Used Deephole boring machines for sale (69)

Condition: used, Year of construction: 1999, fabric-no. 23989 total power requirement 8,8 kW Celn Tqevxltnsn Eegt weight of the machine ca. 9,1 t

Condition: excellent (used), Year of construction: 2008, The deep hole drilling machine is in a very good condition! Deep hole drilling machine type TBM 120-2000 Drilling system BTA Drilling range full drilling 30-130 mm Colnehwhx Hj Tqn Eegt Max. boring 200 mm Max. drilling depth 2000 mm Drill spindle box with two-stage gear, electrically switchable. Optional rotating / stationary tool Main spindle box (tailstock) with two-stage gear, electrically switchable Tailstock with counter-rotation Optionally with or without counter-rotation Hydraulic jaw chuck On request we will be happy to send you more pictures.

Year of construction: 2018, Condition: as good as new (ex-display), Number of spindles 1 full drilling 5-40 mm Drilling depth 1.000 mm Cgoln Tod S Ualeqn Est

Condition: used, Year of construction: 1993, Control Sinumerik 805 turning speeds 45 - 6000 U/min Solid drill diameter / 0 weight of the machine ca. 20 t Type of machine: deep hole drilling machine Model / Type: TB 2 15 30001KT Year of construction: 1993 Manufacturer: hole Machine number: 221-3000-2093 Machine weight: approx. 20,000 kg Machine footprint: Width = approx. 3800mm Length = approx. 13500mm Height = approx. 3100mm Drilling length: approx. 3500mm Drilling capacity: drill 45mm / drill out 80mm Spindle speed range: 45 - 6000 rpm Control: Siemens Sinumerik 805 Hamül – coordinate table Type: KT 8.5 – 10.10 Clamping surface: approx. 1100 mm x 980 mm Travel: Y - axis: approx. 800mm Traverse path X - axis: approx. 500mm 7 pieces clamping - T - grooves: 18 mm Special equipment: 1 piece Fibroplan NC - rotary indexing table Type: NC 1.05 Permissible transport load in horizontal use 2500 kg With manual chuck Forkardt F 630 The NC rotary indexing table can be adjusted manually in the longitudinal and transverse directions relative to the clamping table and is clamped hydraulically. 1 piece chips - centrifuge Type: VZ5A from CEPA Drum capacity: 80 liters Loading weight max. 100 kg Drum - Ø: 600 mm Speed: 1000 rpm 1 additional pump for large drill Ø 1 piece Bosch radial piston pump no.: Suitable for lip drills (internal cooling, chips run outwards) Suitable for BTA drills with screw-on heads (internal cooling, chips run Coln Tqnovvx His Esgt inwards)

Condition: used, Year of construction: 1970, table width: 220 mm, total width: 700 mm, total length: 960 mm, total height: 1,400 mm, table length: 900 mm, rotational speed (min.): 320 rpm, rotational speed (max.): 1,600 rpm, overall weight: 300 kg, Article number MA1174 Manufacturer IXION Type BT15G Year of manufacture approx. 1970 Machine number 97963 Length [mm] 960 Width [mm] 700 Height [mm] 1400 Weight [kg] 300 Connection power 380 V Number of tool stations [pcs.] 3 Gearbox [rpm] 320- 1600 Table size [LxW] 900 X 220 Mounting MK 2 Left/right rotation Automatic threading of all 3 drilling units M3 - M10 ST 60. / M3 - M16 GG Accessories Drilling units Height adjustable Cgjlnovutwme Tqn Eet

Year of construction: 2006, Condition: good (used), CNC control Sinumerik 840D diameter of the face plate 1200mm Cjljggblgjn Tqn Ejgt steady rest chip conveyor Technische Daten / technical details: Umlaufdurchmesser über Bett / rotary diameter over bed 1000 mm Umlaufdurchmesser in Rollenbock / rotary diameter at steady rest 900 mm Max. Bohrtiefe / max. drilling depth 8850 mm max. Bohdurchmesser / max. drilling diameter 326mm Spanndurchmesser Planscheibe / clamping diameter at face plate 900 mm Drehzahlbereich / spindle speed 1-300 U/min Vorschubbereich / infeed 0,5-4500 mm/min Antriebsleistung / drive capacity 129 kW Werkstückabmessungen: / workpiece measures Min. Aussendurchmesser / min. outer diameter 150 mm Max. Aussendurchmesser / max. outer diameter 900 mm Max. Werkstücklänge / max. workpiece lenght 8000 mm Maschinengewicht / weight of machine 47000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: not inspected (used), Year of construction: 1970, - Drilling diameter 5-30 mm - Drilling depth 750 mm - Filter - Pump Cjln Tqnoxzz Hs Ejgt

Condition: good (used), Year of construction: 1979, Siemens TP 177 A control unit Speed 100-4000 1/min Max. Bore diameter D 32 mm Coljt Dda Ton Tqn Eogt Max. Drill length 1100 mm Max. Workpiece length 650 mm Rotationally symmetrical parts D 10- 136 mm Magnetic belt conveyor Coolant system

Year of construction: 2023, Condition: new, Technical specs CNC – 800 Control Syntec Drive system YASKAWA servo drive Main motor 7,5 Kw Spindle speed till 7000 Rpm Max drilling dept 800 mm Drilling diameter 2,5 till 30 mm X stroke 800 mm Y stroke 800 mm Z stroke 800 mm cutting feed 300 mm/min spindle speed 7000 Rpm spindle motor Servo 11 Kw X servo motor 3,9 Kw Y servo motor 3,9 Kw Z servo motor 3,1 Kw oil pump motor 5,5 Kw oil pressure 21 bar table loade 6000 kg machine weight 8,3 ton machine power 34 Kw. Cgjlnjk N Dtus Tqn Eet Machine size 4,2 x 3,5 x 2.6 meter installation on request. price free on truck.

Condition: used, Year of construction: 2004, Solid drill diameter 200 mm bore depth / mm number of spindles / Technical specifications Power: 129kW Control: Siemens NC control Speed ??range (stepless): 2 - 300 rpm Feed range (in steps): 3 - 4500 mm / min Oil system capacity: 20,000 liters Maximum flow rate: 1500 l / min Circumferential diameter in bezel: 1100mm Circumferential diameter over bed: 1250mm Distance between centers: 11000mm Clamping diameter faceplate: up to 1100mm Max. Workpiece weight with a stick: 10t Clamping range of the two steady rests: 150 - 1100mm Clamping range BOZA: 1 = 200 - 400mm 2 = 400 - 800mm dimension Min. Outside diameter: 406 mm Max. Outside diameter: 850mm Wall thickness: 10 .... 150mm Max. Workpiece length: 11000mm Max. Workpiece weight: 10 t Max. Strength: 800 N / mm² Specific cutting resistance (Ks): 2000 .... 2100 N / mm² Machine data Machine length: 28,800mm Center height: 560mm Circumferential diameter over bed: 1120mm Full drilling diameter: 200mm Core drill diameter: 350mm Boring diameter without drilling: 350mm Boring diameter with tapping: 350mm Headstock: Main drive motor: Siemens Type: 1 PH 7228 Performance data at 1,000 rpm: 113 kW / 1,079 Nm Cgoln Tjuddimoqn Est Performance data at 1,150 rpm: 129 kW / 1,017 Nm Main transmission: Z-F manual transmission Type: 2 K210 Switchable gear ratios: i = 1: 1 i = 1: 4 Fixed gear stage headstock: i = 11.68 Max. Torque: 50,000 Nm Speed ??range I: 2 ... 300 min Speed ??range II: 2 ... 75 min

Condition: used, Year of construction: 1970, machine/vehicle number: 100267, total length: 960 mm, total width: 700 mm, total height: 1,400 mm, overall weight: 300 kg, rotational speed (min.): 1,600 rpm, table length: 900 mm, table width: 220 mm, Article number MA1174 Manufacturer IXION Type BT15G Cgoln Tqjvutwajn Est Year of manufacture approx. 1970 Machine number 100267 Length [mm] 960 Width [mm] 700 Height [mm] 1400 Weight [kg] 300 Connection power 380 V Number of tool stations [pcs.] 3 Gearbox [rpm] 320- 1600 Table size [LxW] 900 X 220 Mounting MK 2 Left/right rotation Automatic threading of all 3 drilling units M3 - M10 ST 60. / M3 - M16 GG Accessories Drilling units Height adjustable

Condition: new, Year of construction: 2015, Functionality: fully functional, machine/vehicle number: 15VWL1032, The machine includes fixtures for the production of electrical couplings in the following range: 250 - 800 mm SDR11 355 - 1200 mm SDR17 900 - 1200 mm SDR26 Original MSA drawings are also included. The VWL 1200 is a CNC controlled vertical three-axis electric pipe laying machine designed for laying medium to large fittings or pipes. The machine can produce fittings typically in the 250 to 1400 mm internal diameter range (1400 mm SDR17). An optional 2-axis CNC drilling unit is available for drilling fusion indicators during the wire laying cycle or for drilling end holes during the external profiling cycle. Cgoln Tqneu Itk Ro Est The VWL 1200 uses special fixtures that clamp onto an innovative feature that is integral to the coupling design, so that there is a separate fusion zone in each half of the coupling. The process of laying the wire starts at one clamp at the end of the coupling. The wire is inserted with twice the required pitch at the end of the fusion zone, whereupon the tool system rotates and then moves in the opposite direction between the first laid pitch until it reaches the resting position at the second clamp. The process is completed at the second part of the coupling. The VWL 1200 system is designed to allow the loading and unloading of larger couplings (which can weigh up to approximately 300 kg even before the wire is inserted). The machine has a completely open top, which allows easy loading overhead using a gantry system. Alternatively, parts can be loaded through the extra wide operator's door using suitable gripping and handling equipment.

Condition: good (used), Year of construction: 1980, Functionality: fully functional, WOHLENBERG B1000x7 DEEP HOLE DRILLING MACHINE (GUN DRILL) Outer clamping diameter = 1000 mm; Celn Tqnouuh Ngj Ejgt Overall size: L=23000mm,l=3000 mm, H=2400 mm; Accessory - Honning Head

Condition: repair required (used), Year of construction: 1996, For sale is an IXION TL 601 cycle deep hole drilling machine Unfortunately, the machine now has electrical problems Constants would have to be reloaded by a technician and the buffer battery would have to be replaced Display NEW LED Machine no. 950192 Year of manufacture 1996 Manufacturer Maschinenfabrik IXION Otto Hafner -Travels + Quill Tl 601 (Z) 600 mm +Drilling unit vertical (Y) 300 mm + Transverse table (table surface 1200 mm x 600 mm) (X) 700 mm + In drilling direction (W) 1000 mm -Clamping table + Table surface (standard) 1200 mm x 600 mm + Table load (T1200) 1000 kg -Tool holder +SK 40 holder according to DIN +Tightening bolt 69871 According to DIN 69872 -AC main spindle drive 3.0 kW +At 100% ED, S1 5.5 kW At 50% ED, S6 7.5 kW +Spindle speed Directly programmable 100-4000 1/min Working capacity: +Drilling capacity in steel 2312 D 32 mm +Thread cutting M24 -Weight / Dimensions Weight 2500 kg Length approx. 4230 mm Width approx. 1885 mm Height approx. 1870 mm Cgsln Tqnoh Dpv Rj Ejt All prices plus VAT We can deliver and commission the machine All prices plus VAT Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours?

Condition: good (used), -Drill through fair 5-30 mm - depth 750 ~ 900 mm - conversion to customer specification Cgeln Tqno Dcz Do Eet

Condition: good (used), Bench drill, stand drill, pillar drill, pillar drill -Manufacturer: Flott, bench drill type M2 ST -Clamping table: 260 x 200 mm -Travel: 310 mm -Spindle holder: MK2 with drill chuck 3-16 mm -Projection: 240 mm -Speeds: 400 - 3500 rpm Cjljmzkg Rsn Tqn Eogt -Pillar: diameter 82 mm -Spindle stroke: 100 mm, depth stroke with fine adjustment -Motor power: 0.75 kW -Voltage: 400V -Dimensions: 750/340/H1100 mm -Weight: 135 kg

Condition: good (used), Year of construction: 2004, TBT ML 200-2-800 deep hole drilling machine TECHNICAL DATA Type: ML 200-2-800 Year of construction: 2004 Control: Simatic OP17 Number of spindles: 2 Spindle distance: 12 mm Drilling slide stroke: 800 mm Drilling range: 1 - 10 mm Process: Single-lip drill Drilling depth: Immersion spindle: 110 mm Seal housing: 430 mm Sealing housing with steady rest: 400 mm Spindle drive: Power: 1.7 / 2.9 / 1.3 Celn Tqjvcbg Son Eegt Voltage: 240 / 350 / 350 V Frequency: 100 - 800 Hz Weight: Approx. 2.6 T We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, IMSA MF 1600S deep hole drilling and milling machine Year of construction: 2018 Travel distances Maximum drilling depth in one pass V-axis 1,600 mm Table transverse movement X-axis 3,000 mm Drilling slide vertical movement Y-axis 1,600 mm Approach to workpiece / milling axis Z-axis stroke 1,500 mm Tilting axis deep drilling/milling unit (angular resolution 0.001°) A-axis +30°/-15° Table rotation ( angular resolution 0.001° ) B-axis 360° Feed, adjustable speed max. 10.000 mm/min Cgeln Tjulk Dzoqn Eot SK50 deep drilling/milling spindle Optimum drilling diameter in solid material 5-25mm Max. Drilling diameter with pilot hole or in short-chipping materials up to 40 mm Adjustable spindle speed 1 - 4,500 rpm Motor rating of the drill spindle 17.0 8 (S1) kW Spindle torque 324 Nm Standard drilling tool holder diameter 25 70 mm Max. Oil pressure through the spindle 120 bar Tool holder SK 50 DIN 69871/A Liquid cooling YES Turntable Dimensions 1,600 x 1,800mm Table rotation B-axis 360 table load ( under rotation ) 20.000 kg Standard T-slots 22 mm Dimensions and weight 7,000 x 7,900 x 4,700 mm Weight: 47,000 kg Current Total power consumption 74.98 kW

Condition: excellent (used), Drilling capacity -16mm MK2 Spindle taper Drilling depth max. 485mm table 590 x 350 mm, 360° turnable Misc. Accessories Marcels Maschinen AG Cgsln Tqnjq Dlznj Est

Condition: used, Year of construction: 1999, Machine bed deep hole drilling machine M 500-6-1200 with superstructure and spindles Colovha T Uen Tqn Eegt TBT Used Suitable for retrofit or general overhaul.

Year of construction: 1979, Condition: good (used), TBT T30-4-750/1000 -drilling diameter ~30 -drilling depth 750/extension ~1000 -Tank Cgjln Tqned Ri H Eo Est -Pumps -loading equipment -Tailstock

Year of construction: 1986, Condition: used, Bench drill, bench drill, column drill, pillar drill Csljg D H A Ren Tqn Ejgt -Manufacturer: Flott, bench drill type TB 13 St -Clamping table: 225 x 295 mm -Spindle mount: with drill chuck -Projection: 185 mm -Speeds: 400-5000 rpm -Column: diameter 60 mm -Spindle stroke: 60 mm, depth stroke with fine adjustment -Motor power: 0.5 kW -Voltage: 220V -Dimensions: 380/225 / H745 mm -Weight: 50 kg

Condition: good (used), Year of construction: 1997, TBT ML 200-2-850 deep hole drilling machine TECHNICAL DATA Type: M200-2-850 Number of spindles: 2 Drill carriage stroke: 850 mm Drilling method: Single-lip drilling Drilling depth with: Submersible spindle: 120 mm Sealing housing: 400 mm Sealing housing with bezel: 350 mm Spindle drive Power: 2 / 3.5 / 1.5 kW Voltage: 140 / 350 / 350 V Speed: 14 / 11 / 6 / A Feed - own drive Feed speed: 20 - 500 mm/min Rapid traverse speed NC operation: 12 m/min Cjljvca Rcjn Tqn Esgt Feed force: 1.5 kN Motor power: 2.2 Nm at 3000 rpm Clamping tailstock Motor power: 0.75 kW at 1000 rpm Spindle speed: 500 rpm Stroke max: 200 mm Main dimensions L x W x H: 4600 x 2500 x 2100 mm Transport weight: 3200 kg Control: Sinumerik 805 M No liability is assumed for the correctness, completeness and up-to-dateness of the information provided

Condition: used, Bench drill, stand drill, pillar drill, pillar drill -Manufacturer: WMW Heckert, bench drill type BT 12/1 with base -Clamping table: 340 x 280 mm -Travel: 370 mm -Spindle mount: MK2 -Projection: 215 mm -Speeds: 224/450/900/1800 rpm -Column: diameter 92 mm Celn Tqnoir E Sns Eegt -Spindle stroke: 100 mm -Motor: VEB 0.4/0.7 kW with brake -Voltage: 380V -Dimensions: 620/480/H1710 mm -Total weight: approx. 182 kg

Year of construction: 2003, Condition: used, Bench drill, stand drill, pillar drill, pillar drill -Manufacturer: Ixion, bench drill type BT13ST -Clamping table: 170 x 170 mm -Travel: 210 mm -Spindle holder: drill chuck B16 -Projection: 180 mm -Speeds: 420 - 2100 rpm stepless -Pillar: diameter 65 mm -Spindle stroke: 70 mm, with fine stop -Motor: AEG 0.7/1.0 kW -Voltage: 380V -Dimensions: 620/235/H800 mm Coln Tek Tuwveqn Esgt -Weight: 70kg