Condition: used, Used Alfa Laval model CT-6 "Centritherm" stainless steel contact parts centrifugal evaporation unit. Approximate water evaporation capacity 800 kg/hr. Evaporation unit consists of: 1) CT-6 Centritherm evaporator mounted on skid 2) Alfa Laval model P2-HL plate heat exchanger/condenser 3) Control panel Fob Em Selc Dwvo Inegb 4) Duplex filter 5) Feed pump model 6) Concentrate pump model 7) Condensate centrifugal pump 8) Vacuum pump Pompe Travaini model TRMB 40-150/F 9) Flash cooler 10) Piping 11) Tools for lifting cones and the bowl 12) Original technical documentation in German.

Year of construction: 2015, Condition: excellent (used), Functionality: fully functional, total height: 480 mm, base plate length: 1,020 mm, floor slab width: 450 mm, 2 pieces Horizontal, cross-split volute casing pump in process design, with radial impeller, single-entry, single-stage, Manufacturer: KSB Model: MCPK 40-25-160 Year of manufacture: 2015 Shaft seal: Double-acting Burgmann mechanical seal with sealing water connection and flow meter Impeller diameter: 169 mm Pump speed: 2950 rpm !!! ATTENTION !!! Operating parameters are specified on the type plate. Not the actual flow rate at the best point !!!! I have stored 2 characteristic curves as a photo. Photo 11: Best point Photo 12: Operating parameters from last application Flow rate: 6.9 m³/h Delivery head: 33.0 meters Shaft power: 1.73 kW Efficiency: 35.87 % NPSH: 2.17 Data operating point for last application approx. Flow rate: 2.2 m³/h Delivery head: 37.0 meters Shaft power: 1.27 kW Efficiency: 18.07 % NPSH: 1.99 Materials: Feb Ejfyn Rpjm S Insgb Volute casing: Noridur 1.4593 Housing cover: Noridur 1.4593 Shaft: C 45+N Impeller: Noridur 1.4593 Other parts in contact with the medium: 1.4517 Electric motor: 5.5 kW Energy efficiency. IE 2 Voltage: 400/ 690 Volt Speed: 2950 rpm The material 1.4593 Noridur is very well suited for: - Chemical and process engineering industry - Sulphuric and phosphoric acid - Salt extraction and processing - Petrochemical industry Bmg9kmu7ug - Coking plants - Textile and pulp industry - Food and sugar industry - Mining/coal mining and extraction - Flue gas desulphurization plants - Acidic, chloride-containing washing suspensions - Acidic process water - Waste water treatment/sewage treatment plants - Offshore and marine technology

Condition: good (used), Year of construction: 2014, Functionality: fully functional, machine/vehicle number: PT 200 HL – D3000, SUBJECT OF CHARGE AND TECHNICAL DESCRIPTION: 1 pc Pressure tank 200 hl (PT 200 HL) - D3000 Upright, cylindrical container with arched bottom and lid (28011), resting on legs. Material 1.4301 Diameter 3000 mm Height of the cylindrical part 2150 mm, Unisolated, no duplicate 20710 L total volume operating pressure 3 bar Design regulation EN13445/68/EU Internal surface ground 2B, internal butt and corner welds ground Ra 0.8, butt welds bordered 50 mm wide The outer surface is pickled and passivated, the outer butt welds are ground to Ra0.8, bordered in a width of 50 mm Equipment of the tank according to the technical documentation Safety valve Vacuum valve CIP washing head DN32 Status sign Sampling cock DN8 Manhole Thermometer well Fgjb Em Sou D Hu Ij Insb Hanging eye 3 pcs Tubular leg, 4 pcs Bottom inlet/outlet DN32 terminated with flap DN32 sanitation inlet Documentation: 1 x in Czech language, pressure vessel passport Offer price for 1/piece.....15.999,- Euro + VAT Offer price for 2/piece.....29.999,- Euro + VAT

Condition: used, Dosing system mixing system Transitube 2 storage bunkers with dosing screws Mixing unit mixing screw with outlet Fjbotmprbs Em S Insgb Fitted with control cabinet (operation unknown) See our other advertisements VMA Wekerom

Condition: good (used), WILL + HAHNENSTEIN E - TEB - 2 Electric heating chamber Heating output: 8.5 kW Operating temperature: max. 150 ºC Fjb Emouf A R Sj S Inegb Internal chamber dimensions: 139 x 92 x 159 cm Manufacturer: Will+Hahnenstein Year of construction: 2010 Floor Space: 175 x 130 x 220 cm

Condition: as good as new (ex-display), operating hours: 50 h, Uhlmann thermoform packaging system UPS 4 ETX for processing PVC forming film and aluminum lidding film Basic machine in modular technology and balcony construction, with 12 modules: - Molding film holder with 2 pneumatic clamping shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and gluing table for shaped film - Shaped film unwinding, clocked - 3-zone contact heating: - 6 heating circuits, individually adjustable - Simultaneous heating of min. 3 feeds - Heating plates during machine stop automatic opening - Forming station with 4-column lifting table guide - Filling section, length 1,360 mm - Safety flap on the filling section Cover film unwinding on operating side with pneumatic expansion shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4 columns lifting table guide: - Integrated overload protection - Automatic lifting of the upper sealing sealing tool when the machine stops - Free module for the installation of an additional station - Clamping gripper feed - Punching station with blister lowering - Waste cutter with integrated motorized transport of the punching grid - Smoothing device - ET/DT perforating station - Monitoring of the compressed air supply with machine stop when the minimum the minimum value - Visio Scan - Electrically interlocked safety doors Fsb Eotndpzom S Inegb - Quick format change due to - plug-in format parts - Plug-in connections for cooling water supply - Main drive with frequency-controlled three-phase motor geared motor - Switch cabinet at the rear of the machine, swivel-mounted Paccontrol operating control - 10.4" TFT color display with 640x480 pixel resolution - Processor 68C030 - OS9 2.9 operating system - 2 MB SRAM, 2 MB Flash, 16 MB DRAM - SRAM card reader - IBM standard membrane keyboard - Centronics interface for external printer - PS2 interface for external keyboard - VGA interface for external monitor - Serial interface for diagnostic purposes - Arcnet interface - 8 serial interfaces for connecting devices Integrated shift register ISR Rejection of individual blister rows, e.g. overheated film in the heating station, products in the sealing station, etc. Machine control: Memory-programmable sequence control in modular design: - B&R - PLC control - Bus system with modules for CPU, inputs, outputs, temperature controller, cam controller, etc. - External program memory Technical data UPS 4 ETX: - Number of cycles: - ET range: min./max. : 15/ 50 T/min. depending on film quality, feed and format design - Format range: min./max. feed in filling area : 64/226 mm min./max. film width : 100/300 mm min./max. punching width : 28/284 mm max. drawing depth : 12 mm - Compressed air: - Inlet pressure: approx. 6 - 8 bar 4 Simtap feeders

Year of construction: 2012, Condition: used, Used Pharmix model HHR1200 stainless steel (AISI 316L) double cone jacketed vacuum dryer blender. Approximately 1200 litre total capacity. Internal rated -1/0 bar design pressure at 60°C. Has external stainless steel (AISI 304) jacket 260 litre capacity rated 3 bar design pressure at 70°C. Includes internal stainless steel vacuum pipe. Cone has intlet with bolted lid and bottom discharge with manual valve. Driven through gearbox by 2.2 kW, 400 V, 1420 rpm, 50 Hz el. motor, rotations of dryer are 2.2 rpm. Gearbox is Ex II 2D c 125°C rated / motor II2 D Ex tD A21 T 120°C. Mounted on mild steel support stands. Overall dimensions are 4015 mm (length) x 3975 mm (width) x 3300 mm (height - includes stairs), weight 3430 kg. Unit is dismantled - attached photos are from installation. Fgob Eslc Dv Usm S Injb

Year of construction: 1987, Condition: excellent (used), 1 piece chemical standard centrifugal pump with very few operating hours. Pump is suitable for acid condensate and aggressive acids. Also suitable for salt water! Manufacturer: Sulzer Model: ZA 200-4500 Material: Duplex 9.4460 / Noridur 1.4593 Delivery volume: 250m³/h Head: 27 meters at 980 rpm Shaft power: 42 kW Motor power: 75 kW NPSH: 1.6 Speed: 980 rpm Year of construction: 1987 Pump speed of 1480 rpm is also possible! Delivery rate approx. at 1480 rpm (information without guarantee) Delivery rate: 430m³/h Delivery head: 62 meters Shaft power: 88 kW Shut-off valves and piping in stainless steel are also available The material 1.4593 Noridur is very well suited for - Chemical and process engineering industry - Sulphuric and phosphoric acid - Salt extraction and processing - Petrochemical industry Bmg9kmu7ug - Coking plants - Textile and pulp industry - Food and sugar industry - Mining/coal mining and extraction - Flue gas desulphurization plants - Acidic, chloride-containing washing suspensions - Acidic process water - Waste water treatment/sewage treatment plants Foboh S Nz So Em S Insgb - Offshore and marine technology

Condition: good (used), Year of construction: 1994, Functionality: fully functional, space requirement height: 2,440 mm, overall weight: 1,480 kg, pressure: 2 bar, total width: 1,300 mm, total length: 1,850 mm, total height: 1,650 mm, filter area: 0.75 m², operating temperature: 200 °C, 0.75 m3 enameled steel 760 liter capacity Filter chute Suction chute Nutsche Pressure filter Estrella AG Year of construction: 1994 Diameter: 1000 mm Filter surface: 0.75 m2 Permissible operating pressure: -1/+2 bar Permissible operating temperature: -10/+200 °C Supporting structure: upright on feet with substructure Opening: hydraulic opening aid Febju U Afue Em S Inegb Enamel quality: color blue Enamel 2000 Estrella Total volume: 760 liters Total height open: 2440 mm Height closed: 1590 mm L x W 2000 x 1300 mm

Condition: good (used), Used stainless steel container Last use: Pharmacy Item number: 10780 Volume: approx. 150 liters Type: Upright on 4 castors Height of feet: 550mm Material (wetted parts): 1.4301 / AISI304 Design: Single-walled Opening: 960 x 600mm Tank dimensions: Total height: 830mm Total width: 650mm Total length: 1110mm Cylindrical height: 250mm Materials: Interior: 1.4301 / AISI 304 External parts: 1.4301 / AISI 304 Equipment: 1 x handle Equipment: without spout, with one opening, with one ball valve Fgobou T Hw Ej Em S Ineb

Condition: excellent (used), OCS HC Checkweigher up to 3.750 g This machine is designed to check-weigh cans or similar objects against pre-set parameters. The Checkweigher has a weighing range of between 20 and 3.750 g and operates left to right. Infeed conveyor: 290 x 400 mm Weighing belts: 290 x 400 mm Fgsb Em S Ijvdrdqsneb Discharge conveyor: 290 x 500 mm from left to right Manufacturer: OCS Wipotec Year of construction: 2004 Floor Space: 135 x 100 x 210 cm

Condition: good (used), Functionality: fully functional, For sale is a used water treatment system from ELIX type Essential 10 Description according to the manufacturer's website: Elix® Essential systems are suitable for laboratories that require an easy-to-use, economical solution for a constant and reliable supply of type 2 water. The patented Elix® electrodeionization technology, in combination with other coordinated water treatment technologies such as pre-treatment, reverse osmosis and irradiation with a bactericidal UV lamp (for Elix® Essential UV systems), produces type 2 pure water of consistently high and reliable quality. Thanks to Elix® modular technology, these systems do not require resin changes and therefore have low and predictable operating costs. Water quality: Type 2 Production volume: 200l/day Fgob Eeu Tpbtom S Insb

Condition: used, TECHNICAL DETAILS - Max. heating bath temperature : 99.9 [°C] Fgeb Emsu D I H Ej S Inob - Heating bath model : water/liquid bath - Heating bath volume : 14 [l] - Cooling : No

Year of construction: 2010, Condition: excellent (used), Functionality: fully functional, overall weight: 925 kg, drive type: Elektro, base plate length: 1,620 mm, floor slab width: 650 mm, product height (max.): 790 mm, rotational speed (max.): 1,465 rpm, 2 pieces Horizontal, cross-split volute casing pump in process design, with radial impeller, single-flow, single-stage, !!! Attention Data in the nameplate is the required operating point in the last application, it is not the best point of the pump !!! Manufacturer: KSB Model: CPKN-C3.1 100-400 Year of manufacture: 2010 Last pumped medium: + water / 0.01%SO2/pH=2 + clean water Chemically and mechanically non-aggressive to materials Best flow rate: 120m³/h Delivery head best point: 52 meters (5.2 bar) Efficiency Best point: 67 % Flow rate operating point: 89.5m³/h Head at operating point: 55 meters (5.5 bar) Efficiency operating point: 63.5 % Pump speed: 1465 rpm Shaft seal: Double-acting GLRD Manufacturer: Burgmann Type: CARTEX-DN2/53-EX Material code: Q1Q1KMQ1/G1+BQ1VMG Operating mode: CB cartridge double GLRD with barrier pressurization Impeller type: closed multi-channel impeller Fgob Emefyn Rhj S Inob Impeller diameter 396.0 mm Bearing bracket design: reinforced (heavy) Bearing bracket size: UP04 Bearing seal: Shaft seal ring Bearing type: Roller bearing Lubrication type: Oil on drive side Lubricant monitoring: Oil level regulator Materials: Pump housing: Duplex steel Noridur 1.4593 (9.4460) Wearing wall: Duplex steel Noridur 1.4593 (9.4460) Pressure cover: Duplex steel Noridur 1.4593 (9.4460) Shaft: Heat-treated steel C45+N Impeller: Duplex steel Noridur 1.4593 (9.4460) Bearing bracket lantern: Gray cast iron JL1040 Shaft sleeve: Duplex steel 1.4539 Nominal size of suction nozzle: DN 125 Discharge connection Nominal diameter: DN 100 Nominal pressure suction PN 10 Nominal pressure pressure PN 10 Coupling manufacturer: Flender Coupling type: Eupex NH with intermediate sleeve Base plate: Gray cast iron Motor manufacturer: Siemens 1LG6 207 Efficiency class: IE 1 Motor speed: 1476 1/min Frequency: 50 Hz Rated voltage: 400 V Rated motor power P2: 30 kW Shaft power operating point: 20.39 kW Shaft power best point: 24 kW Thermal class: F Motor protection class: IP56 Cosphi: 0.85 KSB mark: S6 according to KSB AN 1865-2 Surface preparation: Blasting, standard purity grade SA 2 1/2 Primer: 2-component epoxy zinc dust Intermediate coat: 2-component epoxy resin micaceous iron oxide Top coat: 2-component polyurethane (PUR) Color: Ultramarine blue (RAL 5002) KSB blue Total layer thickness approx. 260 µm The material 1.4593 Noridur is very well suited for - Chemical and process engineering industry - Sulphuric and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coking plants - Textile and pulp industry - Food and sugar industry - Mining/coal mining and extraction - Flue gas desulphurization plants - Acidic, chloride-containing washing suspensions - Acidic process water - Waste water treatment/sewage treatment plants - Offshore and marine technology

Condition: good (used), Functionality: not functional, space requirement length: 8,000 mm, space requirement width: 4,000 mm, space requirement height: 5,000 mm, overall weight: 8,000 kg, total height: 2,000 mm, total width: 2,100 mm, total length: 5,000 mm, type of input current: three-phase, input voltage: 400 V, power: 22 kW (29.91 HP), shaft diameter: 127 mm, type of motor: three-phase motor, DRAIS" TYPE S8000 double ribbon mixer - Tank capacity approx. 8000 L. Fsb Em S Iou D Ihvensgb Tank: stainless steel construction L x W x H = 3350 x 1800 x 1800 mm Machine sold without motorization but with partial coupling to keep or change Recommended gear motor not supplied 3 x 400 V- 22 KW - 10 rpm - Torque 60940 Nm Central drain at 500 mm Sealing by stuffing box Shaft diameter 150 mm Stainless steel cover Product feed via trapdoor 500 x 300 mm - 4 nozzles diameter 80 mm + 1 nozzles diameter 100 mm and two 150 mm diameter lights Overall dimensions L x W x H = 5000 x 2100 x 2000 mm approx.

Condition: new, Factory new electrically heated stainless steel agitator tank Item number: EBB150RWAD Volume: 152L Approx. dimensions: Ø 660mm x cyl. height 625mm total height: 910mm Material: 1.4301 stainless steel V2A Surface: inside and outside matt grinded Welding seams ground max. operating temperature: 110°C Operating pressure tank: ATM -standing design on rollers -upper bottom: central traverse for agitator with two hinged lid halves -Lower bottom: Flat bottom with side outlet DN50 DIN11851 and disc valve -Stirrer flange connection on the upper bottom -2x handle for pushing -1x type plate Heating system: Indirect heating Double jacket around the tank with glycerine filling as heat transfer medium. Heating is done by electric radiator in the double jacket. Power: 9KW Operating voltage: 3PH 400V Incl. supply line 16A CEE plug Centric agitator: Slow running anchor agitator with wall scrapers Fjb Em Seh Hxxfj Injgb Type: SRTGMK/0,37-9,5 Make: Schwarzer Rührtechnik GmbH Power: 0,37KW Speed: 0-9,5UPM Operating voltage: 1PH 230V Material in contact with product: 1.4301 stainless steel -Gearbox and motor in latest aluminum technology, make Getriebebau NORD -Gearbox with food-approved oil filling "Klüber". -Massive agitator shaft attached to the agitator motor with sleeve coupling, removable -Stirrer shaft balanced for concentricity in the speed range -1Piece space-gripping anchor agitator in the tank, weld seams ground, arranged close to the wall -2 Teflon wall wipers in the cyl. area, one at the bottom -stainless steel [...]

Condition: excellent (used), Year of construction: 1999, GLATT GPCG 120 Fluidbed Dryer/Spray Granulator This universally applicable plant is designed for drying, moistening and spray granulation with batch sizes up to 420 liters. Discharging is done by means of a Glatt EL 300 lifting and discharging device with Glatt GS screening machine. Fob Em S Ijvdrcaenogb Accessories: Mobile weighing Mettler Toledo and WIP plant. Manufacturer: Glatt Year of construction: 1999

Condition: used, Functionality: fully functional, Brogtec METEOR homogenizer High performance colloid mill ATEX Fgebjr Hquhs Em S Insb Colloid mill in pharmaceutical design, mobile on a stainless steel trolley. Electric cabinet on the trolley with speed control via frequency converter, on/off switch. Version with mechanical seal and sealing pressure vessel for pressure maintenance and cooling of the sealing medium in the sealing circuit of the mechanical seal. VAC/48-62 Hz, 400 V Brogtec METEOR High performance colloid mill - homogenizer ATEX Colloid mill in pharmaceutical design mobile on a stainless steel trolley. Electrical cabinet on the trolley with speed control via frequency converter, on-off switch. Design with mechanical seal and barrier pressure vessel for pressure maintenance and cooling of the barrier medium in the sealing circuit of the mechanical seal. VAC/48-62 Hz, 400 V

Condition: used, TECHNICAL DETAILS - Max. heating bath temperature : 99.9 [°C] - Heating bath model : water/liquid bath - Heating bath volume : 14 [l] - Cooling : No Fgsbsu D I Hxj Em S Inob

Year of construction: 2009, Condition: refurbished (used), Functionality: fully functional, 1 piece liquid ring vacuum pump. Please read the description carefully to the end !!! The pump is not suitable for: Water, food industry and non-corrosive media. For these media, cheaper materials such as 1.4408 or 1.4571 are more suitable. The pump is made of the special material Alloy 59 !!! This alloy is used when the corrosion resistance of conventional chromium-nickel steels is no longer sufficient. Especially when chloride-induced pitting and crevice corrosion and stress corrosion cracking are a problem. Alloy 59 is used for: Environmental engineering, chemical industry (chemical processes with oxidizing and reducing acids, resistance to moist chlorine gas) and waste incineration plants. 2.4605 is mainly used in the chemical industry, the pulp and paper industry and in flue gas desulphurization plants. Fgjb Em Soigqutj Injb Excellent resistance to mineral acids such as nitric, phosphoric, sulphuric and hydrochloric acid and in particular to sulphuric/hydrochloric acid mixtures Typical applications are -plant components for organic chemistry processes with chloride-containing media, especially when chloride-based catalysts are used -Multipurpose plants in the chemical industry -Plant components in the fine chemicals and pharmaceutical industries scrubbers, heat exchangers, dampers, fans and agitators for flue gas desulphurization plants (FGD) in fossil-fired power plants and waste incineration plants -SO2 scrubbers for marine diesel engines -components for seawater and concentrated brines -equipment and components for geothermal and sour gas applications -Reactors for acetic acid and acetic anhydride -Reactors for hydrofluoric acid -sulphuric acid coolers -Pipelines in geothermal power plants -Components in flue gas desulphurization plants Manufacturer: Busch Type: LC 0220 A ZZO XX ZZ Volume flow: 195 m³/h Motor power: 7.5 kW Voltage: 400/ 690 Volt Speed: 1440 rpm Vacuum: 33 mbar Material: 2.4605 ( Alloy 59 ) NiCr23Mo16Al All ball bearings new, mechanical seal refurbished by specialist company. Weight: 121 kg Dimensions: Length 960mm, width 370mm, height 370mm Connection: DN 50 ( 2")

Condition: good (used), Functionality: fully functional, filter area: 0.836 m², overall weight: 274 kg, The Contherm scraped surface heat exchanger is an ideal solution for processing viscous, heat-sensitive, sticky or particulate products, used in industries such as food, chemical, pharmaceutical and cosmetics. This equipment is designed for a wide range of processes, including heating, cooling, pasteurization, sterilization, crystallization and phase change. Made of stainless steel AISI 316L. Feb Emsuz Uymj S Insgb The Contherm is mounted vertically and is equipped with a rotor driven by an electric motor, with scraper blades ensuring uniform heat transfer. Tangential inlets and outlets allow smoother handling of the product, preserving its integrity. Additionally, the equipment is easy to maintain, as the rotor and blades can be lowered for inspection. It is highly efficient, capable of working with different heat transfer media such as steam, water or liquid refrigerants. Ideal for optimizing processes with complex products, the Contherm offers reliable performance and adaptability to different applications. Characteristics: Model: 6x9 Heat exchange surface: 0,836 m2 Weight: 274 Kg 16 units available that are part of a complete rice pudding manufacturing line

Condition: good (used), This is a continuously operating machine for the granulation of wet or moistened materials. The machine has an output of between 100 and 500 kg per hour, depending on the product Additional rollers with alternative bore diameters can be obtained from the manufacturers. Manufacturer: Alexanderwerk Floor Space: 120 x 100 x 180 cm Fgjb Em Sou T Ev Ho Injb Downloads

Condition: used, TECHNICAL DETAILS Fgsb Em S Isug U Rmsneb - Magnification : W 10 x 21 B

Year of construction: 1997, Condition: refurbished (used), 2 pieces volute casing pump in process design 1 piece completely overhauled, new ball bearings for pump and motor. Mechanical seal overhauled by specialist company. All seals new. Flow rate: 6 m³/h Delivery head: 25 m Pump speed: 1440 1/min Shaft seal: double-acting mechanical seal Manufacturer: Burgmann HRZ 13754-00 SIC/SIC/-CAR/SIC-VITON Impeller type: closed two-channel impeller Impeller diameter: 277mm Bearing type: roller bearing Impeller side: 1x NU411 Drive side: 2x 7311 Lubrication type drive end oil Lubricant monitoring Oil level controller Materials: Pump housing: Duplex steel Noridur 1.4593 (9.4460) Wear plate: Duplex steel Noridur 1.4593 (9.4460) Pressure cover: Duplex steel Noridur 1.4593 (9.4460) Shaft: Heat-treated steel C45+N Impeller: Duplex steel Noridur 1.4593 (9.4460) Bearing bracket lantern: Cast iron EN-GJL-250 Shaft sleeve: Duplex steel 1.4462 Nominal size of suction nozzle: DN 80 Discharge connection Nominal diameter: DN 40 Nominal pressure suction PN 10 Nominal pressure pressure PN 10 Coupling manufacturer: Flender Coupling type: Eupex NH with intermediate sleeve Base plate: gray cast iron Motor manufacturer: AEG AM 132 Efficiency class: IE 0 Motor speed: 1476 1/min Frequency: 50 Hz Rated voltage: 400 V Rated motor power: P2 7.50 kW Thermal class: F Motor protection class: IP55 Cosphi: 0.82 Dimensions: Length: 1270 mm Width: 550 mm Height: 570 mm Weight: 300 kg The material 1.4593 Noridur is very well suited for - Chemical and process engineering industry - Sulphuric and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coking plants - Textile and pulp industry Fgeb Esiuznuom S Inob - Food and sugar industry - Mining/coal mining and extraction - Flue gas desulphurization plants - Acidic, chloride-containing washing suspensions - Acidic process water - Waste water treatment/sewage treatment plants - Offshore and marine technology

Condition: excellent (used), This machine is suitable for capping bottles etc. at speeds of up to 4,200 objects per minute. The machine can handle bottles with a diameter of 18 - 90 mm. Fgsb Emsqxc Ekj S Inob