenhain, controller model: TNC355, workpiece weight (max.): 1,200 kg, overall weight: 5,000 kg, spindle speed (max.): 3,500 rpm, Equipment: chip conveyor, documentation/manual, For sale: Reiden BF1 bed-type milling machine - Automatic probe - Programmable swivel head horizontal/vertical - Tool holder SK45 - Chip conveyor Tool holders are included. When powering up, the machine displays the error message "Feed controller malfunction." Therefore, it is being sold as defective. No warranty, guarantee, or returns. Redpfsyc Ebqex Adasn

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, nominal power (apparent): 17 kVA, total height: 2,300 mm, total length: 1,500 mm, total width: 2,600 mm, overall weight: 3,400 kg, spindle speed (max.): 30,000 rpm, spindle nose: HSK40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, CNC machining center CHIRON FZ08 KS Magnum High Speed Plus (HSP) TECHNICAL CHARACTERISTICS: Year of manufacturing: 2007 CNC control : FANUC 18i-MB5 Number of axes : 7 Stroke X axis : 450 [mm] Stroke Y axis : 270 [mm] Stroke Z axis : 310 [mm] Traversing feeds X, Y and Z axes : 75000 [mm/min] Max. bar diameter in turning spindle : 32 [mm] Main spindle max. speed : 8000 [rpm] Main spindle max. power : 12 [kW] Angular A axis stroke : 360 [°] A axis indexing precision : 0.001 [°] B axis swivelling stroke : -20° / +115 [°] Rjdpfx Aex U U Hbsdasn B axis indexing precision : 0.001 [°] Spindle type : HSK40 Max. spindle speed : 30000 [rpm] Tool changer magazin number of stations : 40 Part turnaround by robot (6th side machining) : Yes RS232 Interface : Yes Total power required : 17 [kVA] Supply voltage : 400 [V] Dimensions : 1500 x 2600 x 2300 [mm] Weight : 3400 [Kg] More information available upon request.

Condition: used, Year of construction: 2001, Technical data: Rodjt Hr Ahjpfx Adasn Tool holder: SK 40 Travels: X-axis: 530 mm Y-axis: 450 mm Z-axis: 450 mm Max. Tool weight: 260 kg Spindle speed: 12000 1/min Max. Table load: 380 kg Weight, approx.: 6500 kg Dimensions (DxWxH), approx.: 2000 x 2200 x 2400 mm Equipment: - Control Heidenhain TNC 430 - 4-axis from SMP (France)

Condition: new, Year of construction: 2024, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,400 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, New machine HDC3000 with 6 axes • Travel ranges: X=3000 mm, Y=1500 mm, Z=1400 mm • Heidenhain iTNC 640 with handwheel • NC rotary table for 5-sided machining 1250 mm x 1600 mm • 2-axis NC universal drilling and milling head, fully simultaneous and positioning operation • Spindle 10,000 rpm HSK100, S1=220 Nm spindle torque • Tool change system HSK100 / 60 stations – 800 mm tool length • Chip conveyor • Optimized for 5-sided machining including deep hole drilling • Coolant supply system • Internal/external air blow-off device • ICS 60 bar for deep hole machining Rodpex U Sm Eofx Adajn • Fully enclosed • Large interference circle 2300 mm • Including mounts • Including wash gun • Including warranty • Short delivery time, subject to prior sale

Condition: reconditioned (used), Year of construction: 2010, • Traveling distances X=3100 mm, Y=1950 mm, Z=1390 mm • Heidenhain iTNC 530 with handwheel HR 410 Rodpfx Aox U Sfnedaon • Machine table for multi side working 3000 mm x 1600 mm • 2-axis NC-universal milling head, for simultaneous and positioning working • Spindel 10.000 U/min HSK 100, 130 Nm Spindle torque • Tool change system HSK 100 / 40 places for 750 mm long tools • Chip conveyor (screw type) in X-axis, for transport into • Chip conveyor scraper belt type (traverse conveyor), Fabr. Knoll • Coolant container 900 l, Fabr. Knoll • Outside air at spindle • IKZ 60 bar for deep hole drilling function • Covering with safety glass pane, open at the top for loading by crane • 2 part sliding doors at the operator side • 2 part sliding doors at the front side, for easy loading • Radio-controlled measuring probe RMP 60 • incl. washing gun • incl. podiums at the front side and operator side • complete factory overhauled and painted new • short time delivery after arrangement • used machine • Y-axis ball screw in September 2021 incl. bearings renewed • X-axis new linear guiding system, July 2023 changed, renewed • Spindle overhauled at Mai 2023 (clamping system new, clamping cartridge new, rotation unit new, general tests) (at 23105 spindle hours)) • can be visited under power at 72793 Pfullingen • optional fixators • optional installation at customers plant • optional transport • 23122 spindle hours in total • 53991 machine hours in total • Year of construction 2010 Subject to prior sale

Condition: good (used), Year of construction: 2003, functionality: fully functional, 1 CNC Universal Machining Center DECKEL MAHO - DMU 50 T Year of manufacture: 2003 X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Control: Siemens 810 D Spindle speed range: 20 - 9,000 rpm Main spindle drive power: 9 / 13 kW Tool holder: ISO 40 DIN 69871 Table dimensions: 700 x 500 mm Swiveling B: 105° (-10°/+95°) manual Rotating: 360° manual Max. table load: 200 kg Number of T-slots: 7 T-slot spacing: 63 mm T-slot width: 14H7 mm Centering bore: 30H7 mm Number of tool stations: 16 positions Tool holder: ISO 40 DIN 69871 Max. tool length: 290 mm Max. tool weight: 6.0 kg Max. total tool weight: 50 kg Feed rate max.: 10,000 mm/min Rapid traverse: 12 m/min Minimum input unit: 0.01 mm Total power consumption: 17 kW Machine weight approx.: 3.2 t Space requirement approx.: 4.0 x 4.0 x 2.5 m - 5 axes (3 + 2) Redox Auvvepfx Adajn - Swivel rotary table with angle display (axes B+C manually by handwheel) Available immediately. Including tool holders and zero point clamping system.

Condition: used, Year of construction: 2005, x-travel 500 mm y-travel 450 mm z-travel 400 mm control Heidenhain iTNC 530 c-axis 360 b-axis -5/+110 ° turning speeds 20- 10000 U/min power capacity - milling spindle 13 kW tool taper SK 40 no. of workpieces in the magazine 16 Stück rapid traverse 24 m/min table surface area 630 x 500 mm table load 200 kg weight of the machine ca. 4,0 t dimensions 2,3x 3,2 x 2,75 m 3 + 2 axis Milling Center - Turn-/swiveling table full programmable - electr. hand wheel - new spindel in 2015 Rjdpfx Adow Eyg Ieaen

Condition: ready for operation (used), Travel X/Y/Z: 450mm/310mm/300mm, table dimensions X/Y: 840mm/320mm, tool stations: 12, tool holder: SK40, speed: 4000rpm. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2200mm, weight: approx. 2500kg, control: Heidenhain TNC 155. On site inspection is possible. Rsdpfxjycwq Rj Adasn

Condition: ready for operation (used), Travel X/Y/Z: 650mm/400mm/425mm, table dimensions X/Y: 545mm/540mm, max. table load: 500kg, speed: 10000rpm, tool stations: 20, rapid traverse: 30m/min, feed rate: 20m/min. Machine dimensions X/Y/Z: approx. 3400mm/2100mm/2800mm, weight: approx. 5500kg. On-site inspection is possible. Rsdpfxeycwrbe Adajn

Condition: used, Year of construction: 1996, x-travel 850 mm Rjdpfx Aeuxfz Ajdajn y-travel 630 mm z-travel 500 mm Control Heidenhain total power requirement 16 kW dimensions of the machine ca. 5 x 4,2 m

Condition: good (used), Year of construction: 2021, Matec HV 700, Year of manufacture: 2021, Heidenhain TNC 640 control system, X/Y/Z travel 2600/700/950 mm horizontal, X/Y/Z travel 2600/700/950 mm vertical, Rjdpfx Adeyctf Deaen 50-position tool changer, HSK 63 tool holder, Spindle speed up to 15,000 rpm, NC swivel milling head +/- 105°, Swivel radius 250 mm, NC rotary table Ø 750 mm, ICS 20 bar, Paper band filter, Direct measuring systems, Chip conveyor, Electronic handwheel, Dynamics package, Software Kinematics Option, Measuring probe, Partition wall, S1 approx. 2000 total spindle hours, S2 approx. 25 total spindle hours,

Condition: good (used), Year of construction: 2005, operating hours: 84,564 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 17 kVA, controller manufacturer: iTNC 530 Heidenhain, controller model: iTNC 530 Heidenhain, total height: 2,500 mm, total length: 3,000 mm, total width: 3,000 mm, table width: 500 mm, table length: 650 mm, table load: 200 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 22,855 h, spindle motor power: 13,000 W, number of slots in tool magazine: 16, tool length: 300 mm, tool diameter: 130 mm, tool weight: 6 g, Equipment: rotational speed infinitely variable, The machine is in good condition. A few things have been redone and freshened up. The following has been overhauled: -Complete X-axis bearing including ball screw and bearing -Various hydraulic components -Tool changer reset and sensors replaced -New door switch installed -New discs installed (unfortunately already got some flying chips again) -New coolant pump -New screen, as it was defective -New handwheel HR410 The machine does not have many spindle hours or switch-on hours. The machine has never seen a series production and has always been operated sensibly. Warm-up programs etc. We are tool and mold makers, so we tend to do more complex contours rather than heavy machining. I am only selling this because I need a simultaneous machine and also more travel paths. Technical data: Year of manufacture 2005 x-travel 500 mm Rodpfx Ajvtnm Hjdaen y-travel 450 mm z-travel 400 mm Control iTNC 530 Heidenhain Main spindle Speed range - main spindle 20 - 10,000 rpm Drive power - main spindle 9 / 13 kW Torque 57 / 82 Nm Tool holder SK 40 Rotary table Table clamping area 630 x 500 mm Swivel range -5 / +110 ° Max. table load 200 kg T-slots 14 H7 T-slots - distance 63 mm C-axis +/- 360 ° Feeds: Rapid traverse (X / Y / Z) 12 m/min Feed rate 10,000 mm/min Tool changer: Tool positions 16 pos. Max. tool weight 6 kg Max. tool length 300 mm Max. tool diameter 80 mm Max. tool diameter with free adjacent box 130 mm Tool holder SK 40 Total power requirement 17 kVA Machine weight approx. 3.6 t Space requirement approx. 3.0 x 3.0 x 2.5 m Tool milling machine - Universal DECKEL MAHO - DMU 50 Attention: no chip conveyor and no automatic measuring probe! - 5 axes (3+2) - WITHOUT tools Attached are pictures of the machine. The machine was intentionally not cleaned before taking the pictures, so it is in the "chip" and is used daily. You can also see the hours of the machine there. Kinematics and geometry are OK. for our needs, but could possibly be re-measured. We have never had any crashes etc.

Condition: reconditioned (used), Year of construction: 2001, Universal milling & drilling machine DECKEL MAHO DMU 50 M With control Heidenhain TNC 320 Year of construction: 2001 Travels: X 500 Y 400 Z 400 Speed range: 20 - 4,500 rpm infinitely variable With the following accessories: Manual swivel rotary table with digital display for C + B axis Rodpfsuw Sd Ijx Adajn 700 mm x 500 mm clamping surface Electronic handwheel for X , Y , Z axis Splash guard cabin Machine light 4 pcs. Height-adjustable machine shoes Coolant device Operating instructions

Condition: excellent (used), Year of construction: 2019, Delivery at the beginning of June 2026!!! Control: CELOS with Heidenhain TNC 640 Milling head: Universal milling head with controlled A-axis HSK63A Spindle options: Spindle tool holder HSK-A 63 Redsx Uqykepfx Adaon Tool magazine: Tool magazine, wheel type, 63 positions HSK63A Coolant / Chip removal: Through-spindle coolant system, 80 bar, frequency controlled; oil/emulsion mist extraction unit; cooling device with air blast Measuring / Monitoring: Heidenhain infrared probe SK 40, 3D quickSET; MPC Machine Protection Control Further options: Operating mode 4 Options for HEIDENHAIN control: Electronic handwheel Documentation: 1 set documentation in German; electrical schematic in German Display language: German

Condition: used, Year of construction: 2007, operating hours: 73,090 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 350 mm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 21 kVA, controller manufacturer: Siemens, controller model: 840D powerline, table width: 380 mm, table length: 500 mm, overall weight: 6,500 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 24,649 h, number of slots in tool magazine: 30, input voltage: 400 V, number of axes: 5, Equipment: chip conveyor, For sale is a machining center from manufacturer Deckel Maho, model DMU 50, in well-maintained and technically flawless condition. The machine has been serviced regularly and is in excellent condition both visually and mechanically. It is fully operational, tested, and ready for immediate use. Additional equipment: - Paper band filter - Coolant system With our all-inclusive package, we personally handle the complete service for you upon request – from delivery to the commissioning of your new machine. This includes unloading, placement, and alignment of the machining center. Afterwards, our experienced service technicians carry out professional commissioning, perform all necessary function tests, and ensure your machine operates reliably and precisely. Furthermore, we offer tailored training sessions for your employees so that you can maximize the potential of your machine from day one. Even after installation, we remain at your service—be it for maintenance, technical questions, or future upgrades. With our all-inclusive package you have nothing to worry about – we ensure everything runs smoothly so you can focus entirely on your production. Optionally, you can also purchase extraction systems, attachments, and accessories from us – including high-quality Donaldson extraction units – to make your production even more efficient and clean. Our service promise: Quality, expertise, and customer satisfaction are our top priorities. Our team consists of qualified and experienced technicians, specializing in Mazak machines as well as other brands. We place great value on personal support and continue to assist you even after the purchase. You are also welcome to inspect and test the machine under power at our facility at any time. We cordially invite you to visit us and see the condition and functionality of the machine for yourself. With us, you are in the best hands – professional, reliable, and passionate about machinery! Rjdsxwtp Rjpfx Adaen PS CNC Service Germany GmbH & Co. KG All information without guarantee.

Condition: excellent (used), Year of construction: 1999, operating hours: 37,300 h, functionality: fully functional, X-travel 500 mm Y-travel 400 mm Z-travel 400 mm Control: Heidenhain TNC Speed range - main spindle 20 - 9,000 rpm Drive power - main spindle 9 / 13 kW Table diameter 700 x 500 mm Swiveling B: 105° (-10°/+95°) manually Rotatable 360° manually Max. table load 200 kg Number of T-slots: 7 Centering hole 30H7 mm Number of tool positions: 16 positions Tool holder ISO 40 DIN 69871 Max. tool length 290 mm Redpowm Nqrefx Adasn Max. tool weight 6.0 kg Max. total weight 50 kg Max. feed rate 10,000 mm/min Total power requirement 17 kW Machine weight approx. 3.2 t Space requirement approx. 4.0 x 4.0 x 2.5 m

Condition: like new (used), Year of construction: 2025, functionality: fully functional, travel distance X-axis: 1,530 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 465 mm, rotary table diameter: 650 mm, spindle speed (max.): 12,000 rpm, number of spindles: 1, number of slots in tool magazine: 32, Spinner U1530 X-axis travel 1,530 mm Y-axis travel 530 mm Z-axis travel 465 mm Rotary table diameter (5th axis) 650 mm Number of tools Rodpfx Adsych Rhsasn 32 Spindle speed 12,000 rpm Prepared for automation Tool holders SK40

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: PIS 3837, travel distance X-axis: 4,500 mm, input voltage: 400 V, type of input current: three-phase, CNC Gantry Milling Machine PRATIC PIS-CNC 4500S-2W (Year 2019) CNC gantry milling machine PRATIC PIS-CNC 4500S-2W from ongoing serial production, year of manufacture 2019. The machine has been used for machining metal parts and furniture fittings and is fully functional. Application area: – Milling and drilling of aluminium and steel profiles Rjdpfx Adex Hp Nboajn – Machining long parts/profiles in series production – Ideal for fittings, metalworking, and profile processing industries Technical features (excerpt): – Gantry design with large machining area (X-axis approx. 4,500 mm) – CNC control with user-friendly interface – Sturdy machine table with clamping options for profiles and workpieces – Designed for cost-effective series production Condition / Maintenance: – Well-maintained used condition from a family-run business – Machine is currently still in use, test run can be arranged by appointment – Regularly serviced during ongoing operation – Power supply: 400 V / 50 Hz, total connected load approx. 30 kVA, rated current approx. 55 A – Technical documentation and photos available Inspection possible by appointment. Dismantling and loading can be organized by arrangement.

Condition: used, Year of construction: 2018, functionality: fully functional, overall weight: 1,400 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 2,200 W, number of spindles: 1, number of slots in tool magazine: 5, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, We offer a used CNC machining centre for aluminium and plastic profiles, Fom Industrie Adir-C, year of manufacture 2018. Swivel table -90°/0°/+90°, 4x pneumatic clamps, machine operated in single-shift mode. If you have any questions or require further information, please do not hesitate to send us a message or contact us by phone. Rsdpfjycg H Uox Adaen

Condition: like new (used), Year of construction: 2011, travel distance X-axis: 550 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 32 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, controller manufacturer: FANUC, controller model: Professional 5, workpiece height (max.): 500 mm, workpiece diameter (max.): 650 mm, workpiece weight (max.): 350 kg, total height: 3,200 mm, total length: 3,550 mm, total width: 29,000 mm, overall weight: 15,700 kg, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 323, tool length: 300 mm, tool diameter: 70 mm, tool weight: 8,000 g, CNC controller: FANUC Professional 5 Axes X-axis travel mm: 550 Y-axis travel mm: 1000 Z-axis travel mm: 500 C-axis degrees: 360 (continuous rotation) / rotary encoder A-axis degrees: 150 (+30 120º) rotary encoder Feed rates m/min: X:32; Y,Z:40; Rapid traverse m/min: X,A,C:48; Y,Y:50; A,C:18 Rsdsvfmlrepfx Adasn Worktable Table dimensions mm: 500 Maximum workpiece size (D x H) mm: 650x500 Max. workpiece weight kg: 350 Spindle Spindle speed rpm: 20000 Tool system Tool holder: HSK-A63 Tool magazine slots: 323 Tool changer: Matrix Max. Tool Diameter 70 With occupied neighboring places mm: 140 Max. Tool Length mm: 300 Max tool weight kg: 8 Equipment Electronic Handwheel Chip conveyor Helical interpolation Custom Macro common variables (100) Machine running times Spindle Working: 0h (Retrofited) Basic machine dimensions / weight Length mm: 3550 Width mm: 2900 Height mm: 3200 Weight kg: 15700

Condition: like new (used), Year of construction: 2016, functionality: fully functional, Takumi VC1052 in like-new condition, with many accessories year of manufacture 2016 Rodpfx Adjxy Nnzjajn Siemens 828D control with Shopmill auto power off X, Y, Z: 1060 x 520 x 610 mm spindle 12,000 rpm SK 40 taper through-spindle coolant 24-position tool changer chip conveyor with collection bin oil skimmer chiller 36 m/min rapid traverse electronic handwheel mist extraction filter complete documentation 2x Cuter SP150 x 250 vices 38x SK 40 tool holders set of clamping bars 3D probe complete setup ready for immediate milling and drilling machine is powered for inspection

Condition: like new (used), Year of construction: 2016, The ONIX 3300 is a CNC machining centre with 3 controlled axes + 1 additional axis, specifically designed for drilling and milling operations on aluminium, PVC, light alloy, and steel profiles with a maximum thickness of up to 3 mm. The machine offers a working capacity of 3300 mm and is equipped with an 8-position automatic tool magazine, with the possibility of housing an angular head for machining on three sides of the profile, as well as a saw blade for end milling operations. The fully enclosed structure contains the electrospindle, which provides a power of 4 kW and a rotation speed of up to 18,000 rpm, ensuring high performance and excellent machining quality. The swivelling control console, positioned on the right-hand side of the machine, allows for easy and intuitive management of programs and controls during every phase of the production cycle. The ONIX 3300 is equipped with CNC control for the axes and an industrial PC for program management, complete with a 17” LCD monitor, 80 GB hard disk, and 2 USB ports. The programming language is ISO standard, with an operator interface based on the Windows XP platform, and dedicated programming software ITALSOFT – FLY CAM CAD-CAM 3D, designed to optimize machining operations and production cycles. Technical Features • Dimensions (LxPxH): 4600x1675x2260 mm - 182x66x89 in • Dimensions for transport (LxPxH): 4500x1250x2300 mm - 177.5x50x91 in • Weight: 1500 kg - 3306 lb • Nominal power: 6 kW Redpfx Adowb D Steasn • Absorbed power: 16 A • Voltage: 400 V three phase • Frequency: 50/60 Hz • Air pressure: 7 bar • Accuracy: 0.1 mm - 0.004 in • Electrospindle power: S1 4 kW - 0/18000 rpm • Maximum torque: 3.7 Nm at 12000 rpm • Tool holder adapter: ISO 30 • Spindle cooling system: Electric fan • Operation area: 1 • Machinable sides no.: 1 (3 sides with Angle head) • Standard clamps no.: 4 (manual) • Tool magazine: 8 tool places (on board the basement) • Clamping force: 130 kg per clamp • Zero reference point no.: 1 (manual) • Spray nozzles for lubrication: 1 on the electrospindle • Tank capacity: 2.2 litres • Slides greasing: Manual • Operating temperature range: From 10 to 35 °C • Humidity: 75 % • Standard colors: RAL 7032 / RAL 5018 • Chip conveyor system: Chip conveyor plate • Machine safety: Safety light screen • Operator interface Monitor: 17” LCD • USB port: On the control panel • Software: ITALSOFT CAD-CAM

Condition: used, Year of construction: 2007, High-performance CNC machining centre equipped with a 5-axis electrospindle for advanced machining operations on aluminium, PVC, light alloys, and composite materials. Technical Description: - 5-axis electrospindle – A=+/-125°, 12 kW with cooling unit - Automatic tool changer with 18 positions + Ø400 mm blade, protected and mounted on the gantry sliding along the X-axis - Working area – travel: X = 7500 mm; Y = 1500 mm; Z = 620 mm - Milling operations with linear and circular interpolation on the X-Y-Z axes - Machining on 5 faces - PENDULAR operation capability - No. 8 pneumatic clamps with automatic positioning - No. 2 pneumatic reference stops - Tool cooling system with minimal lubrication unit Rjdpfxevgl Rce Adajn - Motorized conveyor belt for chip and scrap evacuation - CNC, user and maintenance manual, CE certification included

Condition: used, Year of construction: 2001, x-travel 2.000 mm y-travel 1.200 mm z-travel 1.400 mm Control Heidenhain 426 spindle tunring speed 3.000 U/min tool taper SK 50 number of tool places 20 Pos. In our opinion, the machine is in good used condition and can be inspected Rodjxu Nxvspfx Adaen under power by appointment. Technical Features & Accessories: - Controlled rotary table - Milling head with stepless positioning along the B-axis - Automatic tool changer with 20 magazine positions - 2x chip conveyors in longitudinal direction, ejection on the left - Coolant system - Fully enclosed - Various tools Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!