Used Machines with a clamping force of 1000 - 4999 kN for sale (459)

Condition: good (used), Year of construction: 2006, 1x used KraussMaffei KM160-750 CX with robot, safety fence, and conveyor belt Cjb Em Rjwcbcljtdogt Year of manufacture: 2006 Ma-No. 61008160 Screw: 50mm Core pulls: 2x Immediately available!

Condition: like new (used), Year of construction: 2008, Krauss Maffei KM 420-2000 CX Excellent condition LIKE NEW! Only 6000 hour in automatic cycle Clamping/Injection Matrix • Clamping force: 4200 kN • Mounting plate dimensions (h × v): 1270 × 1230 mm • Clearance between columns (h × v): 800 × 800 mm • Min./max. mold height: 580 - 1020 mm • Maximum opening width: 1600 mm Injection Unit • Screw diameter: 75 mm • Injection volume: 1237 cm³ • Shot weight: 1126 g • Injection pressure: 1635 bar Electro-Hydraulic Equipment • Power rating of the pump motor: 75 kW • Power rating of barrel heating: 29 kW Csb Emev Ax Hvj Rtdsgt Dimensions and Weight (Approximately) • Net weight with control cabinet: 24.8 t • Dimensions (L × W × H): 6.90 × 2.49 × 2.38 m Type: Horizontal Drive: Hydraulic

Condition: excellent (used), Year of construction: 2008, Wittmann-Battenfeld HC 400/2250 S Year of construction 2008 Unilog B6 control system Operating hours: approx. / (pump) Screw diameter 65 mm Fuel weight: approx. 980gr/hp Distance between tie bars 900 x 710mm Extras: Core pull Handling interface Battery Cobowb U S Ro Em Rtdjgt incl. Battenfeld Handling R10 Machine weight: 20.000kg Machine is free! Subject to alterations, prior sale and errors excepted!

Condition: like new (used), Year of construction: 2018, operating hours: 17,000 h, Functionality: fully functional, machine/vehicle number: 222866, clamping force: 3,000 kN, screw diameter: 70 mm, displacement volume: 1,120 cm³, Cleanroom machine only used PP Cgsb Emjwb Dywo Rtdot 300 tons, screw diameter 70 mm Barrier screw with homogenizer and mixing head Only 1,700 operating hours Only used PP

Condition: used, Year of construction: 1990, Functionality: fully functional, machine/vehicle number: 64415, clamping force: 3,300 kN, clearance between the columns: 625 mm, pressure: 2,015 bar, Injection molding machine Stork ST 1600 - 330 Cob Em Rtevpfbtsdjgt

Condition: ready for operation (used), Year of construction: 2005, operating hours: 49,412 h, Functionality: fully functional, machine/vehicle number: 90962, clamping force: 8,000 kN, screw diameter: 100 mm, clearance between the columns: 1,120 mm, displacement volume: 5,700 cm³, plate width: 1,620 mm, plate height: 1,530 mm, Equipment: documentation/manual, including protective fence and conveyor belt Cjb Eewbpq Ism Rtdegt

Condition: ready for operation (used), Year of construction: 2010, Functionality: fully functional, clamping force: 3,500 kN, screw diameter: 55 mm, displacement volume: 570 cm³, Clamping force 3500 kN Mould opening force, max. 221 kN Travel force movable platen opening 86 kN Travel force movable platen closing 68 kN Size of mould platens (h x v ) 1060 x 1095 mm Distance between tie bars (h x v) 710 x 710 mm Mould opening stroke 920 mm Mould height min 380 mm Max. daylight 1300 mm Hydraulic ejector - stroke 250 mm Ejector force 95 / 49 kN Injection unit: Screw diameter 55 mm Ls/D ratio 21,8 Injection pressure 2387 bar Stroke volume 570 ccm Shot weight (PS) 519 gr. Injection rate 261 ccm/s Screw speed 260 1/min Plasticising rate max. 49 g/s Nozzle pressure 82 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 45 kW Installed heating capacity 36 kW Adjustable barrel heating zones 7 Reservoir capacity 720 ltr. Dimensions and weights: Dimensions of the machine ca. 7,00 x 2,30 x 2,40 m Total machine weight 17800 kg Max. mould weight 3430 kg Accessories: - Anti vibration pads - Anti vibration pads - integrated Krauss Maffei Robot LRX150 X: 900 mm Y: 1800 mm Cjb Emjwbivqo Rtdogt Z: 3500 mm C: 90° Additional Options: - 2 x hydr. core pull on movable plate - 1 x air valve - 8 x hotrunner controller - 2 x 5-fold water flower

Condition: like new (used), Year of construction: 2015, SERVO machine Clamping force: 350 ton Max opening: 730 mm Min. mold height: 350 mm Max. mold height: 745 mm Plates dimensions: 1040 x 1060 mm Distance between tie bars: 720 x 720 mm Screw diameter: 70 mm Injection pressure: 1877 bar Injection volume: 1212 cm³ Shot weight: 1103 g Machine has only: 27,000 hours Cgob Em Rtovf Hvkedst 2 x core pullers on moving platten 12 x hot runners New screw in 2017 30% glass

Condition: excellent (used), Year of construction: 2001, KraussMaffei KM 200-1400 CX Year of construction 2001 Control MC4 Operating hours: approx. 16,700h (pump) Screw diameter 70 mm Fuel weight: approx. 841gr./hp Spar distance 560 x 560mm Machine weight: 10500kg Extras: Core pulls Cgeb Em Rjwb U S Dotdst Handling interface Machine is free! Subject to alterations, prior sale and errors excepted!

Condition: like new (used), Year of construction: 2019, operating hours: 11,337 h, Functionality: fully functional, clamping force: 1,600 kN, screw diameter: 30 mm, Equipment: documentation/manual, Fully equipped from the clean room Only PP used. Screw like new. Cjb Em Rtjwb Dl Tjdsgt

Condition: ready for operation (used), Year of construction: 2008, General Data Machine weight 22200 kg Clamping Unit Clamping force 3000 kN Distance between bars 1090 mm Mould height min 550 Additional Equipment ERC 33/2-F (Year: 2008) Only 1K, second unit was dismantled and scrapped by Engel Machine is tie-bar-less Handling was dismantled after the last production run and should be reassembled and commissioned by Engel or an expert When the clamping cylinder is fully retracted, the mold area between the two clamping platens is approx. 1,400 mm Dimensions of the measuring surface: a: 4.35 m b: 2.00 m c: 3.28 m / Dimensions of the right-hand cover parallelepiped: Length: 6.70 m Width: 2.00 m Height: 2.28 m Measuring distance: 1.00 m Oil temperature: 40,00 °C /Injection pressure: 21.00 bar/Holding pressure: 86.00 bar/Screw stroke: 130.00 mm/Opening stroke: 497.00 mm/V1, V2, V3: 100.00 %/Ejector P: - bar/Cooling time: 10.00 s/Cycle time: 24.82 s/Shot weight: 264.64 g/Material: HDPE/Injection mould Fa. / Injection mould: 0,00/Drive power: 37 KW This Engel Victory 2050H500V/300 Combi was manufactured in 2008. A hydraulic injection moulding machine, it represents a solid choice for those looking to enhance their production capabilities with a reliable and efficient model. Contact us for more information. Application Types Injection Moulding Cjb Em Rtjv T D Nwodogt

Condition: excellent (used), Year of construction: 2003, Battenfeld HM 1300/350 YEAR 2003 Wear power 130 TO Scrow 40mm Stroke volume 220 cm Holmen far 52 x 47 Ceb Em Rtedv Tbfjdjgt Betreibsstunden ca 79800 h

Condition: like new (used), Year of construction: 2019, Krauss Maffei KM 300-2000 CX- Hybryd injection molding machine Year of production -2019 Number of operating hours - 19,000 Fully hydraulic closing system. MC 6 control system based on an industrial computer in real-time Ethernet technology, equipped with an integrated 19" control panel with a color touch screen. Plasticizing system complete plasticizing system for thermoplastics in the version with abrasion protection, with a screw diameter of 70 mm, with a non-return lock and an open nozzle Closing unit - Mold closing force: kN 3000 - Mold opening force: kN 169 - Dimensions of the mounting plate (h x v): mm995 x 1050 - Clearance between columns (h x v): mm630 x 630 Increased width of the mold mounting plates and increased horizontal clearance between columns KM 300 by 80 mm; Clearance after enlargement: 710 x 630 mm ( h x v) - Mold opening stroke: mm820 - Minimum height mold:mm330 Increased by 150 mm min. mold height and max. opening width - Opening width: mm1150 - Ejector stroke: mm200 - Ejector force forward/backward: kN 58/28 Injection unit - Screw diameter:mm 70 Thermoplastic HPS-UN screw for high-performance applications - 70 mm Screw drive by electric motor for independent and energy-saving plasticization during mold opening and closing - Ls/D ratio: -20.0 - Injection pressure:bar 1877 - Injection volume:cm3 1078 - Injection weight 1): g 981 - Injection speed: mm/s100 - Injection efficiency:cm3/s385 - Screw speed, standard:rpm220 - Efficiency plasticization 1): Cgeb Em Rjwa S Imjtdst - at standard screw speed: g/s 75.8 Pressure tank for increased injection power switched off by machine control Additional pump for hydraulic ejector and core function. For parallel movements of hydraulic elements during mold opening and closing, as well as pressure maintenance function for hydraulic cores. Electric-hydraulic equipment - Nominal power of the pump motor:kW 55 - Installed power of the heaters:kW 29.2 - Number of cylinder heating zones: -6 - Dry cycle time / stroke according to Euromap 6 2) :s/mm 2.7 / 441 - Oil tank capacity: dm3 720 Dimensions and weight - Net weight with control cabinet: t 20.1 - Machine dimensions (length x width x height) 3):m 6.55 x 2.17 x 2.25

Condition: excellent (used), Year of construction: 2010, Clamping force: 110 t Tie bar distance: 470x420 mm Min Mould height: 275 mm Max Mould height: 775 mm Platen size : 680x663mm Screw diameter: 22 mm Shot volume: 41 cm3 Opening force: 55 kN Opening path: 500 mm Correct injection pressure: 2864 bar Nozzle pressure: 47 kN Path of the pant : 250 mm Forward ejector force: 41,2 kN Reverse: 26,4 kN Max. mold weight : 1000 kg min. tool diameter: 315 mm Working hours: 70.000 h Type: Horizontal Drive: Hydraulic Cgsb Em Rsu Ekaqstdjt Unilog B6 controll Air Valve Core puller Euromap 67

Condition: excellent (used), Year of construction: 2012, operating hours: 66,265 h, BATTENFELD EcoPower 110/350 (year of construction 2012) (110t) Electric, high speed, energy-saving. Control system: UNILOG B6 - touchscreen Operating hours: 66,265 Screw diameter: 35 mm Shot weight: 153 gr/hp Injection pressure: 2083 bar Shot volume: 168 ccm Closing force: 110 t Distance between tie bars: 470×420 mm Max. Size of mold platens: 690×663 mm Ejector: hydraulic Toggle lever Robot interface Europe 67 Air valve x 1 Hydraulic core puller x 1 Hardened injection unit - bimetal Parallel movements Centralized lubrication Cgjbjwb U Sqe Em Rtdjt Heating capacity: 10.4 kW Dimensions: Length / width / height: 4.50×1.50×2.10 m Weight: 4800 kg Machine is free! Subject to alterations, prior sale and errors excepted!

Condition: ready for operation (used), Year of construction: 1996, General Data Machine weight 4000 kg Cebsv T D Rbs Em Rtdogt Clamping Unit Clamping force 1300 kN This Arburg Allrounder 420C 1300-350 was manufactured in 1996. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this Arburg Allrounder 420C 1300-350 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2005, ENGEL VICTORY 650/150 injection molding machine Year of manufacture - 2005 Clamping system Clamping force: 1500 kN Plate size h x v: 750 x 750 mm Min. installation height: 300 mm Maximum plate distance: 900 mm Opening stroke: 600 mm Ejector stroke: 150 mm Ejector force: 61 kN Centring of moving platen D: 160 mm Cgeb Eowa S Dzsm Rtdst Centring of fixed platen D: 160 mm Mould weight: 1800 kg Injection system Screw diameter: 45 mm Stroke volume: 318 ccm Injection pressure: 1525 bar Screw length: 20 l/d Screw stroke: 200 mm Screw speed: 290 min Screw torque: 5 N Plasticizing flow: 55 g/s PS Number of heating zones: 5 Dimensions and weight Machine dimensions LxWxH: 5.5m x 1.7m x 2.4m Total weight: 9500 kg

Condition: used, Year of construction: 2001, Clamping force: 250 t Screw diameter: 70 mm Distance between tie bars V: 630 mm Distance between tie bars H: 630 mm Core pullers: 2x Air valve: 1x Cgeb Em Rtevbbvkodjt Type: Horizontal Drive: Hydraulic

Condition: excellent (used), Year of construction: 2007, operating hours: 50,000 h, Demag Ergotech-Concept 1000/500-600 Year of construction 2007 NC4 control system Operating hours: approx. 50,000h (pump) Screw diameter 50 mm Fuel weight: approx. 359gr/hp Spar distance 500 x 500mm Machine weight: 5700kg Extras: 1x core pull & handling interface Machine is free! Subject to alterations, prior sale and errors excepted! Csb Emewb U Ske Rtdegt

Condition: excellent (used), Year of construction: 2004, Arburg 420C 1000-250 injection molding machine Year of production: 2004 Injection elements: Screw diameter: 40 mm Injection weight: 158 g Injection pressure: 1390 bar Injection volume: 188 ccm Closing elements: Csb Eewa Sx Eom Rtdsgt Closing force: 100 t Clearance between columns: 420x420 mm Table plate dimensions max: 570x570 mm Ejector: hydraulic Closing system: hydraulic Control: SELOGICA Dimensions: Weight: 3660 kg Length/Width/Height: 4.30x1.64x2.08 m

Condition: good (used), Year of construction: 2006, Clamping force: 250 tons Distance between tie bars: 630 x 630 mm Mold height: 330 x 830 mm Opening stroke: 675 mm Dylight max: 1505 mm Cob Em Rtorgw Exodsgt Screw diameter: 50 mm Shot volume: 530 cm3 Shot weight: 482 g Injection pressure: 2426 bar Cores- 2 Hot runners- 12 + Robot Demag ergotech W733-0174 Year of manufacture: 2006 Handling capacity: 10 kg Number of axes: 3 Max range: 1000 mm X- 900 mm Y-1400 mm Z- 2500 mm

Condition: like new (used), Year of construction: 2006, Arburg 470C 1500-800 Year of construction 09/2006 Control Selogica Operating hours: approx. 68,000h (pump) Screw diameter 70 mm Fuel weight: approx. /gr./hp Cob Em Rtowb U R Tedogt Distance between tie bars 470 x 470mm Extras: Core pull Paint dispenser interface Handling interface Machine weight: 5500kg incl. Arburg Multilift Year of construction 2006 X-200mm Z-800mm

Condition: excellent (used), Year of construction: 2005, Krauss Maffei KM 160-380 CX injection molding machine Year of production - 2005 Number of operating hours - 34,200 Fully hydraulic closing system. MC5 control system with color monitor, integrated control panel and 3 built-in USB ports. Plasticizing system A complete plasticizing system for thermoplastics in the version with abrasion protection, with a screw diameter of 40 mm, with a non-return lock and an open nozzle TECHNICAL DATA OF THE MACHINE IN STANDARD VERSION Closing unit - Mold closing force: kN 1600 - Mold opening force: kN 86.4 - Dimensions of the mounting plate (h x v): mm 820 x 845 - Clearance between columns (h x v): mm 520 x 520 - Mold opening path: mm 650 - Mold installation height: mm 300 - Plate opening stroke: mm 950 - Ejector stroke: mm 150 Cgob Em Rowa Svkjtdet - Ejector force: kN 22.6/9.9 Injection unit - Screw diameter: mm 40 - Pressure injection: bar 1860 - Injection volume: cm3 201 - Injection weight for PS: g 183 - Number of screw revolutions, standard, option: rpm 390/490 Electric-hydraulic equipment - Nominal power of the pump motor: kW 22 - Installed power of heaters: kW 10.97 - Number of cylinder heating zones: - 5 - Number of dry cycles according to Euromap: 1/h 1600 - Oil tank capacity: l 489 Dimensions and weight - Net weight with control cabinet: t 6.0 - Machine dimensions (length x width x height): m 4.6 x 1.6 x 2.1

Condition: good (used), Year of construction: 2001, Arburg 570 C 2200-1300(2001) Clamping force \- 220 ton Screw diameter: 60 mm Cgeb Em Reuy Ryastdjt Shot weight: 607 g/PS Stroke volume: 664 cm³ Heating capacity: 23 kW Opening stroke: 650 mm Distance between bars: 570 mm Mould height min: 300 mm Mould height max: 950 mm Size of mold platens: 795 x 795 mm

Condition: excellent (used), Year of construction: 2009, SUMITOMO SE350HD-C1600 (2009) Clamping force: 350 t Screw diameter: 63 mm Shot weight: 853 g Distance between tie bars V: 710 mm Distance between tie bars H: 760 mm Plate dimensions: 1070x1020 mm Csbsvygmls Em Rtdegt Shot volume: 888 cm3 Type: Horizontal Drive: Electric Only 40.000 hours 2 core pullers