Injection molding machine

Engel ES 1050/200-HL.

Condition: used, Year of construction: 1997, _Engel ES 1050/200 HL_ SM ID: 300.30 Asset No.: A1998.016 Clamping force: 200 t Serial No.: 33813 Year of manufacture: 1998 Control system: CC 100 Screw diameter: 55 mm Screw type: GF Min. mold height: 250 mm Codpfx Afjztafdsgjhc Max. opening stroke: 700 mm Max. platen distance: 950 mm Ejector stroke: 150 mm Tie-bar spacing (H × V): 820 × 750 mm Platen size: 500 × 570 mm Quick clamp: Yes

Condition: used, Year of construction: 2005, Injection molding machine Manufacturer: Krauss Maffei Type: KM350 /1900 C2 Year of manufacture: 2005 Clamping force: 3,500 kN Tool opening force: 220 kN Drive force of moving platen: opening: 105 kN closing: 95 kN Platen size (h x v): 1,060 x 1,095 mm Mold opening (h x v): 710 x 710 mm Tool opening stroke: 920 mm Minimum tool installation height: 380 mm Chsdpoxu Uvaefx Afgsc Opening distance: 1,300 mm Ejector stroke: 250 mm Ejector force front/rear: 95 / 48 kN Pump motor: 75 kW Installed heating capacity: 30 kW Control zones for cylinder heating: 6 Dry cycle rate: 1,550 1/h Oil capacity: 720 liters Dimensions and weights: Net weight with control cabinet: approx. 16.0 tons L/W/H: 6,510 x 2,040 x 2,380 mm Maximum tool weight: 4,780 kg Injection unit: Working capacity: 1900 Screw diameter: 70 mm Injection pressure: 1,778 bar Displacement: 1,047 cm3 Shot weight for PS: 953 g Injection rate: 527 cm3/s Screw speed standard / option: 1/min. 285/349 Screw speed standard or stage 1: 95 PS Screw speed option or stage 2: 117 PS Nozzle force: 82 kN Fully hydraulic 2-platen clamping system PV control for injection unit MC4 32-bit microprocessor control Integrated control panel with TFT color display and Floppy disk drive (3.5 inch) for data backup Plasticizing: 1 complete thermoplastic plasticizing unit in wear-resistant design, screw diameter 70 mm with backflow prevention and open nozzle Nozzle radius: 15.00 mm Nozzle bore: 6.00 mm 51026ä

Condition: used, Year of construction: 1997, _Engel ES 1050/200 HL_ Clamping force: 200 t Year of manufacture: 1998 Control system: CC 100 Screw diameter: 45 mm Screw type: GF Min. mold height: 250 mm Max. opening stroke: 700 mm Max. platen distance: 950 mm Ejector stroke: 150 mm Tie-bar spacing (H × V): 820 × 750 mm Platen size: 500 × 570 mm Quick clamp: Yes Extras: Software gate separation Chsdsztadgopfx Afgsc

Condition: ready for operation (used), Year of construction: 1997, functionality: unexamined, machine/vehicle number: 39951, overall weight: 13,400 kg, Includes linear robot and peripherals. A used machine from a site closure is being sold. Cedpezrd Ruefx Afgehc Sale is made excluding any warranty for defects. The machine has not been tested but was operational until the end.

Year of construction: 2002, condition: ready for operation (used), Clamping force: 2500kN, clear tie bar distance: 630mm/630mm, opening stroke: 1150mm, min. mold installation height: 330mm, screw diameter: 60mm, specific injection pressure: 2000bar, max. stroke volume: 670cm³, connected load: 74kW, control: MC4. Machine dimensions: 5700mm/2200mm/2300mm, machine weight: 12.5t, operating hours: 47,572h. Available from February 2025, including special accessories, Krauss Maffei LRX-S 100, 8x hot runner control points, 4x core pull, blow-out unit, pressure accumulator, hydraulic tie-bar pulling device, energy-saving circuit, ALS interface, 20mA interface and color dosing device interface. On-site inspection is possible, documentation available. Chodpfeuiykdox Afgjc

Condition: good (used), Year of construction: 2004, VC330-80 plus Year: 2004 Clamping force : 800kn Injection Unit 330 Control unit CC200 A01 Screw D40 Cedovdqbhopfx Afgshc Working hours 91112 1x corepull 4x digital input 4x digital output 1x signe pahse socket 1x trhee phase socket NEW PUMP

Condition: used, Year of construction: 2001, Clamping force: 350 t Platten dimensions: 1040 x 950 mm Distance between tie bars: 710 x 630 mm Screw diameter: 50 mm Shot weight: 400 g Shot volume: 442 cm3 -2 core pullers -2 air valves, controllable hot runners: 1-16 chanel -1 kaskade Type: Horizontal Csdeva Ht Sspfx Afgjhc Drive: Hydraulic

Condition: excellent (used), Year of construction: 1998, Engel ES 650W500V/200HL. 2F 2-component machine  Tie-barless  2000 kN clamping force  Screw diameter, aggregate 1: 45 mm, aggregate 2: 45 mm Codpsgrafvefx Afgshc  Max. injection volume, aggregate 1: 226 cm³, aggregate 2: 183 cm³  Installation dimensions, mold: min 250 mm, max 750 mm  Year of manufacture: 1998

Condition: ready for operation (used), Year of construction: 2002, operating hours: 14,500 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 60 mm, displacement volume: 735 cm³, injection pressure: 1,481 bar, injection weight: 662 g, mold height (min.): 250 mm, ejector stroke: 250 mm, plate length: 650 mm, plate width: 1,050 mm, installation height: 850 mm, Machine in operational condition. Includes handling robot from ENGEL. Cedpoyuayrjfx Afgohc

Condition: ready for operation (used), Year of construction: 2007, operating hours: 101,500 h, clamping force: 3,000 kN, overall weight: 19,700 kg, Hydraulic injection moulding machine manufactured in 2007. This Engel Victory VC1800/300 P features a clamping force of 3,000 kN and an opening stroke of 900 mm. It includes a robust control system with a 15" TFT touchscreen and a maximum injection pressure of 1,735 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory VC1800/300 P machine we have for sale. Contact us for further details. Identical Engel Victory VC 1800/300P (2008 model) also for sale — same configurations. • Power supply: 3 x 400 V + N + PE / 50 Hz • Control system: ENGEL CC200 A02 (15" TFT touchscreen) • Opening stroke: 900 mm • Maximum platen distance: 1,500 mm • Minimum mould installation height: 600 mm • Ejector stroke: 200 mm • Ejector force: 90 kN • Pump drive power: 37 kW • Injection unit version: M3 • Available screw diameters: 60 / 70 / 80 mm • Screw diameter installed: 70 mm • Maximum swept volume (70 mm): 1,039 cm³ • Maximum screw speed: 226 rpm • Injection rate (70 mm): 385 cm³/s • Specific injection pressure (70 mm): 1,442 bar • Maximum injection pressure (increased): 1,735 bar • Nozzle stroke: 500 mm • Nozzle contact force: 110 kN • Hours: 101,500 h • Maintenance/Service history: • Complete hydraulic hose replacement in 2025 • Motor and planetary gearbox replacement in 2021 • High-pressure cylinder replacement in 2020 • Several cost-intensive main components renewed in recent years Chjdjyn Ntzepfx Afgsc Additional equipment • Robot: ENGEL ERC 64 (included) • Axes travel: X 1,200 mm, Y 1,300 mm, Z 3,600 mm • B-axis rotation: -90° to +270° • Vacuum circuits: 4 • Pneumatic circuits: 8 • Reject/quality conveyor belt • Box transfer for 600 x 400 x 250 mm boxes • GWK temperature control tower (optional)