Condition: ready for operation (used), Year of construction: 2012, operating hours: 70,936 h, clamping force: 4,200 kN, screw diameter: 80 mm, This Krauss Maffei 420 - 4300 CX hydraulic injection moulding machine was manufactured in 2012. It features a clamping force of 4200 kN and a platen size of 1200 mm x 1200 mm. The machine includes an injection unit with a screw diameter of 80 mm and an injection pressure of 2205 bar. Consider the opportunity to buy this Krauss Maffei 420 - 4300 CX hydraulic injection moulding machine. Contact us for further details. • Tie bar spacing (H x V): 800 x 800 mm • Platen dimensions (H x V): 1200 x 1200 mm • Mold installation height (min): 380 mm • Opening stroke: 1020 mm • Daylight (platen distance): 1400 mm • Max. mold weight: • Fixed side (DS): 3350 kg • Moving side (AS): 4460 kg • Total listed: 6700 kg • Ejector: • Stroke: 250 mm • Force: 95 kN • Retraction force: 48 kN • Pneumatic ejector: No • Core pulls: 2 on moving side (AS) + 2 on fixed side (DS) • Shut-off nozzle: 2-fold hydraulic cascade • Injection unit 1: • Type: SP 4300 • Screw diameter: 80 mm • Injection pressure: 2205 bar • Stroke volume: 1810 ccm • Shot weight (PS): 1647 g • Injection flow (PS): 498 g/s • Plasticizing flow: 106 g/s • Screw L/D: 22.5 • Nozzle radius: 12 mm • Armored injection unit: Yes Additional equipment • KM Linear robot, built in 2021 • Hot runner control, 12-zone Guodpjyhby Hofx Agfsa • Mold sensors: Priamus (p=2 / t=0)

Condition: ready for operation (used), Year of construction: 2017, operating hours: 44,678 h, clamping force: 2,500 kN, This Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine was manufactured in 2017. It features a clamping force of 2500 kN and a maximum mold weight of 3430 kg. The machine includes a linear robot LRX 150 for enhanced automation. Consider the opportunity to buy this Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine. Contact us for further details. • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions: 995 x 1050 mm • Mold installation height (min): 330 mm • Platen distance: 1150 mm • Max mold weight: 3430 kg total (fixed: 1715 kg / moving: 2286 kg) • Core pull control: 4 units (2 x fixed platen/FAP; 2 x moving platen/BAP) • Shut-off nozzle: 4-fold hydraulic cascade • Injection unit 1 (code 1000): • Screw diameter: 55 mm • Injection pressure: 1904 bar • Stroke volume: 523 ccm • Shot weight (PS): 476 g • Injection flow (PS): 404 g/s • Armored unit: Yes (ZE 33.00) • Printer interface: Yes • Condition: Well-maintained and serviced Additional equipment Gjdpfx Ajyhbq Eegfeua • Automation: Linear robot LRX 150 with B/C axis combination (KM Linear Robot LRX 150 included) • Hot runner control: 12-fold • Cooling: 4 x HB 100

Condition: used, Year of construction: 2007, operating hours: 67,000 h, clamping force: 250 kN, displacement volume: 530 cm³, injection pressure: 2,426 bar, overall weight: 14,200 kg, screw conveyor diameter: 50 mm, Freight base: FCA Pegnitz Guedpfewlkcaox Agfea Delivery time: by arrangement Payment terms: 100% before takeover of the machine, net

Condition: used, Year of construction: 2011, operating hours: 40,885 h, overall weight: 6,500 kg, displacement volume: 49 cm³, clamping force: 110 kN, injection pressure: 2,236 bar, screw conveyor diameter: 18 mm, terms of delivery: EXW (ex Works) Gujdpfx Agow N Egasfsa delivery time: on request terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2007, operating hours: 70,000 h, clamping force: 120 kN, displacement volume: 154 cm³, injection pressure: 2,175 bar, overall weight: 7,300 kg, screw conveyor diameter: 35 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Manufacturer: Engel Type: VC Tech + ERC23/1-F Condition: aus laufender Produktion Operating hours: ca. 70.000 CLAMPING UNIT: - Clamping force: 120 t Öffnungsweg: 500 mm Mould installation height min.: 300 mm Mould installation height max.: - Plate dimension (h x v): 790 x 680 mm Centering (fix- movingplate): 125/125 mm INJECTION UNIT: SPE330 Screw diameter: 35 mm Injection weight in polystyrol: 141 g Stroke volume: 154 cm³ Einspritzdruck: 2.175 bar CONTROL: CC200 Screen language: DE Operating manuel: DE Guodpfx Ageqy Uklsfoa EQUIPMENT: - Core pulls: 2 Air valves: ja Hot runner control devices: - Robot interface: Engel integrated Other equipment: inkl. ERC 23/1-F mit integrierten Ablageband (Bediengegenseite) +750mm, Nadelverschluss (hydr. + pneumat.), Schnittstelle Farbdosierer und Temperiergerät. GENERAL DATA: - Installed heating capacity: 9,2 kW Pump drive power: 15 kW Total installed power: Motor + Heizung Total weight: 7.300 kg Total size L x B x H: 4,4 x 1,4+0,8 x 2,0 m

Condition: used, Year of construction: 1998, operating hours: 60,000 h, clamping force: 50 kN, displacement volume: 490 cm³, injection pressure: 2,000 bar, overall weight: 2,300 kg, screw conveyor diameter: 25 mm, terms of delivery: FCA Pegnitz delivery time: on request Gjdpfx Aoxa Htzsgfjua terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2020, operating hours: 4,200 h, clamping force: 90 kN, displacement volume: 113 cm³, injection pressure: 2,400 bar, overall weight: 7,500 kg, screw conveyor diameter: 30 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Gjdpfx Agov S H N Rjfjua

Condition: used, Year of construction: 2005, operating hours: 81,700 h, clamping force: 45 kN, displacement volume: 69 cm³, injection pressure: 2,400 bar, overall weight: 3,300 kg, screw conveyor diameter: 25 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: % prior to delivery Manufacturer: Engel Type: VICTORY 200/45 Tech + er/usp Condition: aus laufender Produktion Operating hours: ca. 81.700 CLAMPING UNIT: - Clamping force: 45 t Öffnungsweg: 355 mm Mould installation height min.: 175 mm Mould installation height max.: - Tie bar distance (h x v): holmlos Gusdpjrbqtnsfx Agfja Plate dimension (h x v): 550 x 430 mm Centering (fix- movingplate): / mm INJECTION UNIT: IU200 Screw diameter: 25 mm Injection weight in polystyrol: 63 g Stroke volume: 69 cm³ Einspritzdruck: 2.400 bar CONTROL: CC Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 1 Air valves: - Hot runner control devices: - Robot interface: Angußpicker er/usp Other equipment: Nadelverschl. Hydr., Schnittstelle Dosier- und Temperiergerät GENERAL DATA: - Installed heating capacity: 6,8 kW Pump drive power: 11 kW Total installed power: Motor + Heizung Total weight: 3.300 kg Total size L x B x H: 3,3 x 1,2 x 2,2 m

Condition: used, Year of construction: 2001, operating hours: 60,790 h, clamping force: 60 kN, displacement volume: 224 cm³, injection pressure: 2,224 bar, overall weight: 3,350 kg, screw conveyor diameter: 18 mm, Min. mold height 15mm_Max. platen distance 575 + mm Payment: 100% prior to delivery Manufacturer: Battenfeld Type: BA600-50CDC Condition: überarbeitet Operating hours: 60.790 CLAMPING UNIT: - Clamping force: 60 t Öffnungsweg: 425 mm Guedpfxsh Tk Rvo Agfja Mould installation height min.: 350 mm Mould installation height max.: - Tie bar distance (h x v): 320 x 320 mm Plate dimension (h x v): 490 x 490 mm Centering (fix- movingplate): 125 / 125 mm INJECTION UNIT: IU50 Screw diameter: 18 mm Injection weight in polystyrol: 20,4 g Stroke volume: 22,4 cm³ Einspritzdruck: 2.224 bar CONTROL: Unilog 4B Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: ! Air valves: - Hot runner control devices: - Robot interface: Euromap 12 GENERAL DATA: - Installed heating capacity: 3,6 kW Pump drive power: 11,0 kW Total installed power: Motor + Heizung Total weight: 3.350 kg Total size L x B x H: 4,0 x 1,5 x 2,1 m

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, clamping force: 1,470 kN, screw diameter: 50 mm, injection pressure: 2,000 bar, opening stroke: 500 mm, overall weight: 7,000 kg, Offered for sale: Krauss Maffei KM 150-1000 C1 injection moulding machine, year 1997, equipped with WITTMANN W711 Cartesian robot for automatic part extraction. Main specifications: Guodpjyn Ilvsfx Agfea Clamping force: 150 tons (≈1470 kN) Model: KM 150-1000 C1 Year of manufacture: 1997 Includes integrated WITTMANN W711 robot The machine is configured for industrial production and features an automatic handling system with a WITTMANN W711 robot, ideal for processes requiring automatic extraction and reduced cycle times. Suitable for manufacturing medium-sized technical parts in PP, PE, ABS, or other common thermoplastics. Available for inspection in Albacete, Spain. Additional technical information and operational video can be provided upon request.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, clamping force: 1,470 kN, Krauss Maffei KM 150-1000 C1 injection moulding machine from 2003, equipped with a WITTMANN W620 Cartesian robot for automatic part removal. Clamping force: 150 tons (≈1470 kN). This machine is suitable for producing medium-sized technical parts using standard thermoplastic materials such as PP, PE, or ABS. Fully industrial setup with automated system via WITTMANN robot. Available for inspection in Albacete (Spain). Guodpfjyn Im Hsx Agfea Additional technical information and operating video can be provided upon request.

Condition: excellent (used), Year of construction: 2014, Engel for silicone Insert 500V/shuttle Clamping force 100 tons Godoy Aib Nspfx Agfjua Year of manufacture 2014

Condition: good (used), Year of construction: 2013, operating hours: 52,398 h, Brand: Dr. Boy GmbH & Co. KG Model: BOY XS Year of manufacture: 2013 Operating hours: 52,398 Screw diameter: 14 mm Gsdeyz T D Espfx Agfsua Max. injection pressure: 2,298 bar Max. shot volume: 6.1 cm³ Clamping force: 10 t Max. distance between tie bars: 160 mm Min. mould height: 100 mm Max. daylight between platens: 250 mm Dimensions: 1,500 x 550 x 1,400 mm Weight: 400 kg Options: • Connected load: 3.0 kW

Condition: like new (used), Year of construction: 2024, functionality: fully functional, total height: 1,960 mm, screw diameter: 53 mm, total width: 1,590 mm, total length: 6,240 mm, injection pressure: 1,700 bar, clamping force: 2,600 kN, YIZUMI UN260SKIII-1000IU(D53) – Injection Moulding Machine Title YIZUMI UN260SKIII Injection Moulding Machine, 260 Ton, 2024, Like New, with Vacuum Loader, Volumetric Doser and Integrated Hot Runner Controller Price EUR 42,000 excl. VAT Description YIZUMI UN260SKIII-1000IU(D53) plastic injection moulding machine for sale. The machine is in like-new condition, with only a few operating hours. It is fully functional and immediately ready for production. Features include a 53 mm C-grade bi-metallic screw and barrel, integrated 4-zone hot runner controller, KEBA i1180 control system, servo drive and pump, automatic mould height adjustment, T-slot platens, by-pass filtration, one set of hydraulic core pulling on both fixed and moving platen with EUROMAP 13 interface, EUROMAP 67 interface and switch, air valve on each platen, water manifold 4 in/4 out on fixed platen, hopper slider with bearings, computer-controlled back pressure regulation, solid-state relay temperature control, and oil cooler water management via ball valve. Sale also includes 1 × Yizumi YA-X800G2 hopper loader and 1 × Yizumi YAM-14MX volumetric doser. Technical Specifications Model: UN260SKIII-1000IU(D53) Machine type: Plastic injection moulding machine Series: SKIII Series, General Purpose Injection Moulding Machine Clamping force: 2600 kN / 260 metric tons Screw diameter: 53 mm Screw type: C-grade bi-metallic Controller: KEBA i1180 Hot runner controller: Integrated, 4 zones, KEBA, EU14 / 2 kW Voltage: 400V / 3PH / 50Hz Platen type: T-slot drive system: servo motor & pump Automatic mould height adjustment: Yes Core pulling: 1 set on fixed and moving platen, EUROMAP 13 interface Robot interface: Power socket 3ph, 32A, 380V, 5-pole for robot arm Air valve: 1 set on each platen (PF and PM) Water manifold: 1 set, 4 in/4 out on fixed platen Back pressure control: Computer controlled Oil cooler: Water control by ball valve Temperature control: Solid-state relay Packing: Standard export packaging Condition: Like new, few operating hours Year: 2024 Location: Asenovgrad, Bulgaria Price basis: FOB Asenovgrad, Bulgaria, excl. VAT Godpfx Aoyz Slhegfeua Included in this sale 1 × Yizumi YA-X800G2 hopper loader 1 × Yizumi YAM-14MX volumetric doser Integrated 4-zone hot runner controller Series Features The YIZUMI SKIII series is positioned as a general-purpose servo-hydraulic injection molding machine range, with clamping forces from 900 up to 10,000 kN. According to Yizumi, the SKIII series emphasizes efficiency, energy savings, stability, and enhanced user experience. Official materials also showcase standard T-slots, an upgraded injection unit with linear guide rails, optimized clamping unit design, and an advanced KEBA control system.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, clamping force: 2,600 kN, screw diameter: 60 mm, injection pressure: 1,850 bar, injection weight: 720 g, total length: 6,329 mm, total width: 1,542 mm, total height: 2,071 mm, pressure: 175 bar, closing stroke: 525 mm, Lanson GT3-LS260S – Injection Moulding Machine Title Lanson GT3-LS260S Injection Moulding Machine, 260 Ton, 2024, Excellent Condition, with Vacuum Loader and Doser Price EUR 33,100 Description For sale: Lanson GT3-LS260S plastic injection moulding machine, purchased new in 2024. The machine is in excellent condition, professionally serviced, fully operational, and ready for immediate use in production. Approximate shot count is around 50,000 cycles. The machine features a 60 mm reinforced screw for glass fibre, B type screw, hydraulic safety door, two air blow circuits, and a high-mixing screw. Included in the sale: 1 × WSAL-1.5HP vacuum loader and 1 × VCM-20 masterbatch volumetric doser dispenser. Nameplate verifies model GT3-LS260S with a production date of 2024.09. Technical Specifications Model: GT3-LS260S Machine type: Plastic injection moulding machine Series: GT3-S Gsdeyz Sfzepfx Agfsua Clamping force: 2,600 kN Clamping tonnage: approx. 260 ton International size rating: 2600-1462 Screw diameter: 60 mm Screw type: B screw, reinforced screw for glass fibre Screw L/D ratio: 21.0 Shot volume: 792 cm³ Shot weight (PS): 720 g Plasticising capacity (PS): 53.0 g/s Injection pressure: 185 MPa Screw speed: 210 rpm Mould opening stroke: 525 mm Tie bar spacing: 580 × 580 mm Platen size: 875 × 875 mm Minimum mould height: 250 mm Maximum mould height: 630 mm Ejector stroke: 160 mm Ejector force: 67 kN Number of ejectors: 13 Hydraulic system pressure: 17.5 MPa Pump motor power: 32 kW Heater power: 15.4 kW Hydraulic oil tank capacity: 530 L Machine dimensions (L×W×H): 6,329 × 1,542 × 2,071 mm Machine weight: 8.0 ton (according to catalogue) Nameplate weight: 8,200 kg Year: 2024 Condition: Excellent, serviced, ready for operation Included in this sale 1 × WSAL-1.5HP Vacuum Loader 1 × VCM-20 Masterbatch Volumetric Doser Dispenser

Condition: excellent (used), Year of construction: 2006, clamping force: 500 kN, screw diameter: 22 mm, clearance between the columns: 355 mm, displacement volume: 41 cm³, injection pressure: 2,800 bar, injection weight: 37 g, mold height (min.): 210 mm, Clamping force: 50 t Year of manufacture: 2006 Injection unit .../200 Screw diameter: 22 mm Gedpfx Aoyz Sd Dogfjua Specific injection pressure: 2800 bar Injection volume: 41.8 ccm Mould clamping system 50/... Clamping force: 50 t Mould plate dimensions: 520 x 520 mm Tie bar clearance: 355 x 355 mm Mould height: 210 mm Opening stroke: 400 mm Maximum platen distance: 610 mm Weight: 2700 kg Dimensions (m) L x W x H: 3.8 x 1.1 x 2.1 m Control: NC4

Condition: like new (used), Year of construction: 2024, functionality: fully functional, clamping force: 900 kN, screw diameter: 35 mm, injection pressure: 1,750 bar, injection weight: 135 g, total length: 4,080 mm, total width: 1,142 mm, total height: 1,874 mm, pressure: 160 bar, closing stroke: 320 mm, Lanson GT3-LS90S – Injection Moulding Machine Title Lanson GT3-LS90S Injection Moulding Machine, 90 Ton, 2024, Excellent Condition, with Vacuum Loader and Doser Price EUR 17,500 Description For sale: 2024 Lanson GT3-LS90S plastic injection moulding machine. Purchased new in 2024, in excellent condition, serviced, fully operational, and ready for immediate production. Estimated production history is approximately 50,000 shots. The machine is fitted with a 35 mm B screw, hydraulic safety door, two sets of air blowers, and a high-mixing screw. Included in the sale: 1 × WSAL-1.5HP vacuum loader and 1 × VCM-20 masterbatch volumetric doser dispenser. Technical Specifications Model: GT3-LS90S Machine Type: Plastic Injection Moulding Machine Series: GT3-S Clamping Force: 900 kN Approximate Clamping Tonnage: 90 ton International Size Rating: 900-262 Screw Diameter: 35 mm Screw Type: B Screw Screw L/D Ratio: 20.1 Shot Volume: 149 cm³ Shot Weight (PS): 135 g Plasticizing Capacity (PS): 21.1 g/s Injection Pressure: 175 MPa Screw Speed: 330 rpm Mould Opening Stroke: 320 mm Tie Bar Spacing: 360 × 360 mm Platen Size: 550 × 550 mm Minimum Mould Height: 185 mm Maximum Mould Height: 385 mm Ejector Stroke: 100 mm Ejector Force: 31 kN Number of Ejectors: 5 Hydraulic System Pressure: 16 MPa Pump Motor Power: 14 kW Heater Power: 6.1 kW Gujdpfoyz Sb Nex Agfja Oil Tank Capacity: 220 L Machine Dimensions: 4080 × 1142 × 1874 mm Machine Weight: 3.0 ton Year: 2024 Condition: Excellent, serviced, ready for operation Included in This Sale 1 × WSAL-1.5HP Vacuum Loader 1 × VCM-20 Masterbatch Volumetric Doser Dispenser

Condition: excellent (used), Year of construction: 2016, Clamping force (kN): 1600 Opening stroke (mm): 460 Mould height (min–max) (mm): 250 – 600 Platen size (mm): 760 × 760 Tie bar distance (mm): 520 × 520 Ejector stroke / force (mm / kN): 150 / 40 Dry cycle time (sec): 1.4 – 320 Screw diameter (mm): 30 Screw stroke (mm): 160 Shot volume (cm³): 113 Screw speed (rpm): 420 L/D ratio (3 zones): 23.6 / 20.0 Gusdpfxeyyz Ddo Agfea Plasticizing capacity (g/sec): 15 / 22 L/D ratio (barrel): -29 Plasticizing capacity (barrel) (g/sec): -29 Injection flow (cm³/sec): 157 / 214 Injection pressure (bar): 2400 / 2000 Nozzle stroke / force (mm / kN): 225 / 28 Drive / Power Pump motor power (kW): 16.91 Working hours 13.227 h Type: Multicomponent Drive: Electric

Condition: excellent (used), Year of construction: 2016, Machine designation: VC 330H/200V/80 Combi Clamping unit: Clamping force: 80 tons Opening stroke: 458 mm Ejector stroke: 100 mm Ejector force: 39.8 kN Injection unit 1: Screw diameter: 25 / 30 / 35 / 40 mm Max. swept volume: 79 / / 154 / 201 cm³ Screw speed max: 400 / 425 / 400 / 320 rpm Screw speed max current: 425 rpm Injection rate: 67 / 97 / 132 / 172 cm³/s Injection rate increased: 50 / 71 / 97 / 127 cm³/s Specific injection pressure: 2401 / 2181 / 1595 / 1225 bar Specific injection pressure increased: bar Nozzle stroke: 500 mm Nozzle contact pressure: 48.9 kN Injection unit 2: Screw diameter: 15 / 18 / 22 / 25 mm Max. swept volume: 18 / 25 / 99 / 49 cm³ Screw speed max: 480 / 480 / 480 / 480 rpm Screw speed max current: 480 rpm Injection rate: 37 / 54 / 149 / 104 cm³/s Injection rate increased: 28 / 40 / 98 / 77 cm³/s Specific injection pressure: 2200 / 2200 / 1451 / 1230 bar Guedsyyzzvjpfx Agfoa Specific injection pressure increased: bar Nozzle stroke: 380 mm Nozzle contact pressure: 40.7 kN Type: Multicomponent Drive: Hydraulic

Condition: good (used), Year of construction: 2004, Demag ergotech extra 500-200 (2004) Gedpfxeyyzuvo Agfjua

Condition: good (used), Year of construction: 2004, Demag ergotech sys 50-200 (1992) Gsdpoyyztfjfx Agfeua

Condition: used, Year of construction: 2001, Demag ergotech concept 800/420-310 (2001) Godpfx Agsyyzqwefeua

Condition: good (used), Year of construction: 2006, Demag systec 160/520-430 (2010) Guedpfx Ajyyzpyogfja

Condition: good (used), Year of construction: 2003, Demag ergotech extra 800-430 (2003) Guodpfx Agjyyzi Hjfea

Condition: ready for operation (used), Year of construction: 2008, operating hours: 57,628 h, clamping force: 800 kN, screw diameter: 35 mm, injection weight: 149 g, This DEMAG SYSTEC 80/420-310 was manufactured in 2008. It features a clamping force of 800 kN and a screw diameter of 35 mm, making it suitable for processing various materials such as PA, PP, PE, and ABS. The machine includes a Wittmann linear robot and a Gravimax 14R gravimetric blender. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG SYSTEC 80/420-310 hydraulic injection moulding machine we have for sale. Contact us for further details. • Processed materials: PA, PP, PE, ABS • Cylinder temperature: up to 450°C • Tie bar distance: 420 mm • Injection unit: 310 • Control system: CDIAS / NC5 • Total operating hours (SPS): 108,544.0 h • Drive operating hours: 57,628.7 h • Heating operating hours: 73,426.7 h • Total cycle counter: 5,058,031 • Voltage: 400 V • Frequency: 50 Hz • Current: 114 A • Max pressure (Pmax): 235 bar • Max flow (Qmax): 104 l/min • Installation height of the tool: 300 mm • Maximum distance between tool mounting plates: 750 mm Gusdoyyyuuspfx Agfea • Availability: Mid 2026 Additional equipment • Wittmann linear robot (Handling/Robot) • Gravimax 14R gravimetric blender • TORO-systems material loader