Used Graule for sale (71)

Condition: good (used), Year of construction: 1982, Cut-off and miter saw, pull saw, chop saw, panel saw, miter and compound miter saw, radial saw, cut-off, miter and compound miter circular saw, radial arm saw Ksdpfx Aoyam Uasd Nswt -Manufacturer: Graule cut-off and miter saw type ZS135 -Motor power: 2.2 kW -Speed: rpm -Saw blade: Ø 420 mm, swiveling -Cutting area: 90° flat 375 x H170 mm -Cutting range: 45° 260 x 170 mm / 365 x 120 mm -Transport dimensions: 1060/835/H1530 mm -Weight: 185 kg

Condition: good (used), saw blade diameter: 360 mm, Sliding saw / Mitre saw / Chop saw / Radial saw Kwsdoyckbiepfx Ad Net Wegoma zs 135 Mitre saw type ZS135 -Motor power: 2.2 kW -Saw blade: Ø 360 mm, swiveling

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: ZS 200 N / 2014/53/40, saw blade diameter: 520 mm, cutting height (max.): 200 mm, rotational speed (min.): 2,800 rpm, cutting length (max.): 420 mm, length stop: 7,000 mm, For sale: GRAULE ZS 200 N crosscut and mitre circular saw, equipped with control panel, motorized swivel and tilt adjustment, including roller conveyors (7000 mm and 4000 mm) with manual stop (with sight glass), as well as a chip extraction unit. The machine has been regularly maintained by a specialist company and is in very good condition. Kedpfx Aoyannzjd Njwt

Condition: new, saw blade diameter 350 x Ø 30/40 mm cutting diameter 135 mm cutting length 430 mm dimensions of saw-blade 350x3,0/2,4x40 mm turning speeds 3800 U/min Dust suction hood 100 mm total power requirement 3,0 kW weight of the machine ca. 100 kg dimensions of the machine ca. 1300 x 800 x 1600 mm - Crosscut and miter saws for crosscuts - Miter adjustment on both sides (60° / 45°), with fixed stop - Compound cut on one side up to 45°, with fixed stop - Stable cast iron construction - Precise ball bearing guidance of the tool slide hardened and welded steel shafts - manual saw feed Kwsdoxabqzjpfx Ad Nst - Saw blade infinitely adjustable in height - socket for opt. suction Cutting data : - Cutting length at 90° = 430 mm - Cutting height at 90° = 135 mm - Cutting length at 45° = 310 mm - Cutting height at 45° = 92 mm Special accessories included: - 1x HM circular saw blade 350 x 3.0/2.4 x 40 mm Z = 108 FTZ neg. for aluminum and plastic - Hydraulic feed brake, continuously adjustable - Pneumatic material clamping from above consisting of: 2x vertical clamping cylinders, adjustable with hand levervalve - 1x machine stand - more powerful drive motor (3.0 kW)

Condition: new, saw blade diameter 520 x Ø 50 mm cutting diameter 200 mm cutting length 420 mm Cutting height at 45° 140 mm dimensions of saw-blade 520x3,6/3,0x50 mm turning speeds 2800 U/min Dust suction hood 100 mm total power requirement 3,0 kW weight of the machine ca. 310 kg. range L-W-H 1400 x 900 x 1650 mm - Crosscut and miter saws for crosscuts - Miter adjustment on both sides (60°/45°), with fixed stops - Shift cut on both sides (60°/45°), with fixed stops - Stable cast iron construction - Precise ball bearing guidance of the tool slide hardened and welded steel shafts - manual saw feed - Saw blade infinitely adjustable in height - socket for opt. suction Furnishing : - 3.0 kW motor for ALU cuttings Kwsdpfxjxaaxds Ad Net - Saw blade can be tilted via handwheel and worm gear (shift cut) - Saw blade diameter 520 mm - Saw blade mounting hole 50 mm - Saw blade speed 2,800 rpm - 400 Volt / 3 kW (S6/40%) motor with brake and automatic. Star-delta motor circuit - Machine weight approx. 250 kg Cutting data : - Cutting length at 90° = 420 mm - Cutting height at 90° = 200 mm - Cutting length at 45° = 295 mm - Cutting height at 45° = 140 mm Special accessories included: - HM saw blade 520x3.6/3.0x50 mm - Hydraulic feed brake, continuously adjustable - Pneumatic material clamping from above best. from : 2 vertical clamping cylinders adjustable with lever valve - pneumaschine saw blade spray device - Machine can be tilted from the front on both sides using a hand crank - Machine stand

Condition: new, saw blade diameter 420 x Ø 40 mm cutting diameter 170 mm cutting length 410 mm dimensions of saw-blade 420x3,2/2,4x40 mm turning speeds 3500 U/min Dust suction hood 100 mm total power requirement 3,0 kW weight of the machine ca. 120 kg dimensions of the machine ca. 1300 x 800 x 1600 mm - Cross-cut and miter saws for cross-cut cuts - Miter adjustment on both sides (60 ° / 45 °), with fixed stop - Shifter cut on both sides 45 °, with fixed stop - Stable cast iron construction - Precise linear bushing guide on the tool slide hardened and ground steel shafts - manual saw feed - Saw blade infinitely adjustable in height - nozzle for opt. Suction Cutting data: - Cutting length at 90 ° = 410 mm - Cutting height at 90 ° = 170 mm - Cutting length at 45 ° = 290 mm - Cutting height at 45 ° = 115 mm Special accessories included: - Adjustment of shifter cut via hand crank, both. adjustable (45 ° / 45 °) - HM circular saw blade 420x3.2 / 2.6x40 mm Kjdjxabztopfx Ad Newt Z = 108 FTZ neg. For aluminum and plastic - hydraulic feed brake, infinitely adjustable - pneumatic material clamping from above consisting of: 2 vertical clamping cylinders, adjustable, with hand lever valve - machine stand

Condition: new, Year of construction: 2026, machine/vehicle number: diverse, The professional for cutting to length, miter and bevel cuts The ZS 200 N is ideally suited for cutting to length, mitre and bevel cuts. Materials such as wood, PVC and aluminum profiles can be cut cleanly and precisely. The saw unit runs on a hardened guide arm and can be tilted horizontally on both sides for miter cuts. The N stands for tilt and means that the saw unit can also be tilted vertically to the side, making it easy to carry out rip cuts. Fact check ZS 200 N Crosscut and mitre circular saw with a maximum cutting height of 200 mm Sturdy cast iron construction precise ball bushing guide of the tool carriage on hardened and ground steel shafts manual saw feed fast miter adjustment up to 65° horizontal and up to 60° vertical Adjustable fixed stops Lower saw blade guard Can be connected to extraction system Machine can be tilted on both sides from the front Hydraulic feed brake Technical details: Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Mitre range horizontal 45°-90°-25° Vertical mitre range 60°-90°-30° Saw blade Ø 520 mm Weight 310 kg Scope of delivery: Kedpfx Ash Nu Iusd Njwt ZS 200 N cross-cut and shifter saw Machine stand Machine can be tilted from the front on both sides Hydraulic feed brake HM Z 60 neg. circular saw blade Operating tool and hand crank

Condition: new, Year of construction: 2026, Mobile chop station with extremely robust base, ready assembled and ready for use. Included special equipment: - Machine tiltable on both sides from the front - Circular saw blade HM 520x50 Z60 W neg. - Undercarriage mobile, especially stable Data of the machine: - especially due to constant zero point good when using measuring equipment and stop systems (miter and tilt!) - Powerful three-phase motor 5 kW with automatic Star-delta starting - stable guide arm with 4 ball bushings for precise and safe preference - swiveling left 45 ° (miter) - swiveling right 65 ° (miter) - Tilt left 60 °, right 30 ° - Cutting width at 90 ° 420 mm - Cutting width for miter 45 ° 295 mm Kjdsb Nrg Uspfx Ad Newt - Cutting height vertical 200 mm - Cutting height at inclination 45 ° 140 mm - Cutting height at inclination 60 ° 80 mm - for saw blade 520x50 mm - Suction nozzle 100 mm - Weight with stand 300 kg - CE and GS signs. dust tested - German quality product Data base: Extremely stable frame construction from large dimensioned profiles, powder-coated, sturdy steel carrying rollers with ball bearing high wall thickness galv. galvanized, sustainable Double-stop swivel castors with PU tread, easy to move Roll width 450 mm Conditions about threaded spindles adjustable 1500 mm roller conveyor per side 2750 mm stop length per side Total length 5990 mm Stiff profile heavily ribbed 100x50 mm Anodised aluminum (extendable as option) 1 hinged stop right and left Measuring tape right and left

Condition: excellent (used), functionality: fully functional, tool diameter: 450 mm, rotational speed (min.): 2,800 rpm, rotational speed (max.): 2,800 rpm, overall weight: 400 kg, cutting height (max.): 153 mm, saw blade speed: 2,800 rpm, mount diameter: 40 mm, power: 0.003 kW (0.00 HP), Equipment: rotational speed infinitely variable, Facade saw GRAULE type AS 450 Kwjdpfx Adothdrwo Nst Transport 300 EUR Motors 2x 400 V/3.0 kW Rotational speed 2800 rpm Vertical saw blade diameter 450 mm Horizontal saw blade diameter 400 mm Blade mounting diameter 40 mm Cutting height 153 mm Cutting depth 110 mm Cutting width 250 mm

Condition: used, Milling cutter diameter 250 mm Max. Frästiefe: 80 mm Milling width: 330 mm Pneumatic workpiece clamps Manual feed Weight: approx. 160 kg Kwsdpfxsx Rbz Dj Ad Nst

Condition: like new (used), Year of construction: 2008, operating hours: 20 h, functionality: fully functional, Graule ZS 170 saw, year 1996, EUR 2,200 Kwodpfx Adjwp Stzo Nst Graule 6/250 - 160 milling machine, year 2008, EUR 2,900 Rotary storage rack for sashes and frames, EUR 500 7.5 m roller conveyor as a buffer storage for windows before the glazing station, EUR 600

Condition: new, Year of construction: 2026, crosscut and mitre circular saw with maximum cutting height of 170 mm solid cast iron construction precise ball-bearing guide of the tool slide on hardened and ground steel shafts manual saw feed fast mitre adjustment up to 65° horizontal readjustable fixed stops lower saw blade protection connectable to suction unit Modell-----Motor-----Drehzahl-----Schnittlaenge ZS 170: 400 V / 2,0 KW--3500 rpm---410 mm (at 90 degrees) Model-----Cutting height----Horizontal mitre range Kwedpfx Ajcnz N Hed Nst ZS 170 ----- 170 mm----- 45 degrees -90 degrees Modell----- Saegeblatt-----Absaugstutzen-----Gewicht ZS 170 -----420 mm----- 100 mm ----- 120 kg Accessories on request: Roller conveyor / length gantries type RO, RL, RLK, RLH and RLHK for machining aluminium and PVC profiles and for wood profile board machining. the modular roller conveyor system can be supplied as: 3 m type RO: infeed roller conveyor with min. 2 support feet 3 m type RLK: roller conveyor length stop with backwards folding stop slide - machine stand - Main switch lockable - Feed roller conveyor Ro-St60 3 meter right side - roller conveyor RLK-ST60 L 3,0 meter measuring length Length stop/roller conveyor heavy version mm - scale at the rear beam, caliper gauge with magnifying glass and stop flap - Saw blade 420 x 3,5 x 40 Z 84 Neg Location: ex stock 54634 Bitburg - free on truck - - immediately available- Location: Ex stock 54634 Bitburg - free on truck - - immediately available-

Condition: new, Year of construction: 2026, Product detail Crosscut and mitre circular saws Type ZS 200NF Crosscut and mitre circular saw with maximum cutting height of 200mm solid cast iron construction precise ball-bearing guide of the tool slide on hardened and ground steel shafts Kwedpfx Adocnz Rvj Nst manual saw feed fast mitre adjustment up to 65° horizontal and 60° vertical readjustable fixed stops lower saw blade protection connectable to suction unit machine mounted on mobile machine base with 1,5 mtr. long roller conveyors left and right side left side with scale and stop slide technical data Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Mitre range horizontal 45°- 90°- 25° Mitre range vertical 60°- 90°- 30° Saw blade Ø 520 mm ( not included in standard ) Suction nozzle 100 mm Weight 490 kg Location: Ex stock 54634 Bitburg - Immediately available - On request we can also offer you the saw blade.

Condition: new, Year of construction: 2026, crosscut and miter saw type: ZS 200 N - 5 KW motor with machine stand, but without saw blade Machine via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake u. Automat. Star delta motor control cutting width at 90deg: 420 mm cutting width at 45deg: swivelled: 295 mm Cutting height at 90deg: 200 mm Cutting height at 45deg tilted: 140 mm Ksdpfxsi Dfido Ad Nowt Saw can be tilted on one side up to approx. 25 degrees to acute angles and tilted flat to the left up to 30 degrees Machine stitched: approx. 250 kg Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Cut-to-length and mitre saw type: ZS 200 N - 5 KW motor with machine stand, Machine via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake and automat. Star delta motor control Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: swiveled: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees inclined: 140 mm Saw can be swiveled on one side up to approx. 25 degrees to an acute angle and tilted flat to the left up to 30 degrees Carbide circular saw blade 520x4.0/2.8 x 50 mm 60 WZ neg. for wood Kwodpek H Ic Usfx Ad Njt RLH-ST60 6.0 mtr. measuring length, mounting side: left Cross-cut fence / roller conveyor, heavy-duty design, Stop slide adjustable from the workstation via handwheel, electronic-digital dimension display, pneumatic clamping of stop slider, stop flap folds backwards, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connection piece: overall length: 6.7 mtr. Surcharge for digital electronic display unit type: FIAMA EP6 for 230 V mains operation, with electric on/off switch and socket. Powerful dark red LED display. Higher accuracy than the battery-powered crystal display RO-ST60 4.0 m long feed roller conveyor Mounting side: Right Heavy-duty design, steel rollers: 60 mm Diameter, roller spacing: 200 mm 400 mm roller width, 3 support feet and connection piece Location: From stock 54634 Bitburg - immediately available - Picture: similar. Machine is still in original packaging

Condition: new, Year of construction: 2026, Crosscut and Mitre Circular Saws Type ZS 200NF Crosscut and mitre circular saw with a maximum cutting height of 200 mm Robust grey cast iron construction Precise ball bushing guidance of the tool carriage on hardened and ground steel shafts Manual saw feed Quick mitre adjustment up to 65° horizontally and 60° vertically Adjustable fixed stops Lower saw blade guard connectable to extraction system Machine mounted on mobile machine base with 1.5 m long roller conveyors on both sides (left and right) Left side equipped with scale and stop slider Technical Data Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Mitre range horizontal Kwodpfx Asw Hl Aqsd Net 45°- 90°- 25° Mitre range vertical 60°- 90°- 30° Saw blade Ø 520 mm (not included as standard) Extraction port 100 mm Weight 490 kg Location: In stock at 54634 Bitburg - Immediately available - On request, we are happy to offer the saw blade as well.

Condition: new, Year of construction: 2026, functionality: fully functional, 5 kW, 7.5 HP, mobile on sturdy swivel casters Cutting height 200 mm, Cutting height at 45°: 140 mm Tiltable to the left up to 60° Tiltable to the right up to 45° Cutting length 420 mm at 90° position Cutting length at 45° tilted: 300 mm Tiltable to the left 60°, tiltable to the right 30°, adjustable by handwheel from the rear (optionally also from the front) 1 piece saw blade 520 x 4.4 x 50 mm, 60 TCT teeth, negative rake Left roller conveyor with scale and stop slider, length 2000 mm up to the saw blade Machine length 4000 mm 1 piece roller conveyor extension with scale and second stop slider, mounting side left, length 4000 mm. This extension roller conveyor includes a pull-out measuring bar with stop, enabling precise cutting of timber on the left side to a length of up to 7500 mm Kedpfxodxxado Ad Newt 1 piece infeed roller conveyor, mounting side right, length up to saw blade 2000 mm Options: pneumatic material clamping, laser cutting guide

Condition: new, Year of construction: 2026, functionality: fully functional, nominal power: 5 kW (6.80 HP), 5 kW 7.5 HP Cutting height 200 mm Kjdpfx Adjdxw U Is Nowt Tiltable up to 60° to the left, up to 30° to the right using a hand crank from the front Cutting height when tilted at 45°: 140 mm Cutting width 420 mm; cutting width when swiveled at 45°: 290 mm Swivable up to 60° to the left, up to 45° to the right Incl. saw blade for wood 6,000 mm heavy-duty crosscut roller conveyor, mounted on the left, stop-slider adjustable from the machine with handwheel, pneumatically lockable, length digitally readable, digital display in 230V version 4,000 mm heavy-duty infeed roller conveyor, mounted on the right Machine tiltable on both sides from the front using hand crank and worm gear Various options available on request, e.g. greater cutting height, material clamping, laser cutting guide

Condition: new, Year of construction: 2025, functionality: fully functional, Technical Data: Cutting height: 200 mm Cutting height at 45° incline: 140 mm Tiltable to the left up to 67° Tiltable to the right up to 45° 5 kW hydraulic feed brake (optional) Cutting length: 420 mm at 90° position Cutting length at 45° swivel: 295 mm Tilt angle: left 60°, right 30° Tilt adjustment from the front via hand crank. 1 wood saw blade, diameter 520 mm 1 heavy-duty cross-cut roller conveyor, length 6,000 mm, mounted on the left. The stop is adjusted from the front via handwheel. Length is digitally readable to the millimeter. The stop is pneumatically locked. 1 digital readout (230 V version) 1 heavy-duty feed roller conveyor, right side, length 4,000 mm Machine length: 11,700 mm Fully mobile Machine packed on wooden planks Images show a customer’s machine. Ksdpfx Asn R A Ewjd Njwt Available upon request also with 215 mm or 240 mm cutting height.

Condition: new, Year of construction: 2026, functionality: fully functional, Gehrungs-Kapp u. Schiftersäge Graule ZS 170 N Baujahr 2025 3 KW Kjdpecyd N Hofx Ad Nowt links u. rechts schwenkbar 60° u. 45° links neigbar bis 45°, nach rechts bis 25° mittels Handkurbel von hinten 1 Maschinenständer 1 Sägeblatt 6000mm Ablängrollenbahn mit Skala u. Anschlag, Anbauseite links 4000 Zufuhrrollenbahn, Anbauseite rechts viele diverse Optionen auf Anfrage

Condition: used, Cutting height at 90°: 135 mm Cutting length: mm Mitre range horizontal: - Mitre range vertical: -60° to +60° Roller conveyor / support table: no Saw blade diameter: Speed: 2800 rpm Motor power: 2 kW Motor brake: yes Workpiece clamp: yes Spray device: yes Kjdpfxox I Ai Do Ad Newt Extraction port: 100 mm Machine length: Machine width: Weight: 110 kg

Year of construction: 1994, condition: used, Saw blade diameter vertical: 450 mm Kwedsx Ivk Iepfx Ad Not Blade diameter horizontal: 350 mm Release height: 153 mm Release depth: 110 mm Release width: 250 mm Pneumatic material clamps coolant lubrication Weight: approx. 450 kg

Condition: new, GRAULE ZS 170 N cross-cut and mitre saw - tiltable - Includes: - GRAULE ZS 170 N cross-cut and mitre saw - tiltable - - without machine stand and saw blade - Including: - GRAULE machine stand for type ZS 135 N and ZS 170 N Includes: - GRAULE type RO feed roller conveyor complete with support feet and connection bracket Plastic rollers with ball bearings Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm Includes: - GRAULE type RLK roller conveyor/length stop Kodpfxsu R Sype Ad Nowt with scale and material stop that can be folded back. Ball bearing mounted plastic rollers Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm - new exhibition machine -

Year of construction: 2004, condition: good (used), Crosscut and mitre saw, pull saw, crosscut saw, aluminum circular saw, metal circular saw, metal cutting saw, underfloor circular saw with double mitre, aluminum crosscut saw, underfloor saw, aluminum circular saw, aluminum semi-automatic circular saw, crosscut saw, glazing bead saw Kwedpfxot Hafko Ad Nst -Manufacturer: Graule Type ZS135 -Engine power: 2 kW -Speed: 2700 rpm -Saw blade: Ø 350 mm, pivoting -Cutting area: 90° flat 430 x 135 mm -Cutting area: 45° flat 300 x 135 mm -Transport dimensions: 1150/910/H1200 mm -Weight: 185 kg with pallet

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, saw blade diameter: 520 mm, type of input current: three-phase, total length: 1,750 mm, total height: 1,800 mm, total width: 1,030 mm, saw blade bore: 50 mm, input voltage: 400 V, ❇️ Graule ZS 200 N – Crosscut and Mitre Saw | Very Good Condition | Fully Functional | UVV Safety Inspected For sale on behalf of a client is a high-quality Graule ZS 200 N crosscut and mitre saw from a window manufacturing facility. The machine is in very good, well-maintained, and fully functional condition and has been regularly used until recently. Current UVV/safety inspection available (see photos). Viewing and function testing on site can be arranged at any time. Ksdpfxjx N Hxxs Ad Njwt ⸻ ❇️ Technical Specifications: • Manufacturer: Graule Maschinenbau GmbH, Aalen • Model: ZS 200 N • Machine type: Crosscut & Mitre Saw (for aluminium, wood, plastic) • Saw blade diameter: 520 mm • Bore: 50 mm • Swivel range: large, finely scaled mitre range • Drive: 400 V • Application area: Primarily for processing aluminium and profiles • Design: Heavy-duty industrial standard construction ⸻ ❇️ Features & Highlights • Very robust machine stand • Large dual-sided worktable (multiplex coated) • Pneumatic hold-down clamps • Extraction hood / extraction port • Digital measuring/length stop system (display mounted on top) • Precise swivelling mechanism with angle scale • Ideal for aluminium profiles in window manufacturing • Ready for immediate operation • Only original Graule circular saw blades permitted (manufacturer’s note) ⸻ ❇️ Condition • Very good, well-maintained, immediately ready for use • Fully functional • Well-kept appearance • Still in use • UVV safety inspected ⸻ ❇️ Sale & Processing • Invoice with VAT shown is possible • Delivery or transport available upon request and cost coverage • Location: 72229 Rohrdorf • On-site loading by overhead crane possible ⸻ ❇️ Price: Net asking price: €8,990 + VAT ⸻ ❇️ Dimensions: • Approx. D 175 cm x W 103 cm x H 180 cm ⸻ ⚠️ Other accessories for the workshop and metalworking are also available in my other listings. ‼️ Please also take a look at my other items. It’s worth it!