Used Machines with a clamping force of 1000 - 4999 kN for sale (459)

Condition: excellent (used), Year of construction: 2008, Demag System 500/900-3300 (2008) Clamping unit Cgjlnsukku Re Upvqjt Clamping force: 500 tons Platten dimension: 1300 x 1200 mm Distance between tie bars: 900 x 800 mm Mold height min. : 440 mm Mold height max. 880 mm Injection unit Screw diameter: 80 mm Injection pressure: 1855 bar Injection volume: 1779 cm3 Shot weight: 1620 g Transport dimensions Dimensions: 8,7 m x 2.3 m x 2,5 m Weight (clamping unit/injection unit): 16.500/5.400 kg 4x Core pullers Cascade control 2-way hydraulic EUROMAP 67 interface Additional connections for 2 core pulls on the fixed tool clamping plate 10-way cooling water flow regulator with temperature display Additional nozzle controller; 1 circuit; PID controller

Condition: excellent (used), Year of construction: 2008, Krauss Maffei KM 450 - 3500 C3 Sprinter injection machine Year of manufacture - 2008 Fully hydraulic two-platen clamping system. MC 4 control system with color monitor, integrated control panel, and built-in disk station Plasticizing system Complete HPS-UN plasticizing system for thermoplastics with a screw diameter of 90 mm. TECHNICAL DATA Closing unit - Closing force of mold: kN 4500 - Opening force of mold: kN 280 - Moving force of the moving plate fixing the mold - -. -- opening: kN 137 -- closing: kN 116 Cjln Uoq Nlzhspvqogt - Dimensions of clamping plate (h x v): mm 1270 x 1200 - Clearance between columns (h x v): mm 900 x 800 - Opening path of the mold: mm 1170 - Installation height of the mold: mm 480 - Opening width: mm 1650 - Ejector stroke: mm 250 - Ejector force: kN 95/48 Injection unit - Auger diameter: mm 90 Auger drive by electric motor with increasing drive force. For independent and energy-saving plasticization for opening and closing - Injection pressure: bar 1742 - Injection volume: cm3 1953 - Injection weight for PS: g 1777 - Screw speed, standard, optional: rpm 149/247 - Injection capacity cm3/s 3817 - Injection capacity at: -- standard screw speed: g/s 103 -- increased screw speed: g/s 152 Electric-hydraulic equipment - Rated power of pump motor: kW 90 - Drive power of auger (electr.) kW 88 - Installed power of heaters: kW 59 - Number of cylinder heating zones: - 9 - Dry cycle time according to Euromap: 1/h 1400 - Oil tank capacity: l 1075 Weight and dimensions - Net weight with control cabinet: t 26.3 - Dimensions of foundation space (L x W x H): m 7.98 x 2.35 x 2.51

Condition: used, Year of construction: 2020, operating hours: 5,400 h, clamping force: 400 kN, screw diameter: 55 mm, displacement volume: 475 cm³, injection pressure: 1,650 bar, overall weight: 24,500 kg, Freight basis: ex-site Coln Upvev S H Rheqjgt Delivery time: by arrangement Payment terms: 100% before taking delivery of the machine, net

Condition: excellent (used), Year of construction: 2000, Angel ES 500/125 HL Closing 125 TO Year 2000 Scrow 45mm Spray weight 318 cm3 Csln Ueh R T Slepvqogt

Condition: excellent (used), Year of construction: 2014, Functionality: fully functional, clamping force: 3,000 kN, screw diameter: 65 mm, clearance between the columns: 630 mm, displacement volume: 1,078 cm³, injection pressure: 2,070 bar, injection weight: 980 g, mold height (min.): 250 mm, Closing force: 300t Year of production: 2014 Injection weight: 980g Injection unit .../2250 Screw diameter 65 mm Specific injection pressure 2070 bar Injection volume 1078 ccm Injection weight 980 g Pump motor power 63 kW Cslewaidxjn Upvqsgt Cylinder heating band power 26 kW Screw L / D ratio 22 Tool closing system 300/... Closing force 300 t Tool plate dimensions 1020 x 940 mm Clearance between columns 630 x 630 mm Ejector force 59 kN Tool height 250...650 mm Opening stroke 600 mm Maximum plate distance 1250 mm Ejector stroke 200 mm Electrical connection (protection) 550 l Weight 11800 kg Dimensions (m) length x width x height 7.0 x 1.8 x 2.4 m

Condition: good (used), Year of construction: 2007, operating hours: 65,200 h, Functionality: fully functional, clamping force: 2,700 kN, screw diameter: 60 mm, clearance between the columns: 630,570 mm, injection pressure: 1,700 bar, injection weight: 850 g, mold height (min.): 280,700 mm, ejector force: 70 N, ejector stroke: 225 mm, opening stroke: 600 mm, overall weight: 10,050 kg, power: 56 kW (76.14 HP), Equipment: documentation/manual, Press in Excellent Condition Cgjljwah U Aen Upvqot

Condition: excellent (used), Year of construction: 2017, HAITIAN JU4500II (2017) Clamping force: 450 t Cgeln Upvsvyg Dqsqst Screw diameter: 55 mm Distance between tie bars V: 800 mm Distance between tie bars H: 810 mm Min Max Mould: 350-850mm Shot volume: 665 cm3 Type: Horizontal Drive: Hydraulic 4 core pullers

Condition: ready for operation (used), Year of construction: 2012, Haitian Mars 4700/2250 injection molding machine Year of production -2012 Wittmann W 832-2012 robot X axis -900 mm Y axis -1600 mm Z axis -3000 mm Cjln Ujwa Dr Dspvqegt Closing system: Clearance between columns - 800/820 mm Min/max mold height -320/780 mm Opening stroke - 1560 mm Injection system: Closing force - 4700 kN Injection pressure - 2110 bar Screw diameter - 65 mm Injection volume - 1068 ccm Injection weight -972 g Equipment: 2x core - moving plate

Condition: used, Year of construction: 2020, operating hours: 1,600 h, clamping force: 400 kN, screw diameter: 55 mm, displacement volume: 475 cm³, injection pressure: 1,650 bar, overall weight: 24,500 kg, terms of delivery: EXW (ex Works) Csln Upvjv S H Rbeqegt delivery time: on request terms of payment: 100% prior to delivery

Condition: excellent (used), Year of construction: 2004, Presse à injection Negri Bossi Coljv Siz Aon Upvqogt 1 250 tons Diameter vis 120 Année: 2004 Name of assets: 32,000 Vis et fourreau neufs

Condition: excellent (used), Year of construction: 2009, clamping force: 1,800 kN, screw diameter: 35 mm, displacement volume: 193 cm³, injection weight: 175 g, mold height (min.): 305 mm, ejector stroke: 200 mm, Equipment: documentation/manual, Battenfeld HM 180 /525H/60V Clamping force: 180t Year of manufacture: 2009 Injection weight in HP: 175/20.8g Cgslnoumbiko Upvqot Injection unit .../525/...60 Screw diameter: 35/18 mm Spec. injection pressure: 2743/2593 bar Injection volume: 193/22.9 cc Injection weight in HP: 175/20.8 g L/D screw ratio: 22/20 Clamping unit 180/... Clamping force: 180 t Clearance between tie bars: 570 x 520 mm Mold installation height: 305 mm Ejector travel: 200 mm Equipment: - Servo drive rotary table - 3 x hydraulic core

Condition: excellent (used), Year of construction: 2025, Different 2K machines from ENGEL - year 2006 -2016 - All from same manufacturer - very well maintained - 3 machines from 2006 - 2 machines from 2009- from 2012 and 2016 - 1 pcs 3K machine - all in stock now Celnjwab Amo Upvqjgt

Condition: like new (used), Year of construction: 2002, Engel DUO7050/1000 Clamping force: 1000 t CC100 Screw size: 120mm Shot volume: 4160cm3 Type: Horizontal Cgjleu D Nuken Upvqjt Drive: Hydraulic 2 core pullers Cascades: 12

Condition: excellent (used), Year of construction: 2003, Netstal SynErgy 1500-600 injection moulding machine Cgsln Upvsm Sgrzsqst - year of manufacture 2003 - maximum short-circuit force 1500kN - injection unit 600 - screw diameter 50mm - injection volume 353 ccm - injection weight 339 g - injection pressure 1890 bar - hydraulic ejector on moving platen - hydraulic core on movable disc - hydraulic core on fixed plate - two air valves - mould height 250-550mm - mould opening stroke 0-450mm - distance between columns 460 X 460 mm - machine weight 11 200 kg

Condition: used, Year of construction: 2001, Technical details: screw diameter: 30 mm closing force max.: 2000/ bei 175 bar kN opening force: 10 t screw revolutions per minute : 100 U/min control: FA-Inject 2000SIJECT OP37 Cgeln Upvju Nu N Reqst system pressure: 175 bar injection pressure max.: 1600 bar injection volume max.: 800 cm³ closing speed: 200 mm/min ejection stroke: 150 mm force of ejector: 120 kN opening stroke: 550 mm daylight: 700 mm total power requirement: 36,5 kW weight of the machine ca.: 6,0 t dimension machine xH: 3,0x1,9x3,9 m dimensions electric cabinet LxWxH: 0,8x0,6x2,15 m Plastic Injection Molding Machine - Elastomer Injection Moulding Machine - with heatable support table and heatable tool supporting plate - best suited for the production of special sealing products - tank volume hydraulics 110 l, heating and cooling method thermal oil circulation system, nozzles stroke 20mm - nozzle type: single nozzle, heating capacity per heating plate: 8,1 kW, heating plate size 600x500mm, heating plate temperature=250°C The machine is not connected. We sell the machine as described and as is *

Condition: used, Year of construction: 2017, operating hours: 30,000 h, clamping force: 300 kN, screw diameter: 55 mm, displacement volume: 511 cm³, injection pressure: 1,620 bar, overall weight: 17,000 kg, Freight base: FCA Pegnitz Delivery time: by arrangement Csln Upev R Hlpjvqsgt Payment terms: 100% before takeover of the machine, net

Condition: excellent (used), Year of construction: 2018, operating hours: 26,000 h, clamping force: 2,600 kN, screw diameter: 50 mm, clearance between the columns: 575 mm, injection weight: 438 g, mold height (min.): 195 mm, ejector force: 77,000 N, ejector stroke: 180 mm, opening stroke: 520 mm, plate length: 840 mm, plate width: 840 mm, overall weight: 10,000 kg, Borche BH-260 Clamping force: 260t Year of production: 2018 Injection weight: 438g Screw diameter: 50mm Specific injection pressure: 1680 bar Injection volume: 481 cc Injection weight: 438 g Cylinder heating band power: 11 kW Mold clamping system 260/... Clamping force: 260 t Mold table dimensions: 840 x 840 mm Clearance between columns: 575 x 575 mm Cgoln Upvsvitr Tjqet Ejector force: 77 kN Mold height: 195...600 mm Opening stroke: 520 mm Maximum platen distance: 1120 mm Ejector stroke: 180 mm Weight: 10,000 kg Dimensions (m) L x W x H: 6.5 x 1.9 x 2.1 m Control: KEBA 1075 Instrumentation: 1 x hydraulic core Gou87Cw88 2 x pneumatic valve Inverter EUROMAP connection

Condition: ready for operation (used), Year of construction: 2018, General Data Measurements width 1560 mm Measurements depth 5980 mm Measurements height 2190 mm Machine weight 8900 kg Clamping Unit Clamping force 1900 kN Colnev Rr Nte Upvqsgt Additional Equipment Air valves: 2 This HAITIAN ZHAFIR ZERES ZE1900 was manufactured in 2018. It is an electrical injection moulding machine, ideal for precision and efficiency in plastic processing. Consider the opportunity to buy this HAITIAN ZHAFIR ZERES ZE1900 electrical injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: good (used), Year of construction: 2005, Model: EL-EXIS S 100/420-310 DEMAG ERGOTECH- EL-EXIS E 1000/420-310 (130) Year of production: 2005 Controll: NC4 TECHNICAL DATA Screw Dia [mm]: 35 Shot Weight [g]: 150 Injection Pressure [bar]: 1865 Clamping Force [kN]: 1000 Cslotrzuqen Upvqsgt Tie Bar Distance [mm]: 420 x 420 Platen Size [mm]: 600 x 600 Mould Height min. [mm]: 200 Machine tested

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, clamping force: 1,800 kN, screw diameter: 55 mm, clearance between the columns: 570 mm, displacement volume: 594 cm³, injection pressure: 1.666 bar, injection weight: 540 g, mold height (min.): 325 mm, ejector stroke: 200 mm, opening stroke: 650 mm, plate width: 810 mm, plate height: 805 mm, total length: 5,200 mm, total width: 1,600 mm, total height: 2,200 mm, overall weight: 8,000 kg, Equipment: documentation/manual, Battenfeld HM 180/1000 Clamping force: 180t Year of manufacture: 2009 Injection weight in HP: 540g Injection unit .../1000 Screw diameter 55 mm Spec. injection pressure 1666 bar Injection volume 594 cc Injection weight in HP 540 g L/D screw ratio 22 Clamping unit 180/... Clamping force 180 t Size of clamping platens 810 x 805 mm Clear tie bar spacing 570 x 520 mm Ejector force 41.2 kN Tool installation height 325 mm Opening travel 650 mm Max. platen spacing 975 mm Cjln Ujvm U Tmspvqjgt Ejector travel 200 mm OIL tank capacity 400 l Weight 8000 kg Mass (m) LxWxH 5.2 x 1.6 x 2.2 m Year of manufacture 2009 Control type Unilog B6 Equipment: -2 x hydraulic core -1 x pneumatic valve -EUROMAP 67 -Rotameter 8-sectional

Condition: new, Year of construction: 2004, Clamping force: 300 t Screw diameter: 70 mm Cjln Upvouxdnbeqogt Type: Horizontal Drive: Hydraulic Makes: Engel. Model: ES 1350-300 H-LV . Age: 2004. Registered hours: 88712 Clamping system : Hydraulic. Clamp Force : 300 tonnes. Screw diameter : 70 mm. ( Maximum injection volume : 901 cubic centimeters. Injection pressure : 1350 Bar, (Raised ). Mould height : 355-850 mm. Daylight : maximum 1200 mm. Mounting Platen size 1050x650 mm (Hor x Ver). Extras: Core pulling 3. : Engel E-Ejector stroke 150 mm. With ERC Robot, thermos units, outfeed belt .

Condition: excellent (used), Year of construction: 2004, clamping force: 1,100 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,178 bar, injection weight: 103 g, ejector force: 40,000 N, overall weight: 7,400 kg, Closing force: 110t Year of production: 2004 Injection weight: 103g Injection unit 330/... Cgjlnev Txqce Upvqot Screw diameter 30 mm Specific injection pressure 2178 bar Injection volume 113 ccm Injection weight 103 g Tool closing system 110/... Closing force 110 t Tool plate dimensions 680 x 740 mm Clearance between columns without columns mm Ejector force 40 kN Opening travel 500 mm Ejector stroke 130 mm Weight 7400 kg Dimensions (m) length x width x height 5.2 x 1.6 x 2.2 m Control CC200

Condition: excellent (used), Year of construction: 2004, Engel Victory 1050/220 POWER (2004) CC200, new pump Clamping force: 220 t Screw dia: 55 mm Celjvx U Sgon Upvqsgt Platen size: 860x830mm Injection volume: 511 cm3 Type: Horizontal Drive: Hydraulic New pump, hoses etc.

Condition: like new (used), Year of construction: 2007, Engel Victory 1050/220 POWER (2007) Tiebarless machine Control : CC200 Clamping force: 220 t Platen size: 860x830mm Screw size: 55 mm Material: POM Cgoln Upovx U Risvqet Cores: 2 Air valve: 2

Condition: excellent (used), Year of construction: 2017, Clamping force: 360 t Screw diameter: 50 mm Shot weight: 428 g Distance between tie bars V: 820 mm Distance between tie bars H: 820 mm Shot volume: 471 cm3 Cgslnjvygy So Upvqot Type: Horizontal Drive: Hybrid Core pullers: 1+1