Used laser cutting machines for sale (384)

Condition: used, Trumpf TRUMPF TruDisk 6602 (4C) High-Power Disk Laser with up to 6.6 kW Type: TruDisk 6602 (4C) The TRUMPF TruDisk 6602 (4C) is a high-performance disk laser offering approximately 6.6 kW of continuous power output – perfectly suited for welding, cutting, and surface treatment processes for metals such as steel, aluminum, copper, etc. System type: TruDisk 6602 (4C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: November 2012 Drawing number: 20-10-02-A5 No further in-house inspection has been performed. Operating hours could not be read out. The laser was operating flawlessly until decommissioning. Key Technical Features: • Power: Continuously adjustable from 80 W up to 6,600 W, max. 6.6 kW for machine tool applications • Beam quality: < 2 mm·mrad for excellent focus handling • Wavelength: 1030 nm (infrared), adaptable to green wavelength for specific models • Output options: Up to 4 laser outputs (4C) for simultaneous supply of multiple process cells • Cooling system: Integrated heat exchanger (up to 28°C inlet temperature), optional compressor cooling (up to 38°C) • Modular and service-friendly: Compact footprint (< 1 m²), modular components for fast maintenance and service Benefits & Applications • Maximum process stability: Real-time power regulation ensures reproducible results • Reflection resistance: Patented resonator design enables welding of reflective metals such as copper and aluminum • Industry 4.0 ready: Sensor-integrated monitoring system, OPC-UA interface for condition monitoring & predictive maintenance • Energy efficiency: Up to 50% reduction in power consumption thanks to intelligent pulse control and energy-saving modes • Versatility: Application range includes welding (including BrightLine for nearly spatter-free seams), cutting, hardening, casting processing, additive manufacturing, laser wire deposition welding, and more Suitable Use Cases: Ideally suited for industrial high-power laser applications: Application | Features ---|--- Automotive structural part manufacturing | Deep penetration welding with high reproducibility Copper welding | Particularly suitable with green wavelength (> 95% spatter reduction) Remote hybrid welding | Fast processing of large surfaces with robust beam Additive manufacturing & hardening | Enabled by excellent beam quality and compact design Main Technical Data Property | Specification ---|--- Laser power | Up to 6,600 W (6.6 kW), continuous Beam quality | < 2 mm·mrad Wavelength | 1030 nm (infrared) Number of outputs (4C) | Up to 4 simultaneously usable fiber outputs Fiber connector diameter | 100–600 µm (depending on configuration) Hjdpfozii D Iex Aaienr Beam delivery | Fiber-based, passive (no deflection mirrors required) Cooling | Water/air-cooled, internal or external chiller Dimensions | Approx. 1000 × 800 × 2100 mm (W×D×H, variant-dependent) Weight | ~800–1200 kg (excluding cooling) Power supply | 380 V - 10% ... 460 V +10%, 3-phase AC + PE, 38 kW / 41 kVA, 59 A / 400 V, 50–60 Hz Control | TruControl 1000/3000, OPC-UA interface Safety standards | Laser safety class 4 according to EN 60825-1 Weight: approx. 1200 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data. Information may be subject to alteration!) We are happy to answer any further questions you may have by phone.

Condition: good (used), Year of construction: 2024, Manufacturer: ERMAKSAN Fibermark | Model: Fibermark SM 6000 3X1.5 Gen-5 | Serial Number: 33122-ERH | Year of Manufacture: 2024 | Working area: 3000 x 1500 mm; Resonator: 6000 Watt IPG-YLS fiber laser technology | Max. peak power: 6000 W | Laser wavelength: 1075+/-5 μm | Axes: X-U-Y-Z | Max. axis speed: 100 m/min | Acceleration: 2.5 G | Voltage: 380 V | Power: 28 kW | Protection class: IP 65 | Dimensions (approx.): 5295 mm x 2325 mm x 10360 mm (W x H x L) | Approx. weight: 14590 kg | Colour: Black-White-Orange | Structure: Steel | Working area: 3x1.5 meter laser processing field | The specified dimensions are approximate values. All other details are without guarantee. Hodpjy N Dkfofx Aaisnr

Condition: good (used), functionality: fully functional, Year of construction: 2006, The machine is being sold due to a plant modernization. Only 3,000 operating hours for laser cutting. Immediately available. Inspection and demonstration under power are possible by appointment. Technical data: Manufacturer: TRUMPF Hnedpfxozlr Rps Aaijr Model: TruLaser Tube 5000 (T01) Year of manufacture: 2006 Control system: Siemens Sinumerik 840D Laser type: CO₂ laser TruFlow Working area, tube length: 6,500 mm Max. round tube diameter: 150 mm Max. rectangular profile / circumscribed circle: 150 mm Max. material weight: 20 kg/m Max. workpiece weight: 130 kg Automatic tube support Self-centering clamping system

Condition: used, Year of construction: 2015, CNC laser cutting system, fiber laser 3kW Manufacturer: Microstep Hodpfx Aaezhtp Ejisnr Type: FIBERLAS MSF 4001.20BL Year of manufacture: 2015 With drilling unit + tool changer Complete system consisting of: - Cutting system, - IPG fiber laser source, - HIGHYAG cutting head and - KEMPER extraction system. Laser IPG Ytterbium Laser System YLS-3000-CUT-Y14 Rated power: 3,000 W (3kW) Operating mode: CW / modulated Power consumption: approx. 9 kW max. (8.3 kW typical) at 3,000 W IPG air-water chiller for cooling Operating hours: approx. 26,819 h Dimensions: W/D/H: 1,004 x 804 x 556 mm Cutting head II-VI HIGHYAG BIMO-FSC Permissible laser power: up to 4 kW Focal length f: 150 mm (focusing module 1.5) Focus diameter: approx. 300 µm with a 200 µm fiber optic Weight: approx. 6.2 kg Extraction system KEMPER SYSTEM 8000 Extraction capacity: 5,000 m³/h Filter area: 50 m² Filter: KEMPER KemTex ePTFE membrane filter Testing: IFA-tested, welding fume class W3 (high-alloyed steels) Availability from 10/2026 Reference No.: C2177 22726

Condition: new, FSCUT Ethercat CNC Control System DELTA Ethercat Servo Driver & Motor System Hiwin Guide Liner Hodpenr Hcwsfx Aaienr SMG / KH Rack Raytools / BLT Series Cutting Head Laser source 6kW HanLi Chiller Gross weight around 9.5ton Optional: bevel cutting for sheet

Condition: new, functionality: fully functional, Year of construction: 2026, laser type: fiber laser, laser source manufacturer: Maxphotonics, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, Why still bother with the cut quality of fine plasma systems? Why still waste valuable space in your workshop with a rotary table? Why still spend thousands of euros each year on expensive plasma wear parts? In addition to the obvious advantages of modern fiber laser technology regarding precision and virtually burr-free laser cut quality, laser cutting is surprisingly cost-effective. At the same time, laser cutting is much easier to operate than plasma cutting systems. And the best part is that we, Schmidt & partners Cutting, support your system from our two service centers throughout its entire service life. We are a reliable partner in the cutting world, providing perfect consulting, installation, training, maintenance, and repair services. We support you with our know-how and experience, including cutting parameters for special materials. We also gladly assist you with the implementation of this technology in your company, particularly with regard to the specific occupational safety aspects of laser technology. kaitec FIBER Pro HGLQ 3015 Cutting area 1,500 x 3,000 mm Max. sheet thickness 35 mm (depending on the laser source power) Laser systems 2kW / 3kW / 4kW / 6kW / 12kW Maxphotonics series (in cooperation with AK Industry GmbH, the certified service partner in Germany) Hnodpjzkuu Iofx Aaijr CE certified, risk assessment completed Do you not yet have a suitable filter system? We will gladly select the appropriate filter system to meet your needs. We look forward to hearing from you!

Condition: excellent (used), IPG Type: YLS - 5000 Description: IPG Ytterbium laser system YLS-5000-S1T 5 kW laser power Compact footprint Highly efficient ECO modules Compatible with all types of processing heads Independent power control via field bus interface Extended IPG power supply with integrated safety features Laser emission ON watchdog Data: YLS-5000-S1T 400-460V AC 3P/PE 50/60Hz 59A 63A/80kA Year of manufacture: 2011, Serial number: 11101050 Condition: used Scope of delivery: (See image) Hsdezg Evuepfx Aaijnr (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by phone.

Condition: new, Year of construction: 2025, All-round fiber laser metal tube cutting machine Multiple function options help the laser tube cutting machine be used in numerous tube cutting processes. The slender nozzle allows the laser tuber cutter to avoid interference and cut various types of tubes, including special-shaped tubes like H-Beam, P-Beam, I-beam, etc. Hnodpohwrk Tefx Aaier Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. BodorGenius, combined with the lightning-quick piercing process, completes the whole piercing during it moves down on Z-axis. Thanks to the technology, no reworking is necessary for medium and thick sheet piercing. Angle steel and channel steel cutting are standard with no need for additional installation. Optimized edge searching method and algorithm guarantee higher cutting precision and better steadiness of the laser cutter. Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W Maximum machinable tube length: 6500mm/9200mm Chuck drive types: NC electric chuck Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2025, All-round fiber laser metal tube cutting machine Multiple function options help the laser tube cutting machine be used in numerous tube cutting processes. Hnsdpfxjhwrhfj Aaijr The slender nozzle allows the laser tuber cutter to avoid interference and cut various types of tubes, including special-shaped tubes like H-Beam, P-Beam, I-beam, etc. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. BodorGenius, combined with the lightning-quick piercing process, completes the whole piercing during it moves down on Z-axis. Thanks to the technology, no reworking is necessary for medium and thick sheet piercing. Angle steel and channel steel cutting are standard with no need fior additional installation. Optimized edge searching method and algorithm guarantee higher cutting precision and better steadiness of the laser cutter. Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W Maximum machinable tube length: 6500mm/9200mm Chuck drive types: NC electric chuck Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2025, Model: K110 K230 K360 Working Area: from 8649×1398×1811mm to 10000×3500×2100mm Laser Output Power: 3000w/2000w/1500w/1000w X/Y-axis positioning accuracy: 0.05mm X/Y-axis repositioning accuracy: 0.03mm X/Y-axis Max. linkage speed: 60m/min 1. Integrated full protection cover Integrated full protection cover design, installing in place, greatly reducing installation time. 2. Bodor Genius T needle nose auto-focusing laser head Bodor Genius T needle nose auto-focusing laser head, applicable for all kinds of tubes such as angle steel, channel steel, I-beam, etc. 3. Rectangular Tube Welded Bed Simple structure and flexible layout. 4. Bodor Thinker 3.0 System The dedicated control system of tube cutting machine integrated with the most advanced technology, can cut angle steel and channel steel directly without nesting and returning home. 5. Applicable to smaller clamping diameter The rear jaws can clamp the pipe to go through the front chuck, which greatly shortens the physical distance between the cutting head and the rear chuck jaws. Tail length is reduced to 70mm and the material utilization rate is increased to 99%. Hnodpeg D Ntqjfx Aaior 6. Ergonomics Loading and operating on both sides; and humanized interaction interface, convenient and smooth operation, and favorable user experience. 7. Integrated design Integrated design of electric control cabinet and main body, saving the space occupied, standardizing the line installation.

Condition: new, Year of construction: 2025, Working Area: 6100mm*1524mm/4000mm*1524mm/3048mm*1524mm Laser Output Power: 3000W/2000W/1500W/1000W Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Max. linkage speed: 91m/min Max. acceleration: 1G 1. Stretched Aluminum Beam Aviation-level material with enhanced rigidity, greatly reduces beam deformation during high-speed operation, and improves high-speed directional sensitivity and processing efficiency. 2. Tenon-and-mortise Type Plate Welding Structure Bed Use Chinese traditional Tenon-and-mortise structure to provide stronger bearing capacity. Solder joint fixing and structural bearing ensure long-standing operation stability. Welded structure improves shock absorption effect, lowering deviation caused by shock, and offering more accurate cutting. 3. Double Automatic Centering Electric Chucks Double electric chucks with automatic centering function are easy to operate and require little maintenance. Brand new motor gives accurate control. Modular chuck components are independently developed and can be quickly replaced. 4. Automatic focusing function of laser head By setting perforation focal length and cutting focal length respectively, the cutting is more accurate. Suitable for multiple focal lengths, and focal position will be automatically adjusted based on thickness of different sheets. 5. Low Gas Pressure Alarm Function Hjdeg Eglpspfx Aaijnr Real-time gas pressure detection and abnormal information report ensure cutting quality and precision, and remind operators to replace gas in time.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 17,958 h, machine/vehicle number: 0752101130704, degree of automation: automatic, pipe diameter (max.): 152 mm, power: 21 kW (28.55 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 10,000 kg, PRICE REDUCED to £200,000 sterling!!!! We offer this used BLM LT FIBER EVO TUBE LASER laser cutting machine, year of construction 2021 with a 3kW fiber laser source. It has high-speed precise cutting and an integrated loading and unloading system. Suitable for steel, stainless steel and aluminium. It can cut complex shapes and profiles. Available for inspection and ready for immediate sale. Must be seen. Serial number: 0752101130704 Manufacture date: 10/2021 Supply voltage: 380 V Phases: 3 Supply frequency: 50 Hz Total installed power: 21 kVA Interrupting capacity: 25 kA Control voltage 1: 24 V Control voltage 1 type: DC Control voltage 2: 220 V Hedjyui Ekjpfx Aaienr Control voltage 2 frequency: 50 Hz Weight: 10000 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2003, table length 5040 mm table width 1550 mm 12 mm plate weight max. 330 kg travel -x axis 2520 mm travel -z axis 300 mm travel -y axis 1550 mm cutting speed 20 m/min feed speed X/Y/Z 80/80/60 m/min Hodpfevxwytex Aaisnr positioning accuracy +-0,01 mm/500 mm mm repeatability +/- 0,005 mm table height 820 mm size of opening 550x1550 mm compressed air 6/20 bar total power requirement 10 kW weight of the machine ca. ca. 6,5 t dimensions of the machine ca. 2,5x5,7x2,3 m Turbo blower replaced at 36,000 hours Compressed air dryer Alphapac 0015 SP Basement flue gas extraction type Vario T 1.5A Air conditioning unit RIEDEL PC 315.21-NE-LAS Laser radiation within class 1 The machine was regularly serviced

Condition: new, Year of construction: 2025, Entry-level fiber laser metal sheet&tube cutting machine One machine with two uses. AT series cuts both metal sheets and metal tubes. The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Fast air cutting efficiency increases by 37% when cutting carbon steel. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Angle steel and channel steel cutting are standard with no need fior additional installation. Condition: New Laser Type: Fiber Laser Laser Power: 1000W, 1500W, 2000W, 3000W Cutting Area: 3048*1524mm Cutting Speed: 0-100m/min Positioning accuracy: ±0.03mm Repositioning accuracy: ±0.02mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Hjdpfx Aohv U Ucjaionr Cooling Mode: WATER COOLING

Condition: used, Year of construction: 2012, control type: CNC control, laser type: fiber laser, laser source manufacturer: IPG, laser power: 3,000 W, sheet thickness steel (max.): 14 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness copper (max.): 5 mm, workpiece weight (max.): 750 kg, year of last overhaul: 2024, Equipment: cooling unit, documentation/manual, safety light barrier, For sale: Salvagnini 3kW Fiber Laser. Year of manufacture: 2012. The L3 is the first 2D laser cutting system designed and developed entirely to leverage all the advantages of fiber laser sources and linear drives, with features that make it the ideal solution for our customers’ requirements, such as: - Ease of operation - High productivity - Lower operating costs - Reduced energy consumption Key features of the L3 laser cutting system include: - Simple architecture with a purpose-built gantry structure, combining rigidity, precise positioning, high dynamics, and easy accessibility to the work area; - Highly efficient IPG fiber laser source; - Efficient control console for extremely easy and versatile production management, even directly from the machine PC; - High modularity of loading, unloading, sorting, and storage devices, offering a broad range of solutions for specific needs: from basic automation to fully automatic, unattended operation. Automatic pallet changer system for the laser table. Each table is equipped with steel, replaceable grids. Maximum sheet size: 3048 mm x 1524 mm Z-axis travel: 100 mm Maximum sheet weight: 750 kg Working table height: 980 mm Material Cutting capacity Mild steel (S185JR, S235JR, RAEX 250 C LASER): 14 mm Stainless steel (AISI 304, X5CrNi18-10 1.4301): 10 mm Aluminum (Al 99.5 EN AW 1050A): 8 mm Copper (Cu-ETP CW004A H040 EN1652): 5 mm Brass (Cu Zn CW508L H055 EN1652): 5 mm L3-30 L3 Laser System GF Steel grids Hjdpfjvulggex Aaijnr CRS Scrap containers SiX Controller FLR20 3000W Fiber resonator with chiller unit ASF Fume extraction ACUT Compressed air cutting option ADB Automatic sheet loading system Office Software Office software included

Condition: used, Year of construction: 2010, operating hours: 16,000 h, functionality: fully functional, machine/vehicle number: E1053A0012, overall weight: 850 kg, total height: 1,940 mm, total length: 1,700 mm, total width: 950 mm, Specification: Hnedpfxswq Rmps Aaior Protection class: IP54 Power: 16kW/17 kVA 24A at 400V Frequency: 50-60 Hz Supply voltage: 380V (-10%) to 460V (+10%) The Trumpf Laser TruDisk 2602 is a robust and powerful laser system, perfectly suited for demanding industrial applications. It features high precision and efficiency, enabling fast and high-quality cutting operations on various materials. Thanks to its compact design, the system can be easily integrated into existing production processes.

Condition: used, Year of construction: 2010, operating hours: 16,000 h, functionality: fully functional, machine/vehicle number: E1053A0011, overall weight: 850 kg, total height: 1,940 mm, total length: 1,700 mm, total width: 950 mm, Specification: Hsdpfxowq Rhms Aaionr Protection rating: IP54 Power: 16kW/17 kVA 24A at 400V Frequency: 50-60 Hz Supply voltage: 380V (-10%) to 460V (+10%) The Trumpf Laser TruDisk 2602 is a powerful and robust laser system, ideally suited for demanding industrial applications. With its high precision and efficiency, it enables fast and high-quality cutting processes with various materials. The compact design ensures easy integration into existing production lines, while the innovative technology guarantees stable and long-lasting performance.

Condition: new, Year of construction: 2025, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING Hodpfohv U T Hox Aaijnr

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 3,000 h, degree of automation: automatic, laser source manufacturer: TRUMPF, laser hours: 1,860 h, laser power: 3,000 W, TruLaser Tube 5000 fiber Laserpower: 3000W Year of manufacture: 04/2022 Machine on: 3100 h Laser on: 1860 h (!) Machine:  Feed station with self-centering clamping jaws  Tube support (raw material) with automatically retractable tube supports  Feed-through chuck with self-centering tensioning rollers  Adaptive clamping system for the feed-through chuck  Work area illumination  Tube support (finished part) with extendable guide rollers  Finished part deposit (contains one conveyor table and conveyor table extension)  High-precision drives TRUMPF laser  Excitation using pump diodes  Laser power control  Laser log function  Closed beam guidance via laser light cable (LLK) Cutting head  Lens cutting head with 150 mm focal length  Magnetic coupling Control  TRUMPF control system based on Sinumerik 840D SL  Integrated technology data  Auto switch on and shutdown  Programmable cutting gas pressure  Remote support interface  Pivoting control panel with 19” touch screen  Condition Guide Functions  AdjustLine  ControlLine  FocusLine  NitroLine  PierceLine Data transmission  USB interface  RJ45 network interface  Central Link  Online Update Manager Accessories  Clamping jaw pair up to D 152 mm  Guide rollers, round/rectangular tubes  Ceramic part (one piece)  Cutting nozzles start-up set Safety  CE marking and EC Machinery Directive  Protective cabin with laser protective screens  Monitoring system for gas pressure, temperature and cooling water  One and two-beam safety light barriers Advanced standard configuration  Machine bed for 6.5 m raw material length  LoadMaster Tube for 6.5 m raw material length (including bundle space)  Part-removal station for 3 m finished part length (including scrap conveyor belt with container) Hsdpfx Aezh H Axjaijnr  Compact dust extractor  Laser process cooler (water-air) Bevel cut technology package  Bevel cutting up to maximum 45°  Contains electrically movable feed-through chuck  Application-specific restrictions may arise depending on the respective material properties or the desired machining process Front LoadMaster Tube installation +1,5m unloading (max 4,5m)

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 22,000 h, laser type: fiber laser, laser power: 6,000 W, L5-30 L5 system with 6kW Laserpower Options: GF Grids with mild steel slats CRS Scrap collection bins SiX System control and management FLR60L 6000 W high power-density fiber laser source with cooling unit ASF Fume extraction ACUT Compressed air cutting APC2 Adaptive process control FACE.L Salvagnini HMI for managing the laser system SIMFIBER Laser cutting process simulator IOT connected Activation of cloud connection Hodpfx Aaezh Hlmeionr Cutting limits: Mild steel (S185JR,S235JR, RAEX 250 C LASER) 20 mm Stainless steel (AISI 304, X5CrNi18-10 1.4301) 20 mm Aluminum (Al 99.5 EN AW 1050A) 20 mm Copper (Cu-ETP CW004A H040 EN1652) 8 mm Brass (CuZn37 CW508L H055 EN1652) 8 mm

Condition: used, Year of construction: 2016, Amada M2 RI 3015 for sale Low hours Full service completed with Amada 4Kw Resonator Dust extraction Chiller Hsdozh E Hvopfx Aaienr Compressor Latest Amada touch screen control Erwin Sick perimeter guards Head clean system Really good machine.pplease feel free to contact me if you have any additional questions open this machine. Thankyou for taking time to look at this CO2 laser with rotary system

Condition: ready for operation (used), Year of construction: 2021, laser power: 3,000 W, number of axes: 3, Tube cutting machine manufactured in 2021. This HSG HS-TL220 features a powerful 3000 W fiber laser and a maximum no-load speed of 110 m/min. It is capable of processing round tubes with diameters ranging from Ø20 to 210 mm and square tubes from 20 × 20 mm to 150 × 150 mm. If you are looking to get high-quality tube cutting capabilities, consider the HSG HS-TL220 machine we have for sale. Contact us for further details. • Positioning accuracy: ±0.03 mm/m • Repositioning accuracy: ±0.03 mm • Maximum no-load speed: 110 m/min • Chuck rotation speed: 100 rpm • Maximum acceleration: 1.0 G Hnedpfxszdiw Hj Aaior • Material processing capacity: • Round tubes: Ø20–210 mm • Square tubes: 20 × 20 mm to 150 × 150 mm • Maximum weight of a single tube: 100 kg • Bevel cutting: No • Chuck type: Standard pneumatic chuck

Condition: new, Year of construction: 2025, Entry-level fiber laser metal sheet&tube cutting machine One machine with two uses. AT series cuts both metal sheets and metal tubes. The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Hnodpfohv U Uvex Aaijr Fast air cutting efficiency increases by 37% when cutting carbon steel. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Angle steel and channel steel cutting are standard with no need for additional installation. Condition: New Laser Type: Fiber Laser Laser Power: 1000W, 1500W, 2000W, 3000W Cutting Area: 3048*1524mm Cutting Speed: 0-100m/min Positioning accuracy: ±0.03mm Repositioning accuracy: ±0.02mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: refurbished (used), Year of construction: 2014, operating hours: 20,000 h, DG Tech – Authorized BLM Group Inspection Center DG Tech was established as a spin-off from DGService to specifically address the market for used BLM Group machines. Leveraging our experience in after-sales service and continuous technical training, we offer a comprehensive and reliable service. Hsdpfx Aszhw H Ijaionr We manage the evaluation, purchase, and refurbishment of machines, including laser source maintenance, ensuring high-quality standards. We handle logistics, disassembly, and transportation directly, eliminating the risks associated with private sales. In partnership with BLM Group, we provide dedicated software, technical training, and post-sales support. We also offer flexible operational leasing solutions to optimize investment and productivity. Configuration: BEAM LOADER L=6500mm, UNLOADER 4500 mm, ROFIN DC 020 LASER SOURCE, CHILLER, LT120 EXHAUST SYSTEM, LT120 WELDING SEARCH OPTICAL SYSTEM, INTEGRATED MICRODOSING.

Condition: good (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: 8070850, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: IPG Photonics GmbH, laser power: 4,000 W, laser wavelength: 1,070 nm, sheet thickness steel (max.): 5 mm, sheet thickness stainless steel (max.): 4 mm, sheet thickness aluminum (max.): 3 mm, sheet thickness brass (max.): 1 mm, sheet thickness copper (max.): 1 mm, overall weight: 420 kg, total length: 856 mm, total width: 806 mm, total height: 1,186 mm, Equipment: cooling unit, Technical Data Hnodozc Hpvspfx Aaior Manufacturer: IPG Laser GmbH Laser Model: YLS-4000-S2-IHE Serial Number (SN): 8070850 Rated Voltage: 400V AC +-10% 3P/PE Frequency: 50/60 Hz Full Load Current: 80 A Fuses: 80A / 120kA Date of Manufacture: 08.12.2008 Wiring Diagram: G25-16-70820-4 Cooler Wiring Diagram: G25-16-61012-4 Certification: CE marking Wavelength: 1070 nm Wavelength Bandwidth: approx. 1070 nm – 1080 nm Rated Output Power: 4.0 kW Laser Class: Class 4 Power Control: 10% to 100% Typical Fiber Diameter (Delivery Fiber): Mostly 100 µm (micrometers) Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine Purchase/Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, AMONG OTHERS. Gjbn N Ay Dowza Dxogoil Do you need a high-quality, but affordable, metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.