Machine Saver Romania

Year of construction: 2009, Condition: excellent (used), Functionality: fully functional, machine/vehicle number: 0460013, We sell a Revent 4 doors proofer for 8 racks, model:PB06/1Xeb10, MFG 2009, excellent condition. The profer is dismantled properly and has a montage schema. Made in Sweden Voltage: 3 Ph 380-400 V + N+ PE 50 Hz; Total load 10,5-11,5 kW Heat capacity 10-11 kW Rated current 17-17,8 A Total weight dismantled with the stainless steel floor approx. 600 kg. Gslhjwh Unxecdwxoit Price Euro 3.200 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, machine/vehicle number: 21000575, Peristaltic pump ALLMOVE ASH 15 GN-ID/1, year 2021, serial number: 21000575, very good condition Peristaltic pumps of the ASH series from Allweiler have a unique design that allows them to work with the most complex liquid media. They are capable of pumping almost any fluid or very viscous substances, including aggressive agents or flows contaminated with solid or fibrous inclusions. Pumps of this type are widely in demand in many industries as an effective and reliable means of transporting liquids of various natures. The working unit is based on the following design elements: a thick-walled elastic hose for conducting liquids and a rotor with a shoe for pressing and pushing the flow. With this pumping principle, there is no turbulence or emulsification of liquids. Self-priming units, easy to set up and install, the possibility of reversible operation. Sealing of the drive with a sealing ring. The cooling agent is located directly in the pump body. Gislowhmm Hjhcdwxot Pumping liquids: highly viscous substances, containing abrasive, solid particles or fibres, gas-containing, aggressive agents. Application areas: wastewater treatment, chemical industry, paper production, food industry, agriculture, etc. Characteristics of ALLMOVE ASH 15 GN-ID • Volumetric flow: up to 60 m³/hour; • Supply pressure (PD): up to 16 bar; • Differential pressure: up to 15 bar; • Liquid viscosity: up to 100,000 mm²/s; • Permissible sizes of solid particles: 5 - 33 mm; • Permissible fiber length: 150 - 820 mm; • Liquid temperature: up to 80 °C; • Installation: dry, horizontal, on a support plate. Price Euro 4.800 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2024, Functionality: fully functional, Used multiprocess MIG/MAG welding machine EWM Phoenix XQ 500 puls DW EX R1 5 m, MFG 2023 Multiprocess MIG/MAG pulse welding machine including all characteristics and welding processes, decompact, demodular Drive XQ wire feeder, Drive XQ HP WRS/WHS, MFG: 2023 Pivot support for wire feeder, “blueCool” coolant to -10 °C (-14 °F), 5 l, 5 l Intermediate hose package, water cooled, 14-pole, 1.8 m Gelhcdwewgy Eyjxoit Welding torche PM 551 W LED X M9 3 m Wire spool adapter B300, MIG/MAG function torch with OLED graphic display, water-cooled, X technology, 4 m Workpiece lead with clamp, 550 A / 60 %, 95 mm² Pressure regulator with manometer, 30 l Mains plug, assembled, Workpiece lead with clamp: WK95mm² Ø 13 mm 550A/60% 4m/Z Crane frame – moves the crane lifting point from the bottom to the top Intermediate hose package, water cooled, 14-pole Cross-section: 95 mm²: Z MIG XQ 95 mm²/1.8 m 500A/80% AK300 Wire spool adapter for use with a wire basket spool (B 300) Setting range for welding current 5 A - 500 A Duty cycle 40 °C 500 A / 80 % 470 A / 100 % Open circuit voltage 82 V Mains voltage (ex works) 3 x 380 V - 400 V Mains voltage (possible) 3 x 440 V - 460 V Mains voltage (possible) 3 x 480 V - 500 V Mains tolerances (ex works) -25 % up to +20 % Mains frequency 50 Hz / 60 Hz Recommended generator power 33.2 kVA Efficiency 90 % Power consumption Pi 26 W Cooling capacity at 1 l/min.1500 W Pump pressure 3.5 bar Tank capacity 8 l Protection classification IP23 EMC classA Dimensions (L x B x H) 1152 mm x 686 mm x 976 mm Weight 125.5 kg / 276.7 lbs Standards IEC 60974-1, -2 and -10 CL.A Price Euro 8.400 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: like new (used), Year of construction: 2024, operating hours: 200 h, Functionality: fully functional, machine/vehicle number: 159422, Verderflex Dura 35 peristaltic pump, serial number: 159422, MFG: 2024 For demanding applications, the Verderflex Dura 35 provides: Maximum flow rate: 5,292 L/hr Maximum pressure: 16 bar Maximum medium temperature: 80 ºC Compressible solid size: 8.75 mm Suction lift: 9.5 mWc Certification: ATEX, FDA and EC/1935 Pump Housing made from cast iron (GG25) Front Cover made from carbon steel with plexiglass inspection window Rotor made from cast iron (GG25) Drive Shaft EN24T Steel Mounting Frame made from carbon steel Torque Arm made from carbon steel Bearing made from bearing steel Flow 11/hr Pump speed 35 PM Installed motor power 25W Max turndown at 5 Bar discharge pressure 101 Verderflex peristaltic pumps are the ideal low cost life cycle solution for the transfer and dosing of difficult to pump fluids such as viscous, abrasive or high solid content liquids such as slurry and sludge. Sizes range from small models such as OEM pump modules, precision and industrial style tube pumps to the world's largest hose pumps, used in the most demanding applications. These include water treatment, biotechnology, food & drink production, mineral processing and chemical manufacturing. Features : • Peristaltic pumps are excellent problem solving pumps and offer the following benefits: • Abrasion Resistant • No moving parts in the liquid stream • Accurate Dosing • Self Priming • Can pump liquids containing up to 80% • inorganic solids (fines) • Aseptic pumping • smooth liquid passage • Easy and completely cleanable without disassembly • Suitable for handling shear sensitive products • Can run dry • Low cost of ownership • High suction capability of up to • 95% vacuum or a 9.5 mWc • No seals • Reversible rotation, empties line or blockages • Can pump • abrasive, very viscous or • high density fluids Application for abrasive fluids : Lime mixing, Kieselguhr, circulation and dosing Application for corrosive fluids : Ferric Chloride, Copper Sulphate and similar Activators, process chemicals, Acids, including Alkalis Application for shear sensitive fluids : Coagulants, Flocculants and bacterial remediation treatments Application for mining industry : Dosing Process Reagents, Thickener Underflow, polymers and slurry transfer Application for water treatment : Dosing Lime, Hypochlorite, Silicate, Polymer, Ferric Chloride, sludge transfer and filter press feeds Application for chemical Industry : Corrosive Acids, Bases and Hydrocarbons Application for Printing and packaging : Inks (including water based inks), Paints, Dyes and Glue Application for Battery Filling, Chemical Cleaning, Equipment Sterilising, Seed Coating : Biocides, Hydrogen Peroxide, Sodium Hypochlorite, Caustic Soda Application for Laboratory Systems : Biological Broths to polluted streams Application for Agriculture : Feed Additives, Animal Vaccines and Waste Transfer Application for Paper and Pulp : Pulp and Dyes Food and Beverage : Breweries, Diatomaceous Earth, wineries, dairies, sugar refining, abattoirs The pump is in excellent condition, like new. Giolhcewdtbcsdwxst Price Euro 5.400 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2024, Functionality: fully functional, machine/vehicle number: 6125, We sell a used CEVISA beveling machine CHP-60G INV, MFG 2024, SN: 6125 60 mm bevel length; capability in one run: 28 mm bevel length; bevel finish: machined (milling head); adjustable bevel speed depending on the material; optimum beveling speed: 500 mm/min; continual plate fixing pressure system: 4 Bar; 3 feeding rollers always in contact with the plate; 1 roller positioned in the cut-off point to insure: - no vibration; no noise; -smooth and unchanging finish; portable milling machine; mobile and stable; adjustable working height with pneumatic lifting system; electronic bevel adjustment; display: high precision; built-in adjustable bevel angles from 15º to 70º * Nominal thickness: from 10 mm to 100 mm. Motor: three-phase; motor power: 5 CV – 3.8 kW; voltage: 220/380 V. 50 Hz; 250/440 V. 60 Hz; 32 A plug, cable diameter: 2.5 millimeters, maximum consumption of the machine: max. 15A. Electric box with: thermomagnetic switch trip +emergency stop button net weight: 800 kg; works height: adjustable from 760 to 940 mm; built-in trolley; bevel blueprint; plate beveling: K, V, X and Y bevels, bevel speed: 0,5 m/min, three-phase motor: three phases and earth. no neutral, motor power: 5 hp - 3.8 kW, air flow rate 200 l/min. Electrical box: with under voltage trip, emergency stop button, magneto-thermal protection; net weight of the beveling machine: 800kg, working height: adjustable from 760 to 940 millimeters. Integrated carriage. Price: 46.900 Euro + VAT, negotiable , FCA Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. Gjlhcdwov Ef Rysxoit We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2024, Functionality: fully functional, machine/vehicle number: 6119, We sell a used CEVISA beveling machine CHP-60G, MFG 2024, SN: 6119 60 mm bevel length; capability in one run: 28 mm bevel length; bevel finish: machined (milling head); adjustable bevel speed depending on the material; optimum beveling speed: 500 mm/min; continual plate fixing pressure system: 4 Bar; 3 feeding rollers always in contact with the plate; 1 roller positioned in the cut-off point to insure: - no vibration; no noise; -smooth and unchanging finish; portable milling machine; mobile and stable; adjustable working height with pneumatic lifting system; electronic bevel adjustment; display: high precision; built-in adjustable bevel angles from 15º to 70º * Nominal thickness: from 10 mm to 100 mm. Motor: three-phase; motor power: 5 CV – 3.8 kW; voltage: 220/380 V. 50 Hz; 250/440 V. 60 Hz; 32 A plug, cable diameter: 2.5 millimetres, maximum consumption of the machine: max. 15A. Electric box with: thermomagnetic switch trip +emergency stop button Giolhcsv Ed N Iodwxot net weight: 800 kg; works height: adjustable from 760 to 940 mm; built-in trolley; bevel blueprint; plate beveling: K, V, X and Y bevels, bevel speed: 0,5 m/min, three-phase motor: three phases and earth. no neutral, motor power: 5 hp - 3.8 kW, air flow rate 200 l/min. Electrical box: with under voltage trip, emergency stop button, magneto-thermal protection; net weight of the beveling machine: 800kg, working height: adjustable from 760 to 940 millimeters. Integrated carriage. Price: 44.900 Euro + VAT, negotiable , FCA Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2023, Functionality: fully functional, Used semi-automatic swivelling frame band saw, KASTOmicut U2.6, MFG: 2023, serial number: 6153102136, excellent condition, very little used, it will be delivered with the two rollers from the pictures. Universal, semi-automatic band sawing machine of very robust construction, designed for the rough use in workshops and capable to perform any cutting-to-length or miter cutting tasks (-45°/+60°) in the case of tubes, profiles and solid material. The infinitely adjustable cutting speed and the infinitely adjustable fully hydraulic cutting feed allow a sensitive and blade-saving cutting. Technical Data Cutting range 90° round: 260 mm Cutting range 90° flat (W x H): 310 x 260 mm Dimensions (L x W): 760 x 1620 mm Height, saw head lowered position: 1690 mm Height, saw head in highest position: 2040 mm Material support height: 950 mm Total weight: 510 kg Performance characteristics Total power: 2.0 kW Saw motor, power – frequency controlled: 1.5 kW Cutting speed infinitely variable – frequency controlled min 20 – 110 m/min Dimensions of saw blade: 3180 x 27 x 0.9 mm Saw blade guides: lateral guiding rollers and back slide bearings, interchangeable Material clamping: mechanical Cutting feed: hydraulic, infinitely variable Saw blade tension: mechanical Saw blade cleaning: by synchronously running, easy to interchange brush Electrical equipment: in accordance with DIN EN 60204. Supply voltage 440 Volt, 60 Hz. Control voltage 24 Volt, DC. Upon request other voltages at additional cost. Working Cycle (Semi-Automatic) Infinitely variable and fully hydraulic saw feed control Rotary table serving as material support Horizontal vice with quick adjustment and hydraulic short stroke Infinitely variable cutting speed 20 – 110 m/min via frequency regulated drive Coolant system with two coolant nozzles Automatic switch-off after end of cut and return stroke of the saw head by approx. 100 mm Infinitely variable mitre adjustment (-45° to + 60°) Infinitely variable saw blade arm adjustment Electrical protection of the saw blade covers (accident prevention rules) Synchronously running chip removal brush Glue anchors to dowel the machine Bi-metal saw blade, 4 - 6 teeth per inch Operating instructions manual according to the EU Machinery Directive and EN 82079 Golhcovyl Ihedwxsit Price: 18.100 Euro + VAT, negotiable , FCA Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Used semi-automatic swivelling frame band saw, KASTOmicut U2.6, MFG: 2023, serial number: 6153102135, excellent condition, very little used, it is delivered with the roller from the pictures Universal, semi-automatic band sawing machine of very robust construction, designed for the rough use in workshops and capable to perform any cutting-to-length or miter cutting tasks (-45°/+60°) in the case of tubes, profiles and solid material. The infinitely adjustable cutting speed and the infinitely adjustable fully hydraulic cutting feed allow a sensitive and blade-saving cutting. Technical Data Cutting range 90° round: 260 mm Cutting range 90° flat (W x H): 310 x 260 mm Dimensions (L x W): 760 x 1620 mm Height, saw head lowered position: 1690 mm Height, saw head in highest position: 2040 mm Material support height: 950 mm Total weight: 510 kg Performance characteristics Total power: 2.0 kW Saw motor, power – frequency controlled: 1.5 kW Cutting speed infinitely variable – frequency controlled min 20 – 110 m/min Dimensions of saw blade: 3180 x 27 x 0.9 mm Saw blade guides: lateral guiding rollers and back slide bearings, interchangeable Material clamping: mechanical Cutting feed: hydraulic, infinitely variable Saw blade tension: mechanical Saw blade cleaning: by synchronously running, easy to interchange brush Electrical equipment: in accordance with DIN EN 60204. Supply voltage 440 Volt, 60 Hz. Control voltage 24 Volt Working Cycle (Semi-Automatic) Infinitely variable and fully hydraulic saw feed control Rotary table serving as material support Horizontal vice with quick adjustment and hydraulic short stroke Infinitely variable cutting speed 20 – 110 m/min via frequency regulated drive Coolant system with two coolant nozzles Automatic switch-off after end of cut and return stroke of the saw head by approx. 100 mm Infinitely variable mitre adjustment (-45° to + 60°) Infinitely variable saw blade arm adjustment Electrical protection of the saw blade covers (accident prevention rules) Synchronously running chip removal brush Glue anchors to dowel the machine Gslhcdovyl Dvowxoit Bi-metal saw blade, 4 - 6 teeth per inch Operating instructions manual according to the EU Machinery Directive and EN 82079 Price: 18.500 Euro + VAT, negotiable , FCA Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2012, Functionality: fully functional, machine/vehicle number: PO201200633, Anko, used dough sheet making machine, model: ABS-220, serial number: PO201200633, MFG: 2012-08, made in Taiwan, 380 V, 3 Ph, 50 Hz, 2.25 kW, sheet roller width: 220 mm, thickness dough: 4 - 12 mm; plastic dough belt can be ajusted, belt width: 250 mm, total dimensions: 1850 mm x 1020 mm x 1520 mm. With add-on equipment and mechanism, it can also produce noodles The Anko ABS-220 is an automatic dough sheeter, part of a broader range of equipment designed for heavy-duty use in food production. This particular model is suitable for various baking and pastry applications, emphasizing efficiency and consistent performance. It features automatic functionalities, likely including precise roller adjustments and easy cleaning capabilities, making it a practical choice for enhancing production lines in professional environments. The ABS-220 model fits within a context of tools aimed at simplifying and speeding up the preparation processes in commercial kitchens and bakeries. Price 19.900 Euro + VAT, FCA Oradea, Romania Video: Irrtum, Anderungen und Zwischenverkauf vorbehalten /Subject to errors, changes and prior sale /Ne rezervăm dreptul la greșeli, modificări și vânzare Gslhcdsvwg Nnewxsit We speak English. /Wir sprechen Deutsch/Beszélünk magyarul/Nous parlons français/Vorbim romana.

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 161.40.492, Used Strautmann bale press, type: BalePress 3, serial number: 161.40.492, year of construction: 2020, with tape extraction hook Power supply: 230 V 50 Hz Electrical Power: 0,75 kW Protection class: IP54 Pressing force: 27 kN Press stroke: 580 mm Weight of the machine: 275 kg Transport dimensions (lxwxh):1070 x 754 x 2110 mm (without pallet) 1070 x 754 x 1945 mm Filling opening (wxh): ca. 700 x 450 mm Cycle Time: 27 sec. Bale weight 30 kg Bale size in the chamber (lxwxh)*: 500 x 700 x 500 mm Bale tying: strapping with two twines, PP band ADVANTAGES Easy to install and transport Easy to handle bales Giolhjvvk T Iscdwxjt Practical emptying of bales Foil/cardboard mode switch Simple and safe operation Stable door locking system Stable guide of the press plate "D" level security system. Small space required BP3: Bale tying system with open door; BP3CD: tied bales with door closed Solid construction Wheel door lock Ideal for small shops. The Strautmann BalePress 3/3CD is a small, single-chamber baler. At the same time, it is perfectly suited for baling common and smaller quantities of paper, foil, PET bottles and plastic waste and, thanks to its compact design, it can also fit into a very small space. It is clearly the best alternative for our partners with less waste and a waste container with a small footprint. Depending on the pressed material, the 3 ton pressing force can result in a volume reduction of up to 90%. The machine can produce relatively small and therefore easy to handle bales of up to 35 kg. By using it, significant savings in storage and transportation costs can be achieved. Bales are easier to transport and sell than untreated waste. Due to its dimensions, the machine can also fit in a very small space, and because of this, the baling technology is no longer available to our partners who have limited space. Price 3.490 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2010, We sell 156 used stackable-nestable bread crate, make BROBAN KRAT with metal 7 rollies in very good condition. This type of crate, a stackable-nestable bread crate, make BROBAN KRAT, with a capacity of 47 liters and dimensions of 700 x 496 x H 190 mm, offers versatility and convenience for the bakery industry. This crate is designed to meet the needs of both transporting and displaying various types of bread. Gislhevuclgocdwxet With its galvanized stacking handle and stacking lugs, the crate is ideal for multi-level stacking, allowing for space-saving and efficient use of storage space. Whether it's organizing stock in the bakery or transporting bread to different locations, this functionality provesto be highly beneficial. The perforated bottom and side walls not only provide strength and durability to the crate but also ensure proper air circulation. This promotes the freshness of the bread by guaranteeing optimal ventilation during both transport and storage. This crate is a versatile solution suitable for all types of bread, from baguettes to artisan loaves. Thanks to its features, it is ideal for bakeries that value both efficiency and maintaining the quality of their products during transport and presentation. Price 2,000 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2018, Condition: excellent (used), Functionality: fully functional, Used heat-sealing machine for medical blister, make: MEDIPACKER, model: TS 3535, Serial number: 635-231; MFG: September 2018, dimensions: Width 470 mm X Depth with guide bars 710 mm X Height 660 mm, net weight 112 kg without tools, seal surface 350 x 350 mm Max., depth of Blister 105 mm; The used heat-sealing machine is sold with the mould (please check the pictures); The filled blister packs are placed on the support plate. The die-cut lid is placed on the blister pack; positioning is using pins. The carriage is pushed to its rearmost stop. The sealing cycle is initiated automatically. After the sealing cycle, the carriage is pulled back again. With its compact and durable design, this table model has been specially developed for the medical industry and use in clean room areas. The three process parameters— Time, Pressure, and Temperature—are regulated to the tightest tolerances, resulting in a high-quality package. Rust-free INOX construction with aluminium parts anodized. The sealing temperature is digitally programmable up to max. 190 °C feedback control accuracy at 130 °C = ± 1.0 °C measured at the hotplate PID feedback control system. The sealing force is programmable via touch screen from 6 kN to 36 kN, adjustable in 1 kN steps, repetition accuracy within 0.5 kN. The sealing time is programmable from approximately 1.0 to 9.9 seconds. The program is adjustable by 0.1 seconds each. The repetition accuracy is better than 0.15s. Output approx. 12 Cycles/Minute, without placing and removal of trays compressed air connection 0,6 Mpa/6 bar, tube outside 12 mm, tube length 3 m. The compressed air must be supplied filtered and dry. The consumption of compressed air per cycle at 16,5 NL to 0,5 MPa; The electrical connection is 230 VPNE 50/60 Hz, max. 2300 VA; 3 x 400 V, 50 Hz, max. 4100 VA Sealing lid from a film roll For Romanian companies, finance leasing or credit in instalments is possible, with a minimum of 50% down payment. Price 7,500 Euro + VAT, negotiable, FCA: Oradea/Romania Gelhsvubapecdwxjit Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare

Condition: reconditioned (used), Year of construction: 2020, Functionality: fully functional, machine/vehicle number: W20-0648-01, Kiekens mobile dust extractor, type: DMF1258M-B1Z22, number: DM1200000, year of construction: 2020, 400 V, 3 Ph, 50 Hz, 16 A, 2.2 kW, weight: 330 kg, dimensions: 800 mm x 950 mm x 2100 mm, serial number W20-0648-01. The dust extractor was completely cleaned and checked. Dustmaster 1200 The Kiekens Dustmaster DM1200 series is designed to quickly and effectively extract (fine) dust. By applying the Kiekens K-series modular concept, the Kiekens Dustmaster DM1200 series can be widely used. The DM 1258 is designed for a variety of extraction processes, in either fixed, centralised or mobile applications, for: ƒ grinding / milling / polishing ƒ sandblasting / sanding ƒ cutting / routing ƒ packaging / mixing ƒ welding. ■ Extraction of powders, chips and fumes including: ƒ metals ƒ plastics / synthetics ƒ food / pharmaceutical ƒ rubber / leather ƒ wood ƒ others ■ A 2m or 3m extraction arm for variable extraction movement is optional. Principle of operation and benefits: The dust-loaded air enters the Dustmaster through the Ø160mm inlet via a hose or extraction arm (optional upon request). o The elbow arrests dust movement, and the tangential inlet causes a cyclonic effect to enhance the separation of the dust from the air stream. p The heavier dust particles are separated from the air stream and collected in the oversized 120 litre dust container. The large volume enhances dust settlement and allows longer operations. q The air streams upwards towards the powerful 2.2 kW industrial fan which produces high suction performance. r The lighter dust particles are collected on the large high efficiency M class 5.8 m2 envelope (or 8.8 m2 cartridge) filter, with DM 1258M (ENVELOPE FILTER) ƒ Heavy duty Polyester needle felt (PNF) with Teflon coating, envelope type filter design ƒ High efficiency, M class. Motor starter with phase indication lamp ƒ Filter monitoring pressure gauge; Filter cleaning handle for DM 1258 (motorised option available) High capacity 120 litres dust container provides high dust handling capacity. ƒ Castors for easy movement ƒ Detachable with simple release lever ƒ Gjlhcdovccc Ijwxsit Special versions for the explosion zones 2 (gas) and 22 (dust) are available. Other zones and earthed options on request. Disposable bags can be used to line the container For the Romanian companies, there is the possibility of finance leasing in instalments with a minimum of 40-50% down payment. Price - Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: ready for operation (used), Year of construction: 2001, Used- Waston-Marlow Bredel peristaltic pump, (3 pcs on stock), model SPX65, MFG 2001, serial number 20340, fully functional, carbon steel, approximate capacity 533,36 litres per minute, (6,7) litres displacement per revolution, 2-1/2" inlet/outlet, driven by a 5 hp, 3/60/208-230/460 volt, 1750 rpm motor. The pump is mounted on a frame. - Maximum flow rate: 32,200 l / h - Capacity: 6.7 l / revolution - Maximum discharge pressure: 16 bar - Maximum temperature: 80 ° C - Pumping element inner diameter: 65 mm - Lubricant required: 20 liters - Starting torque: 1150 Nm Peristaltic pump with a single high capacity direct drive design, which combines the small size of the closed with the reliability and ease of use of pumps with universal coupling. It has robust bearings located in the centre of the pump rotor, eliminating radial loads. The ultra-compact, high torque gearbox is aligned directly with the pump housing, being fully protected by an innovative buffer zone. These pumps can be used, among others, in the food industry and beverage as CIP applications, wine, beer, dairy, bakery, flavourings and additives. Bredel heavy duty industrial pumps have the ability to transfer a wide variety of products such as slurries, pastes and abrasive slurries with 100% volumetric accuracy. Unlike diaphragm, lobe or progressive cavity pumps, no moving parts come into contact with the conveyed fluid and there are no mechanical seals. The pumped fluid is contained entirely within the long-resistance tubing, so the operator does not come into contact with chemicals, slurries or sludge. Each Bredel hose is precision-crafted to ensure stable flow and high-performance pump performance, even in the most demanding liquid handling processes. Price Euro 2,450 Euro + VAT, negotiable, FCA: Oradea/ Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana Gslhceuzarhsdwxeit

Year of construction: 2020, Condition: good (used), Functionality: fully functional, machine/vehicle number: 233846, We sell a used system BIO TURBO 6000, MFG: August 2020, serial number: 233846 Areas of use: medical, food: storing vegetables and fruits. Golsurf I Ujhcdwxsit The model BIO TURBO 6000 Maximum volume up to 200000 ft³ (6000 m³) per 24 hours. The Airflow 150 CFM (4 CMM). Location requirements are: electrical source 100-240 VAC. The circuit breaker 15 A Maintenance air filter must be changed every 6 months. The ozone Plate(s) must be changed every 12 months. The number of ozone plates are 4. Specifications - dimensions: generation chamber 10 x 12 x 10 inches (25 x 30 x 25 cm) Catalytic converter/ controller 12 x 19 x 16 inches (30 x 48 x 40 cm) Reaction Chamber 4 x 8 x 2 feet (122 x 244 x 61 cm) Total net weight 160 lb (60 kg) Construction materials: generation chamber aluminium Catalytic converter/controller: aluminium Perforated generator plate: stainless steel Controls Remote Control Power Switch LED’s for quick diagnostics Remote On and Off control Easy service Easy changing of ozone plates and filters Four models for proper coverage Aluminium and Stainless Steel generation chamber Easy to install and operate Low maintenance The Bio Turbo 6000 is referred to, as the BT 6000. The 6000 indicates the amount of cubic meters the unit can properly control within a 24 hour period. The BT 6000 was designed to remove ethylene from cold rooms and storage areas where fruits and vegetables are stored in order to extend their storage life. The BT 6000 was designed to remove ethylene from cold rooms and storage areas where fruits and vegetables are stored in order to extend their Bio Turbo effectively removes ethylene gas (to prevent premature ripening), bacteria, mold spores and viruses The Technology Bio Turbo is a patented technology for cleaning the air from all sorts of airborne organic compounds. Bio Turbo effectively removes ethylene gas (to prevent premature ripening), bacteria, mould spores and viruses. What differentiate Bio Turbo from competitors is its affordability and the ease of maintenance making it a great solution for commercial applications. Price: 11,500 Euro + VAT, negotiable, FCA: Oradea/ Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2015, Condition: good (used), Functionality: fully functional, machine/vehicle number: 000575, We sell a used CURIEMENTOR 4 isotope calibrator made by PTW-Freiburg , MFG: 2015, SN: 000575 This equipment is a precise measuring instrument for nuclear medicine. The equipment contains the PET, the ionization chamber; lead housing for the ionization chamber; transport box for syringes with radiopharmaceutical; TSS 5 Ecarn syringe 5 cc - 2 pcs; TSS 10 Screen syringe 10 cc; Radiagem 2000 dosimeter with SABG-15+ probe. Dose calibrator (CURIEMENTOR 4) are used in nuclear medicine (SPECT and PET) to determine the exact activity of radioactive dose administered to the patients. The user has direct access to 30 different isotope calibrations. When measuring isotopes with rapid decay, the displayed measuring values are updated each half second, which provides continuous display. Price Euro 7500 Euro + VAT, FCA: Bucharest/ Romania Gjlhcdwsunb Atsxeit Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: good (used), Year of construction: 2017, 3D Printer ORLAS CREATOR SLM250, MFG 2017,-the equipment shows little use; the tablet has a cracked screen; it does not have a 3D scanner component, SN: SLM250172801 makes complex parts, using metallic or non-metallic powders; wireless controller; benchmark dimensions achieved: 100 x 100 mm; gas used as protective atmosphere: argon/nitrogen; layer size: 20-100 micrometers; laser type: Yb Fiber Laser 250 W; wavelength: 1070 nanometers; Precision F-Theta lenses; dimensions: 717x858x1794 mm; mass: 470 kg; specific software: Creator user interface, APP Suite application "3D printing"; IMPORTANT: The equipment shows little use; the tablet has a cracked screen; it does not have a 3D scanner component; Specifications Building volume: ø = 110 mm x 100 mm Powder reservoir volume: ø = 110 mm x 200 mm Gjlheunaqvocdwxoit High power 250W cw Yb: Fibre laser Wave length: 1070 nm High efficiency Exceptional beam quality and power stability Air cooled Spot size: 40 µm - 120 µm Process chamber • High-end process chamber, suitable for low-oxygen process environment • Recommended inert gas: Argon / Nitrogen • included extraction unit for cleaning of the process environment (max. flow rate: 190m³ / h) Coating system - 360° circulating coater for high efficient coating process - Rubber coating blade - Micrometre screws for optimum coater alignment User interface - 12’’ Microsoft Surface Pro 3 tablet controller - Unique wireless control concept - Easy control of all printing parameters - Cloud manufacturing concept Dimensions - System dimensions: 717 mm x 858 mm x 1794 mm - Machine opening: 450 mm x 180 mm - Power supply: (V/Ph/Hz): 230/1/50 - Power setting: max. 10 A - Weight: 430 kg CAD / CAM Software APP SUITE, including 3D printing application - solid slicing of 3D objects - extended repair functionality of 3D parts - automatic generation of support structures - complete control of all printing strategy Parameters Welcome Package - - APP SUITE Software Basic Package - - Accessories Zero-Point Clamping System - - Adjustment aid for aligning the construction platform - - Hose adapter for inert gas supply 6mm to 1/4inch - - Cleaning cloths and optics cleaning liquid - - ESD brush for safe system and component cleaning - - Allen key set - - Stainless steel shovel Price Euro 38,900 Euro + VAT, FCA: Bucharest/ Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2022, Condition: as good as new (ex-display), Functionality: fully functional, machine/vehicle number: 1793, NEW MOTORIZED PORTAL CRANE, MFG 2022, brand COMEGE PORTMOT 5000/7/, produced in Romania with French components, load capacity 5,000 kg, max load: 5,000 kg; frame 7000 x 5250 mm; hoist stroke between poles: 6000 mm; height to the transverse beam: 4800 mm; chain hoist; motorized travel; own weight without accessories: 1600 kg; 2 fixed motorized wheels; 2 rotating wheels; obstacle detectors mounted in each corner; excellent optical and technical condition. Many manufacturers already have this type of product, but it stands out for its ability to move a load of up to 5 To, controlled by a radio control by rolling and rotating in all directions directly on the ground. In fact, no railway or civil engineering is required for its use. The motorized gantry also gives you the ability to move a load from one workshop to another. Safety is ensured thanks to the 4 full stop detectors. The portal allows rotation on its own due to the inversion of the motors and the collector connected to the electrical source offers the user the possibility to do 360°. For Romanian companies, there is the possibility of leasing. Price Euro 33,900 Euro + VAT, FCA: Oradea / Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Golhcoum Hhledwxeit Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2020, Functionality: fully functional, ID BYP01 We sell a used Chinese - PP melt-blown fabric extrusion line for melt blown, make: Zhangjiagang Sevenstars Machinery Co., Ltd., MFG 2020. It was used for a short time. excellent condition. All EU import duties have been paid. Output max 400 kg per 24 hours. General description: 1. Product size: PP melt blown fabric with width at 600mm (after trimming 17m*3) 2. Main Material: PP compounding material 3. Extruder type: SJ65/33 single screw extruder 4. Output capacity: 350-400kg/24hour 5. Electric power supply: 3phase, 380V; 50Hz 6. Additional equipment: • Vacuum feeder • Raw material dryer • Mesh manual filter • T-mould for melt blown fabric • Static electrical discharge equipment • Belt type forming 850mm • Collecting device • Winder and slitting Model L/D Output Speed of Screw Rotationl Power Center Height SJ-65 10-33 80-150kg/h 20-120r/min 18.5kw 1000mm This line contains the following machines: Automacic vacuum loader ZJ-400 and hopper dryer make RHONG model RDM-25, MFG 2020; Gjlhcdsuiq Dhowxjit Single screw extruder, model SJ65/33, MFG 2020; Heating oven for hot air, model HJGF101-4, MFG 2020; Extrusion T-mold, model: SUS630, made in Japan, MFG 2020; Forming device, MFG 2020; Winder & slitting system, MFG 2020; Oil free air compressor, MFG 2020; The PP melt blown nonwoven production line is a polymer melt extruded from a screw extruder. The polymer is extremely stretched by high-speed hot air or other means to form very fine short fibers, which are aggregated to A web is formed on a roller or a screen curtain, and is finally reinforced by self-adhesion or thermal bonding. Its unique properties are widely used in mask filter materials, thermal insulation filling materials, medical health materials, wiping materials, etc. The finished product can pass the N95 standard as the core material of the mask. Process of melt blown nonwoven production line Polymer preparation --- Melt extrusion --- Metering pump --- Melt blown die head assembly --- Solution thin-flow drawing --- Fibber cooling --- Auxiliary network --- Electrostatic electret --- Reinforced finished product. Melt-blown cloth is produced by melt-blown process. The equipment mainly includes: screw extruder, melt pump, screen changer, melt-blown device, winding device, air system (hot air blower and heater), etc. The function of the screw extruder is to melt the slice material; the role of the melt pump is to accurately measure, control the output and the fineness of the fiber, and continuously and evenly transfer the melt to the spinneret. The function of the screen changer is to filter out impurities in the melt so as not to block the spinneret holes. The function of the winding device is to pack the melt blown cloth into rolls. The function of the air system (hot air blower and heater) is to provide the temperature and pressure of the hot air used in the drawing of the spinning air stream. Price Euro 39.200 Euro + VAT, negotiable, FCA: Oradea / Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 1999, Condition: defective spare-parts repository (used), Functionality: limited functionality, machine/vehicle number: 2200268., We sell an automatic packaging machine (stretch film packaging machine, tray packaging machine ), ULMA model COMPACT, MFG 1999, SN: 2200268. Packaging for trays with stretch film including Bizerba scale type: 18-A (max 3/6 kg, min 20 gr) and Bizerba labeller GH both with serial number: 1713392 Ulma data: electrical power 1.2kw, 400V voltage, frequency 50/60 Hz and consumption of 5A. Gjlhcdwsuiq Dboxjit Technical characteristics: Reduced space required. Fully automatic operation. Semi-automatic coil change. Packaging with PVC, Polyethylene and Polyolefin films. Anticorrosive construction. High wrapping quality with minimum film consumption. Wrapping of products without tray. Approved according to E.C. regulations. packaging machinery. It is the ideal choice for the different food sections of small and medium-sized points of sale where, integrated with manual weighing and labelling systems, a significant speed and production rate are required, while maintaining small dimensions and ease of use. IMPORTANT: The machine is sold in a non-functional state, with no knowledge of the eventual error. The buyer should repair it or use it as a spare parts donor. Price Euro 1,900 Euro + VAT, FCA: Oradea / Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2007, Used, 2 units identical engine, brand ADDA Antriebstechnik, YOM: 2007, SN 1: 50406 and SN2: 50412, 15 kW, IP55, IEC 34-5, f = 50/60 Hz, own weight 140 kg/unit. Golhcdwoucn Ahjxjit Both in very good working condition. We have tested them. We can sell also just a single unit on request. Sales price: 1.300 Euro + VAT both of them, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2007, Used, draw through water/glycol cooler, brand Alfa-Laval type INR W S 6777D/Y. YOM: 2007, SN: 2190988. Max DN = 57 mm; Vn = 3҇230/400V, fluid group 2, coil TS 110/-40°C, F = 50 Hz, PT = 10 bar, PS = 9 bar, own weight: 604 kg. This, in very good condition draw through water/glycol cooler is equipped with: 2 pieces Ziehl Abegg ventilators 07078866, FC063-4DS6KV7, each Ø500, 1,19 kW, 1360/1000RPM; COSY 085, surface more than 90 m2, aluminium casing/aluminium fins Golhcdeucnzwswxoit Mentioned cooling capacity is with a water/glycol mixture of 30% at a water/glycol basis. Sales price: 2.960 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2008, For sale complete PVC carpentry production line, brand URBAN, composed of: *1. Welding machine at 2 ends; URBAN brand, model: AKS 5305-FF, serial number: 53372, year of manufacture: 2007, perfect working condition; *2. Channel milling machine; URBAN brand, model: WS 103, serial number: 790, year of manufacture 2007, perfect working condition; *3. 2-headed saw: brand RAPID, model DGS 100, serial number: 004606128, year of manufacture 2010, sold together with vacuum cleaner with bags, perfect working condition; Gijlheucl Dcjcdwxst *4. MACC rebar cutting saw, model NEW 275, serial number: 88266, year of manufacture 2008, perfect working condition; *5. Pantograph brand URBAN, model MLA A23 – 100466321S, serial number: 528-0, year of manufacture: 2008, perfect working condition; 6. Upright milling machine: URBAN brand, model M7CRH-100149891, serial number 559, year of manufacture 2008, perfect working condition; *7. De burring machine with 2 groups of cutters; brand URBAN, model SV 280, serial number: 29342, year of manufacture 2008, perfect working condition; *8. Saw for cutting sticks: brand URBAN, model GLS 102; serial number: 102015; year of manufacture 2010, perfect working condition; The production capacity of the line is 30-50 units/8h (depending on the number of people serving the line). The line was used very little from 2010 to 2014, and not at maximum capacity. We can also sell individual machines on request from the line. Net price complete line 33.500 Euro + VAT, negotiable, FCA Oradea.

Condition: new, Year of construction: 2021, We sell 6 units new pneumatic dispenser in stainless steel inox electro-polished, volume 18 kg, made in Italiy by GMC, model 402E, complete ready to use with : 1 manual high pressure spraygun with adjustable flow, brand Wagner Air, model Colora SP5, 08 mm 1 universal nozzle 1 manometer 1 hose 4 meter lenght Giolhcdwotu Enqexot 4 system are with high pressure spray gun 2 system have no high pressure spray gun The price for the system with high pressure spray gun is Euro 750 The price for the system without high pressure spray gun is Euro 650 The price for the whole package of 6 units can be: Euro 3.600 Price 750 Euro + VAT, negotiable, FCA and packed Oradea, Romania Please make an offer. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare

Condition: excellent (used), Functionality: fully functional, Stainless steel high conveyor vertical side with deep feed hopper and exit hopper, brand Franz Tölke; impeccable technical and optical condition; conveyor belt with scrapers in perfect condition, power supply 380 V, 50 Hz, Flender Himmel Z30-LK2 with speed reducer gearmotor, power 0,37 kW, 1,370 RPM, nmin = 21,6 1/min, T2 min= 22 Nm, T2max =11,5 Nm. Total height 2,370 mm, wight = 500 mm, length = 1,850 mm Sales price: 2.500 Euro + VAT, negotiable, FCA Oradea, Romania Gijlhcstgxrisdwxst Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana