KM 125-620 C1

KraussMaffei

Year of construction: 2008, operating hours: 3,200 h, condition: ready for operation (used), screw diameter: 60 mm, This Krauss Maffei KM 200 CX 1400 MC5 was manufactured in 2008. It features a clamping force of 200 tons, expandable to 300 tons, and a screw diameter of 60 mm. The machine includes a hydraulic ejector, side air valve, robot interface, and a 4-zone mold temperature control system. If you are looking to get high-quality injection molding capabilities, consider the Krauss Maffei KM 200 CX 1400 MC5 machine we have for sale. Contact us for more information. Additional equipment • Hydraulic ejector Nwsdpfx Ajzw Atlohksk • Side air valve • Robot interface • 4-zone mold temperature control system Machine Benefits Technical Machine Benefits • Tie bar spacing: 560 x 560 mm Extra Information Machine still under power

Year of construction: 2002, condition: ready for operation (used), Clamping force: 2500kN, clear tie bar distance: 630mm/630mm, opening stroke: 1150mm, min. mold installation height: 330mm, screw diameter: 60mm, specific injection pressure: 2000bar, max. stroke volume: 670cm³, connected load: 74kW, control: MC4. Machine dimensions: 5700mm/2200mm/2300mm, machine weight: 12.5t, operating hours: 47,572h. Available from February 2025, including special accessories, Krauss Maffei LRX-S 100, 8x hot runner control points, 4x core pull, blow-out unit, pressure accumulator, hydraulic tie-bar pulling device, energy-saving circuit, ALS interface, 20mA interface and color dosing device interface. On-site inspection is possible, documentation available. Nsdpjuiykdefx Ahkewk

Condition: ready for operation (used), Year of construction: 2001, operating hours: 4,517 h, clamping force: 16,000 kN, injection weight: 7,450 g, This 3-axis Krauss Maffei 1600-17200MC hydraulic injection moulding machine was manufactured in 2001. It features a clamping force of 16,000 kN and a screw diameter of 125 mm. The machine has a maximum shot weight of 7450 g and a platen size of 2600 x 2110 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 1600-17200MC machine we have for sale. Contact us for further details. • Injection unit: 17200 • Distance between tie bars (h × v): 1600 × 1250 mm • Platen size (h × v): 2600 × 2110 mm • Clear distance (x × y): 1800 × 1400 mm • Max. mold opening stroke: 2,500 mm • Mold installation height (min–max): 900–1,600 mm • Opening width: 3,400 mm • Mold opening force: 1,108 kN • Moving platen force: Opening 177 kN / Closing 153 kN • Ejector stroke: 300 mm Nwsdpfoyyyr Tex Ahksk • Ejector force (forward/backward): 415 / 177 kN • Operating voltage: 400 V / 50 Hz • Motor current: 446 A • Heating current: 164 A • Total pump operating hours: 73,761 h Additional equipment • Wittmann Robot System W650 (2001) • Hub Stroke X 1500; Y 2600; Z 3500 • Spare cylinder/screw set (1x) • Internal cooling system • Core pullers (2x)

Condition: new, Year of construction: 2023, This high-precision all-electric injection moulding machine was manufactured in 2023 and is part of the renowned PX Series by KraussMaffei. The machine offers outstanding energy efficiency, repeatability and production accuracy, making it ideal for technical mouldings, medical components, packaging, electronics and other high-quality plastic products. The PX series combines compact design with high performance, ensuring maximum flexibility and productivity while maintaining low operating costs. Technical Data - Manufacturer: KraussMaffei - Model: KM 50-180 PX - International designation: 180 PX / 50 - Machine type: All-electric injection moulding machine Nsdpfszwficex Ahkowk - Year of manufacture: 2023 - Machine weight: 4,750 kg - Condition: Excellent (NEW) Please Note: The information was obtained to the best of our abilities and - where possible - from the manufacturers. It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken. We advise you to check any vital details! * Manufacturer: KraussMaffei * Model: KM 50-180 PX * International designation: 180 PX / 50 * Machine type: All-electric injection moulding machine * Year of manufacture: 2023 * Machine weight: 4,750 kg Control Unit: MC6 Injection unit: 180 Screw diameter: 30mm

Condition: used, Year of construction: 2005, Injection molding machine Manufacturer: Krauss Maffei Type: KM350 /1900 C2 Year of manufacture: 2005 Clamping force: 3,500 kN Mold opening force: 220 kN Drive force of the moving platen: opening: 105 kN closing: 95 kN Platen size (h x v): 1,060 x 1,095 mm Nwedpfxexu Uvaj Ahkok Daylight opening (h x v): 710 x 710 mm Mold opening stroke: 920 mm Minimum mold installation height: 380 mm Opening width: 1,300 mm Ejector stroke: 250 mm Ejector force forward/backward: 95 / 48 kN Pump motor: 75 kW Installed heating capacity: 30 kW Control zones for cylinder heating: 6 Dry cycle rate: 1,550 1/h Oil capacity: 720 liters Dimensions and weights: Net weight with control cabinet: approx. 16.0 tons L/W/H: 6,510 x 2,040 x 2,380 mm Maximum mold weight: 4,780 kg Injection unit: Working capacity: 1900 Screw diameter: 70 mm Injection pressure: 1,778 bar Displacement: 1,047 cm3 Shot weight for PS: 953 g Injection rate: 527 cm3/s Screw speed Standard / Option: 1/min 285/349 Screw speed Standard or Stage 1: 95 PS Screw speed Option or Stage 2: 117 PS Nozzle system force: 82 kN Fully hydraulic 2-platen clamping system PV control for injection unit MC4 32-bit microprocessor control Integrated control panel with TFT color screen and Floppy disk drive (3.5 inch) for data backup Plasticization: 1 complete thermoplastic plasticization unit in wear-resistant design, screw diameter 70 mm with backflow preventer and open nozzle Nozzle radius: 15.00 mm Nozzle bore: 6.00 mm 3826ä

Condition: used, Year of construction: 1998, operating hours: 93,000 h, functionality: fully functional, machine/vehicle number: 174380, clamping force: 2,000 kN, screw diameter: 60 mm, clearance between the columns: 560 mm, mold height (min.): 1,050 mm, input frequency: 50 Hz, input voltage: 400 V, input current: 222 A, Equipment: documentation/manual, For sale: 200-ton Krauss Maffei injection molding machine. The machine is currently in production and can be inspected while in operation. Distance between columns (H x V): 560 x 560 mm Platen size: 915 x 915 mm Max. open height: 1050 mm Min. mold height: 350 mm Opening stroke: 700 mm Nwjdpjzwwyaefx Ahksk

Condition: excellent (used), Year of construction: 2016, KRAUSS MAFFEI KM 160-180 EX incl. LRX 100 (35.000 h) (S&P 3800) Manufacture year: 2016 Operating hours: 35,000 Stunden Screw: 25 mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Njdpfxezv Szcs Ahkewk Clamping Force: 160 t Tie bar distance: 630 x 520 mm Mould installation height min.: 300 mm Plate distance max.: 1000 mm Dimensions: 5400 x 1600 x 2100 mm Eeight: 13200 kg Connected load: 28 kW All electric, 2 x Airvalve, 12 x Hoterunner, MC 6 in german, english, polnish and chinese, Interface Robot, Interface Temperatur device, Robot System LRX 100 (10 kg) X = 550mm / Y = 120mm / Z = 1500 mm / C = 90°, price when new approx. 205.000,- Euro Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 1998, Injection molding machine With two components Kraussmaffei Multiinject KM200-1000-390 CZ Nwedpofx Tztofx Ahkek Year of manufacture 1998 Closing force 200 tons Screw diameter 60 mm - 566 g Screw diameter 2 - 35 mm - 178 g Tie bar spacing 560 x 560 mm

Condition: excellent (used), Year of construction: 2015, KRAUSS-MAFFEI KM 900-8100 GX injection molding machine Year of manufacture: 2015 Clamping force: 9000 kN / 900 t Control system: MC6 Closing system: hydraulic-mechanical, two-platen Injection unit: 8100 Design and control Hydraulic-mechanical two-platen closing system with 4 pressure cushions on the stationary platen and 4 adjusting units on the moving platen. PV – injection unit adjustment. MC6 control system, based on an industrial computer with real-time Ethernet technology, equipped with an integrated 19-inch control panel with a color touchscreen, LED backlighting, and ProcessDesigner process visualization. Plasticizing unit Complete plasticizing unit for thermoplastics, featuring abrasion protection. Nodpfezvm T Tex Ahkswk Screw diameter: 105 mm Backflow valve: yes Nozzle: open Closing unit Mold clamping force: 9000 kN / 900 t Mold opening force – pressure cushions: 630 kN Dimensions of mounting plates (H × V): 1660 × 1530 mm Distance between columns (H × V): 1180 × 1000 mm Maximum mold opening stroke: 1600 mm Mold height min./max.: 500–1100 mm Maximum distance between platens: 2100 mm Ejector stroke: 300 mm Ejector force front / rear: 140 / 70 kN Injection unit 8100 Screw diameter: 105 mm Ls/D ratio: 23:1 Maximum injection pressure: 1778 bar Injection volume: 4546 cm³ Injection weight for PS: 3228 g Injection rate: 805 cm³/s Screw speed: 150 rpm Nozzle clamping force: 166 kN Electrical and hydraulic equipment Rated power of pump motor: 120 kW Installed power of heaters: 59 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 3.3 s / 826 mm Dry cycle time / stroke according to KraussMaffei standards: 2.9 s / 590 mm Oil tank capacity: 1450 l Dimensions and weight Machine dimensions (L × W × H): 10.72 × 3.03 × 2.51 m Net weight including control cabinet: 40 t

Condition: excellent (used), Year of construction: 2018, KRAUSS-MAFFEI KM 900-8100 GX injection molding machine Year of manufacture: 2018 Control system: MC6 Clamping system: hydraulic-mechanical, two-platen Injection unit: 8100 Design and control Hydraulic-mechanical two-platen clamping system with 4 pressure pads on the fixed platen and 4 adjustment units on the moving platen. PV – injection unit adjustment. MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Integrated 19-inch control panel with a color touchscreen, LED backlighting, and visualization of all running ProcessDesigner processes. Plasticizing unit Complete plasticizing unit for thermoplastics with abrasion protection. Screw diameter: 105 mm Backflow valve: yes Nozzle: open Nedjzvm E Aspfx Ahkowk Nozzle radius: 25 mm Nozzle opening: 9 mm Clamping unit Clamping force: 9000 kN / 900 t Mold opening force: 630 kN Platen dimensions (H × V): 1660 × 1530 mm Distance between columns (H × V): 1180 × 1000 mm Standard maximum distance / opening width: 2100 mm Ejector stroke: 300 mm Ejector force front / rear: 140 / 70 kN Injection unit 8100 Screw diameter: 105 mm Ls/D ratio: 23:1 Maximum injection pressure: 1778 bar Injection volume: 4546 cm³ Injection weight: 3228 g* Injection speed: 90 mm/s Injection rate: 779 cm³/s Standard screw speed: 150 rpm Plasticizing rate at standard speed: 135 g/s* Nozzle pressure force: 166 kN * according to the manufacturer's specifications / reference material provided. Electrical and hydraulic equipment Rated motor power: 120 kW Installed heater power: 59 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 3.3 s / 826 mm Dry cycle time / stroke according to KraussMaffei standards: 2.9 s / 590 mm Required hydraulic oil quantity: 1450 l Dimensions and weight Machine dimensions (L × W × H): 10.72 × 3.03 × 2.51 m Net weight including control cabinet: 40.0 t

Year of construction: 2004, condition: ready for operation (used), For sale is an injection molding machine from Krauss-Maffei, model 125-520 C2. The machine was used in a company that places great emphasis on cleanliness and maintenance. Year of manufacture: 2004 Pneumatic needle valve 2x hydraulic core pull 83,000 operating hours Form clamping force: 1500 kN MC 4 control system with color monitor, integrated control panel Nsdpfolkbhwox Ahkswk 4 additional cylinders: 1x D35 / 2x D40 / 1x D45, included Prices plus VAT Inspection possible by appointment. Contact us, our team will be happy to assist you further. Trade-in or exchange possible! Machine buying and selling WE BUY / SELL PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: excellent (used), Year of construction: 2013, KRAUSS-MAFFEI KM 550-4300 GX injection molding machine Year of manufacture: 2013 Control system: MC6 Clamping system: hydraulic-mechanical, two-platen Injection unit: 4300 Design and control Hydraulic-mechanical two-platen clamping system with 4 pressure pads on the fixed platen and 4 adjustment units on the moving platen. PV – injection unit adjustment. MC6 control system with a color TFT monitor, integrated control panel, and USB data storage. Plasticizing unit Complete plasticizing unit for thermoplastics with abrasion protection. Screw diameter: 90 mm Backflow valve: yes Nozzle: open Clamping unit Clamping force: 5500 kN / 550 t Mold opening force – pressure pads: 385 kN Platen dimensions (H × V): 1430 × 1350 mm Distance between columns (H × V): 1040 × 910 mm Maximum mold opening stroke: 1350 mm Minimum/maximum mold height: 400–950 mm Nwsdpjzvm Dlsfx Ahkok Maximum distance between platens: 1750 mm Ejector stroke: 250 mm Ejector force front / rear: 95 / 49 kN Injection unit 4300 Screw diameter: 90 mm Ls/D ratio: 20:1 Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Injection rate: 636 cm³/s Screw speed: 195 rpm Nozzle clamping force: 129 kN Electrical and hydraulic equipment Rated motor power: 90 kW Installed heater power: 44 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 2.8 s / 728 mm Dry cycle time / stroke according to KraussMaffei standards: 2.5 s / 520 mm Oil tank capacity: 1180 l Dimensions and weight Machine dimensions (L × W × H): 8.08 × 2.80 × 2.39 m Net weight with control cabinet: 25.0 t

Condition: excellent (used), Year of construction: 2013, KRAUSS-MAFFEI KM 850-8100 MX injection molding machine – with servo drive Year of manufacture: 2013 Control system: MC5 Clamping system: hydraulic-mechanical, two-platen Drive: hydraulic with servo drive Design and control Hydraulic-mechanical, two-platen clamping system with 4 pressure cushions and 4 adjusting units mounted on the moving platen. PV – injection unit adjustment. MC5 PC (Pentium) control system with a color TFT monitor, integrated control panel, and USB data storage. Plasticizing unit Complete plasticizing unit for thermoplastics with wear-resistant coating. Screw diameter: 105 mm Backflow valve: yes Nozzle: open Clamping unit Nwedpfx Aszvm A Iohkjk Clamping force: 8500 kN / 850 t Opening force: 560 kN Mold mounting plate dimensions (H × V): 1600 × 1600 mm Distance between tie bars (H × V): 1140 × 1140 mm Mold opening stroke: 1600 mm Minimum/maximum mold height: 500–1100 mm Maximum distance between platens: 2100 mm Ejector stroke: 300 mm Ejector force, front/rear: 200 / 100 kN Injection unit 8100 Screw diameter: 105 mm Maximum injection pressure: 1778 bar Injection volume: 4546 cm³ Injection weight for PS: 4137 g Injection rate: 805 cm³/s Screw speed, standard / optional: 121 / 153 rpm Electro-hydraulic equipment Servo drive for the hydraulic system: YES Rated power of the pump motor: 110 kW Number of dry cycles according to EUROMAP 6: 965 cycles/h Oil tank capacity: 1500 l Dimensions and weight Machine dimensions (L × W × H): 10.81 × 2.92 × 2.57 m Net weight with control cabinet: 43.5 t

Condition: good (used), Year of construction: 1997, Krauss-Maffei KM 110-520 C1 Year: 1997 Screw diameter: 45 mm Clamping force: 110 tons Tie bar distance: 47x47 cm Shot weight: 234 g Nodjyh Rymjpfx Ahkjwk

Condition: excellent (used), Year of construction: 2014, KRAUSS-MAFFEI KM 420-4300 CX injection molding machine Year of manufacture: 2014 Control system: MC6 Plasticizing unit: 4300 Screw diameter: 90 mm Control system MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Integrated 19-inch control panel with a color touchscreen, LED backlight, and visualization of all running processes via ProcessDesigner. Plasticizing unit Complete plasticizing unit for thermoplastics with abrasion-resistant design. Screw diameter: 90 mm Backflow valve: yes Nozzle: open Nozzle radius: 15 mm Nozzle orifice: 6 mm Clamping unit Clamping force: 4200 kN / 420 t Maximum mold opening force: 250 kN Dimensions of mounting plates (H × V): 1270 × 1230 mm Distance between columns (H × V): 800 × 800 mm Maximum mold opening stroke: 1020 mm Minimum mold height: 380 mm Maximum distance between plates: 1400 mm Ejector stroke: 250 mm Ejector force front / rear: 95 / 49 kN Injection unit 4300 Screw diameter: 90 mm Ls/D ratio: 20 Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Standard injection rate: 604 cm³/s Nedpezvmx Njfx Ahkjwk Injection rate with accumulator: 1909 cm³/s Standard screw speed: 195 rpm PS plasticizing rate at standard speed: 134 g/s PS plasticizing rate at increased speed: 186 g/s Nozzle clamping force: 129 kN Electrical and hydraulic system Rated power of pump motor: 90 kW Installed heater power: 44 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 2.8 s / 560 mm Oil tank capacity: 1000 l Dimensions and weight Machine dimensions (L × W × H): 7.6 × 2.5 × 2.4 m Net weight including control cabinet: 25.5 t