Maynards Europe GmbH

Condition: used, Year of construction: 2023, Tending system configured for loading two Fanuc RoboDrill machines, available either as-is or can be reconfigured. The system is available due to a cancelled order. ORIGINAL SPECIFICATION (CAN BE RECONFIGURED): ROBOT: - Fanuc M-710iC/70 articulated arm robot, including: - Colour touch screen iPendant - Standard memory - Fanuc HandlingTool software - End-of-arm (EOA) mounted 2D iRVision camera - Payload capacity: 70 kg - Reach: 2,050 mm - Pneumatic grippers designed for die castings with automatic tool changer and EOA-mounted blow-off point SYSTEM: - RoboDrill tending system comprising: - Component infeed and outfeed drawers with part presence sensors - Fixture plates designed for two die-casting variants (approx. dimensions: 320 mm long x 110 mm wide x 50 mm deep) - External status beacons indicating: - Red: Fault condition - Amber: Cell open - Green: Operation finished Gielhccqjwybbierew - Buzzer: Fault condition - Integrated operator control panels, complete with: - Loader ready pushbutton - Continue pushbutton - Reset pushbutton - Integrated operator access panels, complete with: - Access request pushbutton GUARDING: - Powder-coated metal panels to enclose the robot cell, comprising: - Mesh screens forming a complete enclosure around the system (height: 2.2 metres), with interlocked single access door - Interlocked access to all loading shelves - Interlocked front access to RoboDrill machines - Light curtain safeguarding on the rear loading zones - All cables routed through galvanised metal trunking and cable trays - Drip tables for part drainage and improved loading efficiency CONTROLS: - 10” touchscreen HMIs INTEGRATION: - Ethernet IP/discrete I/O integration for customer-supplied parts washer and discharge conveyor

Condition: used, Year of construction: 2023, Fanuc CRX 10iA, hand guidance kit, Fronius package LR ArcTool (YEAR 2023) Fronius TPS 320 I complete with torch, harness & wire feed 1500 x 1000mm black nitrile welding table Diagonal grid clamping system for welding table Small and compact system footprint Designed for easy use and mobility Easy access to Teach Pendant for system operation Lockable wheels for system Table allows for part locator pins Full Training available Gielewya Uhohccqrjw

Condition: used, Year of construction: 1995, MAN D2842LE201 diesel engine, YOM: 1995, MARELLI Generator MJB355 MB4; Generator Output: 650 kVA; Engine Make: MAN; Engine Model: D2842LE201; Engine Power Output: 518 kW; Generator Make: Marelli; Voltage: 440 V; Rated Frequency: 50 Hz; Year of Manufacture: 1995/2001; Serial No.: 5056533 Golswwk E Eehccqreiw

Condition: used, Year of construction: 2005, 3-Axis Machining Center • Manufacturer: Keppler • Type: 000830.08 • Serial number: 240538-01 • Year of manufacture: 2005 • Control system: Siemens Transline 2000HMI Winpro • Machine dimensions: approx. 7,750 x 7,140 mm, height: 3,930 mm • Weight: approx. 12 t • Operating hours (displayed): Drill head 1: 2,875 h Drill head 3: 4,677 h Drill head 4: 4,623 h Total: 19,045 h • Equipped with 4 holders for drill heads, HSK63 tool holder, dual, rotatable workpiece fixture • Handling system with 2 gripper arms • Tool loading and unloading station • Chip conveyor, manufacturer: Ruez, year: 2004, S/N: 2009902-110 • Hydraulic power unit, manufacturer: GKS, type: A4.8554.1-01, S/N: 15464 • Lubrication filter unit, manufacturer: Ruez, type: Filteranlage, S/N: 2009902-10, year: 2004 • Clamping device, workbench with 8 drawers, double-door tool cabinet (mid-height) • Tool presetting unit, manufacturer: Kelch, and various accessories Gielhccqewvixhsrsw

Condition: used, Hydraulic Frame Press • Manufacturer: Dieffenbacher Gslhcjwviv Tecqrsiw • Type plate missing • Estimated press force: approx. 5,000 kN • Table dimensions: approx. 1,000 x 1,000 mm • Approx. 35 years old • Operating hours (read): 2,824

Condition: used, Year of construction: 1987, Hydraulic Frame Press • Manufacturer: ZDAZ • Type: YQM630 Gielhccqswviu Aerow • Serial number: 2448/87 • Year of manufacture: 1987 • Max. ram force: 6,300 kN • Table dimensions: approx. 900 x 1,000 mm

Condition: used, Year of construction: 1984, Drawing and Punching Press • Manufacturer: Umformtechnik Erfurt • Type: BKZe500 (R62SP5) • S/N: 463017 • Year of manufacture: 1984 • Max. ram force: 5,000 kN • Ram stroke: 400 mm • Ram adjustment: 220 mm Golowvipajhccqrsiw • Table dimensions: approx. 1,000 x 1,600 mm

Condition: used, Year of construction: 2013, Oil-Hydraulic Frame Press, manufacturer: Lauffer, type: RA500, S/N: 19828, year: 2013: • Max. press force: 5,000 kN • Max. stroke: 600 mm • Closing speed: 500 mm/s, max. pressing speed: 5 mm/s • Max. working pressure: 255 MPa • Max. tool dimensions: 900 x 900 x 800 mm • Max. tool weight: 2,000 kg Gislhewvigxsccqrjw • Machine weight: 35,000 kg

Condition: used, Year of construction: 2019, Compressed air system, consisting of: • 3 screw compressors, manufacturer: Kaeser: 2 x DSD240 Sigma, year: 2019, 132 kW, max. pressure: 8.5 bar Gislhccqowvicgerew 1 x S/N 10969205/10: Run hours: 38,982, Load hours: 36,329 1 x S/N 10969205/30 1 x DSD205 Sigma, S/N 10969205/20, year: 2019, 110 kW, max. pressure: 8.5 bar, run hours: 3,349, load hours: 2,199 • 3 compressed air dryers, manufacturer: Kaeser: 1 x Secotec TF230, S/N: 2481-7142037, year: 2019 2 x Secotec TF280, S/Ns: 2103-7138644 and 2102-3138636, year: 2019 • 3 air filters, type: F250KE, year: 2019 • 2 oil separators, type: Aquamat CF75, year: 2019 • Control unit, manufacturer: Kaeser, type: Sigma Air Manager 2, plus accessories

Condition: used, Year of construction: 1980, Wheel Disc Press Line, consisting of 4 hydraulic presses: • Press 1: Manufacturer: Umformtechnik Erfurt, type: BKZE1250, Serial No.: 463014, year: 1974, press force: 1,250 MP, drawing depth: 200 mm, ram stroke: 500 mm, adjustment: 215 mm • Press 2: Manufacturer: Umformtechnik Erfurt, type: BKZE800, Serial No.: 463015, year: 1981, press force: 800 MP, ram stroke: 400 mm, adjustment: 185 mm • Press 3: Manufacturer: Umformtechnik Erfurt, type: BKZE800, Serial No.: 3463013, year: 1975, same specifications as Press 2 • Press 4: Manufacturer: Müller Weingarten, type: PSS265, Serial No.: 152242, year: 1989, nominal press force: 7,000 kN, permissible continuous load: 11,000 kN, peak press force: 14,000 kN, ram stroke: min. 150 mm / max. 430 mm, machine weight: 32,000 kg Giolhcewvh R Nscqrew • Plus roller conveyor system and accessories

Condition: used, Year of construction: 2000, Wheel disc production line, consisting of: • Coil uncoiler, manufacturer: Schleicher, type: HES-15-0850, S/N: 10034, year: 2000, max. coil weight: 10,000 kg, width: 120–650 mm, coil Ø: 1,200–2,000 mm • Hydraulic power unit, manufacturer: Schnupp, oil capacity: 400 l • Straightener, manufacturer: Schleicher, type: RSF-08-1277160-0650, S/N: 10034, year: 2000, band width: 120–650 mm, thickness: 5.0–16.0 mm Gelhccowvh I Ijqrsiw • Drawing and punching press, manufacturer: Schirmer + Plate, type: R60HP1600, S/N: 814, press force: 16 MN, table: 1,600 x 1,350 mm, stroke: 750 mm, installation height: 1,150 mm, year: 1979, weight: 16,500 kg • Inclined conveyor, length: approx. 4,000 mm, manufacturer: Mayfran, S/N: P02.97D3481 • 6-axis industrial robot, manufacturer: KUKA, type: KR150-2 2000, S/N: 901287, year: 2005, weight: 1,267 kg • Discharge station, control cabinet, workbench, tool cabinet, and accessories

Condition: used, Year of construction: 1992, Wheel Disc Production Line, consisting of: • Coil Uncoiler, manufacturer: Schleicher, type: HF-180-650, S/N: 4577/1115, year: 1992, max. load: 7.5 t, coil width: 100–600 mm, thickness: 0.8–8.0 mm • Hydraulic Power Unit, manufacturer: Schleicher, type: HP1600, oil capacity: 120 l • Straightening Unit, manufacturer: Schleicher, type: RMSV 6-96/160-650, S/N: 4583/1145, year: 1992, band width: 150–600 mm, thickness: 0.8–8.0 mm • Hydraulic Press, manufacturer: Umformtechnik Erfurt, type: PEZZ400/2000, S/N: 49425, year: 1992, press force: 4,000 kN, slide stroke: 250 mm, slide adjustment: 160 mm • Control Cabinet, manufacturer: Schleicher Gijlhcjwvh Eyjcqrew • Double-door tool cabinet, workbench with 6 drawers, manufacturer: Garant • Discharge conveyor, angled discharge conveyor, and accessories

Condition: used, Year of construction: 1960, Wheel Rim Production Line LMF1, consisting of: • Scissor Lift Table, manufacturer: Büter, load capacity: 6 t • Electric Chain Hoist, manufacturer: Abus, load capacity: 250 kg, year of manufacture: 2022 • Mobile Hydraulic Lifter, manufacturer: Vaculift, type: H-2-150, S/N: 69083, year: 2015, load capacity: 150 kg • 3-Roll Plate Bending Machine, manufacturer: Fero, type: UBBDAH6x650, rolling diameter: 350–1,100 mm, bending width: 200–650 mm, max. bending cross-section: 2,500 mm², sheet thickness up to 6 mm, year: 1965 Gjlhccqswvhz Ijrsiw • Transfer Chain Conveyor, approx. length: 6,000 mm, width: 600 mm, over 40 years old • Hydraulic Press, manufacturer: VEB Wema Zeulenroda, type: PYXEH250S1M, press force: 2,500 kN, over 40 years old • Wheel Rim Welding Machine, manufacturer: Ottensener Eisenwerk, type: AUSK600, S/N: 370215, rated power: 600 kVA, connected load: 1,000 kVA, weight: 22,000 kg, over 30 years old • Transfer Station with Chain Suspension, manufacturer: Abus, older • Weld Seam Deburring Unit for Wheel Rims, manufacturer/type not specified, over 35 years old • Hydraulic Power Unit, oil tank capacity: 430 l • 2 Manual Grinding Stations with integrated extraction • Hydraulic Press, manufacturer: Müller, type: EZ160-10.11.22, year: 1977, for rim expansion • Jib Crane, manufacturer: Abus, jib length: approx. 3,000 mm, with electric chain hoist, load capacity: 250 kg • Wheel Rim Profiling Machines, manufacturer: VEB Getriebewerk Benig, type: Schaltgetriebe, each unit weight: 4,000 kg, 665 rpm, over 40 years old • 4 Hydraulic Power Units, oil volume: 530 l • Rim Stretching Machine, manufacturer: Fero, type: UBXFSK1070X460X135, horizontal press force: 34 MP, vertical press force: 135 MP, slide stroke: 520 mm, rim size: 18" to 42", max. rim width: 450 mm, year: 1963 • Discharge Station • Hydraulic Press, manufacturer: VEB, type: BYXE25S, over 40 years old • Workbench with Overhead Light, Tool Cabinets, and accessories

Condition: used, Year of construction: 1990, Wheel Rim Production Line, manufacturer: Leifeld, type: TF650, comprising: • Sheet Metal Feeding Station, manufacturer: Systematic, type: AW12, year of manufacture: 1991 • 4-Roll Bending Machine with Handling System, type and year of manufacture not specified • Hydraulic Power Unit, manufacturer: Wertenbach, year of manufacture: 1997 • Rim Welding Machine, manufacturer: Ideal, type: AS220AF, S/N: 213023, year of manufacture: 1991 • Rim Weld Seam Deburring Machine, manufacturer: Ideal, type: EV0500, S/N: 213024, year of manufacture: 1991 • Hydraulic Power Unit, tank capacity: 250 l oil • Welding Fume Extraction Unit, manufacturer: Keller, type: Uni-Star-XG, year of manufacture: 1988, S/N: 88/5613 • Rim Expanding and Profiling Machine (for widening rims), manufacturer: Leifeld, approx. 30 years old • Hydraulic Press, manufacturer: Import Russia, type: PYXE25S, max. pressing force: 25 t, over 35 years old • Hydraulic Power Unit • Worktable with Top Light • Drawer Cabinet with 7 drawers, manufacturer: Garant Gislswvhx Tohccqrjw • Laser Printer, manufacturer: Hewlett Packard, type: LaserJet Pro 400 M401DNE • Workstation Terminal with keyboard, mouse, RM barcode scanner, and accessories

Year of construction: 2000, Condition: used, Passenger Car Wheel Rim Production Line, comprising the following components: • Feeding Station, manufacturer: Fontjine, completely overhauled • Conveyor Belt, approx. length 4,000 mm, manufacturer: BTF, year of manufacture: 1989 • Straightening Unit, max. working width 300 mm • 2 Industrial Robots, 6-axis, manufacturer: KUKA, type: KR150-2 2000, further technical data not available • Welding Station, manufacturer: Fontjine, type: FRW302, year of manufacture: 2002, power: 3 x 200 kVA, net weight: 11,000 kg • Weld Seam Deburring and Rolling Unit, manufacturer: Fontjine, type: GWW-29, year of manufacture: 1989, S/N: 096.81.171/2, net weight: 11,500 kg • Hydraulic Power Unit, manufacturer: Rexroth, tank capacity: 570 l • Additional Hydraulic Power Unit, tank capacity: 1,100 l • Industrial Robot, manufacturer: KUKA, type: KR60-3, 6-axis, S/N: 763902, year of manufacture: 2006, net weight: 665 kg Gjlhowvhtqsccqrjiw • Roller Conveyor, approx. length 3,000 mm, older model • Industrial Robot, manufacturer: KUKA, type: KR60-3, 6-axis, further data not available • Rim Expanding Machine (wheel widening), manufacturer: Fontjine, type: Aufrutpresse 40/80H, S/N: 097.81.183, year of manufacture: 1990, net weight: 12,800 kg • Profiling Line, manufacturer: Fontjine, approx. age: 30 years • Industrial Robot, manufacturer: KUKA, type: KR60-3, 6-axis, S/N: 766662, year of manufacture: 2011 • Test and Drawing Press, manufacturer: Georg, type: PKE200S, S/N: 1128/272, year of manufacture: 1971, max. press force: 200 t, machine was completely overhauled by Groß & Schilling Hydraulik GmbH • Hydraulic Power Unit, tank capacity: 5,000 l • Industrial Robot, manufacturer: KUKA, type: KR60-3, S/N: 766964, year of manufacture: 2011, 6-axis • Industrial Robot, manufacturer: KUKA, type: KR60-3, S/N: 766983, year of manufacture: 2011, 6-axis • Double Hydraulic Punching Unit, further technical data not available • Protective Enclosure, Conveyor Belt, approx. length: 15 running meters, working width: approx. 700 mm • 2 Workbenches, control units, and various accessories

Condition: used, Year of construction: 2006, machine/vehicle number: 08-15-1/H-05, 400V 50Hz, 30kW. Gijlhccqswpg Dbjrjw

Condition: used, Year of construction: 2012, Industrial blasting machine made of metal. Cleaned condition with minor signs of use. Accessories: control panel, collection container, replacement filter. Next inspection: 9/2025. Details: | Model: RF 70/2 | Serial No.: 63383 | Power supply: 400 V, 50 Hz | Filter type: Cartridge filter | Cleaning system: Automatic | Control Panel: Integrated with status indicators | Operating hours: 21,532 hours (as specified) Gslhccqswpgzyerjiw

Condition: used, Year of construction: 2014, operating hours: 91,000 h, Functionality: unexamined, Weight: approx. 36,000 kg. Operating hours: 91,891. Including DGS chip conveyor model SSF500-P50 and chip filter RBF1300-500 (2013). Hydraulic system. Hydraulic cooler. Giolhccqowpgx Serew Max spindle speed: 3,500 RPM Axes: 2+1 Control system: Siemens Sinumerik 840D Power supply: 400V 50Hz Tool magazine: 12 Turning and chuck diameter 900 mm Working stroke X1/Z1: 3,050 (2,210) / 700 mm

Condition: used, Year of construction: 2018, Lot consists of: (1) Painting Robot Position consists of: (1) Painting robot Technical Details: Gelhcswnnp Njcqrjiw English: Painting robot with R30-iB controller German: Painting robot with R30-iB Teach Pendant

Condition: used, Year of construction: 2007, Lot consists of: (1) Painting Robot Gielhccownnpcoqrsw Position consists of: (1) Painting robot Technical Details: English: Painting robot with R30-iA controller German: Painting robot with R30-iA Teach Pendant

Condition: used, Year of construction: 2018, Lot consists of: (1) Industrial Robot Position consists of: Gislhcswnnn Eocqrew (1) Robot Technical Details: English: Painting robot with R30-iB controller German: Painting robot with R30-iB Teach Pendant

Condition: used, Lot consists of: Gjlhjwnbqmsccqrsiw (1) Mixer, (1) 550 kW 3-Phase Motor Technical Details: Without control program

Condition: used, Lot consists of: (3) Weighing systems for bulk material Gielhownbppjccqrjw Position consists of: (3) Weighing systems for bulk material

Condition: used, Lot consists of: (3) Vacuum unloading stations Position consists of: Giolhjwnbdajccqrow (3) vacuum unloading stations Technical Details: English: Without control program German: Without control program

Condition: used, Lot consists of: (14) 70-Tonne Aluminium Silos Position consists of: (14) 70-ton aluminum silos Technical Details: English: used for Carbon black. Will be rinsed. Gsljwnbbfohccqrsiw German: Used for carbon black. Will be cleaned.