Used Laser Press for sale (29,163)

Condition: excellent (used), Year of construction: 2014, Operating hours: 78,000 hours 5 kW resonator Annual maintenance by Trumpf Knodpfswd Ng Ujx Afiec

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 21,346 h, laser power: 3,200 W, X working area max.: 3000 mm Y working area max.: 1600 mm Control: Rexroth IndraMotion MTX Laser power: 3000 watts Machine - Enclosed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamps and tools - Hydraulic clamps (3 pieces) - Maintenance-free three-phase motors for drives - Repositioning device with programmable hold-down - Foot pedal for clamp closing - Beam protection with direct access - Parts chute on the right - Parts flap on the left - Sensor for parts flap - Work area illumination - FocusLine - Retrofittable for SortMaster Compact - Protective tool - Transport and installation device TRUMPF Laser - Laser light cable (LLK) according to standard layout (10m) - Laser power control - Laser logbook function - Closed beam guidance via laser light cable (LLK) - Separate power supply for TruDisk Compact Cutting Unit - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Punching Head - Delta Drive - Rotatable mono-tool adapter - Programmable hold-down position Knjdpfoxhmtwox Afioc - Tool length compensation - Punch spray lubrication - Punch slug extraction - Forming function - Stroke counter for punch Control - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color screen - Integrated technology data - Programmable cutting gas pressure - Remote support interface - Auto shut-off with wake-up function - Program management - Production plan Data Transmission - USB interface - RJ-45 network interface - Central Link - Online Update Manager Safety - CE marking - Two-beam safety light curtain Extended Standard Equipment - TruDisk 3001 solid-state laser with 1 LLK output - Chiller (water-air) - Compact dust extraction system - 1st locating pin (right inside) - Ball tables - Good parts container for parts chute - Chip container for rear removal Extended Laser Equipment - Copper cutting package - Brass cutting package Extended Punching Equipment - MultiShear function - Multitool function - MultiBend function - Thread forming with thread counter Thread former breakage monitoring Lubricant level monitoring - Marking/fast embossing function - Engraving function - Deburring and roller technology function - Ejecting small parts function Parts Ejection - Integrated sorting function for parts chute • Sensor for parts chute • Tray line for 4 standard trays 300 x 400 mm • Customer-supplied trays Extended Machine Equipment - 1x additional clamp - Machine rated for ambient temperatures up to 43°C Special Sheet Metal Processing - Brush tables - Warping detection Options for Compact Dust Collector - CO2 extinguishing system for the compact dust collector Data Transmission - Wireless Operation Point Machine Accessories - 1 set RTC cassettes incl. die plate SheetMaster Compact - SheetMaster Compact 3000 x 1500 mm (AK05) • Loading station with spreader magnet for sheet separation • Suction frame • Vacuum sensor system • Double sheet detection • Unloading cart for scrap grid and microjoint sheets • 2nd operator's station for loading and unloading.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 72,918 h, laser power: 2,700 W, punching force: 22 t, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 8 mm, sheet thickness aluminum (max.): 4 mm, TECHNICAL DETAILS Combined punching/laser operation: 2,585 x 1,650 mm Punching mode: 3,085 x 1,740 mm Laser operation: 3,085 x 1,650 mm Outputs Laser power: 140 - 2,700 W Maximum sheet thickness: 8 mm Cutting capacity for mild steel: 8 mm Cutting capacity for aluminum: 4 mm Cutting capacity for stainless steel: 6 mm Maximum punching force: 220 kN Active hold-down device (programmable in stages): 4.5 - 20 kN Maximum workpiece weight: 230 kg Speeds Maximum positioning speed X-axis: 90 m/min Y-axis: 60 m/min Simultaneous (X and Y): 108 m/min C-axis punching: 60 revolutions/min Thread forming: 180 revolutions/min Punching stroke sequence (E = 1): 900 1/min Marking: 2,800 1/min Kedpfx Aow Suwyjfionc Tools Linear magazine: 18 tools with 3 clamps Tool change time: 1.5 - 5 s Tool accuracy Position deviation: ±0.10 mm Average position spread: ±0.03 mm Programmable slides for punched and laser parts (max.) Size: 500 x 500 mm TRUMPF CNC control: based on Siemens Sinumerik 840D MACHINE DETAILS Laser switch-on time: 72,918 h Cutting time: 18,536 h Space requirement (width x length): 7,900 x 9,100 mm Height: 2,400 mm Weight: 22,500 kg Laser gas consumption CO2 / N2 / He: 1 / 6 / 13 l/h Connected load: 73 kVA

Condition: used, Year of construction: 2001, operating hours: 13,030 h, machine/vehicle number: 090038, punching force: 2,200 t, We are offering our Trumatic 5000R laser punch press for sale. The machine is used and in very good condition. Basic data from the type plate: Max cutting force: 220 kN Type 9121 No. 090038 Year of manufacture: 2001, spare parts Network: 400 V/50 Hz Connected load: 29kVA Supply voltage: 400V Control voltage: 24V= Necessary protection: 3x50A Compressed air connection: 7-14 bar Machine weight: 17500kg Main features of the machine: - Tool rail - 21 tools and 4 handles - working area 3070x1660mm - max. sheet thickness 8mm - Rotation axis of the tool head C1 and C2 - Forming function - Thread function - Multibend function - Pneumatic press - automatic sliding of the details 500x500mm - water-cooled servomotors Additional equipment of the machine: - light barrier Softpunch function - Details slide sensor - Device for blowing out small details - System for chip extraction - Separate lubrication of punching and threading tools Number of NC units: 13030h We sell machines without tools. Machine regularly maintained by authorized Trumpf service with original spare parts, last machine maintenance on 21.02.2024r. Kedpfxsunh D Ds Afionc

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 17,000 h, Trumpf TruMatic 6000 FMC -1300 Sheetmaster + Gripmaster Manufacturer: Trumpf Type: TruMatic 6000 FMC -1300 Ksdpfx Aowyphdjfionc Year of manufacture: 2006 Condition: used, very good. Regularly serviced by Trumpf. Machine is powered and in use. Operating hours NC hours: 70,305h Beam-on hours: 17,217h Control: Siemens Sinumerik 840 D Punching force: 220KN Laser power: 2700W Working area for laser operation approx.: 2585 x 1280 mm Working area for punching operation approx.: 2585 x 1370 mm Max. sheet thickness approx.: 8 mm Support tables Brush tables CE marking Standard equipment: Stable, easily accessible C-frame Coordinate guide with integrated linear magazine, 21 places for tools and clamping claws 1 clamping claw Maintenance-free three-phase servo motors Parts chute 500 x 500 mm (sensor-monitored) HI-LAS high-pressure cutting TRUMPF laser: CO2 laser TLF 2700 High-frequency excitation Laser control TASC 3 Cutting head: Laser cutting head 5″ Laser cutting head 7.5″ Quick change device Cutting gas pressure setting programmable Distance control DIAS ContourLas Punching head: Hydraulic mono tool holder 360° rotation Programmable hold-down device Tool spray lubrication Punching slug extraction Control: Sinumerik 840D 10.4″ TFT color screen Teleservice Automatic switch-off 3.5″ floppy disk drive RJ45 network connection MDE interface Safety: Multi-beam light barriers Quick switch-off hydraulics Compact dust extraction system Options: Automatic switch-off Thread former Soft punch Adaptive stroke calibration Adjustment cylinder Individually openable claws Chip conveyor with container Multishear Multitool Control Brush tables Automation SheetMaster (loading and unloading during production) Scissor lift table Chip conveyor with container TrumaGripMaster TrumaSortmaster R4 TwinCarts (unloading) Spreading magnet Rotor scanner (unloading monitoring) Autolas Plus Remaining grid pallet 2500x1250mm

Condition: excellent (used), Year of construction: 2013, operating hours: 8,500 h, stroke length: 445 mm, number of axes: 6, Number of axes: 6 Pressing force: 3,200 kN Max. machining length: approx. 440 cm Weight: 22,800 kg Kodpfxewxwwdj Afionc Max. load capacity: 150 kg Runway length: 12 meters

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 97,000 h, laser power: 2,500 W, sheet thickness (max.): 6 mm, workpiece length (max.): 2,000 mm, workpiece width (max.): 1,500 mm, Submission of a bid obligates the buyer to collect the machine on time by 05/09/2025! The machine has been serviced by the manufacturer. TECHNICAL SPECIFICATIONS Power and Cutting Force Cutting force: 300 kN Power: 2.5 kW (CO₂) Workpiece Cutting elements to length: 3,020 × 1,500 mm Laser cutting length: 2,000 × 1,500 mm Max. sheet thickness: 6 mm Stations Turret station: 41 fixed and 4 rotatable stations MACHINE DETAILS Electrical Data Connected load: 400 V / 68.3 kVA Apparent power: 60 kVA Kjdpfow Axa Uox Afijnc Compressed Air Connection Compressed air connection: 8 bar Compressed air consumption: 48 m³/h Occupational Safety Width of protected area: 30 m Minimum safety distance: 1.36 m Machine reaction time + total fire protection wall reaction time: 320 ms Overrun time: 300 ms Machine braking distance: 180 mm Weight of the punching/laser machine: 30,000 kg EQUIPMENT Automatic part removal (suction cups) up to 45 kg Automatic sheet metal feed max. 3,050 × 1,500 mm Automatic bale output 1,500 × 400 mm Double loading ramp Light barrier Wire cutting kit Bale push sensor Chip extraction Conveyor for offcuts removal Separate lubrication for punching and threading tools Sheet bending sensors Punches included in the offer Loading of the machine can be arranged upon request. A large tooling package can be purchased for an additional 10,000 EUR.

Condition: good (used), functionality: fully functional, Year of construction: 2010, operating hours: 49,000 h, laser power: 2,000 W, punching force: 165 t, punching diameter: 76 mm, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 4 mm, sheet thickness aluminum (max.): 4 mm, workpiece weight (max.): 120 kg, overall weight: 13,000 kg, workpiece length (max.): 2,500 mm, space requirement length: 6,800 mm, space requirement width: 6,150 mm, working range: 2,500 mm, Equipment: cooling unit, safety light barrier, Special Equipment: + Thread forming function + Softpunch function + Height-adjustable clamping shoe + Follow-up cylinder + Vibration-damped installation + Sensor for part chute + Die spray lubrication + Loading and unloading aid with brush Standard Equipment: - Robust C-frame - Coordinate guide with integrated linear magazine - 21 stations for tools and clamping shoes - 2 clamping shoes Knsdow Au Eaopfx Afijc - Drives: maintenance-free three-phase servo motors - Brush tables - Laser TCF1 (2000W) - HI-LAS high-pressure cutting - High-speed processing with SprintLas - Programmable cutting gas selection/pressure adjustment - Laser cutting head with 5" lens - Quick-change device for cutting head - APC capacitive height control - Lens monitoring sensors - Laser logbook function - Compact dust extractor - Rotatable tool holder - Automatic follow-up device with hold-down - Automatic part chute for parts 300x500 mm - Automatic tool changer with 19 stations - 2 clamping shoes - Good parts container - Punch spray lubrication - 2nd lubricant container - Punch slug extraction - Chip bin - Hydraulic quick shutdown - External control panel - TFT color touch screen 15" - Interface for USB stick - 3.5" disk drive - Safety devices - RJ45 network connection - Network connectivity - Comprehensive operating manual - Remote diagnosis system

Condition: good (used), functionality: fully functional, Year of construction: 2008, operating hours: 41,804 h, used TRUMPF TruMatic 6000 (K01) – Medium format Technical data: Year of manufacture: 2008 Last maintenance: 18.03.2025 Operating hours NC: 41804 Resonator hours: 14466 Beam ON hours: 2054 Y-Axis: 1300 mm Additional equipment: various tools Recently installed new parts: Knjdpfowkd Efjx Afisc Conversion to laser control TASC5 (01/2025) Control panel with display (01/2025) Box PC (01/2025) Hydraulic punching head/multilayer (10/2021)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, operating hours: 13,549 h, laser power: 3,200 W, punching force: 22 t, sheet thickness (max.): 8 mm, sheet thickness aluminum (max.): 3 mm, workpiece weight (max.): 200 kg, TECHNICAL DETAILS Punching work area: 2,585 x 1,280 mm Laser working area: 3,085 x 1,370 mm Combined working area: 3,085 x 1,280 mm Control system: Siemens Sinumerik 840 D Laser power: 140 - 3,200 watts Wavelength: 10.6 µm Sheet thickness: 8 mm Cutting capacity mild steel: 8 mm Cutting capacity aluminum: 3 mm Cutting capacity stainless steel: 4 mm Workpiece weight: max. 200 kg Punching force: 220 kN Active hold-down device: 4.5 - 20 kN Linear magazine: 21 tools with 3 clamps Programmable chute: 500 x 500 mm C-axis punching: 60 rpm C-axis thread forming: 180 rpm Punching stroke sequence: 900 rpm Stroke sequence marking: 2800 1/min Compressed air connection: 7 ± 1 bar Laser gas consumption CO2 / N2 / He: 1 / 6 / 13 l/h MACHINE DETAILS Length: approx. 7.5 m Width: approx. 8.1 m Height: 2.4 m Weight: 16 tons Laser switch-on time: 49,949 h Cutting time: 13,549 h EQUIPMENT - Sturdy C-frame - 2 x clamping claws - Drives: Maintenance-free three-phase servomotors - Programmable hold-down device for repositioning - Sensor-monitored parts chutes 500 x 500 mm for punching and laser station, ejection cylinder on laser chute - 2 x good parts box - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for producing small holes - Cutting gas pressure setting programmable - Laser cutting head: 5" lens, quick-change device, distance control APC - Lens monitoring sensor system - Additional cutting head with 7.5" lens - Punching head: hydr. mono tool holder, 360° rotation for all tools, automatic tool length compensation, tool spray lubrication, 2 x lubricant containers, punching slug extraction, chip bucket - Safety: multi-beam light barriers, quick shut-off hydraulics, extraction and compact dust protection device against stray radiation on the cutting head - TLF 3200 laser incl. 9" cutting head for stainless steel - AutoLas Plus - MultiTool function - MultiBend function - Thread forming function - Marking/quick beading function - Rolling technology function - Softpunch function - 1 x additional clamping claw Knjdpfx Afsvzrb Deisc - Chip conveyor with tilting container - Brush tables with loading and unloading aid - Blow-out device for small parts - BNC network connection instead of RJ45 connection

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, operating hours: 44,973 h, laser power: 2,700 W, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 2,585 mm, travel distance Y-axis: 1,280 mm, number of slots in tool magazine: 21, AUTOMATION - SheetMaster - GripMaster - TrumaSort R4 ADDITIONAL EQUIPMENT - Laser TruFlow 2700 - MultiTool function - Thread forming function - Marking/fast beading function - MultiBend function - Rolling technology function - Repositioning cylinder - Bulge detection - Chip conveyor TECHNICAL DETAILS Punching working area: 2,585 x 1,280 mm Laser working area: 3,085 x 1,370 mm Combined working area: 3,085 x 1,280 mm Control: Siemens Sinumerik 840 D Laser Laser power: 140 - 2,700 watts Wavelength: 10.6 µm Sheet thickness: 8 mm Workpiece weight: max. 200 kg Punching Punching force: 220 kN Active hold-down clamps: 4.5 - 20 kN Linear magazine: 21 tools Programmable slide: 500 x 500 mm Positioning speed X / Y / simultaneous: 90 / 60 / 108 m/min C-axis punching: 60 rpm C-axis thread forming: 180 rpm Punching stroke sequence: 900 rpm Signing stroke sequence: 2800 rpm Knedpfxevxivms Afisc Position deviation: ± 0.10 mm Position scatter: ± 0.03 mm MACHINE DETAILS Length: approx. 7.5 m Width: approx. 8.1 m Height: 2.4 m Weight: 16 t Laser switch-on time: 29,826 h Cutting time: 6,054 h Machine switch-on time: 44,973 h Compressed air connection: 7 ± 1 bar Consumption of laser gas CO2 / N2 / He: 1 / 6 / 13 l/h EQUIPMENT - Stable, easily accessible C-frame - Drives with maintenance-free three-phase motors - Programmable hold-down device for repositioning - Sensor-monitored part slides for punching and laser station, ejection cylinder on laser slide - Laser unit: High-frequency excited CO2 laser, vibration-insulated, including cooling unit and laser control DIAS 3 - HI-Las high-pressure cutting - Fast processing with SprintLas - ContourLas for producing small holes - Programmable cutting gas pressure setting - Laser cutting head: 5'' lens, quick-change device, distance control - Multi-beam light barriers, quick hydraulic shutdown, extraction and compact dust extractor, protective device against scattered radiation on the cutting head

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 14,161 h, machine/vehicle number: A0110A0036, laser power: 2,000 W, punching force: 16 t, sheet thickness (max.): 4 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, space requirement length: 6,000 mm, space requirement width: 6,900 mm, TECHNICAL DETAILS Combined operation: 2,175 x 1,250 mm Laser operation: 2,500 x 1,250 mm Punching mode: 2,500 x 1,250 mm Outputs Maximum sheet thickness: 4 mm Maximum punching force: 165 kN Maximum workpiece weight: 120 kg Laser power: 2000 W Laser speeds X-axis: 90 m/min Y-axis: 60 m/min Simultaneous: 108 m/min C-axis punching: 60 m/min C-axis thread forming: 180 m/min Punching stroke sequence: 600 1/min Stroke sequence marking: 1,300 1/min Tools Tool positions in the linear magazine: 19 (with 2 clamps) MultiTool capacity: 2 to 10-fold Number of tools in MultiTool: 19 to 190 Rotation of all tools: 360 Tool change time: 0.9 - 3.6 s Maximum punching diameter: 76.2 mm Maximum bending height (MultiBend): 25 mm Position accuracy Position deviation: ±0.1 mm Average position spread: ±0.03 mm MACHINE DETAILS Total weight: 12,500 kg Space requirement: 6,000 x 6,900 mm Knedpfx Aevgc Apsfijc Connected load: 55 kVA Laser cutting time: 14,161 h Laser switch-on time: 63,575 h

Condition: refurbished (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: 403/FL06, laser power: 2,000 W, laser wavelength: 1,070 nm, punching force: 28 t, punching diameter: 105 mm, sheet thickness steel (max.): 15 mm, sheet thickness aluminum (max.): 6 mm, table length: 3,100 mm, table width: 4,250 mm, table height: 900 mm, No reserve price - guaranteed sale at the highest bid! Machine was overhauled by Boschert in 2022! TECHNICAL DETAILS Punching force: approx. 2 x 280 kN (28 t) Punching throat: approx. 1,750 mm Max. punching diameter: 105 mm (any shape within 105 mm) Max. sheet thickness: 6 mm (clamp opening) Max. stroke height: 90 mm (continuously programmable) Thread cutting: M3 - M12 Slide stroke: 160 mm Stroke rate (for sheet thickness 2 mm) Travel path 0.1 mm: 280 strokes/min (385 with fast hydraulics) Travel path 2.0 mm: 200 strokes/min (275 with fast hydraulics) Travel path 25.0 mm: 125 strokes/min (175 with fast hydraulics) Table dimensions Table width left + right: 4,250 mm / 3,250 mm Table depth: 3,100 mm Table height: 900 mm Laser source Model: XFocus 2000 Max. connected load: 7 kVA (100% duty cycle) Operating temperature: 5 - 40 °C (store frost-free) Air humidity: 10–95% Storage temperature: -40 - 75 °C (without water) Laser protection class: Class 4 according to DIN EN 60825-1 Sheet thicknesses Mild steel (maximum): 15 mm Mild steel (recommended): 0.5 - 10 mm Alloyed steel (maximum): 8 mm Alloyed steel (recommended): 0.3 - 6 mm Aluminum (maximum): 6 mm Aluminum (recommended): 0.3 - 4 mm Fiber laser Output power: 2,000 W Wavelength: 1,070 nm (± 10 nm) Modulation rate: 5 kHz Pilot laser power: < 1.0 mW Optical fiber: fiber cross-section 100 µm Cooler Max. connected load: 9 kVA Number of cooling circuits: 2 Design point: 33 °C Air volume: 4,000 m³/h Temperature range (operation): 10 - 40 °C (store frost-free) Storage temperature: -40 - 64 °C (without water) Coolant: DI water Pressure: max. 2 bar Flow rate: laser cooling circuit 28 l/min, head circuit 2 l/min Coolant water temperature: laser 21 °C (± 1 K), head 25 °C (± 1 K) Cooling capacity: 5.5 kW Dimensions (L x W x H): 626 x 807 x 1,362 mm Knedpfevwbrwex Afisc Mass: 340 kg (without water filling) MACHINE DETAILS Overall width: 6,500 mm Overall depth: 5,000 mm Overall height: 2,100 mm Drive power: 20 kVA (25 kVA with fast hydraulics) Machine weight: 16,200 kg Hydraulic oil filling: 115 l (160 l with fast hydraulics) Laser dimensions (L x W x H): 1,250 x 810 x 1,500 mm Laser mass: approx. 300 kg

Condition: good (used), functionality: fully functional, Year of construction: 2007, laser power: 3,200 W, X working area max.: 3085 mm Y working area max.: 1650 mm Control: Siemens Sinumerik 840 D Laser power: 3200 Watts Operating hours: Power supply 41,117 h Laser ready 37,005 h Laser beam on: 7,365 h Standard equipment: - Hi-Las high-pressure cutting - Laser cutting head with 5'' lens - Laser cutting head with 7.5'' lens - Quick-change device for cutting heads - Programmable cutting gas selection/pressure setting - Capacitive height control (DIAS III) - ContourLas function - Slag cone detection - Compact dust extractor - Tank heater - Automatic tool changer with 17 stations (21 – clamping claws) - 3 clamping claws - Rotation of all tools - NC-controlled, digital, maintenance-free three-phase drives - Automatic repositioning - Tool length compensation - Fast shutoff of hydraulics - Automatic shutdown - Automatic part slides, each 500 x 500 mm - Sensors for both part slides - 2 good-part bins - Scrap slug extraction - Forming capability - Programmable punching tool lubrication - Programmable hold-down device - Adaptive stroke length control - Safety devices - Remote diagnostics unit Kedpfx Aow I Rq Ijfienc - RJ 45 network connection - 3.5'' floppy disk drive + Warp detection + Blow-off device for small parts + AutoLas Plus (FocusLine) + Function for deburring and roller technology + Function for thread forming with thread former breakage monitoring + MultiShear function + MultiTool function + Marking/fast beading function + Softpunch function + Low-scratch processing + Repositioning cylinder + Vibration-damped installation + Chip conveyor with tipping container + Additional clamping claw Automation: + Peeling system + GripMaster (3000 x 1500 mm) + SheetMaster (3000 x 1500 mm) + Lift table (300 mm)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, operating hours: 11,676 h, machine/vehicle number: KM-1148, laser power: 3,200 W, punching force: 22 t, punching diameter: 76 mm, sheet thickness (max.): 8 mm, workpiece weight (max.): 230 kg, workpiece length (max.): 1,650 mm, workpiece width (max.): 2,585 mm, No reserve price - guaranteed sale at the highest bid! Machine including SheetMaster and TrumaGrip TECHNICAL DETAILS Punching force: 22 tons Control: Siemens Sinumerik 840 D Punching working area: 3,085 x 1,740 mm Combined working area: 2,585 x 1,650 mm Max. sheet thickness: 8 mm Max. workpiece weight: 230 kg Max. punching diameter: 76.2 mm Rapid traverse X / Y / simultaneous: 90 / 60 / 108 m/min Tool holder: Hydraulic mono tool holder, 360° rotation Holder: Programmable for repositioning processes Chip handling: Chip bucket Knedpfxov Am Twe Afisc Laser unit: High-frequency excited CO₂ laser TruFlow Laser working area: 3,085 x 1,650 mm Laser power: 2,700 Watt Laser cutting heads: 5" lens, 7.5" lens, cutting head quick-change device Distance control: DIAS Cutting technology: HI-LAS high-pressure cutting Functions: AutoLas, ContourLas Laser control: TASC 3 MACHINE DETAILS Width: 2,400 mm Length: 8,700 mm Height: 7,800 mm Total weight: 22,500 kg Switch-on time: 59,2344 h Laser cutting time: 11,676 h EQUIPMENT - Parts chute 500 x 500 mm, sensor-monitored - 2 good parts boxes - AutoLas - Ejection cylinder on laser chute - Automatic tool length compensation - Tool spray lubrication - Punch slug extraction - 2nd lubricant container - Multi-beam Light barriers - Quick shutdown hydraulics - Extraction and compact dust extractor - MultiTool function - Thread forming function - Vibration-damped installation - Brush tables - Chip conveyor with tilting container - Standard equipment SheetMaster 1606 - Loading station with spreading magnets - TRUMAGRIP scrap skeleton disposal unit with scissor lift table - Sheet thickness gauge for double sheet control - Suction plate module - Parts conveyor belt A deposit of EUR 7,500 is required for transport security.

Condition: like new (used), Good parts conveyor belts for TruMatic 7000 / 6000 Kjdpfx Afju S Ny Tsisnc Very good condition

Year of construction: 2006, operating hours: 46,547 h, condition: excellent (used), functionality: fully functional, Laser punch press Trumpf TruMatic 6000 L with TrumaLift SheetMaster, ToolMaster and GripMaster as well as and scissor lift table. Knedpfxsn Nxw De Afioc SheetMaster: not only loads and unloads the machine, it also sorts the parts the parts reliably ToolMaster: automatically changes the tools quickly, safely and conveniently GripMaster: reliably moves residual grids and strips TECHNICAL DETAILS working area: 2585 x 1280 mm Control: Siemens Sinumerik 840 D laser power: 3200 watt sheet thickness mild steel: max. 8 mm sheet thickness stainless steel: max. 8 mm sheet thickness aluminum: max. 4 mm workpiece weight: max. 200 kg Accuracy: +/- 0.1 mm Punching force: 22 t punching diameter: max. 76,2 mm C-axis punching: 330 rpm stroke sequence: 450 - 1000 1/min stroke sequence marking: 2800 1/min MACHINE DETAILS Laser switch-on time: 46,547 h cutting time: 23.580 h length: 7500 mm width: 8100 mm height: 2400 mm Weight: 16000 kg (basic machine) Operating voltage: 400 V / 50 Hz Connected load: 76 kVA

Condition: good (used), functionality: fully functional, Year of construction: 2014, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control: IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Coordinate guide for high-precision machining - Stable, easily accessible C-frame - Linear magazine with 21 tool positions and 4 clamps - Drives with maintenance-free three-phase servo motors - Repositioning device with programmable hold-down device - Foot switch for clamp closing - Ball tables - 2 part flaps 500 mm x 500 mm - FocusLine - NitroLine - FastLine - Ejection cylinder for laser parts - Slag cone detection TRUMPF laser - TruDisk 3001 solid-state laser with 1 LLK outlet - Excitation via pump diodes - LLK according to standard layout (10m) - TruControl laser control 1000 - Cooling unit - Laser logbook function Cutting head - Solid-state laser compact cutting unit - ControlLine Punching head - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down device (active / passive / repositioning) - Punch stroke counter and thread stroke counter - Spray lubrication of punch - Punch slug extraction - Calculation of filling level in the punching console - Level monitoring of thread forming and tool lubrication Control - Open control based on Rexroth IndraMotion MTX - Control panel with 17" touch control panel - Program management - Production plan - Integrated technology data - Teleservice via Internet - Programmable cutting gas pressure - Automatic switch-off with wake-up mode Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Two-beam light barriers - Monitoring system for, among others Gas pressure, temperature, cooling water - Quick shutdown hydraulics - Protection against scattered radiation - Compact dust extraction system - MultiTool function - MultiBend function - Thread forming function Kedpfxewld Suj Afisnc - Engraving function - Deburring and rolling technology function - SoftPunch function - StripLine - Lowerable die - Spray lubrication die including level monitoring - Additional clamping claw - 4 pcs. Height-adjustable clamping claws - Vibration-damped installation - Chip conveyor with tilting container - Blow-out device for small parts - Warping detection SheetMaster - Unloading platform - Suction frame with 36 suction cups - Peeling suction cup - Vacuum sensors for each suction cup - Double sheet detector for double sheet control - Central lubrication - TRUMPF control based on Rexroth IndraMotion MTX - Automatic clamp closing machine - Loading and unloading parallel to production time - Peeling system including positioning aid medium format (2500x1250) - First additional suction cup package standard - Second additional suction cup package standard - Unloading monitoring laser parts GripMaster - Parts conveyor belt punching station - Parts conveyor belt laser station ToolMaster with 70 stations (only for punching operation) - ToolMaster set-up parallel to production time

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, operating hours: 44,973 h, laser power: 2,700 W, punching force: 22 t, working range: 2,500 mm, Equipment: cooling unit, safety light barrier, Description X working range max.: 2585mm Y Working range max.: 1280mm Control: Siemens Sinumerik 840 D Laser power: 2700 Watt Laser beam on: 6054 hours Laser on: 29826 hours Operating hours: 44973 hrs. Standard equipment: - Sturdy C frame - Coordinate guide with integrated linear magazine, 21 places for tools and clamping claws - Drives: Maintenance-free three-phase servomotors - Programmable hold-down device for repositioning - Sensor-monitored 500x500mm parts chutes for punching and laser station, ejection cylinder on laser chute - Laser unit: High-frequency excited CO2 laser TLF 2700W, vibration-insulated, integrated in machine frame, incl. cooling unit and DIAS 3 laser controller - HI-Las high-pressure cutting - Fast processing with SprintLas - ContourLas for producing small holes - Cutting gas pressure setting programmable - Laser cutting head: 5'' lens, quick-change device, distance control - Sinumerik 840D control system, 10.4'' TFT color screen, simple operation, online help, diagnostic functions, maintenance logbook, technology data, job tables, Teleserice, 3.5'' floppy disk drive, RJ45 network connection Safety: Multi-beam light barriers, quick shut-off hydraulics, suction and compact dust extractor, protective device against stray radiation on the cutting head + TLF 2700 laser + Thread forming function + MultiTool function + Signing / fast beading function + MultiBend function + Rolling technology function + Repositioning cylinder Knsdpjtpguzefx Afioc + bulge detection + Chip conveyor automation + Sheetmaster + Gripmaster + Trumasort R4

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 48,000 h, machine/vehicle number: A0230A1295, laser power: 5,000 W, sheet thickness steel (max.): 25 mm, sheet thickness aluminum (max.): 12 mm, No minimum selling price - guaranteed knockdown to the highest bid! TECHNICAL DETAILS Make: TRUMPF Type: Trumatic L 3050 - 5 kW Year of manufacture: 2006 Working range X-axis: 3,000 mm Y-axis: 1,500 mm Z-axis: 115 mm Control system Type: Siemens Sinumerik 840 D Laser power Laser power: 5,000 W Max. Sheet thickness: Mild steel 25 mm Max. Sheet thickness: Stainless steel 20 mm Max. Sheet thickness: aluminum 12 mm Operating hours Operating hours: approx. 48,000 hours EQUIPMENT Closed machine frame with integrated laser unit Laser unit: TLF 5000 CO₂ laser, high-frequency excited, cooling unit, logbook function Automatic pallet changer Longitudinal conveyor belt for small parts/waste Drives: Gantry drive in combination with linear direct drives Laser power control HI-LAS high-pressure cutting Plasma sensor system (PMS) Fast processing with SprintLas ContourLas for the production of small holes Programmable power cycles Microweld Programmable cutting gas pressure setting Laser cutting head with 5" lens and laser cutting head with 7.5" lens Quick-change cutting head device Automatic sheet outer edge detection Capacitive height control (DIAS) Knsdpfeu R Sa Ajx Afiec Process Control System (PCS) Position laser diode Automatic switch-off Work area lighting SIN 840D control system: Open control system on PC basis, simple operation, online help, diagnostic functions, maintenance logbook, technology data, teleservice Workshop programming ToPs 100 lite Safety and security Multi-beam light barriers Beam guidance completely encapsulated and ventilated with nitrogen Monitoring system Multi-chamber extraction and compact dust extractor Protective cabin Network connection BNC/RJ-45 network connection Electrical equipment Voltage: Three-phase current 400 V / 50 Hz EXTENDED EQUIPMENT Liftmaster included

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 47,000 h, laser power: 2,000 W, punching force: 76 t, workpiece weight (max.): 120 kg, working range: 2,500 mm, Equipment: cooling unit, safety light barrier, Special features: + Thread forming function with thread breakage detection Kodpowcq Hgefx Afisnc + MultiTool function + Marking/Fast beading function + Repositioning cylinder + Sensor for part chute Standard features: - Stable C-frame - Coordinate guide with integrated linear magazine - 21 pockets for tools and clamps - 2 clamps - Drives: maintenance-free three-phase servo motors - Brush tables - TCF1 laser (2000W) - HI-LAS high-pressure cutting - Fast machining with SprintLas - Programmable Cutting gas selection/pressure adjustment - Laser cutting head with 5" lens - Cutting head quick-change device - APC capacitive height control - Lens monitoring sensors - Laser logbook function - Compact dust extractor - Rotating tool holder - Automatic repositioning device with hold-down clamp - Automatic part chute for parts 300x500 mm - Automatic tool changer with 19 stations - 2 clamps - Good parts container - Spray lubrication for punches - 2nd lubricant container - Punch slug extraction system - Chip bucket - Hydraulic quick shut-off system - External control panel - 15" TFT touch color screen - USB stick interface - 3.5" floppy disk drive - Safety features - RJ45 network connection - Network connection - Detailed operating instructions - Remote diagnostics system

Year of construction: 2015, condition: used, functionality: limited functionality, machine/vehicle number: (QEV111AHE1VM), "Laser printing technology – monochrome- We have 2 pieces available of this model with similar characteristics: Monthly duty cycle (max.) 200000 images Maximum copy speed Up to 45 pages per minute Maximum print resolution Up to 1200 x 1200 dpi Maximum print speed Up to 45 pages per minute Maximum media capacity 2300 sheets Output trays capacity 500 sheets" Please state your offer price. Price without packaging and transportation; Payment in advance. You need to make us a price offer if you are interested about the machine. Ksdpfxjxnxrrj Afijnc The hand over will be at our location Terms of delivery: EXW Sebes, Romania The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane

Condition: new, Fully automated system Energy saving Industry 4.0 Durma Cloud Fiber Laser Technology Environmental awareness Synchronous minimum working range High precise repeatability High process accuracy Compact layout Low noise level Simple and fast installation Knjdpfx Afeg Adn Ioiec On request we will send you information material

Condition: new, Year of construction: 2025, AHB-20A Knsdpsk Razqjfx Afijc screw compressor special for laser machine double use 8 till 16 bar G3/4 connection 380 volt 3 phase 50Hz air delivery 1,2 m3/min Tank 500 l High Efficiency Refrigerated Air-dryer include High Efficiency Precision Filters include Air supply without oil and water two stge screw type INCLUDE IN THE PRICE: 1 airfilter ( have to change after 3000 hours ) 2 oil filters ( 1 change after 500 hour second after 3000 hours ) 1 separator ( change after 3000 hours ) Advantanges High Pressure Screw Air Compressor SPECIAL FOR LASER MACHINES Integrated Design Air compressor, air dryer, air tank and line filters integration. Avoid the trouble to connect the pipes, can use it after power on. Air Supply Without Oil and Water The compressed air contains oily water mist and oil, and high-pressure spraying on the protective mirror will seriously affect the transmission of the laser beam, disperse the focus, cause the product to be cut through, and produce waste. Intelligent Monitoring ( option ) Smart housekeeper remote monitoring, 24-hour online monitoring, no need for special management to open the phone to quickly obtain machine operation information, When the machine encounters a malfunction or needs maintenance, the system will automatically send an early warning message. High Quality Spare Parts High-End Air End The double screws adopts the latest line design, high-precision processing, reduces the leakage of compressed air, reduces power consumption, and saves money for customers. Imported Electronic Accessories Imported electronic components, high protection and safety level, to ensure the stable operation of the equipment, and the electrical part is enlarged by 30-50%. High Efficiency Precision Filter Using high-precision and high-pressure-resistant filters, multiple filtrations to ensure that the gas supply is oil-free and water-tree, ensuring production. Large Capacity Air Tank Large capacity, more energy-saving and electricity-saving, thicker material, buffering, cooling, water removal, and stable air pressure. FOR MORE INFORMATION PLS TAKE CONTACT WITH US. J.C. Helthuis Denekamp Netherlands

Condition: new, Year of construction: 2025, AHB-20A screw compressor special for laser machine double use 8 till 16 bar G3/4 connection Knodpem E Im Tjfx Afiec 380 volt 3 phase 50Hz air delivery 1,2 m3/min Tank 500 l High Efficiency Refrigerated Air-dryer include High Efficiency Precision Filters include Air supply without oil and water two stge screw type INCLUDE IN THE PRICE: 1 airfilter ( have to change after 3000 hours ) 1 oil filters ( 1 change after 500 hour second after 3000 hours ) 1 separator ( change after 3000 hours ) Advantanges High Pressure Screw Air Compressor SPECIAL FOR LASER MACHINES Integrated Design Air compressor, air dryer, air tank and line filters integration. Avoid the trouble to connect the pipes, can use it after power on. Air Supply Without Oil and Water The compressed air contains oily water mist and oil, and high-pressure spraying on the protective mirror will seriously affect the transmission of the laser beam, disperse the focus, cause the product to be cut through, and produce waste. Intelligent Monitoring ( option ) Smart housekeeper remote monitoring, 24-hour online monitoring, no need for special management to open the phone to quickly obtain machine operation information, When the machine encounters a malfunction or needs maintenance, the system will automatically send an early warning message. High Quality Spare Parts High-End Air End The double screws adopts the latest line design, high-precision processing, reduces the leakage of compressed air, reduces power consumption, and saves money for customers. Imported Electronic Accessories Imported electronic components, high protection and safety level, to ensure the stable operation of the equipment, and the electrical part is enlarged by 30-50%. High Efficiency Precision Filter Using high-precision and high-pressure-resistant filters, multiple filtrations to ensure that the gas supply is oil-free and water-tree, ensuring production. Large Capacity Air Tank Large capacity, more energy-saving and electricity-saving, thicker material, buffering, cooling, water removal, and stable air pressure. FOR MORE INFORMATION PLS TAKE CONTACT WITH US. J.C. Helthuis Coevorden Netherlands