Machining center

MAKA HC-55-TBZ

Condition: good (used), Year of construction: 1997, 1. Barberan Profile Wrapping Machine - Reserved MODEL RP-30 Profile width: 10-280 mm Profile height: 2-80 mm Minimum profile length: 500 mm Maximum roll material width: 280 mm Veneer strip width: 25-280 mm Glue temperature: 220°C Transport roller diameter: 200 mm Transport roller width: 2 x 15 mm Maximum roller spacing: 250 mm Feed speed: 10-60 m/min Working height: 900 mm Photos no. 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 2. Friz Profile Wrapping Machine - Reserved Model Friz MR 30 Prodjn Nv N Uepfx Adnjd Table length approx. 3200 mm Friz MR 30 profile wrapping machine for films up to 300 mm wide Hardo adhesive applicator Pressure rollers Labelling table Everything as shown in the pictures, additional photos on request Dimensions approx. 15000 x 3000 x 3000 mm Weight approx. 5000 kg Photos no. 11, 12, 13, 14, 15, 16, 17

Year of construction: 2004, condition: ready for operation (used), Max. working width: 1000mm, feed rate: 5-20m/min, height: 2200mm, length: 4000mm, weight: 3.3t, with documentation, was maintained regularly. Podpfxoi E Trpe Adnerd

Condition: good (used), Feed through production line for wooden doors very hight efficiency one complete door in 30 seconds (lock hole, handle hole, anuba hinges) Machine composed from two parts - so in the same time 2 doors are processed each from both sides Each part of the machine can work independent on the left side and right side Part 1 - left side milling for strike plate and milling handle hole and key hole - right side in the same time makes boring for anuba hinges Pjdpfx Adouq Scpjnerd Part 2 - left side milling for lock hole - right side in the same time makes inserting anuba hinges

Condition: excellent (used), Year of construction: 1995, upon request Prjdpefxgmgjfx Adnjd

Condition: like new (used), Log circular saw, for diameter until 1100mm Prodpei Ek Hpsfx Adnsd

Condition: excellent (used), Panel saw Martin T72a Sliding table length: 3200 mm Cutting width to the right: 1250 mm Maximum cutting height: 170 mm Scoring unit Hydraulically adjustable cutting height Hydraulically adjustable cutting angle Pjdpfsxapvxex Adnord Right rip fence hydraulically adjustable Saw blade size min/max: 200–500 mm Scoring saw blade: 120 mm Saw blade speed, variable via belts: 2800-4000-5500 rpm Main motor: 5.5 kW Scoring unit motor: 0.75 kW CE certificate Technical documentation

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, MAKA BC 150t compakt, second-hand machine 5-axis CNC machining center for machining aluminium and plastic. Stand portal in 4-column design (bridge center), 2 x unit carrier Technical data: Working ranges in 5-axis operation, with tool Ø 160 / length 160 mm: 2 x each: Y-axis: 1,500 mm X-axis: 2,500 mm Z-axis: 650 mm / with 180 mm fixture height Couplable tables, for processing large components. Extended extension stroke, for loading and unloading. Rapid traverse speed: X-/Y-/Z-axis 60 m/min. Acceleration: 3 m/sec² Prodpetq Hkrjfx Adnsd Rotation axis 540° / swivel axis 196° (+/- 98°) Table design: - 2 x aluminum flat table, size 2,500 x 1,500 mm - M10 threaded bushes and centering bolts in the table top. - 3 x vacuum clamping circuit per table. - 3 x pneumatic clamping circuit per table. Milling unit: - 2 x universal unit for 5-axis milling with 50° inclined head, HSF F63 tool holder, max. power 12.5 kW (S1), speed infinitely variable up to 24,000 rpm, water-cooled milling spindle. - 1 NC height-adjustable chip catcher system per milling unit, with lamella curtain. Tool changer: - 2 x rotary table tool magazine with 20 places. Control system: - 1 x Siemens SINUMERIK 840D SL machine control unit - 1 x Siemens OP 19 PCU control panel with 19" display, full keypad, membrane switch. - 1 x additional Siemens HT 8 portable manual control panel with 7.5" touchscreen, version with handwheel. Occupational safety: - 1 x soundproof cabin. - 2 automatic loading gates, with vision panels. - The loading and unloading area is protected by light barriers and bumpers on the tables. Measuring probe: - 2 x 3D radio measuring probes, with HSK F63 tool holder, for changing from the tool magazine. Minimum quantity lubrication: - 2 pieces minimum quantity lubrication - 2 flushing nozzles per milling unit, each individually controllable via M function. Table blow-off system: - 2 x Airknife table blow-off system, for blowing off the tables during the exit from the machining area. Limited in coupled operation. The machine is assembled and can be inspected in 89568 Hermaringen.

Condition: good (used), Year of construction: 2000, MAKA KPF 334R Year of manufacture: 2000 Compact design with control cabinet integrated in the base frame. CNC control BWO 900C, memory 1 MB, in integrated PC. Technical data: Working areas / cube dimension: with tool length 130 mm and -Ø 60 mm X-axis: 1.000 mm Y-axis: 1.000 mm Z-axis: 300 mm, with 120 mm fixture height A-axis: 540 B axis: 200° (+/- 100°) Rapid traverse speed: X/Y axis: 45 m/min. Prodoir Aq Topfx Adnsd Z axis: 15 m/min. A/B axis: 10,000 °/min. 1 piece high-speed milling spindle HSD 6,8 kW, speed infinitely variable from 2,000 - 24,000 1/min, nominal power from 12.000 1/min. With ceramic bearings, air-cooled. Tool holder SK 30 with tool changing device. 1 piece travelling drum tool magazine for 10 tools up to Ø 60 mm and - depending on the tool diameter - 130 mm length from face contact. Aluminum table top 1.000 x 1.000 mm with grid holes 1 piece vacuum pump 54 m²/h, 1 x vacuum clamping circuit Automatic central lubrication, control cabinet with air conditioning unit. Working safety: Sliding door for front loading, protective cabin for the rear of the machine, with side access door, the cabin is open at the top. Connection values: Voltage: 400 V (max. +/- 5%) Frequency: 50 Hz. It is not possible to use a residual current device in the machine supply line. Operating temperature: 10 - 35° C Pneumatic: 6 bar, approx. 18 m³/h Tool holders and machining tools are not included in the delivery. Second-hand machine, without any guarantee and warranty.

Condition: used, No. 3205 Copy router Reichenbacher RMF Used For copying, enlarging or reducing a model (wooden figure) Creates a wooden blank (wooden figure) in the desired size Clamping length max. 1000 mm The machine requires a base area of approx. 2500 x 2500 mm LW Sale on behalf of customer, from location near 95485 Warmensteinach, without dismantling, without transport and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Prsdev Hdg Njpfx Adnsd Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: good (used), Year of construction: 1999, functionality: fully functional, input voltage: 400 V, Used machine MAKA FPM 470R 5-axis CNC machining center for machining wood, plastic and aluminum. Machine in mobile portal design, with rack and pinion drive. The machine was last used in wooden staircase construction. Year of manufacture: 1999 // RETROFIT in 2019 Technical data: CNC control BWO Vector 921 for 5-axis machining. 256 MB NC memory, USB connection, mobile control panel. Working areas in 5-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,600 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (OK vacuum suction cup) Working areas in 3-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 6,000 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (vacuum suction cup) A-axis 540° (rotation axis), B-axis 196° (swivel axis +/- 98°) Rapid traverse speed: X-/Y-axis 45 m/min., Z-axis 15 m/min., A-/B-axis 10,000 °/min. Pedovmpx Repfx Adnjrd Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, power max. 12.5 kW, speed continuously adjustable up to 17,000 rpm, milling spindle water-cooled. - 1 NC height-adjustable chip collection system with slat curtain. Tool magazine: - ISO 40 tool interface for automatic tool change system. - 2 chain tool magazines with 32 spaces each for tools up to D = 90 mm, with sorted storage up to max. 160 mm. (Three spaces are required for this). Machine table: - 10 support tubes on linear guides with pneumatic release device for quick positioning. - 2 control circuits for "lifting/lowering" stops - 2 control circuits for "clamping/loosening" pneumatics - 2 vacuum control circuits with button for clamping and automatic reset through CNC programming. - 2 step separators, stroke approx. 320 mm. - Various clamping devices for posts and curved parts. - 1 chip conveyor belt integrated in the base frame, for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Tools: Tools are not included in delivery! Vacuum supply: - 1 vacuum pump, including tank with 250 liter capacity for quick vacuum build-up. - approx. 20 vacuum supports with various suction cups. - 4 lifting/lowering stops for positioning components. Other: - Automatic central lubrication. - Control cabinet with air conditioning unit. - Projection laser Work safety: - Traveling protective cabin with safety bumpers. Overhaul / repairs in 2018 / 2019: - Conversion of the rotary and swivel axis to a new generation of drives (digital). - New Y- / X- / Z-axis energy chains. - Complete new cabling, all power and measuring system cables renewed. - All guide carriages new - New Z-axis ball screw and guide rails. - New X-axis guide rail. - Control system converted to BWO Vector 921, with V-CNC card 256 MB NC memory. - New vacuum valves and vacuum hoses. - 2 x tool magazine + tool gripper overhauled. - Swivel suction overhauled. Software: - It is possible to take over a current version of the Compass staircase construction software. Compass is the leading provider when it comes to the planning and production of wooden staircases.