Used Universal Tool Grinder for sale (38,993)

Condition: excellent (used), max. grinding diameter 175 mm Cedpfjzxh Tmsx Albjrg

Condition: used, Year of construction: 2003, max. grinding diameter 5-50 mm grinding length 350 mm workpiece length 50-300 mm diameter 5-50 mm current capacity 70 kVA Control Siemens Sinumerik 840D weight of the machine ca. 9 t dimensions of the machine ca. 3300x2950x2400 m Power supply: 400 V/50 Hz Power: 70 kVA Fuse protection: 3X125A Conductor cross-section: 5X25 mm² Cu Workpiece diameter: ? 5-? 50 Workpiece length: 50-300 - Manual loading and unloading - External fully automatic loading device - Workpiece spindle stock fixed on grinding table Crodpfxoyan R Ns Albeg Workpiece spindle unit: Dimensions: ? 135 x 400 mm Lubrication: Permanent grease lubrication Bearing seal: With sealing air Drive: with HF motor Special mount: Junker standard collar ?75 mm Max. speed: 6000 min. -1 Tailstock: Longitudinal adjustment: manual Turning center: Junker standard collar ? 48 mm (?75 mm) Grinding table: Feed: Z-axis Grinding headstock: Feed: X-axis Horizontal swivel: B-axis HF grinding spindle unit I, II, III Dimensions: ? 165 x 350 mm Flange: ? 190 mm Standard collar: ? 127 mm Lubrication: Permanent grease lubrication Bearing seal: With sealing air Drive: 8 kW Balancing: Electronic Speed max. 8800 min -1 Grinding wheel I, II, III Type: Borazine (CBN) ceramic bonded Diameter: ? 350 mm Bore: ? 127 mm Coating width: max. 5 mm (standard) Peripheral speed: max. 140 m/s

Condition: used, Year of construction: 1984, max. grinding diameter 238 - 620 mm grinding length 190 mm workpiece length 380 - 940 mm spindle turning speed - stepless 2 - 10000 U/min current capacity 380 kVA power capacity - grinding motor 1,1 kW total power requirement 2,2 kW Crodpfxsw U Eg De Albeg DECKEL S 11 TOOL GRINDING MACHINE - UNIVERSAL 465 / 84 380 V, 50 Hz Colour: green !!! Original paint !!! ! Machine is in conditon from seller ! motorised height adjustment, axial grinding spindle adjustment Accessories: * Dividing head Sk 40 with dividing disc 24 R with mounting points for optics * Dust extraction device without suction cup * Protective cover * 3 pcs. transport lugs * 1 set of technical sanding instructions * Operating key, operating instructions, spare parts list, wiring diagram

Condition: new, Year of construction: 2025, max. grinding diameter 238 - 620 mm grinding length 190 mm workpiece length 380 - 940 mm current capacity 380 kVA power capacity - grinding motor 1,1 kW speeds of grinding spindle 2 - 10.000 U/min total power requirement 2,2 kW !!! We have almost all spare parts for Deckel S 11 machines in stock !!! * Machine and accessories overhaul year of construction 2025 with CE marking DECKEL S 11 TOOL GRINDING MACHINE - UNIVERSAL 400 V, 50 Hz, with CEE plug and cable Color: 2 K new paint Cedpfow U Eh Usx Alberg Stand RAL 7005 mouse gray Body and accessories RAL 7035 light gray Motorized height adjustment, axial grinding spindle adjustment * Complete electrical conversion includes: > Fi circuit breaker > New three-phase drive > new brake motor > new frequency control > new touch-safe built-in electrics > EMC cable glands > EMC cables > new protective hoses > Emergency stop switch > New control panel * Machine stand milled + ground, new support plate Basic equipment: - LED light Waldmann - Suction without a vacuum cleaner - Protective cover for grinding wheels up to Ø 125 mm - Set of technical information - Abrasive wheel holder 51 mm - Set of suspension devices for transport - 5 adjusting screws Accessories: * Video measuring system with CCD camera and image processing software with new measuring cross slide New RSF scales on the measuring cross slide and on the machine machine axes up and across (4 axes) incl. complete mounting and adjustment * universal index head Sk 40 with dividing disc 24 R with mounting points foroptics * Operating key, operating instructions, spare parts list, circuit diagram * Technical grinding instructions * Machine and accessories overhauled and with electrical acceptance certificate * abroad 6-month warranty We will gladly accept your used Deckel S 11 as a trade-in - please contact us! !!! Accessories can be varied as required !!! Pictures include special accessories

Condition: used, Year of construction: 2002, max. grinding diameter 238 - 620 mm grinding length 190 mm workpiece length - 940 mm spindle turning speed - stepless 2 - 10000 U/min current capacity kVA power capacity - grinding motor 1,1 kW total power requirement 2,2 kW DECKEL S 11 TOOL GRINDING MACHINE - UNIVERSAL Credpfxew U Ehnj Albog 2178 / V, 50 Hz, with CEE plug and cable !! Original paint !!! ! Machine is in delivery condition, depending on customer request the machine can be overhauled ! motorised height adjustment, axial grinding spindle adjustment Accessories: * Dividing head Sk 40 with dividing disc 24 R with mounting points for optics* * Dust extraction device without suction cup * Halogen lamp * Protective cover * 3 pcs. transport lugs * 1 set of technical sanding instructions * Operating key, operating instructions, spare parts list, wiring diagram

Condition: like new (used), Year of construction: 2002, operating hours: 500 h, functionality: fully functional, max. grinding diameter 238 - 620 mm grinding length 190 mm workpiece length 380 - 940 mm spindle turning speed - stepless 2 - 12000 U/min current capacity 380 kVA power capacity - grinding motor 1,1 kW total power requirement 2,2 kW weight of the machine ca. 0,6 t !!! We have almost all spare parts for the Deckel S 11 machines in stock !!! !!! Accessories can be varied as desired !!! We would be happy to trade in your used Deckel S 11 - contact us! 2189 400 V, 50 Hz, with CEE plug and cable Crjdow U Eg Rspfx Albjg Colour: body pastel turquoise RAL 6034 Stand blue-grey RAL 7031 Motorized height adjustment, axial grinding spindle adjustment Machine like new !! * Accesories: * Sk ??40 dividing head with 24 R dividing disc * Graduated disc 20 R * Tightening screw M 16 69871 * Spiral and relief grinding device with rack housing * Counter bearing with 4 tailstock centres * Center point with driver * Dressing device * Dressing diamond * Radius grinding device SK 40 complete with setting gauge * Steel holder for ditto * Support fingers with sliding blades * Support finger holder * Complete dust extraction without suction * Halogen light * Tooth support complete * Setting gauge * Plier sleeve and jacking nut and wrench * 35 collets 1.0 - 18.0 mm increasing by 0.5 mm * 1 set of SK 40 direct collets 6, 8, 10, 12, 14, 16, 18, 2, 22, 25 mm * 6 jaw grinding chuck * 3 taper reducing sleeves Sk 40 x Mk 1, 2, 3, 4 * clamping nut * 20 grinding wheel chucks * 2 protective hoods * various diamond/borazon discs * Instruction Manual & Keys, Parts List, Wiring Diagram * Complete set of grinding instructions Machine is partially overhauled and with electrical acceptance report! !! Various measuring optics (new or used) with measuring cross sled available !!

Condition: used, Year of construction: 1989, functionality: fully functional, grinding wheel diameter: 125 mm, overall weight: 520 kg, collet bore: 25 mm, grinding spindle speed: 500 rpm, power: 1.1 kW (1.50 HP), input current: 20 A, input frequency: 50 Hz, year of last overhaul: 2021, Equipment: rotational speed infinitely variable, max. grinding diameter 238 - 620 mm grinding length 190 mm workpiece length 380 - 940 mm spindle turning speed - stepless 2 - 10000 U/min current capacity 380 kVA power capacity - grinding motor 1,1 kW total power requirement 2,2 kW weight of the machine ca. 0,6 t !!! We have almost all spare parts for the Deckel S 11 machines in stock !!! !!! Accessories can be varied as desired !!! We would be happy to trade in your used Deckel S 11 - contact us! Notice: We would be happy to provide you with a free offer. However, please understand that we only accept inquiries with a complete address edit. 1218 400 V, 50 Hz, with CEE plug and cable Colour: light grey RAL 7035 Stand traffic grey RAL 7042 (new paint) axial grinding spindle adjustment Crjdpfx Aew U Ehzslbeg Accessories: * Machine stand and carrier plate ground * Complete electrical conversion included: > new three-phase drive > new brake motor > new frequency controller > new built-in electrics touch-proof > Fi circuit breaker > EMC cables and screwed connections > new protective cables > new control panel > Emergency stop switch * Opto electronic measuring device with microscope, support arm, parking space, new 2-axis Fagor digital readout and scales completely mounted and adjusted * dividing head Sk 40 with prisms and 24 R dividing disc * 1 graduated disc 14 + 22 R each * Twist and back-grinding device with rack and pinion housing * Setting gauge * Complete tooth support * pivoting support finger * LED lamp waldmann * Dust extraction device without vacuum cleaner * Univ. adjustment gauge * 10 direct collets Sk 40 6/ 8/ 10/ 12/ 14/ 16/ 18/ 20 22/ 25 mm * Collet sleeve with forcing nut * 1 set = 35 collets S 20x2 from 1.0 - 18.0 mm by 0.5 mm each * 1 taper reducing sleeve Sk 40 x Mk 1/ 2/ 3/ 4 * 3 grinding wheel chuck L 48, 35 mm * Protective cover * Exchange grinding spindle * Tool cabinet with 4 drawers * Shelves for dto. * Operating key, operating instructions, spare parts list, circuit diagram * Machine and accessories completely overhauled and with electrical test certificate!* 6 months warranty !

Condition: excellent (used), Year of construction: 2016, operating hours: 200 h, functionality: fully functional, total height: 1,760 mm, total length: 1,100 mm, total width: 850 mm, workpiece weight (max.): 12 kg, spindle speed (max.): 10,000 rpm, spindle speed (min.): 500 rpm, feed length X-axis: 100 mm, feed length Y-axis: 190 mm, feed length Z-axis: 325 mm, type of input current: three-phase, grinding wheel diameter: 125 mm, overall weight: 520 kg, grinding length: 270 mm, rotational speed (min.): 500 rpm, rotational speed (max.): 10,000 rpm, center height in crank: 220 mm, center height: 300 mm, collet bore: 25 mm, grinding spindle speed: 10,000 rpm, feed rate X-axis: 1 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 1 m/min, pivoting range: 360 °, travel distance X-axis: 100 mm, travel distance Y-axis: 190 mm, travel distance Z-axis: 325 mm, center width: 620 mm, grinding spindle motor power: 1,100 W, table length: 190 mm, table width: 200 mm, table height: 1,020 mm, power: 1.1 kW (1.50 HP), height adjustment type: electric, workpiece diameter (max.): 400 mm, input current: 20 A, grinding diameter: 300 mm, input frequency: 50 Hz, disc diameter: 125 mm, input voltage: 280 V, space requirement width: 2,000 mm, space requirement length: 1,800 mm, space requirement height: 1,800 mm, grinding wheel speed: 10,000 rpm, year of last overhaul: 2022, distance table to spindle center: 325 mm, tool diameter: 300 mm, workpiece length between centers: 270 mm, distance between centers: 270 mm, number of spindles: 1, Equipment: rotational speed infinitely variable, max. grinding diameter 238 - 620 mm grinding length 190 mm workpiece length 380 - 940 mm spindle turning speed - stepless 2 - 12000 U/min current capacity 380 kVA power capacity - grinding motor 1,1 kW total power requirement 2,2 kW weight of the machine ca. 0,6 t !!! We have almost all spare parts for the Deckel S 11 machines in stock !!! !!! Accessories can be varied as desired !!! We would be happy to trade in your used Deckel S 11 - contact us! 2016 S25 003004 V, 50/60 Hz, with CEE plug and cable Credpfx Alsw U Ehbebog Color: light gray motorized height adjustment, axial grinding spindle adjustment Equipment: * Opto-electronic measuring device with measuring electronics Image processing, PC (Original ISOG) * CCD camera and monitor * Dividing head Sk 40 with dividing disk 24 R * 1 dividing disk each 14, 16, 18 * Tightening screw M 16 * Counter bearing complete with 4 center punch points * Center point Sk 40 with driver * Twist-u. Relief grinding device with rack housing * Dust extraction completely without vacuum cleaner * LED machine light * Tooth support complete with support and sliding blades * Setting gauge * Universal setting gauge * Handwheel facility * Dressing device with 3 diamonds * 1 set of collets 1.0 - 17.5 mm by 0.5 mm rising * Pliers sleeve and extraction nut and key * 10 pieces of direct collets Sk 40 6 - 25 mm * 4 cone reducing sleeves Sk 40 x Mk 1, 2, 3, 4 * Clamping nut * 12 grinding wheel chucks * Tool cabinet with shelves * 2 protective hoods * various diamond / borazon discs * Operating instructions and key, spare parts list, circuit diagram * Set of technical grinding instructions ##### Machine is partially overhauled and has an electrical acceptance report!#####

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, total height: 1,760 mm, total length: 1,100 mm, total width: 850 mm, workpiece weight (max.): 12 kg, spindle speed (max.): 10,000 rpm, spindle speed (min.): 500 rpm, type of input current: three-phase, grinding wheel diameter: 125 mm, overall weight: 520 kg, grinding length: 190 mm, rotational speed (min.): 500 rpm, rotational speed (max.): 10,000 rpm, center height in crank: 220 mm, center height: 330 mm, collet bore: 25 mm, grinding spindle speed: 10,000 rpm, feed rate Z-axis: 1 m/min, pivoting range: 360 °, travel distance X-axis: 100 mm, travel distance Y-axis: 190 mm, travel distance Z-axis: 325 mm, center width: 620 mm, grinding spindle motor power: 1,100 W, table length: 500 mm, table width: 180 mm, table height: 1,020 mm, power: 2 kW (2.72 HP), height adjustment type: electric, workpiece diameter (max.): 620 mm, input current: 20 A, grinding diameter: 130 mm, input frequency: 50 Hz, disc diameter: 125 mm, input voltage: 360 V, space requirement width: 2,000 mm, space requirement length: 1,800 mm, space requirement height: 1,800 mm, grinding wheel speed: 10,000 rpm, year of last overhaul: 2025, warranty duration: 12 months, distance table to spindle center: 325 mm, tool diameter: 400 mm, workpiece length between centers: 270 mm, distance between centers: 300 mm, surfacing fence height: 190 mm, Equipment: rotational speed infinitely variable, max. grinding diameter 238 - 620 mm grinding length 190 mm workpiece length 380 - 940 mm current capacity 380 kVA power capacity - grinding motor 1,1 kW speeds of grinding spindle 2 - 10.000 U/min total power requirement 2,2 kW !!! We have almost all spare parts for the Deckel S 11 machines in stock !!! !!! Accessories can be varied as desired !!! We would be happy to trade in your used Deckel S 11 - contact us! * Machine and accessories completely overhauled with CE marking 400 V, 50 Hz, with CEE plug and cable BASICMACHINE!!! overhauled in 2023 Color: 2 K repainting Stand RAL 7005 mouse gray Structure and accessories RAL 7035 light gray motorized height adjustment, axial grinding spindle adjustment * Complete electrical conversion includes: > Fi circuit breaker > new three-phase drive > new brake motor > new frequency regulation > new touch-safe built-in electronics > EMV screw connections > EMV cables > new protective tubes > Emergency stop switch > new control panel * Machine stand milled + ground, new carrier plate Basic equipment: - LED light Waldmann Cedpfsw U Ehhsx Albsrg - Suction without a vacuum cleaner - Protective cover for grinding wheels up to Ø 125 mm - Set of technical information - Abrasive wheel holder 51 mm - Set of suspension devices for transport - 5 adjusting screws * Operating key, operating instructions, spare parts list, circuit diagram * technical grinding instructions * CE-documents * Machine and accessories overhauled and with electrical acceptance report * abroad 6 months warranty

Condition: used, Year of construction: 2002, operating hours: 500 h, functionality: fully functional, max. grinding diameter 238 - 620 mm grinding length 190 mm workpiece length 380 - 940 mm spindle turning speed - stepless 2 - 12000 U/min current capacity 380 kVA power capacity - grinding motor 1,1 kW total power requirement 2,2 kW weight of the machine ca. 0,6 t !!! We have almost all spare parts for the Deckel S 11 machines in stock !!! !!! Accessories can be varied as desired !!! We would be happy to trade in your used Deckel S 11 - contact us! 2189 400 V, 50 Hz, with CEE plug and cable Colour: body pastel turquoise RAL 6034 Stand blue-grey RAL 7031 Motorized height adjustment, axial grinding spindle adjustment Machine like new !! Crodpfx Alsw U Eh Iebjg * Accesories: * Sk ??40 dividing head with 24 R dividing disc * Graduated disc 20 R * Tightening screw M 16 69871 * Spiral and relief grinding device with rack housing * Counter bearing with 4 tailstock centres * Center point with driver * Dressing device * Dressing diamond * Radius grinding device SK 40 complete with setting gauge * Steel holder for ditto * Support fingers with sliding blades * Support finger holder * Complete dust extraction without suction * Halogen light * Tooth support complete * Setting gauge * Plier sleeve and jacking nut and wrench * 35 collets 1.0 - 18.0 mm increasing by 0.5 mm * 1 set of SK 40 direct collets 6, 8, 10, 12, 14, 16, 18, 2, 22, 25 mm * 6 jaw grinding chuck * 3 taper reducing sleeves Sk 40 x Mk 1, 2, 3, 4 * clamping nut * 20 grinding wheel chucks * 2 protective hoods * various diamond/borazon discs * Instruction Manual & Keys, Parts List, Wiring Diagram * Complete set of grinding instructions ##### Machine is partially overhauled and with electrical acceptance report! ##### !! Various measuring optics (new or used) with measuring cross sled available !!

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: DC, total width: 550 mm, total length: 460 mm, total height: 490 mm, input voltage: 230 V, grinding wheel diameter: 100 mm, overall weight: 51 kg, input frequency: 50 Hz, warranty duration: 12 months, power: 0.375 kW (0.51 HP), spindle speed (max.): 5,300 rpm, For grinding HSS and carbide engraving cutters, as well as cutters with one or more lips in different shapes, such as radius cutters or negative taper angle of cutters. The universal index head is provided at 24 positions so that any particular shape angle can be obtained, a free rotation of 360° or 10° is allowed for grinding finger milling cutters, rotary drill, lathe. Tool, only replace the attachment to the index head without complicated assembly. Standard accessories 3 collets: Ø4, Ø6, Ø8 mm Grinding disc ×1 Spiral drill grinding attachment ×1 End mill grinding attachment ×1 Rotary tool grinding attachment ×1 Option collets: Ø3,Ø1/8, Ø5, Ø9, Ø10, Ø12, Ø14, Ø16, Ø18 mm Max. capacity of collet Ø3 - Ø18mm Max. grinding diameter Ø18mm Conical angle 0~180 ° Relief angle 0~45 ° Negative angle 0~25 ° Speed 5300 o/min Grinding disc Ø100 x 50 x Ø20mm Motor 375W Dimensions 550 x 460 x 490 mm Weight 51 kg Cjdpoq E Ry Hjfx Albsrg

Condition: used, Year of construction: 1995, machine/vehicle number: UWIIA/3472/95, max. grinding diameter:300 mm grinding length:400 mm workpiece length:520 mm centre height:150 mm :550 mm table speed -stepless-:0,005 - 5,0 m/min centre distance:350 mm Cjdpscxxrfjfx Albjrg :250/3750/5000/7500 U/min max. dia. of grinding wheel:250 mm grinding spindle head - swivable:11-60 ° drive capacity - spindle motor:max 3,0 kW total power requirement:7,7 kW with SIEMENS 810 G3 CNC control, electric hand wheel and spindle pitch-correction unit, FORKART OVERZ-BR hydraulic collet chuck, coolant device, automatic central lubrication, encasement with movable observation window at operator's station, separate electrical cabinet, machine light, SIEMENS servo drives, very good condition

Condition: good (used), Please refer to the images for all technical specifications. Transport and loading can be arranged throughout Europe for an additional charge upon request. Prices are subject to VAT. Viewing is possible by appointment. Contact us—our team looks forward to assisting you. Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MUCH MORE. Do you need a high-quality yet affordable machine for your production? Or are you looking to sell yours? For further information or contact options, please reach us via the contact form. Csdpfxszvnnfj Albjrg

Condition: used, Technical details: grinding length: - mm centre height over plate: - mm long. travel of table: 250 mm cross travel of table: 160 mm grinding spindle - swivable: ja ° adjustment of spindle-head: 160 mm grinding wheel speeds: 2850 U/min grinding diameter: 150 mm work table:: 50 x 134 x 44 mm table movement: X= 260 mm table movement: Y= 160 mm dimensions of grinding wheel: Bohrung Ø 20 mm voltage: 380 V / Hz machine weight approx.: 113 kg dimension machine approx.LxWxH: 0,63 x 0,56 x 0,64 m Grinding machine for twist drill cutting angle 30° / 40° Cjdeu Ng N Aspfx Alborg Hole of the grinding disc Ø 20mm Adjustment path Z = 230mm manual Headstock can be swivelled 360° via radial scale Table with clamping support LxW: 270 x 100mm for clearance angle 40° and 90°, 3x clamping devices, prism 14mm, as well as test device with 12mm prism and magnifying glass 90mm adjustable Column rotatable 360° Grinding protection 2x 220V sockets *

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 6043, Year 2007 with Fanuc Series 16Oi Country of origin: CH Voltage: 3x400V/50Hz Dimensions: 216x160x216 cm Net machine weight: 3200 kg TECHNICAL SPECIFICATIONS X-axis: 300 mm Y-axis: 220 mm Z-axis: 180 mm Resolution: 0.0001 mm Clamping capacity: 0.5 – 20 mm Grinding wheel diameter: 0.1 – 16 mm Maximum clamping length: 270 mm Grinding wheel diameter: 150 mm A-axis (grinding wheel rotation): -195 / +30° B-axis (grinding head rotation): -75 / +135° C-axis (spindle indexing): 0.001° W-axis: 620 mm U-axis: 500 mm Grinding wheel speeds, continuous: from 2000 min-1 to 7200 min-1 Spindle power: 7 kW Fire extinguishing system – CO₂ Kraft & Bauer – Not verified and no guarantee of functionality. To be serviced by you. Cedpfozxz R Eox Albjrg Unless otherwise indicated, the technical data is provided without any commitment.

Condition: good (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: FAF19SCULPTOR, grinding spindle motor power: 1,500 W, input current: 4 A, The Schneeberger Sculptor is a Swiss high-precision profile grinding machine, specifically designed for the sharpening and manufacturing of tools. The machine is fully operational and available for testing. It comes with a comprehensive set of accessories and parts. Cedpeyk S Rnsfx Albsrg

Condition: like new (used), Tool and cutter grinder GRIFO model U10 Crodpfx Asinbilolbeg

Condition: excellent (used), *UNIVERSAL AVYAC AU GRINDER - With R. VASSAL variable speed drive* Universal AVYAC AU grinder, pedestal model, French made. Cross table, adjustable grinding wheel head, tool holder, electronic variable speed drive by R. VASSAL (right/left rotation + speed adjustment). For sharpening milling cutters, drills, reamers, and tools. Csdpfx Alezxhggsbjrg 380V Three-phase – In good condition. Video available upon request.

Condition: not inspected (used), For sale due to lack of use: 2 Rollomatic grinding machines! CNC 24F3, CNC 24 FJ Crodpfxsyxwyls Albeg

Condition: not inspected (used), Type: DO 25 - 0.55 kW - 2,800 rpm - 220/380 V Csdpfx Aoza Dk Eolbsrg

Condition: excellent (used), Year of construction: 2006, functionality: unexamined, overall weight: 8,000 kg, JUNKERS FLUTEMAT: a CNC machine for highly flexible groove grinding. The FLUTEMAT is the perfect machine for creating grooves in various tool types. For example: • Application: Grinding 3 or 4 chip and flute grooves in HSS taps, milling cutters, and reamers. • Workpiece diameter: Diameter from 2 to 16 mm. • Clamping system: The thread tool is precisely fixed in a square clamping device and the tailstock center. • In-process dressing: A CNC-controlled dressing unit is located directly behind the grinding spindle. • Enormous speed: a cycle time of approx. 75 seconds for an M12 HSS tap. • Design: The machine features a vibration-damping machine bed made of mineral cast. • Control: Modern control technology via the company's own Erwin Junker Operator Panel (EJ-OP). • Grinding media: Extremely durable CBN or diamond grinding wheels are used. • Manufacturer: Erwin Junker Maschinenfabrik GmbH • Model: FLUTEMAT • Year of manufacture: e.g. 2006 • Control: CNC Junker Operator Panel, e.g. Siemens Sinumerik • Workpiece diameter range: approx. 2 – 16 mm • Total workpiece length: Max. e.g. 150 mm • Number of grooves: 3- or 4-groove tools (straight and helical grooves) • Grinding spindle drive: e.g. 7.5 kW / 11 kW • Grinding media: Designed for CBN and diamond grinding wheels • Dressing unit: Integrated, CNC-controlled in-process dressing unit • Machine bed: Vibration-damping mineral cast • Included accessories: Oil mist extraction, • Coolant system • Robot cell with various clamping tables, • Various grinding wheel flanges, • Documentation/manuals. For more information? For example, a VIDEO is available upon request by email. Credpfxjzya Hhs Albog

Condition: used, Year of construction: 1999, x-travel 290 mm y-travel 170 mm z-travel 310 mm table surface area 600 x 210 mm Crodpfx Aewngkrjlbog spindle taper SK 40 spindle turning speed range 50 - 2600 U/min feeds 9 - 450 mm/min quill stroke 70 mm dimensions of machine L x W x H 1,35 x 1,05 x 1,63 m total power requirement 5,5 kW weight of the machine ca. 720 kg - machine out of teaching shop - Accessories: solid table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, various tool fixtures, coolant

Condition: used, Year of construction: 2000, x-travel 600 mm y-travel 400 mm z-travel 400 mm table surface area 800 x 400 mm spindle taper SK 40 control HEIDENHAIN TNC 310 spindle turning speed range 10 - 3150 U/min Credpfxsux Agio Albsg spindle drive 5,5 kW feed - longitudinal/cross 1 - 5000 mm/min feeds vertical mm/min rapid traverse 6 / 6 / 3 m/min total power requirement 10 kVA weight of the machine ca. 2,5 t dimensions of machine L x W x H 2,16 x 1,70 x 2,0 m Accessories: solid table, vertical head with hydr. tool clamping and quill retraction, electron. handwheel, coolant

Condition: good (used), Year of construction: 2003, functionality: fully functional, SAACKE UWIE – 5-axis CNC tool grinder, year 2003 We offer for sale a universal SAACKE UWIE CNC tool grinder, designed for the production and sharpening of rotary cutting tools. The machine is particularly suitable for grinding and sharpening milling cutters, drills, stepped tools, shaped tools, and other precision rotary tools. Technical data: Manufacturer: Gebr. Saacke GmbH & Co., Germany Type: UWIE Serial number: UWIE/209804 Year of manufacture: 2003 Design: CNC tool grinder Codpjzx Uu Dsfx Alberg CNC-controlled axes: 5 axes Power supply: 400 V / 3 AC / 50 Hz Rated machine power: 20.5 kW Rated current: 36 A Fuse rating: 50 A PC/CNC control with monitor, keyboard, and mouse CNC rotary work spindle Multi-axis tool grinding ELBARON dust extraction system The machine is designed for precise CNC grinding and sharpening of tools and enables complex machining of tool geometries in a single setup. Inspection and testing of the machine in operation are possible.

Condition: excellent (used), Year of construction: 2003, Tool holder, vertical + horizontal SK 40 Table size L x W 710 x 315 mm Speed range, vertical spindle 63 – 2500 rpm Speed range, horizontal spindle 45 – 1800 rpm Travel ranges: X-axis, longitudinal adjustment, automatic / manual 400 / 420 mm Y-axis, cross adjustment, automatic / manual 220 / 228 mm + cross slide 375 mm Z-axis, vertical adjustment, automatic / manual 350 / 380 mm Adjustment of the quill, vertical, manual 80 mm Machine dimensions, approx. 1550 x 1620 x 1850 mm Machine weight, approx. 1300 kg Accessories / Special features: • 3-axis digital display, manufacturer HEIDENHAIN • Infinitely variable feeds with rapid traverse in the 2nd feed stage • Two working spindles for horizontal and vertical tool holders (vertical milling head does not need to be removed during machining when the horizontal spindle is in use) • Ball screw spindles for the X and Y axes, simultaneous milling in X and Y direction possible • Trapezoidal screw spindle, hardened and ground, for the Z axis (vertical) • All operating elements on one side, in the mobile control panel • Additional manual adjustment of the cross slide increases the working area of the machine, even beyond the table surface • Safety handwheels • Tool holder according to DIN 2080 – steep taper ISO 40 • Automatic central lubrication for speed and feed gears • Vertical milling head with quill, swiveling L+R • Fixed angle table 315 x 710 with 5 slots 12 mm, spacing 63 mm • Tool clamping spindles, horizontal and vertical • Splash guard made of Plexiglas on 3 sides of the horizontal table • Coolant system • CE compliant TOP condition! Csdpsziutzefx Alberg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany