CEE Machines s.r.o.

Condition: good (used), Year of construction: 2016, DMG Ecoturn 310 Hjdey Ic A Rspfx Ak Dol Year of manufacture: 2016

Condition: new, Year of construction: 2018, functionality: fully functional, Standard technical data: Swing diameter over bed: 580 mm Swing diameter over carriage: 470 mm Maximum machinable diameter: 360 mm Max. workpiece length: 250 mm Traverse (X): 260 mm Traverse (Z): 350 mm Traverse (Y): 100 mm (+/- 50) C axis: 360 degrees (0.001-degree increments) Spindle speed: 50-6,000 rpm Spindle nose: JIS A2-6 Spindle bore diameter: Ø62 mm Front spindle bearing diameter: Ø100 mm Turret type: M-V12 Number of tools: 12 Tool size: 20x20 mm Tool shank diameter: Ø32 mm Tool change time: 0.1 sec Driven tool speed: 45-6,000 rpm Rapid traverse (X): 25 m/min Rapid traverse (Z): 30 m/min Rapid traverse (Y): 12.5 m/min Main motor power (15 min/continuous): 11/7.5 kW (PREX) Driven tool motor power: 5.5/3.7 kW (PREX) Machine dimensions (L x W x H): 2,020 x 1,734 x 2,250 mm Machine weight: 4,050 kg Control: OSP P300L Standard specification: 1 OKUMA CNC Lathe Model LB2000 EXII MYC with OSP-P300L CNC Controller, including CE mark & EMC 1 set European Standard Specification 1-1. V12 radial turret head, 1 set 1-2. Spindle, 1 set (1) Spindle speed: 50-6,000 rpm (1 set) (2) Spindle motor PREX 11/7.5 kW (1 set) (3) Spindle: JIS A2-6; bore Ø62 mm (1 set) (4) C-axis control, 360 degrees (0.001-degree increments) (1 set) (5) SR1146 hydraulic cylinder for chuck (1 set) 1-3. MT4 tailstock 1-4. Dual-action foot pedal for chuck and tailstock side, 2 sets 1-5. Driven tool motor PREX 5.5/3.5 kW (2 min continuous) 1 set 1-6. Driven tool speed: 45 - 6,000 rpm, 1 set 1-7. Work area lighting, 1 set 1-8. Full enclosure, 1 set 1-9. Chip tray, 1 set 1-10. Door interlock, 1 set 1-11. Lubrication monitoring, 1 set 1-12. Automatic chuck open/close on main spindle, 1 set 1-13. Chip air blow, 1 set 1-14. Foundation bolts, 1 set 1-15. Tool setter, 1 set 1-16. CE marking, 1 set 1-17. IEC standard compliance, 1 set 1-18. Transformer, 1 set 1-19. Coolant system with 250W pump, 1 set 1-20. OSP-P300L CNC control with 15" color touchscreen monitor, 1 set 1-21. OSP-P300L Advanced One Touch IGF-M-E kit specification (1 set) * Multitasking machines coordinate conversion (1 set) * Multitasking machines profile generation (1 set) * Advanced One Touch IGF (graphical programming assistant with dialogue-based interface) (1 set) * Real 3D simulation (1 set) * Cycle time monitoring (1 set) * Load monitor (1 set) * NC operation monitor (1 set) * Cycle time reduction function (1 set) * Hi-Cut Pro (machining-specific servo optimization) (1 set) * Variable spindle speed control (1 set) 1-22. 2-stage position indicator lamp, 1 set 1-23. Program storage: 2GB, 1 set 1-24. Operation memory: 2MB, 1 set 1-25. Spindle orientation, electric, 1 set 1-26. Inch/metric conversion, 1 set 1-27. Ball screw pitch error compensation on X/Z axes, 1 set 1-28. Workpiece ejection monitoring, 1 set 1-29. Lifting hooks, 1 set 1-33. TAS-C thermal compensation on the frame Hedpfx Akjy H H Afo Djl 6” chuck Chip conveyor

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, turning diameter over cross slide: 300 mm, turning length: 285 mm, spindle bore: 51 mm, overall weight: 3,200 kg, The machine is in good technical condition, connected and available for testing. Hjdpfx Aksy Hz Trj Dol

Condition: good (used), Year of construction: 1992, functionality: unexamined, turning length: 500 mm, turning diameter: 300 mm, For sale: 1 used CNC lathe Manufacturer: Yamazaki Mazak Corp. Hjdpfx Akey Huvys Del Model: Quickturn 10N-U Year of manufacture: 5/1992 Specifications: Spindle speed: 36 – 3,600 rpm Octagonal turret Fully automatic tailstock Max. workpiece length: 507 mm Turning diameter: 300 mm The machine can be viewed at our warehouse in 09599 Freiberg.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Offered here is a lathe from the manufacturer Mori Seiki, featuring twin turrets, a C-axis, and driven tools. The machine is in very good condition and can be inspected and tested at our facility. The scope of delivery includes 4 driven tool holders. Manufacturer: Mori Seiki Model: NZL 2000/600MC Year of manufacture: 2010 Control: MSX-853IV Technical data: Travel X1, Z1: 225 x 650 mm Travel X2, Z2: 170 x 650 mm Rapid traverse X1, Z1, Z2: 30,000 mm/min Rapid traverse X2: 25,000 mm/min Power chuck: Kitagawa N-08 JAPAN Chuck size: 200 mm Main spindle power: 15/22 kW Max. spindle speed: 5,000 rpm Driven tool spindle power: 3.7/5.5 kW Max. driven tool speed: 10,000 rpm Number of tools, upper turret: 12 (all driven) Number of tools, lower turret: 8 Rated power: 51 kVA Chip conveyor tank capacity: 400 l Total weight: 7,000 kg Hjdpfx Akoy Hhvte Dsl

Condition: used, Year of construction: 2017, turning diameter 340 mm turning length 1000 mm control Mazatrol SmoothC Hsdpfsy E Txdex Ak Djl

Condition: ready for operation (used), Year of construction: 2013, Available immediately from university: L & Z Eagle Lathe Type LC 340 Year of manufacture: 2013 Hjdpfx Akoy E I U Hj Dsl Center height: 170 mm Swing over bed: 340 mm Swing over cross slide: 205 mm Turning length: 1000 mm Spindle bore: 38 mm Drive: 1.5 kW Spindle speeds: 60 – 2000 rpm Tailstock quill: 40 mm Chuck: 160 mm Faceplate: 200 mm Four-way tool post Weight: 2 t Price: EUR 2,000 – plus VAT, ex location

Condition: excellent (used), Year of construction: 1997, Control Fanuc Series 20-T Turning diameter 330 mm Bar diameter 42 mm Hjdey Ehi Rspfx Ak Djl Turning length 650 mm Speed 5,000 min-1 8-position turret Minimum quantity lubrication

Condition: used, 4 Axis Year Of Manufacture: 1998 8” Chuck 2 Turrets – Turret 1 – 12 Stations Turret 2 – 8 Stations Hsdjy Drunopfx Ak Dsl Programable Tailstock 750mm Between Centres Live Tooling C Axis Touch setter Y axis Swarf Conveyor Okuma OSP 7000L Control

Condition: good (used), Year of construction: 2005, functionality: fully functional, turning length: 500 mm, turning diameter: 320 mm, Fanuc Oi-TD cnc control collet chuck device 10-fold revolver tail stock chip conveyor Technische Daten: / technical details max. Drehdurchmesser / max. turning diameter 320 mm max. Drehlänge / max. turning length 500 mm X-Weg / X-travel 180 mm Z-Weg / Z-travel 520 mm Hedpfxey Dqvws Ak Djl max. Drehzahl / max. spindle speed 6000 UpM /rpm Anzahl der Revolverplätze / number of tool places 10 Gewicht ca. / weight ca. 3200 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 1998, functionality: fully functional, turning diameter over cross slide: 550 mm, turning length: 1,000 mm, turning diameter: 400 mm, spindle bore: 76 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 10 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 950 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, Equipment: documentation/manual, CNC LATHE GRAZIANO MT 500 C – Fully Operational – Turin (TO) Graziano MT 500 C slant bed CNC lathe, in good condition and fully operational. Spindle bearing overhaul already completed. Available for inspection and testing by appointment in Turin. Main technical data: - Max diameter over bed: 550 mm - Max turning diameter: 400 mm - Distance between centers: 1,000 mm - Spindle power: 34 kW - Spindle speed: 20 – 4,000 rpm - Bar capacity: Ø 74 mm - VDI 40 turret – 12 positions Hodey A Ttiepfx Ak Del - CNC control: FAGOR (ISO + conversational) - 2 controlled axes: X – Z - Automatic tailstock with carriage coupling - Included: chip conveyor (belt type) - Included: hydraulic chuck Ø 250 mm (3-jaw, ASA 8") - Included: tool presetting arm - Original CE documentation included - CE conformity | Weight: 6,550 kg Accessories included in the sale: automatic tailstock, chip conveyor, hydraulic chuck Ø 250 mm, presetting arm, original manuals. The machine is available for viewing and testing in Turin by appointment.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, * Okuma LB 3000 MY. * Included equipment valued at €20,000–24,000. * 4-axis machine. * Fully independent programmable tailstock with movement on the Z axis and clamping by M codes. * 12-station turret, all positions powered. * C axis. * Y axis. * Integrated main spindle motor: 18.5 / 22 kW. * Driven tool motor: 5.5 kW. * Motor starting torque: 620 Nm. * Integrated, beltless main spindle drive. * Main spindle nose size: A2-8. * Tailstock Morse taper: MT5. * Bar capacity: 75 mm. * Spindle chuck: Kitagawa B-210. * Box guideways on all axes. * Main spindle speed: 4,200 rpm. * Driven tool speed: 4,000 rpm. * Maximum swing diameter: 520 mm. * Maximum machining diameter: 380 mm. * Maximum machining length: 1,050 mm. * Headstock oil chiller. * IGF OSP P200-L conversational automatic programming system. * Automatic load monitoring and tool consumption display. * Parametric automatic anti-collision system for tools. * Tool life management and monitoring system. * Rapid traverse speed: 20 and 25 m/min in X and Z axes. * Turret indexing time: 0.2 seconds. * Renishaw automatic tool setting arm. * Communication ports: USB, PCMCIA card, and RS-232. * Dual pedal for main chuck and tailstock open/close. * Side-mounted chip conveyor, hinge-type. * Complete set of external and internal static toolholders. * Full set of axial and radial driven toolholders. Hedpfx Akoy A D Rle Del * Electrical transformer. * Documentation: parts list, electrical diagrams, programming, and operating manuals. * Weight: 6,200 kg. * Machine currently in operation. * Immediate availability unless already sold.

Condition: as good as new (ex-display), Year of construction: 2022, CNC lathe Doosan Puma GT2100M, year 2022/10. Condition: new machine, showroom unit. Equipped with a Cromar chip conveyor. Hedpfxjy Azras Ak Djl

Condition: good (used), Year of construction: 2021, operating hours: 9,500 h, functionality: fully functional, turning diameter: 280 mm, spindle bore: 52 mm, travel distance X-axis: 200 mm, travel distance Z-axis: 515 mm, spindle motor power: 23,500 W, rotational speed (max.): 5,000 rpm, quill travel distance: 500 mm, quill diameter: 60 mm, quill stroke: 125 mm, type of input current: three-phase, torque: 150 Nm, bar passage: 66 mm, bar diameter (max.): 52 mm, Equipment: rotational speed infinitely variable, Spinner TC400 52MC Hjdpfx Asyz Sy Eok Dsl - with driven tool stations in all tool pockets (12) - Servo VDI30 turret with axial arrangement - Siemens 840DE control / Spinner Spios 24" touch operating panel - Multi-function handheld control unit - Chip conveyor - 4-axis machining with rotary axis - Probe for tool measurement - Parts catcher with swivelling arm and collection chute

Condition: used, Year of construction: 2014, operating hours: 21,950 h, functionality: fully functional, turning length: 669 mm, turning diameter: 330 mm, spindle bore: 88 mm, spindle speed (max.): 3,400 rpm, overall weight: 5,700 kg, bar passage: 75 mm, chuck outer diameter: 250 mm, Equipment: rotational speed infinitely variable, - Siemens 828 - Main spindle 3,400 rpm - Siemens motor - 12-position Sauter turret for 12 driven tools - Tool holder VDI 40 - 3-jaw chuck Ø 250 mm - C-axis - Chip conveyor - Coolant system and through-spindle coolant (IKZ), 20 bar - Work area lighting - Foot pedal for power chuck Hsdpfx Asyzr Trsk Djl - CE certification

Condition: used, functionality: fully functional, The machine has not been in operation for about one year. It is not connected to the power supply. The machine is available for inspection upon request. – CNC control: OSP 5000L-G CNC system (German language) – Data transmission: RS232 – Tool turret: 12-position BOLT ON type – Chuck: 250 mm – Spindle: 70-3800 rpm (11 kW, 30 min; 7.5 kW – continuous operation) – Non-through spindle – Spindle bore diameter: 75 mm (at a depth of 70 mm, measured from the face of the chuck and without jaws) – Spindle bore diameter: 28 mm (at a depth of 200 mm, measured from the face of the chuck and without jaws) – X axis travel: 400 x 0.001 mm – Z axis travel: 500 x 0.001 mm – XZ cutting speed: 0.01-1000 mm/rev – XZ feed rate: 12,000 mm/min – Power supply: 3 x 400V – Machine rated power: 21 kVA – Maximum load current: 36A Hedpoyy Upasfx Ak Dol – Machine dimensions (width x depth x height): 2.9 m (3.9 m with chip conveyor) x 1.8 m x 1.72 m – Machine weight: 4500 kg

Condition: good (used), Year of construction: 2007, functionality: fully functional, CNC lathe Okuma LU 300 M 2SC1000 Control: OSP-P200L Year of manufacture: 2007 Internal machine no.: 26 Turning length: 1,000 mm Turning diameter: 340 mm Swing diameter over bed: 530 mm Swing diameter over carriage: 410 mm Spindle bore: 72 mm Spindle speed: 45 – 5,000 rpm 2 tool turrets A turret: 12 tool positions (live tooling) Hsdpfxoyyk I Ej Ak Dol B turret: 8 tool positions Equipment: Tailstock Transformer Touch setter Chip conveyor OneTouch IGF

Condition: good (used), Year of construction: 2004, functionality: fully functional, turning length: 800 mm, turning diameter: 350 mm, CNC Lathe TAKISAWA TMM 250 – Twin-Spindle, Y-Axis, Live Tooling Manufacturer: TAKISAWA Model: TMM 250 Control: Fanuc 180is-TB Year of manufacture: 2004 5. MACHINE SPECIFICATIONS Capacities Workpiece turning diameter: 780 mm Standard turning diameter: 220 mm Max. turning diameter: 350 mm Max. turning length: 800 / 200 mm (flange) Distance between spindle ends: 1130 mm Bar work capacity: 76.2 / 50.8 mm (left/right spindle) Travel X-axis travel (upper turret): 265 mm Y-axis travel (upper turret): ±50 mm Z-axis travel (upper turret): 760 mm A-axis travel (right spindle side): 800 mm X-axis travel (lower turret): 228 mm Z-axis travel (lower turret): 760 mm Spindles Number of spindles: 2 Spindle speed: 4,000 rpm (left, right) Number of gear stages: 1 Min. spindle index angle: 0.001° (Cs-axis) Spindle nose size: JIS A₂-8 / A₂-6 (left/right spindle) Taper bore (type, no.): 90 × 1/20 taper // 75 × 1/20 taper (left/right spindle) Spindle bearing inner diameter: 120 / 100 mm (left/right spindle) Spindle bore diameter: 86 / 63 mm (left/right spindle) Machine Description High-performance CNC lathe with twin spindles and two turrets. The machine enables simultaneous machining with both turrets on one spindle (4-axis machining), making it ideal for complex turning/milling operations. Highlights - 2 spindles with C-axis - 2 turrets (VDI 40) - Y-axis on upper turret (±50 mm) - Live tooling - FANUC CNC control (32 bit) - Touchscreen operation - Double holders possible (up to 60 tool positions) Technical Data Left spindle: Power: 15 / 22 kW Torque: max. 433 Nm Speed: up to 4,000 rpm Spindle bore: 86 mm Bar capacity: 76 mm Right spindle: Power: 11 / 18.5 kW Torque: max. 326 Nm Speed: up to 4,000 rpm Spindle bore: 63 mm Bar capacity: 51 mm Tooling: 2 turrets with 15 positions each Max. 15 live tools per turret Tool drive power: 3.7 / 5.5 kW Tool speed: up to 4,000 rpm Equipment - FANUC AC servo drives - 10.4" colour LCD with touchscreen - Rigid tapping - Automatic central lubrication - Coolant pressure: 4 bar (optional 6 bar high-pressure pumps) - Fully enclosed machine housing with work area lighting - CE compliant Additional Equipment Chucks: Left: Schunk HSL 315 Right: SMW BBM 250 Automatic work area door (pneumatic) Chip conveyor (hinged belt, right) High-pressure coolant pumps (6 bar each turret) Manual tool setter 3-colour signal lamp Machining Data Turning length: 760 / 200 mm Tool torque: max. 35 Nm Hodpfx Asyx S Iqek Djl Condition Used, fully functional – well-maintained industrial machine.

Condition: excellent (used), OKUMA control system Turning diameter: 650 mm Turning length: 1,450 mm Hsdpfxsyxrggs Ak Dsl Technical information see photo

Condition: used, Year of construction: 2018, turning length: 735 mm, turning diameter: 315 mm, travel distance X-axis: 267 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 840 mm, Takisawa Japan TS-4000YS General Data Brand: Takisawa Japan Model: TS-4000YS Hedpfx Asyxqqqek Djl Category: CNC Lathe Year: 2018 CNC Control: FANUC Series 32i-TB Capacity Max turning diameter: Ø 600 mm Max machining diameter: Ø 315 mm Max machining length: 735 mm Bar capacity: No. 1: Ø 81 mm | No. 2: Ø 40 mm Axis Travel X-axis: 267 mm Y-axis: -50 / +70 mm (120 mm) Z-axis: 840 mm A-axis (sub-spindle): 780 mm Main Spindle Spindle speed: 4,200 rpm Spindle/sub-spindle nose: ASA-8 Chuck diameter: 254 mm C-axis accuracy: 0.001° Spindle motor power (cont/30 min): 22 kW Sub-Spindle Spindle speed: 6,000 rpm Spindle nose: FLAT-140 Chuck diameter: Ø 210 mm B-axis accuracy: 0.001° Sub-spindle motor power (cont/30 min): 11 kW Turret Static/motorized turret stations: 15 stations (motorized) Driven tool speed: 6,000 rpm Driven tool motor power (cont/30 min): 7.5 kW Turning/boring tool size: 25x25 mm / Ø 40 mm Feed Rates Rapid traverse X / Z / A axes: 30,000 mm/min Rapid traverse Y axis: 10,000 mm/min Accessories - Right side chip conveyor - Spindle line transformer + air conditioner - 4 driven tool holders (2 radial + 2 axial) + various static holders - Renishaw tool presetter on main spindle - Removable Renishaw presetter on sub-spindle - Parts ejector arm on main spindle - Manuals, electrical diagrams, and CE declaration

Condition: used, NAKAMURA-TOME WT-150 is a high-precision CNC turning lathe designed for accuracy and reliability. Capacities: swing over cross-slide 310 mm, spindle bore 51 mm, turning length 255/755 mm; X 207.5 mm; Z 300 mm; Y 2×±30 mm. Specs: 2 spindles, 2 turrets with 12 positions and driven tools, spindle speeds 60–6000 rpm, spindle power 7.5/5.5 kW, driven tools 3.2/2.7 kW, rapid traverse X=12/Z=40 m/min, 3×400 V 50 Hz, weight ≈8500 kg, dims 3850×2330×2320 mm. Accessories: lamp, high‑pressure coolant, parts catcher, chip conveyor, foot pedal, set of toolholders/steel supports. Achieves tight tolerances; suited to automotive, aerospace, medical and tooling. Hodsyxn Nwspfx Ak Djl

Condition: used, NZX 1500/800SY is a CNC Turning-Milling-Drilling Center with high precision, accuracy and reliability. Capacities: 2 turning spindles, 2 revolvers, swing diameter over bed 800 mm, max. turning Ø 320 mm, max. bar Ø 52 mm; travels Z 810 mm, X 210 mm, Y 110 mm (both carriages). Specs: spindle speeds 0–6000 t/min, spindle power 22/18.5 kW, driven tools power 7.5/5.5 kW, spindle nose JIS A2-5, spindle hole 61 mm; rapid traverse X 30 m/min, Z 50 m/min, Y 20 m/min; weight ~8100 kg; overall dims L4396×W2835×H2320 mm. Accessories: direct measuring system X axis, lamp, coolant system, coolant through counter spindle, loader interface, parts catcher, workpiece conveyor, chip conveyor. Delivers tight tolerances; typical applications: automotive, aerospace, medical, watchmaking and machine tools. Hodpfjyxn I Hex Ak Djl

Condition: used, GILDEMEISTER NEF 320 is a CNC turning lathe engineered for precision machining, high accuracy and operational reliability. Working capacities: max. turning diameter 320 mm, max. turning length 740 mm, centre height 160 mm, distance between centres 750 mm, spindle hole 52 mm; travels Z 700 mm, X 185 mm. Main specs: spindle power 11 kW, max. torque 410 Nm, speeds stepless 4–4000 t/min, spindle taper MT 6; tailstock Morse taper 5, spindle stroke 120 mm, spindle diameter 70 mm; rapid traverse X 8 m/min, Z 10 m/min; weight ~2000 kg, dimensions 2450×1668×1825 mm. Enables tight tolerances; typical applications include automotive, watchmaking, toolmaking, aerospace and medical sectors. Hsdpfxoyxnuge Ak Del

Condition: ready for operation (used), Year of construction: 2013, operating hours: 7,546 h, functionality: fully functional, turning length: 284 mm, turning diameter: 300 mm, spindle bore: 62 mm, spindle speed (max.): 4,500 rpm, controller model: Fanuc Oi-TD, TECHNICAL DETAILS Max. turning diameter: 300 mm Max. turning length: 284 mm Swing diameter over bed: 550 mm Chuck diameter: 210 mm Bar capacity: 51 mm Spindle nose: A2-6 Main spindle max. speed: 4,500 rpm Spindle bore: 62 mm Spindle bearing diameter: 100 mm Main spindle drive power: 11 / 7.5 kW Hjdpfx Ajyxmmuok Del Travel - X axis: 170 mm Travel - Z axis: 335 mm Number of tool stations: 12 positions Tool size: Ø25 x Ø40 mm Rapid traverse (X / Z): 36 / 36 m/min Quill diameter: 60 mm Quill stroke: 80 mm Tailstock taper: MT 4 MACHINE DETAILS Control: Fanuc Oi-TD Total power requirement: 25 kVA Dimensions & weight Installation space approx.: 8.5 x 2.5 x 2.0 m Machine weight approx.: 3.2 t Operating hours Control on-time: approx. 26,932 h Cutting hours: approx. 7,546 h EQUIPMENT Documentation Chip conveyor Coolant unit Tailstock Parts catcher Signal lamp Hydraulic unit Three-jaw chuck SEOAM CAH-08 Collet chuck HAINBUCH nova size 65 Tool setting device Interface for bar feeder Bar loading magazine Breuning SIMAG 70.1-3000 Various tool holders

Condition: not inspected (used), functionality: unexamined, turning diameter over cross slide: 160 mm, turning length: 1,000 mm, turning diameter: 315 mm, spindle speed (max.): 3,300 rpm, bar passage: 52 mm, No reserve price – guaranteed sale to the highest bidder!\n\nTECHNICAL DETAILS\n\nTurning diameter: 315 mm\nTurning diameter over cross slide: 160 mm\n\nTurning length: 1,000 mm\n\nSpindle speed range: 30 – 3,300 rpm\n\nSpindle bore: 52 mm\n\nNumber of tool changer positions: 12\n\nMACHINE DETAILS\n\nControl model: Siemens Sinumerik 802 D\n\nMachine weight: approx. 6 t\n\nNote: The machine has been overhauled! Hsdpfx Akoyv Auco Djl