Used Haas Cnc for sale (251)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 1148877, Specification Table size 1016mm x 356mm X axis traverse 508mm Y axis traverse 406mm Z axis traverse 356mm Spindle BT40 Rjdpfx Ahsx Afpgjzsbt Spindle speeds 0-10,000rpm Spindle motor 11.2kW Rapid feed rate 30.5m/min Toolchanger capacity 20 Tools Approximate weight 2313Kg   Machine Equipped with Haas CNC Control HRT 160 4th axis 11 off BT40 toolholders High flow coolant system Lighting Enclosed guarding Manual

Condition: excellent (used), Year of construction: 2019, operating hours: 3,140 h, functionality: fully functional, machine/vehicle number: 1162456, Specification Table size 1016mm x 356mm X axis traverse 508mm Y axis traverse 406mm Z axis traverse 356mm Spindle BT40 Spindle speeds 0-15,000rpm Spindle motor 11.2kW Rapid feed rate 30.5m/min Toolchanger capacity 20 Tools Approximate weight 2313Kg Rjdpfsycf S Ajx Ahzobt   MACHINE EQUIPPED WITH:- Haas CNC control Swarf auger Wireless intuitive probing system 12 off BT40 toolholders High speed machining User definable macros Visual part programming system 4th and 5th axis interface (interface only, no 4th or 5th axis) High flow coolant system Lighting Enclosed guarding Manual Power on hours 3140 Cycle start hours 1519 Feed cutting hours 1149

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 3096524, MACHINE SPECIFICATION Swing over front apron 641mm Swing over cross slide 413mm Maximum cutting diameter 356mm Maximum cutting length 356mm Spindle nose A2-5 Spindle bore 58.7mm Bar capacity 44mm Maximum spindle speed 6000rpm Spindle motor power 11.2kW Number of turret tool stations 12 Rapid traverse Z/X axis 30.5m/min Approximate weight 2500Kg MACHINE EQUIPPED WITH Haas CNC control system 3 jaw chuck 165mm diameter Collet chuck Rjdpfx Ahsx R Sb Iszebt Parts catcher Hydraulic tailstock Tool presetter Assorted tool holders Interlocked guarding Automatic lubrication system Coolant system

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 3108833, MACHINE SPECIFICATION Swing over front apron 641mm Swing over cross slide 413mm Maximum cutting diameter 356mm Maximum cutting length 356mm Spindle nose A2-5 Spindle bore 58.7mm Bar capacity 44mm Maximum spindle speed 6000rpm Spindle motor power 11.2kW Number of turret tool stations 12 Rapid traverse Z/X axis 30.5m/min Approximate weight 2500Kg Rbedpjx Ig Auefx Ahzst MACHINE EQUIPPED WITH Haas CNC control system 3 jaw chuck 165mm diameter Collet chuck Hydrafeed MSV 65 magazine barfeed Parts catcher Hydraulic tailstock Swarf conveyor Assorted tool holders Interlocked guarding Automatic lubrication system Coolant system

Condition: ready for operation (used), controller model: Haas, empty load weight: 12,000 kg, total length: 5,950 mm, total width: 3,048 mm, total height: 2,200 mm, swing diameter over cross slide: 2,000 mm, Grote doorlaat toolroom draaibank Draaibank met dubbele klauwplaat Rbedpfswu Ipijx Ahzjt Spanenafvoerband CNC Hollow Spindle Slant Bed Oil Country Lathe Swing over bed: 1350 mm Swing over cross-slide: 400 mm Dia of spindle bore: 270 mm!! Power on the spindle: 55 HP Number of speeds: 1 > 500 rpm

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 26956, Specification Table size 914mm x 305mm X axis traverse 406mm Y axis traverse 305mm Z axis traverse 254mm Spindle BT 40 Rbjdpfswkrq Asx Ahzot Spindle speeds 0-6000rpm Spindle motor 5.6kW Rapid feed rate 15.2m/min Toolchanger capacity 10 tools Approximate weight 1542kg   Machine equipped with:- Haas CNC Control System Coolant system Lighting Enclosed guarding Manual

Condition: excellent (used), Year of construction: 2019, operating hours: 5,277 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, workpiece weight (max.): 300 kg, table width: 500 mm, table length: 630 mm, overall weight: 8,500 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 22,400 W, spindle nose: CT 40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, CNC Machining Centre HAAS UMC 750 SS TECHNICAL CHARACTERISTICS: Year of manufacturing: 2019 Number of simultaneous axes: 5 Stroke X axis: 762 [mm] Stroke Y axis: 508 [mm] Stroke Z axis: 508 [mm] Angular C axis stroke: 360 [°] Table dimensions : Ø630 x 500 [mm] Max. load on table: 300 [Kg] B axis swivelling stroke: +110 [°] / 350 [°] Spindle type: CT 40 Max. spindle speed: 15000 [rpm] Spindle power: 22.4 [kW] Tool changer magazin number of stations: 40 Lubrication tank capacity: 284 [l] Number of running hours: 5277 [h] Weight: 8500 [Kg] EQUIPMENT INCLUDED: x1 spindle 15000 [rpm] x1 through-spindle coolant x1 high-pressure coolant pump 21 bar x1 auxiliary coolant filter x1 RENISHAW wireless workpiece probe x1 calibration sphere x1 RENISHAW tool probe x1 HAAS oil mist extractor x1 HAAS remote handwheel x1 HENNIG chip conveyor, type 101435 Redpfx Ajx Nf Tbjhzsbt Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. machine similar to Mikron, Hermle, DMG Mori, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, Alzmetall, as well as milling, drilling and tapping machines, and CNC grinding machines

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 70161, TECHNICAL DETAILS turning diameter: 760 mm turning length: 864 mm turning diameter over bed slide: 450 mm longitudinal travel: 864 mm cross slide travel: 287 mm spindle speed (infinitely variable): 0 - 3,400 rpm Rodpfx Aheizwwmjzjbt spindle bore: 105 mm MACHINE DETAILS operating voltage: 400 V Connected load: 28 kVA Space requirement approx. 3.2 x 2 x 2 m EQUIPMENT - 12-fold turret - power chuck - large spindle bore - tool presetting

Condition: used, Year of construction: 2018, x-travel 1.270 mm y-travel 508 mm z-travel 635 mm distance spindlenose to table 107 - 742 mm spindle tunring speed 12.000 U/min spindle drive 22,4 kW max. torque 122 Nm table dimensions 1.321 mm rapid traverse ( x / y / z ) 495 m/min In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical specifications & accessories: Rbsdpeyf N Hpefx Ahzst - Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: excellent (used), Year of construction: 2015, Machine type: 5-Axis Machining Centre (Simultaneous) Year of manufacture: 2015 Control: HAAS CNC control to DIN 66025 X-axis travel: 762 mm Y-axis travel: 508 mm Z-axis travel: 508 mm Max. spindle speed: 15,000 rpm Spindle motor power: 22.4 kW (vector drive) Spindle taper: SK 40 (DIN 69871) Max. torque: 122 Nm (at 2,000 rpm) Table dimensions: ∅ 630 x 500 mm Max. workpiece weight: 300 kg Number of simultaneously controlled axes: 5 C-axis rotation range: 360° continuous B-axis swivel range: -35° / +110° Rapid traverse rates (X, Y, Z): 30.5 m/min Tool magazine (positions): 40+1 (side-mounted) Coolant system capacity: 284 litres Machine weight: approx. 8.2 t Cooling systems: - Through-Spindle Coolant (TSC), 21 bar - Programmable coolant nozzle (P-COOL) - Additional coolant filtration system (25 μm) - Hand rinsing gun with coolant Measuring and probing systems: - RENISHAW probing system (WIPS-R) - Work probe - Tool measurement system Chip management: - Hinged belt chip conveyor Software & Control: - High-Speed Machining (HSM) - Ethernet interface Redpfxjyf H Evs Ahzjbt - Macros - Coordinate rotation and scaling

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 1111074, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, table length: 1,575 mm, spindle speed (max.): 7,500 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 1,524 mm Travel Y-axis: 660 mm Travel Z-axis: 635 mm Table size: 1,575 x 584 mm Spindle speed: 7,500 rpm Spindle taper: CAT40 MACHINE DETAILS Control: Haas Redpfx Aoyf E D Rehzsbt Motor power: 30 HP EQUIPMENT 20-position tool changer (ATC)

Condition: excellent (used), Year of construction: 2005, Travels X-travel 559 mm Y-travel 635 mm Z-travel 559 mm Spindle Max. rated power 22.4 kW Max. speed 8100 rpm Max. torque 122.0 Nm 2000 rpm Drive system: Inline direct drive Taper: CT40 / BT 40 / HSK-A63 Bearing lubrication: Air/Oil Injection Cooling: Air-cooled Integrated 4th axis (B-axis) 90° rotation time (full 4th) 3.0 s Max. load capacity on clamping surface 400 kg Rotational torque (continuous) 575 Nm Backlash 30 arc-sec Gear ratio 106:1 Braking torque 3390 Nm Minimum resolution 0.001° Switching accuracy ± 15 arc-sec Repeatability 10 arc-sec Rapid traverse speed at B 150° sec Feed rate Max. feed for machining 21.2 m/min. Rapid traverse speed at X 35.6 m/min. Rapid traverse speed at Y 35.6 m/min. Rapid traverse speed at Z 35.6 m/min. Axis Drives Max. X Thrust 15035 N Max. Y Thrust 12500 N Max. Z Thrust 15035 N Tool Holder SK 40 Coolant Tank Capacity 360 L Tool Changer Capacity 30+1 Tools Max. Tool Diameter 64 mm Max. Tool Length 305 mm Max. Tool Weight: 5.4 kg Tool-to-Tool Change Time: 2.8 s Chip-to-Chip Change Time: 3.6 s Air Requirements Required Air Flow† 255 L/min. 6.9 bar Air Hose (inline) 1/2 in. Air Coupling 1/2 in. Minimum Air Pressure 6.9 bar Electrical Specifications Spindle Speed 8100 rpm Inline Direct-Drive Drive System Spindle Power 22.4 kW AC Input Voltage (Three-Phase) – Low 220 VAC Rbsdowmmz Ujpfx Ahzjt Full Load Current (Three-Phase) – Low 70 A AC Input Voltage (Three-Phase) – High* 440 VAC Full Load Current (Three-Phase) – High* 35 A * The "High" specifications refer to machines designed for higher input voltages. Dimensions Length x Width x Height 4800 x 2540 x 2840 mm Weight 7947 kg

Condition: good (used), Year of construction: 2017, functionality: fully functional, Haas control, 24-station tool changer, spindle taper DIN69871-SK40, Renishaw zero-point probe, tool measuring probe, immediately available. Rbodpoyftx Aofx Ahzst

Condition: excellent (used), Year of construction: 2017, operating hours: 3,200 h, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, Top CNC Machining Center HAAS VF-2 – 5-Axis – with Loading Robot – Year 2017 For sale: CNC machining center HAAS VF-2 - Excellent condition - 5-axis configuration - Includes automatic loading robot - 3200 operating hours. Highlights: - Haas 2-axis rotary table Rbsdpoyfg Eijfx Ahzot - HANS loading robot - Tool breakage control and tool measurement by Renishaw - Renishaw OMP40 zero-point probe Model: VF-2 5-axis machining Loading robot for automated production Robust and reliable industrial quality User-friendly HAAS control

Condition: ready for operation (used), Year of construction: 2022, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, This 3-axis HAAS VF-2SSYT with Pallet Pool 3+1 was manufactured in 2022. It features a 30 hp, 22.4 kW in-line spindle, capable of 12,000 rpm, and a 50+1 tool changer. It includes a 15" screen and a 3+1 pallet pool with 900x450 mm pallets. If you are looking to get high-quality milling capabilities, consider the HAAS VF-2SSYT machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits Rbodpfxjx Hblue Ahzjt • Tool changer: 50+1 tool changer • Extra coolant: 360 liters • Pallet pool: 3+1 pallet pool with 900x450 pallets • 21 bar trough spindle • 15" screen Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 750 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 500 mm, controller manufacturer: HAAS, table load: 340 kg, spindle speed (max.): 8,000 rpm, number of axes: 4, This 4-axis HAAS MIKRON VCE 750 was manufactured in 1997. It features a table surface of 900x350 mm, a table capacity of 340 kg, and movements of X 750 mm, Y 410 mm, and Z 500 mm. The spindle operates at 8000 rpm with a power of 7.5 kW. Regular maintenance and recent updates ensure reliability. Consider the opportunity to buy this HAAS MIKRON VCE 750 vertical machining centre. Contact us for more information about this machine. • Table surface: 900 x 350 mm Rbodpfx Ajx D Egzjhzst • Condition: regularly maintained; still in operation • 2023 service: new tool change hand gearbox and new tool change magazine Additional equipment • 4th axis

Condition: used, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Haas lathe Type SL-10 With bar feeder Redpeydpw Eefx Ahzobt With tooling

Condition: ready for operation (used), Year of construction: 2008, operating hours: 5,557 h, travel distance X-axis: 706 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, table width: 914 mm, table length: 356 mm, table load: 1,361 kg, spindle speed (max.): 8,100 rpm, number of axes: 3, This HAAS VF-2, manufactured in 2008, offers strong machining capability with 706 mm of X-axis travel, 406 mm on the Y-axis, and 508 mm on the Z-axis. Equipped with a spindle speed of 8100 rpm and a powerful 22.4 kW spindle motor, it is well suited for demanding milling applications. The visual and technical condition of the machine is very good for its age. Contact us for more information. Rbodpox D Hpkofx Ahzjt • Table: 356 x 914 mm • Tool magazine capacity: 20 tools Additional equipment • Chip conveyor • Documentation / operating manual

Condition: ready for operation (used), Year of construction: 2017, operating hours: 5,300 h, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, controller model: NGC, table width: 1,219 mm, table length: 457 mm, table load: 1,588 kg, spindle speed (max.): 8,100 rpm, number of slots in tool magazine: 20, number of axes: 3, This HAAS VF-3 vertical machining center, manufactured in 2017, offers strong milling performance with a large 1219 × 457 mm table and a load capacity of 1588 kg. It is equipped with an 8100 rpm spindle and includes a chip conveyor as well as a through-spindle coolant 21 bar option. The machine is in excellent technical condition. If you are looking for high-quality milling capabilities, consider the HAAS VF-3 we have for sale. Contact us for more information. • Table size: 1219 x 457 mm • Tool magazine capacity: 20 tools • Stepless spindle speed control Additional equipment • AUGER – Screw-type chip conveyor • WIPS-R – Wireless probe system • ACF – Additional 25 μm filtration system • TSC – Through-spindle coolant with high-power pump (21 bar) Rbodpfox D Hpdsx Ahzet • Documentation / operating manual Technical Specification Taper Size ISO 40 Through-spindle Coolant Yes

Condition: used, Year of construction: 2006, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, controller manufacturer: Haas, total height: 2,750 mm, total length: 2,250 mm, total width: 2,360 mm, table width: 914 mm, table length: 356 mm, table load: 680 kg, spindle speed (max.): 12,000 rpm, Equipment: documentation/manual, CNC Vertical Machining Centre CNC Control Haas CNC Table size 914 x 356 mm Table load 680 kg Number of pallets: 1 x Movement X-axis 762 mm Movement Y-axis 406 mm Movement Z-axis 508 mm Redpfxsydn E Io Ahzjbt Spindle taper DIN 68971A Spindle speed 12.000 1/min Spindle motor 22,4kW Magazin capacity 24 + 1 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2006, machine/vehicle number: IntNr231476, Haas Mini Mill NC Control: HAAS CONTROLLER Travel (approx.): X = 406 mm, Y = 305 mm, Z = 254 mm Table size (approx.): 914 x 305 mm Spindle speed: 6,000 rpm / 45 Nm at 1,200 rpm 10-position tool changer, SK40 taper Max. distance between table and spindle nose: 102 – 356 mm 10-tool magazine Tool measuring system Rotary table USB & RS232 interfaces Automatic central lubrication system Program support with G/M codes Tool load monitoring Coolant system Dimensions (L x W x H): 1,880 x 2,007 x 2,692 mm Machine weight: 1,542 kg Rbedpfxjydd E Do Ahzot The machine can be inspected under power by prior appointment. Technical data and information are subject to change and error. Interim sale reserved.

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 13378, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 500 m/min, rapid traverse Y-axis: 400 m/min, rapid traverse Z-axis: 400 m/min, spindle speed (max.): 7,500 rpm, Working machine. Being Used every Day Rodpoxlikaofx Ahzobt

Condition: excellent (used), Manufacturer: Haas Redpfx Ahjxywiyozjbt Model: VM-6HE Serial number (SN): 1067464 Axes: 3-axis CNC machining center Spindle mount: SK40 Axis travels (X/Y/Z): 1,625 × 812 × 764 mm Table: clamping table Equipment: • Chip conveyor • Automatic tool changer (ATC) • Tool magazine: 24 positions

Condition: used, Year of construction: 2016, x-travel 1270 mm y-travel 508 mm z-travel 635 mm Rbsdpfxeyfw Dcs Ahzst control Haas

Year of construction: 2014, condition: ready for operation (used), A CNC vertical milling machine Haas is available. Travel X/Y/Z: 762mm/406mm/508mm, feed rate: 16.5m/min, rapid traverse: 24.4m/min, table dimensions X/Y: 914mm/356mm, max. table load: 1361kg, tool stations: 24, tool holder: SK40, spindle speed: 15000rpm, power: 5kW/7kW, torque: 63Nm/88Nm. Machine dimensions X/Y/Z: approx. 2500mm/2350mm/2550mm, weight: approx. 3600kg, operating hours: approx. 15700h. Including full enclosure, 3D infrared probe Renishaw 40-2, zero point clamping system, vacuum unit and a set of tool holders. Documentation available. An on-site inspection is possible. Rbodpfeyfv Ndox Ahzot