Condition: used, Year of construction: 2009, functionality: fully functional, torque: 12,000 Nm, workpiece length (max.): 5,500 mm, workpiece width (max.): 170 mm, workpiece height (max.): 200 mm, total height: 2,000 mm, total length: 8,000 mm, total width: 1,800 mm, table length: 6,400 mm, overall weight: 1,800 kg, number of slots in tool magazine: 12, type of input current: three-phase, Stroj u urednom stanju, spreman za rad. Za više informacija, kontakt . Hvala. Fgodpfx Adszi Ukao Ijd

Condition: used, Year of construction: 2012, x-travel 800 mm y-travel 800 mm Fsdpfx Asyzt Dlsd Iegd z-travel 600 mm Control Heidenhain iTNC 530 spindle tunring speed 30 - 8.000 U/min spindle drive 25 kW torque 244 Nm tool taper SK 40 number of tool places 30+190 Pos. A-axis ° C-Axis 360 ° table surface area 800 x 630 mm table load 600 kg rapid traverse ( x / y / z ) 40 m/min auto power on hours ca. 79.968 h spindle hours ca. 800 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. The spindle has been overhauled. Technical Features & Accessories: - Additional magazine - Chip conveyor - Infinitely variable speed control - 5-axis simultaneous machining - 70 bar internal coolant supply - Flushing nozzle - Workpiece measuring probe - Blum laser tool control - Heidenhain 410 electronic handwheel Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 1998, x-travel 0500 mm y-travel 400 mm z-travel 400 mm table surface area 700 x 500 mm Fgjdpfx Adszhxi Dj Ijd tool taper 40 SK/ISO spindle turning speed range 20- 4500 U/min feeds 5000 mm/min spindle motor 12 kW total power requirement 13 kW weight of the machine ca. 2,8 t dimensions of the machine ca. 3 x 2 x 2 m Table could be rotated and swiveled manually with digital readout in C- and B- axe over control panel. Control: Heidenhain TNC 124.

Condition: used, Year of construction: 2000, functionality: fully functional, operating hours: 32,590 h, spindle speed (max.): 12,000 rpm, Equipment: documentation/manual, Operating hours: 14,150 hours Power on hours: 32,590 hours Sensor cable and motor for tool changer – new Price upon request Fgedpfx Asu Ut A Dod Ijd Various tools available; if interested, we will gladly send you pictures and a quote. Packaged for shipping.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, For technical specifications, please refer to the images. Fodjzhuwqepfx Ad Iogd Available starting in early October 2026.

Condition: used, Year of construction: 2008, x-travel 800 mm y-travel 800 mm z-travel 800 mm control Sinumerik 840D spindle turning speed - stepless 20 - 18.000 U/min Fgsdpfx Ajwiii Hjd Iod power capacity at 40 % load 28,00 kW power capacity at 100 % load 19,00 kW max. torque on the spindle 121 / 82 Nm spindle taper HSK-A63 B-axis -10 - +180 ° c-axis 360 x 0,001 ° feed X/Y/Z-axis 20 - 10.000 mm/min rapid traverse X/Y/Z 60,00 m/min feed B-axis 1 - 10.800 °/min rapid traverse B-axis 30,00 U/min size of pallet 800 x 630 mm max. workpiece diameter 800 mm workpiece height max. 1.330 mm table load 1,20 t toolpiece magazine: chain magazine 180 Stück tool diameter 80 mm tool diameter with 2 vacant positions 160 mm tool length - max. 450 mm weight of tools max. 15,00 kg total power requirement 57,00 kW weight of the machine ca. 22,00 t dimensions of the machine ca. 8,50 x 5,50 x H3,80 m 5-axis-machining center with SIEMENS Sinumerik 840D powerline control, RS4 pallet-storage, chip conveyor, coolant system with temperature control, coolant through the spindle 40-80 bar infinitely variable via M function, air through the spindle, tool cone cleaning device, exhauster, mechanical tool breakage control, Renishaw workpiece measurement(without probe), electronic handwheel. Machine without pallets!!!

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 665001, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 450 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, workpiece weight (max.): 2,000 kg, total height: 2,300 mm, total length: 3,300 mm, total width: 2,300 mm, table width: 700 mm, table length: 850 mm, table load: 2,000 kg, overall weight: 7,700 kg, spindle speed (min.): 3,000 rpm, spindle speed (max.): 40,000 rpm, number of slots in tool magazine: 40, Equipment: documentation/manual, OPS INGERSOLL OPS 650 CNC machining center - Table T-slot quantity: 5 Fedpfsy Tu Ddjx Ad Iogd - T-slot dimensions: 18H12 - Distance HSK tool holder – table: 550 mm - Main spindle tool holder: HSK-E 40 - Positioning accuracy TP according to DIN ISO 230-2: 0.005 mm - Repeatability: 0.002 mm - For further technical data, see the photographed data sheet. - With technical documentation - With workbench and accessories, including HSK-E 40 tool holders, equipped with tools - Workbench dimensions: approx. 1500 x 900 x 1100 mm Note: The item must be picked up between July 21st and 23rd, 2026, on a date to be confirmed. FCA D-80339 Munich - loaded onto a truck.

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 655118, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, nominal power (apparent): 38 kVA, total height: 2,300 mm, total length: 3,300 mm, total width: 2,200 mm, overall weight: 7,200 kg, spindle speed (max.): 42,000 rpm, input voltage: 400 V, Equipment: documentation/manual, OPS INGERSOLL SPEED HAWK 550 CNC machining center (5-axis) - Distance between HSK-E tool holder and table: 450 mm - Swivel angle of A-axis: -120°/+60° - Swivel angle of C-axis: n x 360° Fedpfx Ajy Tutljd Ijgd - Tool holder: HSK-E 40 - Clamping surface with 4th and 5th axis: Pallet dimensions: approx. 300 x 300 mm - Maximum travel speed: 30 m/min - Repeatability: 0.002 mm - Digital display: 0.001 or 0.0001 mm (selectable) - For further technical data, see the photographed images - Includes technical documentation - Includes three spare pallets - Note: Specific fixtures have been attached to the pallets - Includes HSK-E 40 tool holders Attention: The item must be collected between July 21st and July 23rd, 2026, on a date to be agreed upon. FCA D-80339 Munich - loaded onto a truck.

Condition: ready for operation (used), Year of construction: 2001, A CNC vertical machining center Quick Jet is offered. Travel X/Y/Z: approx. 1200mm/800mm/700mm, spindle taper: HSK-A80, max. spindle speed: 14000rpm, spindle power: 25kW, spindle torque: 170Nm, tool magazine: 16, max. tool length: approx. 300mm, max. tool diameter: 100mm, max. tool weight: 7kg, rapid traverse X/Y/Z: 24m/min, distance between table surface and spindle nose: 100mm-800mm, table size X/Y: 1350mm/1300mm, max. workpiece weight: 8000kg, control: Heidenhain TNC 530. Including HSK-A80 tool holder inventory. Machine dimensions X/Y/Z: approx. 3335mm/2780mm/3595mm, weight: approx. 11050kg. Inspection possible by appointment. Fodpfjzi Eh Ajx Ad Iegd

Condition: good (used), Year of construction: 2012, Universal machining center Machine type: DMG DMC 80 U duoBlock RS5 Control: Siemens 840D solutionline Year: 2012 SPECIFICATIONS Travel X-Axis: 800 mm Y-Axis: 1.050 mm Z-Axis: 800 mm B-Axes C-Axis Spindle speeds: 8.000 rpm Transmission ratio Spindle power: 28 / 19 kW Tool: SK 50 Toolchanger Tool capacity: 240 Palett system: RS 5 Amount of paletts: 7 Palett size: 800 x 630 mm Equipment Chip conveyor Fodpfozi D Aljx Ad Isgd Internal cooling: 40 bar Cooling tank: 980 l Caliper: vorbereitet Tool breakage detection 3D quickset Chip rinsing pistol Working mode: 4 DMG MORI Netservice

Condition: good (used), Year of construction: 2005, Universal machining center Machine type: DMG DMU 50 Evo linear Control: Heidenhain iTNC 530 Year: 2005 SPECIFICATIONS 5-axis-simultaneous Travel X-Axis: 500 mm Y-Axis: 450 mm Z-Axis: 400 mm B-Axes: 108° C-Axis: 360° Rapid motion: (X/Y/Z): 80 / 50 / 50 m/min. Amount of controlled axes: 5 Spindle speeds: 18.000 rpm Tool: SK 40 Toolchanger Tool capacity: 30 NC-panning and rotary Table Table size: 500 x 380 mm Power consumption: 52 kVA KW Machine weight: 6,5 kg Req. space (LxBxH): 5,4 x 6,5 m Equipment No cooling through spindle No chip conveyor: Spänewanne Fgjdpfszi Dzhox Ad Ijd Caliper Working mode: 4

Condition: good (used), Year of construction: 2007, Universal machining center Machine type: DMG DMC 60 T RS 3 Control: Siemens 840 D Year: 2007 new spindle: 2025 Neue B-Achslager Geometrieprotokoll vorhanden Neue Scheibe Neuer Klemmring SPECIFICATIONS 5-axis-simultaneous Travel X-Axis: 780 mm Y-Axis: 560 mm Z-Axis: 560 mm B-Axes: ° C-Axis Fgjdpfx Ajzi Dy Rsd Ijd Panning head Spindle speeds: 12.000 rpm Tool: SK 40 Toolchanger: Kettenmagazin / chain magazine Tool capacity: 180 Tool lenght: 315 mm NC rotary table Palett size: 630 x 500 mm Palett system Amount of paletts: 5 Equipment Chip conveyor cooling system Internal cooling: 40 bar Air blow Roto Clear

Condition: excellent (used), Year of construction: 2015, operating hours: 3,104 h, functionality: fully functional, machine/vehicle number: 11415741834, operating hours of spindle: 1,347 h, Equipment: chip conveyor, documentation/manual, DMG MORI DMU 50 – 5-Axis Machining Center – Excellent Condition – Only 1,347 Spindle Hours For sale is a meticulously maintained DMG MORI DMU 50 5-axis machining center from 2015. The machine was relocated to our facility in June 2026 and subsequently fully commissioned, geometrically measured, and technically inspected by the DMG MORI factory service. During this process, all functions were checked, the machine was realigned, the measuring probe was calibrated, and the kinematics were checked and corrected. Afterwards, a successful test run was performed without any issues. The machine is immediately ready for production. With only 1,347 spindle hours and approximately 3,104 operating hours, the machine is in exceptionally good technical condition. Technical data: Fgsdpfsziz S Dex Ad Isd • Control system: Siemens SINUMERIK 840D solutionline / CELOS • Spindle speed: 14,000 min⁻¹ • Machine weight: approx. 4,450 kg • Voltage: 400 V / 50 Hz Equipment: • 5-axis machining • Siemens SINUMERIK 840D solutionline / CELOS • Internal cooling (IKZ) • High-pressure coolant system • Chip conveyor • 3D measuring probe • Tool measuring device TT160 • Electronic handwheel • USB interface activated • CELOS user interface Maintenance / Service: DMG MORI Service, July 2026 The following work was carried out by the manufacturer: • Machine realigned • Geometry fully checked • Geometry report created • Measuring probe newly calibrated • Kinematics checked and corrected • Tool measuring device TT160 refurbished • Complete function test performed • Operator training provided The machine was subsequently fully inspected and approved by DMG MORI.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, control type: CNC control, degree of automation: automatic, actuation type: electric, The Amada THV 430 is a highly productive CNC dual-head milling machine. It is designed to machine all four sides of square metal plates with maximum dimensions of 430x430x150 mm (optional 200 mm) and minimum dimensions of 20x20x10 mm in a single, fully automatic setup. This ensures perfect angles and excellent surface quality. Example: A workpiece of 150x150x150 mm can be processed in 4 minutes. Maximum workpiece weight is 230 kg. The machine is in excellent condition and operates flawlessly! Dimensions: 3320x2510x2070 mm (height) Fodpfx Asziz Hnod Isgd Weight: 3 tons

Condition: used, Year of construction: 2002, Deckel Maho DMU 50 T Milling machine Condition: Used Year of manufacture: 2002 Operating hours: 34,739 hours Program running time: 6,435 hours Technical data Tool holder: SK 40 Number of tool positions: 16 Travel ranges X/Y/Z: 500 mm / 400 mm / 400 mm Spindle speed range: 20 - 9000 rpm, stepless Table size: 700 mm x 500 mm, rotary table Motor power: 9 kW at 100% duty cycle / 13 kW at 40% duty cycle Fjdpfx Ajzhlq Iod Ijgd Connection: total 17 kVA Weight: approx. 3,000 kg Dimensions L x W x H: approx. 2100 m x 1520 (without peripherals) approx. 2140 mm

Condition: used, Year of construction: 2008, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,400 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, HDC3000 with 6 axes • Travel distances X=3000 mm, Y=1500 mm, Z=1400 mm • Heidenhain TNC 530 with handwheel Fgsdpfxszhlf So Ad Ied • NC rotary table for 5-sided machining, 1250 mm x 1600 mm • 2-axis NC universal drilling and milling head, full simultaneous and positioning operation • Spindle 10,000 rpm, HSK100, S1=220 Nm spindle torque • Tool changer system HSK100 / 60 positions – for tools up to 800 mm length • Chip conveyor • Optimized for 5-sided machining including deep-hole drilling • Coolant supply system • Internal/external air blow-off device • ICS 60 bar for deep hole drilling • Fully enclosed machine • Large interference circle 2800 mm • Includes washing gun • Short delivery time, subject to prior sale

Condition: reconditioned (used), Year of construction: 2010, • Traveling distances X=3100 mm, Y=1950 mm, Z=1390 mm • Heidenhain iTNC 530 with handwheel HR 410 Fgsdjzhlgcjpfx Ad Ijd • Machine table for multi side working 3000 mm x 1600 mm • 2-axis NC-universal milling head, for simultaneous and positioning working • Spindel 10.000 U/min HSK 100, 130 Nm Spindle torque • Tool change system HSK 100 / 40 places for 750 mm long tools • Chip conveyor (screw type) in X-axis, for transport into • Chip conveyor scraper belt type (traverse conveyor), Fabr. Knoll • Coolant container 900 l, Fabr. Knoll • Outside air at spindle • IKZ 60 bar for deep hole drilling function • Covering with safety glass pane, open at the top for loading by crane • 2 part sliding doors at the operator side • 2 part sliding doors at the front side, for easy loading • Radio-controlled measuring probe RMP 60 • incl. washing gun • incl. podiums at the front side and operator side • complete factory overhauled and painted new • short time delivery after arrangement • used machine • Y-axis ball screw in September 2021 incl. bearings renewed • X-axis new linear guiding system, July 2023 changed, renewed • Spindle overhauled at Mai 2023 (clamping system new, clamping cartridge new, rotation unit new, general tests) (at 23105 spindle hours)) • can be visited under power at 72793 Pfullingen • optional fixators • optional installation at customers plant • optional transport • 23122 spindle hours in total • 53991 machine hours in total • Year of construction 2010 Subject to prior sale

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Control system: Siemens 840D-SL Tool positions: 160 Tool holder: HSK 63 Spindle speed: 10,000 rpm / 242 Nm Pallet size: 630 x 500 mm Number of pallets: 2 X-axis: 800 mm Y-axis: 800 mm Z-axis: 1000 mm Table load capacity: max. 1000 kg Fsdpfx Aszhlbgod Isgd

Condition: good (used), Year of construction: 2022, Universal machining center Machine type: DMG DMF 360 / 11 linear Control: Heidenhain TNC 640 Celos Year: 2022 SPECIFICATIONS Travel X-Axis: 3.600 mm Y-Axis: 1.100 mm Z-Axis: 900 mm B-Axes C-Axis Amount of controlled axes: 5 Dynamikpaket für DMF 360 linear (Y1100) Rapid motion: (X/Y/Z): 80 / 60 / 60 m/min. Spindle speeds: 20 - 10.000 rpm Spindle power: 44 / 32 kW Torque: 288 / 187 Nm Tool: SK 50 Toolchanger Tool capacity: 120 NC rotary table Table size: 4.200 x 1.100 mm Max. Table Load: 1.200 kg Equipment Internal cooling: 40 bar Cooling tank: 980 l Chip conveyor Chip rinsing pistol Oil mist separator Air blow Caliper: Heidenhain TS 460 Fgedszizciepfx Ad Ijd Vorbereitung für den Einsatz 3D quickSet Automatic doors Electronical handwheel

Condition: good (used), Year of construction: 2014, Universal machining center Machine type: DMG Mori DMC 85 monoBlock RS3 Control: Siemens 840 D solutionline Year: 2014 SPECIFICATIONS 5-axis-simultaneous Travel X-Axis: 935 mm Y-Axis: 850 mm Z-Axis: 650 mm A-Axes: +/- 120° C-Axis: 360° Amount of controlled axes: 5 Fodpfszizbxsx Ad Iegd Spindle speeds: 14.000 rpm Tool: SK 40 Toolchanger Tool capacity: 60 NC-panning and rotary Table Palett size: 800 x 630 mm Max. revolution: 800 rpm Equipment Produktionspaket Internal cooling: 40 bar, 600 l bar Chip conveyor Chip rinsing pistol Oil mist separator Caliper 3D-Touch probe: Quickset Working mode: 4 Hydraulic clamping system Media outlet in the table Palett system: RS3 Amount of paletts: 3

Condition: good (used), Year of construction: 2002, Universal machining center Machine type: DMG DMU 200 P Control: Heidenhain TNC 430 M Year: 2002 SPECIFICATIONS Travel X-Axis: 1.800 mm Y-Axis: 2.000 mm Z-Axis: 1.100 mm B-Axes: 0,001° C-Axis: 0,001° Amount of controlled axes: 5 Spindle speeds: 20 - 10.000 rpm Spindle power: 44 / 32 kW Torque: 288 / 187 Nm Tool: SK 50 Toolchanger Tool capacity: 60 NC rotary table Table size: 1.700 x 1.400 mm Fodpszizanefx Ad Iogd Max. Table Load: 5.000 kg Equipment Chip conveyor Internal cooling: 40 bar Caliper Electronical handwheel Oil mist separator Tool measurement: Blum Laser Attachment spindle, 42,000 rpm, HSK 32 (optional)

Condition: good (used), Year of construction: 2002, Universal machining center Machine type: DMG DMC 340 U Control: Heidenhain iTNC 530 Year: 2002 SPECIFICATIONS Travel X-Axis: 2.800 mm Y-Axis: 3.400 mm Z-Axis: 1.600 mm B-Axes C-Axis Rapid motion: (X/Y/Z): 60 / 30 / 40 m/min. Fgsdpfxjziy Uwo Ad Isd Panning head Spindle speeds: 10.000 rpm Spindle power: 44/32 kW Torque: 288 Nm Tool: HSK 100 Tool capacity: 120 Tool diameter: 130 / 250 mm Tool lenght: 650 mm Tool weight: 30 kg NC rotary table: 2500 x 2000 Palett system Amount of paletts: 2 Palett size: 2.500 x 2.000 mm Rotary table plate: D. 2.800 Equipment Internal cooling: bar Cooling tank: l Chip conveyor Electronical handwheel Chip rinsing pistol

Condition: good (used), Year of construction: 1998, Tool setting device, tool presetting device, milling cutter setting device -Z-axis: 630 mm -unit of analysis Fgsdspam Avepfx Ad Ijd -360 degree protractor -Dimensions: 570/1720/H1875 mm -Weight: 387 kg

Year of construction: 2013, condition: good (used), Computer monitor, screen, TFT industrial monitor, flat screen, industrial monitor touchscreen -Manufacturer: Pro-face, industrial monitor flat screen touchscreen -Type: FP3710-T42-U -Article No.: PFXFP3710T2AU -Model: 3580406-01 -Dimensions: 475/120/390mm -Weight: 10.4 kg Fgodpouh H Efjfx Ad Ijd

Condition: good (used), Control unit, control panel, control panel, control unit, keyboard, screen, control -Siemens: Profinet connection box PN Plus -On the control panel: with additional panel holder/emergency stop button Fsdjfdb Uuepfx Ad Iegd -Price: per piece -Number: 4 pieces -Dimensions: 420/350/H1220 mm -Weight: 30 kg