Used Universal Table for sale (40,273)

Condition: good (used), Year of construction: 2008, load capacity: 7,500 kg, Max. tool width: 3300mm Max tool height: 1630mm Table size: 1400x380mm / side Cas27Wn8Iy Load capacity: 15000 kg Turning load capacity: 7000 kg Todpfx Afsup Aapj Tjf

Condition: used, Technical details: table load: 3 t machine weight approx.: 1,376 kg dimensions LxWxH: 1,4 x 1,7 x 0,18 m Todpfoxz E Exex Af Tjf positioning rotary table Load capacity tested up to 3 tons. Currently operates in 2 positions at 180 degrees. Can be modified up to a maximum of 270°. *

Condition: used, Universal milling machine table, angle table, setup angle, clamping table, presumed MAHO make T-slot table, add-on table for universal tool milling machine Table no.: 76-400-1 / 2210 05 00 Table size: 700 x 330 mm Overall height: 210 mm T-slot width: 12 mm T-slot pitch: 45 mm - Table plate with 7x T-slots, 12 mm each - Mounting surface 90°, 13 mm diameter holes, 14 mm elongated holes for fastening and 12 mm guide slot - Hole spacing, top mounting plate Ø 13 mm = 500 mm, 50 mm from the table surface (measured at center) - Hole spacing, middle mounting plate Ø 13 mm = 472 mm, 95 mm from the table surface (measured at center) - Elongated hole spacing, middle mounting plate = 475 mm, 140 mm from the table surface (measured at center) - Elongated hole spacing, bottom mounting plate = 475 mm, 185 mm from the table surface (measured at center) Dimensions (L x W x H): 820 x 330 x 210 mm Weight: 61 kg In good condition Tedpfxsxy Stye Af Tsf

Condition: good (used), functionality: fully functional, Universal table Tjdpfx Ajxw Nnvsf Tof for DECKEL ; FP - Milling machines . Dimensions : 80 x 240 cm .

Year of construction: 2000, condition: used, table clamping surface: 800 x 425 mm 6 T-slots 14-H7, slot width: 63 mm Tedpfx Afob N Acmj Tsf table swivels left/right: 45° Table inclinable from/to the machine: 15/45°. Table top rotation range 360°, resolution: 0,001°. max. workpiece weight: 300 kg Dead weight: 340 kg

Year of construction: 1988, condition: used, table diameter 400 mm table load 0,126 t table height 100 mm Tjdpoipyx Nefx Af Tef weight 126 kg Dividing rotary table with 400 mm diameter of a Heckert FSS 400.

Condition: used, Year of construction: 1985, Universal turn & tilt table from MAHO 800 Todpfjb I Irwsx Af Tef with mechanical y-adjustment via hand wheel

Condition: used, Technical details: weight of the machine ca.: 4,0 t machine dimensions LxWxH: 1,8 x 1,8 x 0,9 m Machine table with 5 indexing tables for multi-side machining Todpeu N D S Ujfx Af Tef Application: Multi-side machining of workpieces in circular transfer machines in one operation on 5 indexing tables with clamping devices. Design: Round, fixed body with 5 round tact tables, which are arranged in the shape of a pentagon, and a centrally mounted turntable. Description: Turntable center = type Pentagon, diagonal 830mm; swing diameter Ø 873mm, side length 513mm 5x rotary indexing table, as a regular pentagon on machine body, center circle Ø = 1280mm, table shape truncated square 380x380mm, clamping device via 4 pieces make Röhm truncated cone clamping devices and 1 central centering flange, 360 ° rotatable, workpiece Ø approx. 730mm Actuation / drive is hydraulic *

Condition: used, Universal swivel-tilt-rotary table DECKEL type FVW, suitable for FP 2 or FP 3 (Deckel no. 62473). Table size: 700 x 240 mm. Swivel range: +/- 30° in all directions. Weight: approx. 90 kg. Todpfxexcilro Af Tef

Condition: good (used), DECKEL universal table, Support surface 800 x 380 mm 8 T-slots See photos for condition Tsdpfx Afsxvxfho Tef

Condition: like new (used), Universal milling table is in very good condition. Todpfx Afohtyxwe Tjf

Condition: good (used), Type / Model: Rotating-Tilt-Swivel Table Tsdpovzlibjfx Af Tef Type Designation: 2038 Number: 500 - 0252 Table Top: 700 x 430 mm Clamping Surface: 700 x 430 mm Stop Surface: 580/500 x 250 mm Slot Width: 14 / 24 mm Slot Depth: 14 / 24 mm Number of Slots: 5 Features: Rotating, Tilting, and Swiveling Condition: Good Weight: 230 kg Dimensions: 700 x 600 x 600 mm

Year of construction: 2023, condition: as good as new (ex-display), - Demonstration machine in mint condition- - 180° swivel head for rounding and deburring - Ergonomic working - Uniform rounding Tsdpfx Afsflvc Hs Tsf - Processing of small parts possible - anti-slip mat

Condition: excellent (used), -COM 783- A stable universal precision T-slot table with horizontal mounting surface for smaller machine milling machines is offered here. Todpfxod Sf Ims Af Tef The machine table is made of solid machine casting Dimensions Table: (l x w ) 800 x 325mm Clamping area: 725 x 260mm Screw-on surface: 520 x 160mm (middle distance of the screw-on grooves approx. 50mm) Slots: 4 pieces longitudinally- running T- slots DIN 650 Nominal size 14 x 25

Condition: used, Univ. swivel-tilt-rotary table Add-on table for Univ. tool milling machine table size 630 x 250 mm Groove width 14 mm Rotatable and tiltable +/- 30 Swiveling +/-45 Tjdpfx Ajgp T D Nef Tof - 4x T-slot Weight approx. 120 kg

Condition: used, Universal swivel, tilting, and rotary table DECKEL Universal add-on table for tool milling machines suitable for FP 2L, FP 3L, or FP 4L No. 2314 Year of manufacture: approx. 1975 Clamping surface: 1000 x 520 mm - 6 clamping slots, 16 mm, spacing 90 mm Todpfed E A I Nsx Af Tjf - Clamping plate can be rotated horizontally to the right and left up to 45 degrees, with scale - Can be tilted to/from the machine +/- 15 degrees - Swivel range +/- 15 degrees - Swivel table, tilting table, angle table Permissible load max. 1000 kg Weight: 400 kg Good condition

Condition: excellent (used), Year of construction: 1998, total length: 7,150 mm, total width: 2,550 mm, total height: 2,670 mm, UBH Universal Bulk Handling 31,345L, 20FT tank container / swap body, bottom discharge, steam heating, insulated, 5-year inspection / CSC valid until: 04-2028 = Further Information = General Information Year of manufacture: Dec. 1998 Model year: 1998 Weights Tjdpfx Afexvyc Ie Tsf Tare weight: 4,250 kg Payload: 31,750 kg Gross weight: 36,000 kg Functional Loading compartment dimensions: 715 x 255 x 267 cm Loading compartment volume: 31,122 l Build brand: UBH Universal Bulk Handling Number of chambers: 1 Condition Technical condition: very good Optical condition: very good Further Information Contact Arne Honingh or Piet Swank for more information.

Condition: excellent (used), Year of construction: 1997, total length: 7,150 mm, total width: 2,550 mm, total height: 2,670 mm, UBH Universal Bulk Handling 31,169L, 20FT tank container / swap body, bottom discharge, steam heating, insulated, 5-year inspection/CSC valid until: 05-2027 = Further Information = General Information Year of manufacture: Oct. 1997 Tjdpfx Ajxurqnjf Tjf Weights Tare weight: 4,375 kg Payload: 31,625 kg Gross vehicle weight: 36,000 kg Functional Cargo compartment dimensions: 715 x 255 x 267 cm Cargo volume: 31,122 l Body manufacturer: UBH Universal Bulk Handling Number of compartments: 1 Condition Technical condition: very good Visual condition: very good Further Information Please contact Arne Honingh or Piet Swank for more information.

Condition: excellent (used), stable angle table, used Tjdew Rnziopfx Af Tsf Clamping surface 800 x 360 mm 5 T-slots Distance = 65 mm

Condition: like new (used), Year of construction: 2021, operating hours: 50 h, functionality: fully functional, load capacity: 5 kg, arm reach: 850 mm, UR5e – As good as new! For sale: a UR5e cobot in excellent condition, barely used (approx. 50 hours). This robotic arm is fully up-to-date and runs on the latest UR software, making it immediately deployable for production, R&D, or testing setups. Year/Condition: virtually new, minimal wear Usage time: approx. 50 hours Todjx Aux Djpfx Af Tsf Software: latest firmware version installed Status: fully functional, ready for immediate use Perfect for companies seeking a high-quality, reliable Universal Robots cobot without the price of a new unit.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 1,224 h, Main Drive Number of axis 6 Tsdpfx Aoxzlt Nef Tjf Max payload 5 kg This 6-axis Universal Robots UR5 CB3.1 was manufactured in 2018. A versatile robot arm with a working radius of 850 mm and a payload capacity of 5 kg. Ideal for tasks requiring precision and efficiency. If you are looking to get high-quality robotic capabilities, consider the Universal Robots UR5 CB3.1 machine we have for sale. Contact us for more information. Application Types Robotics

Condition: used, Year of construction: 2018, Industrial robot Manufacturer: Universal Robots Model: UR10 Year of manufacture: 2018 Todpsxpt Nuefx Af Tjf Including control unit and handheld operator panel (new) 251125

Condition: repair required (used), Year of construction: 2017, overall weight: 30 kg, load capacity: 3 kg, arm reach: 500 mm, type of input current: AC, Parameter Specification Manufacturer Universal Robots Model UR3 (CB3 Controller) Type 6-Axis Collaborative Robot Arm Payload (max) 3 kg (6.6 lb) Reach (Arm Length) 500 mm (19.7 in) Repeatability ± 0.1 mm (± 0.0039 in) Degrees of Freedom 6 rotational joints Joint Range ± 360° for all joints (infinite rotation on wrist 3) Joint Speed (max) 180 °/s (base–elbow), 360 °/s (wrist joints) TCP Speed (max) 1 m/s Robot Weight ≈ 11.0 – 11.2 kg (≈ 24.5 lb) Footprint Ø 128 mm (5.0 in) Mounting Options Floor / wall / ceiling / bench Cable Length 6 m (standard) Controller Dimensions (W×H×D) 475 × 423 × 268 mm (18.7 × 16.7 × 10.6 in) Controller Weight ≈ 12 kg (26 lb) Power Supply 100–240 V AC (single phase) 50/60 Hz Average Power Consumption 150 – 300 W (typical, depending on load) Communication Interfaces Ethernet / Profinet / EtherNet-IP / Modbus TCP I/O Ports 8 digital in, 8 digital out, 2 analog in, 2 analog out Tool I/O M8 connector, 12–24 V supply Noise Level < 60 dB(A) Operating Temperature 0 – 50 °C (32 – 122 °F) Protection Rating IP 54 (arm), IP 20 (controller) Compliance ISO 10218-1 / ISO 13849 / CE Installation Time < 1 hour typical Software UR Polyscope v3.x (CB3 compatible) Condition Working unit – arm powers up, movement test not yet confirmed Year of Manufacture 2016 – 2017 (CB3 generation) Serial Number Available upon request Included Items UR3 robotic arm (CB3 generation) CB3 controller Teach pendant with cable Power and communication cables Notes Unit powers on normally; joint movement not fully verified (sold as is). Cosmetic condition: minor scratches consistent with normal industrial use. Tsdpfx Afjxvp Tco Tef Can be crated or palletized for international shipment. Ideal for resale, spare parts, or refurbishment.

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, overall weight: 33 kg, load capacity: 10 kg, arm reach: 1,350 mm, At Automex, we don’t just supply robots – we use them daily in our own production. This hands-on experience enables us to confidently recommend only solutions that truly work. Universal Robots UR10 – Collaborative Robot (Cobot) ----- €28500 net ----- Condition: Brand new Year of manufacture: 2025 Warranty: Full start-up warranty – all functions tested and certified Origin: Original production by Universal Robots, Denmark Delivery: Price includes shipping to any location within Europe The UR10 is one of the most popular and versatile collaborative robots on the market. With its high payload capacity and long reach, it is ideally suited for a wide range of industrial applications – from machine tending and packaging to assembly and pick-and-place. Its intuitive programming environment makes it an excellent choice both for mass production and flexible, small-batch operations. Technical specifications (UR10): Payload: 10 kg Reach: 1,300 mm Degrees of freedom: 6 rotary joints Repeatability: ±0.05 mm Robot weight: 33.5 kg Power consumption: approx. 350 W Mounting options: floor, ceiling, or wall Programming: intuitive URCaps environment + integration with external systems (ROS, Modbus, Ethernet/IP, PROFINET) Safety functions: compliant with ISO 10218-1 and ISO/TS 15066 The Universal Robots UR10 has been designed for safe human-robot collaboration. Its flexibility, precision, and ease of deployment make it the perfect solution for companies looking to automate quickly and effectively, without compromising safety or versatility. Tedpfexf Ibqox Af Tef We offer a full range of Universal Robots cobots as well as used units from brands such as AUBO, YASKAWA, and ABB. Please feel free to inquire! The cobots shown are used in Automex production and may be a different model than the one proposed in the advertisement.

Condition: good (used), Here we offer you a used shelf connector for sale. Included in delivery: 01x shelf connectors usedMaterial colour: sendzimir galvanizedShelf spacing: approx. 150 mmProfile: approx. 35 x 25 mmWeight/piece: approx. 0.214 kg /piece 02x hexagon bolts, M10 x 3502x hexagon nut, M1002x washers, M10 Tjdpjd Tyhvjfx Af Tsf