Used machining centers (vertical) X-axis travel 400-599mm for sale (214)

Condition: used, Year of construction: 2017, x-travel 560 mm y-travel 560 mm z-travel 660 mm Hfsdpfxoxbtm Rj Ag Dsr control Siemens Sinumerik Celos weight of the machine ca. 9240 kg

Condition: ready for operation (used), Year of construction: 2007, operating hours: 66,963 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, table load: 40 kg, rotational speed (max.): 15,000 rpm, TECHNICAL DETAILS B-axis: +110° to -110° C-axis: 360° Table indexing B and C axes: 0.001° Workpiece Max. workpiece size: Ø 250 × height 250 mm Max. table load: 40 kg Pallet System Pallet size: Ø 130 mm Max. workpiece size on pallet: Ø 250 × height 250 mm Max. pallet load: 40 kg Pallet interface: Capto C6 Spindle Standard speed range: 50 - 15,000 rpm Spindle taper: BT40 JIS B 6339 Big+ Spindle motor power with FANUC drive: 7.5 / 5.5 kW Max. torque: 65.1 Nm at 1,100 rpm Rapid Traverse and Feed Rates Rapid traverse X, Y, Z axes: 50,000 mm/min Rapid traverse B-axis: 30 rpm Rapid traverse C-axis: 50 rpm Feed rate X, Y, Z axes: 1…50,000 mm/min Feed rate B-axis: 30 rpm Feed rate C-axis: 50 rpm Tool Changer Max. tool weight: 10 kg Max. tool diameter (all stations occupied): Ø96 mm Max. tool diameter (with adjacent stations empty): Ø150 mm Max. tool length: 300 mm Guideways Axis guideways: Roller guides Lubrication: Permanent grease lubrication Ball screws X, Y, Z axes Ø: 36 mm Pitch: 16 mm Axis Drives Motor rating X, Y, Z axes: 4.5 / 4.5 / 5.5 kW Motor rating B, C axes: 4.5 / 2.5 kW Axial force X, Y, Z axes: kN (value not specified) MACHINE DETAILS Control: MATSUURA G-Tech 30i (FANUC 30i MA) Serial number: SN17224 Weight & Dimensions Hfsdpfx Aswx Iugeg Dsr Standard machine weight: 7,800 kg Machine with PC-2: 8,600 kg Machine height above floor: 2,705 mm Width: 2,281 mm Depth: 3,665 mm Electrical Connections Total connected load (standard machine): 32 kVA Supply voltage: 3 x 400 V, 50 Hz Compressed air connection: 5.5-9.5 bar EQUIPMENT 5-axis simultaneous control Expanded tool magazine capacity to 40 tool stations Pallet changer with 2 pallets, 130 mm diameter Direct path measuring system (Heidenhain) in X, Y, and Z axes, pressurized with sealing air KNOLL coolant system: 1 scraper or hinge belt chip conveyor with lift pump and chip discharge to operator side (Type: 500 K-1/10, year of manufacture 2010) 1 through-spindle coolant supply with KTS25-50T coolant pump, capacity 31 l/min at 70 bar, 5.5 kW, three-stage adjustable pressure 1 external coolant with coolant pump, capacity 100 l/min at 1.4 bar 1 coolant flush with coolant pump, capacity 100 l/min at 1.4 bar 1 compact filter KF200, filtration capacity 200 l/min 2 auger-type conveyors in the machine RENISHAW OMP 60 probing system for automatic workpiece zero-point setting and measurement, can be changed via tool changer OMRON pressure transducer for tool length measurement and tool breakage monitoring

Condition: good (used), Year of construction: 2009, For sale: Chiron FZ 08W Magnum High Speed, a high-speed vertical CNC machining center, manufactured in 2009 and equipped with a Siemens 840D control. The machine is located in Armilla, Spain, and is in perfect working condition, ideal for precision machining and series production. Main Features: Brand / Model: Chiron FZ 08W Magnum High Speed Year of Manufacture: 2009 CNC Control: Siemens 840D (PCU 50 / NCU 572.5, 6 axes, 1 channel) Travel Distances: X-axis: 450 mm Y-axis: 270 mm Z-axis: 310 mm Spindle Speed: Up to 15,000 rpm Tool Holder: HSK-A 40 DIN 69893 Spindle Power: 7.2 kW (25% duty cycle) / 2.2 kW (100% duty cycle) Tool Magazine: 24 positions with automatic tool changer Hfsdpfxsv R Hlie Ag Dor Tool Change Time (chip-to-chip): ~1.9 s Cooling System: Internal high-pressure cooling (up to 150 bar) High-pressure pump with dual-switchable 60 µm filter Coolant Filtration System: Automatic continuous paper filter (50 µm) 500-liter coolant tank Chip Conveyor: Chain conveyor with 100-liter chip container Automatic Loading Doors Table Size: 2x660x350 mm Maximum Table Load: 100 kg per side Rapid Traverse Speed: Up to 75 m/min (X, Y, Z) Axis Acceleration: X-axis: 1 g Y-axis: 1.5 g Z-axis: 2 g Additional Features: High-speed package (increased acceleration and faster tool changes) 0/180° Work Area Switching System with intermediate partition 3D Touch Probe Renishaw TS 27R Three-color signal light on the splash guard 230V power socket on the control panel Connection for portable handwheel ("Mini Handwheel") Integrated electrical cabinet cooling Additional Spare Parts Included: This machine comes with a spare parts package from another disassembled Chiron FZ 08W, making maintenance and repairs easier. The package includes: Complete Peiseler 180° table Complete tool changer system with motor Spindle head (without motor) Operator panel keyboards Doors Various electrical components Power supply for servo amplifiers 2 servo amplifiers Chip conveyor 2 spare motors Condition & Delivery: Machine is fully operational and ready for production. Available for testing at our facility. Regular maintenance performed. Video of the machine in operation available upon request. Location & Shipping: Location: Armilla, Spain Shipping and commissioning can be arranged upon agreement. For more information, contact us via phone or email. We are available to answer any questions and provide additional technical details.

Condition: used, As-new CNC Vertical Machining Center, Milling Machine VMC, BAZ, HSC Milling, Machining Center TAIKAN B540Z Serial No. 1171009 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Travel range for working area X: 488 mm, Y: 400 mm, Z: 230 mm X-axis travel for tool change position X: 540 mm Table size 520 x 400 mm Spindle taper ISO 25 Distance spindle nose - table 165 - 395 mm Max. spindle speed 36,000 rpm, infinitely variable Feed rate 0 to 10,000 mm/min Rapid traverse 15 m/min Table load capacity 200 kg Max. tool length 120 mm Max. tool diameter 80 mm Max. tool weight 0.8 kg Tool change time approx. 10 sec. Hfodpfew Ed U Nox Ag Dsr Axis drives 0.8 kW each Spindle drive 3.5 kW at 100% duty cycle Electrical connection 400 Volt, 50 Hz, 7.5 kW CNC path control SIEMENS Sinumerik 828 D Basic - Software: NCU V04.05+SP06+HF01 - Interfaces: LAN, USB and CF-Card - Measuring system for tool setting: METROL tool sensor - Vertical milling spindle = high-frequency spindle with liquid cooling and external recooling unit - Tool changer with 13 tool stations - Electronic handwheel - Coolant system - Protective enclosure with sliding door - Central lubrication - incl. 10 tool holders ISO 25 with ER20 collet chuck and a set of collets Transport dimensions (L x W x H): 1800 x 1500 x 2300 mm Weight: 2,900 kg Excellent condition – as new Machine comes from a showroom with very few operating hours.

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : SK 40 - Spindle power : 12 [kW] - Spindle speeds : 12.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 510 x 510 x 460 [mm] A ROTARY AXIS - Travel : [°] - Indexing precision : 0,001 [°] Hodpsuhbr Hjfx Ag Dofr B ROTARY AXIS - Travel : 360 [°] - Indexing precision : 0,001 [°] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 40 TABLE - Table dimensions : 400 x 400 [mm] - Maximum weight upon table : 300 [kg] - Max. turning diameter : 500 [mm] - Max. machining height : 405 [mm] PALLET CHANGER - Pallet size : 400 X 400 [mm] - Pallets number : 2 POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 50 [kVA] WEIGHT & DIMENSIONS - Machine weight : 11500 [kg] MACHINE HOURS - Number of working hours : 32763 [h] EQUIPMENT - CNC : Mazatrol PC-Fusion 640 - Interactive programming - Supports : RS232/RJ45/PCMCIA - Rigid tapping - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Spindle cooling unit - Chips conveyor : MAYFRAN - Tool probe

Condition: good (used), Year of construction: 2008, BROTHER B00 CONTROL UNIT AXIS TRAVELS: TRAVELS: Z 415 X 550 Y 400 MM. DISTANCE BETWEEN TABLE AND SPINDLE NOSE 645 MM. RAPID TRAVELS XYZ 70 M/MIN. WORKING SPEED XYZ 1-20000 MM/MIN. REPEATABILITY ERROR +/- 0.003 MM. POSITIONING ERROR 0.005 ON 300 MM. N.2 TABLES WORKING AREA 600x425 MM. PERMITTED WEIGHT 200 KG. TABLE POSITION 3.4/180° Hfedpfx Aju Spr Esg Dor SPINDLE POWER 16 KW SPEED 12000 RPM HSK TAPER A 40 RIGID TAPPING 8000 RPM MAX TOOL CHANGE TOOL MAGAZINE CAPACITY 40 PLACES TYPE OF SELECTION RANDOM TOOL CHANGE TIME 0.9 SEC. CHIP/CHIP TIME 2 SEC. OPTIONS CHIP CONVEYOR SPINDLE OVERRIDE WORK AREA LAMP ROTARY JOINT COOLANT THROUGH SPINDLE N.2 LEHMAN IV AXIS TABLES COMPLETE WITH COUNTER-SUPPORT

Condition: good (used), Year of construction: 2008, In good technical condition and fully functional. Control: Fanuc 0i-MF Plus Year of manufacture: 2008 X-axis: 510 mm Hsdpfx Aow Eil Hjg Dsfr Y-axis: 360 mm Z-axis: 300 mm Spindle taper: BT-30 Number of tools in magazine: 20 Rapid traverse (X/Y/Z): Up to 48 m/min Motor power: 5.5 kW Machine dimensions (L x W x H): 2,700 x 1,600 x 2,310 mm Machine weight: 2,000 kg Equipment: Renishaw tool probe Chuck CNC-controlled 5th axis TSUDAKOMA TN-101

Condition: used, Year of construction: 2014, Now here's a combo you don't come across every day...and we'll sell it as a full package, or split it into two lots: 2014 Quaser UX 300- 5-Axis VMC with a Halter 12 station stackable pallet pool system (this one is currently configured for Shunk Zero point pallets, but that can changed to suit) all served by a Fanuc M20i A Robot. Quasar machines (see also Hardinge Bridgeport XR series, bult by Quaser) feature a robust construction with a rigid cast iron bed and high-quality linear guides, ensuring exceptional stability and reduced vibrations during machining operations. This structural integrity is vital for maintaining tight tolerances and high surface finishes Note: Happy to separate the Halter Pallet Pool & Robot if required. Quaser Spec: Full 5-axis simultaneously machining centre with trunnion style table full C-axis 360°, B-axis +30/-120°, 15,000 RPM BBT 40 spindle, 60 tool ATC, Auto door, Blum Laser probing and touch probe system, through coolant, chilled spindle, swarf conveyor, fire suppression system, and robot integration (if required) Photographed as arrived today, more pictures to follow once set up. Specification: X-travel 410 mm Y-travel 610 mm Z-travel 500 mm 15,000 RPM face & taper mounted BBT 40 spindle with chiller and through coolant Heidenhain iTNC 530 HEIDENHAIN smart NC Table dia: 320 mm Table load: 100 kg tool change unit 60 Pos. total power requirement 35 kVA weight of the machine ca. 7,4 t dimensions of the machine ca. 4,15 x 3,8 x 3,28 m Halter LoadAssitant 12 (Offer with the Quaser UX 300 or sold separately if required.) Halter's "by Fastems" LoadAssitant-2 Mill Stacker, is a stand alone unit and is supplied with a 12 station rotary stacker table, a full enclosure, light curtains and a Fanuc M20i A robot. Currently configured for Shunk Zero Point Vices, but is easily changed to suit you. for This stand alone system is the perfect solution for batch type milling work and or lights out production and can be disconnected if not required. Speciation: Minimum workpiece (L x W) 40 mm x 40 mm Maximum square workpiece (L x W)145 mm x 145 mm Maximum rectangle workpiece (L x W)40 mm x 200 mm Height of workpiece (min - max)10 mm - 175 mm Maximum load capacity robot arm 20 kg Maximum total weight on rotating table 660 kg Maximum stacking height 375 mm Number of stacking stations (1 empty) 12 Maximum weight per station 60 kg Max. number of workpieces at workpiece height of 10 mm 407 Max. number of workpieces at workpiece height of 20 mm198 Max. number of workpieces at workpiece height of 50 mm 77 Max. number of workpieces at workpiece height of 70 mm 55 Hfodpjwzyxcjfx Ag Dsr Max. number of workpieces at workpiece height of 85 mm 44 Max. number of workpieces at workpiece height of 110 mm 33 Max. number of workpieces at workpiece height of 150 mm22

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, table width: 700 mm, table length: 500 mm, Machining center with manually rotatable and tiltable machine table! TECHNICAL DETAILS Travel distances x-axis travel: 500 mm y-axis travel: 400 mm z-axis travel: 400 mm Table Table surface: 700 x 500 mm Spindle Tool holder: 40 SK/ISO Spindle speeds: 20 – 4,500 rpm Spindle drive: 12 kW Feeds Feed rates: 5,000 mm/min Control: Heidenhain TNC 124 MACHINE DETAILS Hjdsw A Rizjpfx Ag Dsfr Total power requirement: 13 kW Machine weight: approx. 2,800 kg Space requirement: approx. 3 x 2 x 2 m

Year of construction: 2015, condition: excellent (used), VMC 3 axis AMS super dart year of production 2015 Control FANUC MACHINE CAPACITY X - Axis Travel mm 600 Y - Axis Travel mm 450 Hedpfxokvpnmj Ag Defr Z - Axis Travel mm 500 Dist. From Spindle Face To Table Top mm 235 - 735 Table size mm 900 x 450 Max. load on table kgf 400 max spindle speed 15000rpm BT30 high cooling through the spindle automatic tool changer 20 tools weight machine 4500kg with machine chip conveyor with pomps low hours machine

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK40 Hfjdpfx Asuhbuueg Dor - Spindle power : 32,5 [kW] - Spindle speeds : 40.000 [rpm] - Number of spindle hours : 1.211 [h] LINEAR AXES - Travels on X/Y/Z axes : 420 / 320 / 320 [mm] - Cutting feed rates (X/Y/Z) : 60.000 [mm/min] A ROTARY AXIS - Travel : 360 [°] - Indexing precision : 0,001 [°] - Cutting feed rate : 200 [rpm] B ROTARY AXIS - Travel : 100 [°] (+/-) - Indexing precision : 0,001 [°] - Cutting feed rate : 200 [rpm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 60 - Tool exchange time : 5 [sec] TABLE - Table dimensions : Ø 250 [mm] - Maximum weight upon table : 20 [kg] - Distance table / spindle nose (min./max.) : 40 / 360 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 35 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2.050 x 2.555 [mm] - Machine height : 2.520 [mm] - Machine weight : 5.000 [kg] MACHINE HOURS - Number of hours under power : 4873 [h] EQUIPMENT - CNC : Heidenhain iTNC530 - Electronic handwheel - Linear scales - 3 colors status lamp - Coolant tank * With washing gun - Chips conveyor - Oil mist extractor : FILTERMIST FX5002 - Spindle cooling unit - Electrical cabinet air conditioning - Tool probe : Renishaw - Workpiece probe : Renishaw - Tool-holders : 60 - Tool preparation bench

Condition: good (used), Year of construction: 2007, BROTHER B00 CONTROL UNIT AXIS TRAVELS: TRAVELS: Z 415 X 550 Y 400 MM. DISTANCE BETWEEN TABLE AND SPINDLE NOSE 645 MM. RAPID TRAVELS XYZ 70 M/MIN. WORKING SPEED XYZ 1-20000 MM/MIN. REPEATABILITY ERROR +/- 0.003 MM. POSITIONING ERROR 0.005 ON 300 MM. N.2 TABLES Hsdpfou Spqbjx Ag Defr WORKING AREA 600x425 MM. PERMITTED WEIGHT 200 KG. TABLE POSITION 3.4/180° SPINDLE POWER 16 KW SPEED 12000 RPM HSK TAPER A 40 RIGID TAPPING 8000 RPM MAX TOOL CHANGE TOOL MAGAZINE CAPACITY 40 PLACES TYPE OF SELECTION RANDOM TOOL CHANGE TIME 0.9 SEC. CHIP/CHIP TIME 2 SEC. OPTIONS CHIP CONVEYOR SPINDLE OVERRIDE WORK AREA LAMP ROTARY JOINT COOLANT THROUGH SPINDLE N.2 LEHMAN IV AXIS TABLES COMPLETE WITH COUNTER-SUPPORT

Condition: ready for operation (used), Year of construction: 2013, operating hours: 65,183 h, functionality: fully functional, machine/vehicle number: 04121, travel distance X-axis: 400 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 436 mm, spindle speed (max.): 42,000 rpm, 5-Axis Machining Center with Comprehensive Equipment! TECHNICAL DETAILS Travel distances X-axis: 400 mm Y-axis: 240 mm Z-axis: 436 mm Rapid traverse in X/Y/Z: 40 m/min Spindle Technology: Motor spindle Speed: 42,000 rpm Power: 16.6 kW Tool holder: HSK-E40 NC Swivel Rotary Table B-axis: -105° to +20° C-axis: 360° Workpiece clamping: EROWA PowerChuck Ø150 mm Tool Magazine Capacity: 60 stations Control: Heidenhain iTNC 530 MACHINE DETAILS Electrical data Rated voltage: 3×400 V Rated current: 43 A Rated power: 30 kW Frequency: 50-60 Hz Weight: 3,200 kg Operating Hours Power-on hours: 78,001 h Spindle hours: 65,183 h EQUIPMENT Chip conveyor Coolant pump Renishaw OMP 40-2 probe Automatic working area door (pneumatic) Robot interface Blow-off station inside work area Hfsdpfxowz Eals Ag Der Spindle chiller

Condition: used, Year of construction: 2007, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, OPS Ingersoll OPS 550 – HSC Milling Machine (Year of Manufacture 2007) with Tool Changer & Extraction System Manufacturer: OPS Ingersoll Funkenerosion GmbH Model: OPS 550 Year of Manufacture: 2007 Machine No.: 655029 Made in Germany The OPS Ingersoll OPS 550 is a precise and powerful high-speed milling machine (HSC) designed to meet the highest demands in toolmaking, mold making, and precision component manufacturing. Featuring an integrated tool changer, a high-performance extraction system, and a user-friendly control unit, it provides optimal conditions for efficient and highly precise work. Equipment & Features Integrated tool changer with multiple tool positions Extraction system for clean operation OPS control unit with screen, keyboard, and emergency stop Precise HSC machining for fine contours and complex shapes Robust machine construction for lasting precision Technical Specifications Hfodpfow I Sm Dex Ag Der Power supply: 400 V, 3-phase, 50 Hz Control voltage: 24 V DC Rated current: 63 A Power consumption: 55 A Year of manufacture: 2007 Errors, typographical mistakes and prior sale excepted.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Fanuc Robodrill T14iA Vertical Machining Centre for sale. 1998 model with 8,000 rpm spindle and 14 tool ATC. SPECIFICATION Traverses X Axis 500mm Y Axis 380mm Z Axis 300mm Spindle Nose to Worktable Minimum 250mm Maximum 550mm Work Table Table working surface 650 x 400mm Table loading capacity (uniform load) 200kg Table surface configuration Number of T slots 3 Width 14mm Pitch 125mm Hfedpfxsnq Dgue Ag Der Machine Dimensions Width 1550mm Depth 1900mm Height (min/max) 2067 / 2367mm Weight (approximately) 2100kg Spindle Speed range 100 – 8,000rpm Taper BT30 Feedrates Rapid traverse rate 48m/min Feedrate 1 – 30,000mm/min Toolchanger ( MAS BT30 Tools) Tool storage capacity 14 tools Tool change time – cut to cut 0.9 secs (2kg) Tool Diameter 80mm Tool Length 200mm Tool Weight 2Kg Coolant tank capacity 100 litres CNC Control System Fanuc Series 16iM Electrical Supply 415V, 3 ph , 50Hz Compressed Air Supply 5kgf/cm2 (100 litres/min) MACHINE EQUIPPED WITH:- Coolant system Lighting Enclosed guarding

Condition: used, Year of construction: 1990, x-travel 500 mm y-travel 300 mm z-travel 350 mm total power requirement 12 kW weight of the machine ca. 3800 kg Hjdpfx Ast Hwy Eeg Defr dimensions of the machine ca. m

Condition: used, TECHNICAL DETAILS - Number of axes : 7 MILLING SPINDLE Hedouhbtqepfx Ag Dsfr - Tool holder type : HSK40 - Spindle speeds : 30.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 450 x 270 x 310 [mm] - Rapid traverses rates (X/Y/Z) : 75 [m/min] B ROTARY AXIS - Travel : -20/+115 [°] - Indexing precision : 0,001 [°] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 20 A ROTARY AXIS - Max. bar diameter : 32 [mm] - Indexing precision : 0,001 [°] - Travel : 360 [°] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 17 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 1.500 x 2.600 [mm] - Machine height : 2.300 [mm] - Machine weight : 5.100 [kg] MACHINE HOURS - Number of working hours : 20.749 [h] EQUIPMENT - CNC : Fanuc 31i-A5 - Interface : USB, PCMCIA, RJ45 - Fire extinguisher * : KRAFT&BAUER FB703 * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Coolant tank - Spindle cooling unit - Oil mist extractor : HIFI FILTER - Tool probe : Renishaw TS27R - Workpiece probe : Renishaw OMP40 - Unit for 6th face machining - Collet chuck : ORTLIEB KSF 30-50 - Tool recognition through RFID scanning : BALLUFF BIS C-650 - Tool-holders : 30

Condition: used, Year of construction: 1997, x-travel 500 mm y-travel 350 mm z-travel 350 mm total power requirement 15 kW weight of the machine ca. 6 t dimensions of the machine ca. m Hsdpfx Agot Hwqde Dsfr

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK32 - Spindle power : 17 [kW] - Spindle speeds : 30-42000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 550/400/400 [mm] - Rapid traverses rates (X/Y/Z) : 30 [m/min] A ROTARY AXIS - Travel : 120 [°] (+/-) - Indexing precision : 0.0001 [°] B ROTARY AXIS - Travel : 360 [°] - Indexing precision : 0.0001 [°] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 32 TABLE - Table dimensions : 450 [mm] - Maximum weight upon table : 500 [kg] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1900X2580 [mm] - Machine height : 2260 [mm] - Machine weight : 7200 [kg] MACHINE HOURS - Number of hours under power : 12558 [h] - Number of working hours : 6602 [h] EQUIPMENT - CNC : INGERSOLL ANDRONIC - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming - Electronic handwheel - Linear scales Hsdpfx Ageuhbtkj Djfr - 3 colors status lamp - Micro-lubrification coolant - Spindle cooling unit - Tool probe : BLUM

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : HSK40 - Spindle speeds : 12.000 [rpm] - Spindle power : 7,6 [kVA] Hfodpfx Agouhbt Rj Der LINEAR AXES - Travels on X/Y/Z axes : 500 / 410 / 610 [mm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 26 - Tool exchange time : 0.7 [sec] TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 200 [kg] POWER SUPPLY - Supply voltage : 220 [V] - Total installed power : 25 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 1.640 x 2.100 [mm] - Machine height : 2.274 [mm] - Machine weight : 2.250 [kg] MACHINE HOURS - Number of working hours : 9070 [h] EQUIPMENT - CNC : BROTHER A00 - Electronic handwheel - Interface : RS232 - Workpiece probe : Renishaw OMP 60 - 4th axis : LEHMANN sans variateur - Chips conveyor - Coolant tank - Coolant through spindle : 70 [bars] - Oil mist extractor : AAF Astrosta - Electric transformer - Tool-holders : 42

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MILLING SPINDLE - Tool holder type : BT30 - Spindle power : 10.1 [kW] - Spindle speeds : 10 - 10.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 500 x 400 x 300 [mm] - Rapid traverses rates (X/Y/Z) : 50/50/50 [m/min] - Cutting feed rates (X/Y/Z) : 10/10/10 [m/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 14 - Tool exchange time : 1,7 [sec] TABLE - Table dimensions : 600 x 320 [mm] - Maximum weight upon table : 250 [kg] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 15.9 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 1,624×2,829 [mm] - Machine height : 2,608 [mm] - Machine weight : 2300 [kg] MACHINE HOURS - Number of hours under power : 1479 [h] EQUIPMENT - CNC : BROTHER CNC-B00 - Electronic handwheel Hfsdpfxsuhbuno Ag Dsr - DIVIDING UNIT * manufacturer : KITAGAWA * model : MR160LAS16 - Coolant tank - Robot interface - Automatic gate - Electric transformer - Tool-holders : 15

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : ISO40 - Spindle power : 18,5 [kW] - Spindle speeds : 12.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 560 x 430 x 510 [mm] - Rapid traverses rates (X/Y/Z) : 42 sur le X et 36 en Y/Z [m/min] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 30 TABLE - Table dimensions : 900 x 430 [mm] - Maximum weight upon table : 500 [kg] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 2062 x 2080 [mm] - Machine height : 2780 [mm] - Machine weight : 4800 [kg] MACHINE HOURS - Number of spindle hours : 3351 [h] EQUIPMENT - CNC : SMART - Interface : PCMCIA / RS232 - Interactive programming : Mazatrol - Electronic handwheel - 3 colors status lamp - Coolant tank Hjdeuhbu Iopfx Ag Dsfr * with high-pressure pump : 15 [bars] - Coolant through spindle - Chips conveyor - Workpiece probe

Condition: used, TECHNICAL DETAILS - Number of axes : 7 MILLING SPINDLE - Tool holder type : HSK40 - Spindle speeds : 30000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 450/270/310 [mm] - Rapid traverses rates (X/Y/Z) : 75 [m/min] B ROTARY AXIS - Travel : -20/+90 [°] - Indexing precision : 0.001 [°] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 40 TURNING SPINDLE - Spindle speeds : 8000 [rpm] - Max. bar diameter : 32 [mm] - C axis indexing precision : 0.001 [°] - Travel : 360 [°] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1500X2600 [mm] - Machine height : 2300 [mm] - Machine weight : 2850 [kg] MACHINE HOURS EQUIPMENT - CNC : Siemens 840 D - 3 colors status lamp Hfsdpouhbr Tjfx Ag Dor

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : BT30 - Spindle power : 11.2 [kW] - Spindle speeds : 20.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 508 x 406 x 394 [mm] - Rapid traverses rates (X/Y/Z) : 61 [m/min] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 20 TABLE - Table dimensions : 660 x 381 [mm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 2540 x 2030 [mm] - Machine height : 2490 [mm] Hjdpfx Agjuhbuzs Dofr - Machine weight : 2300 [kg] EQUIPMENT - CNC : HAAS - High-speed machining option (HSM) - Rigid tapping - DIVIDING UNIT - Coolant tank : 170 [l] - Programmable spraying nozzle - Oil mist extractor : ELBARON - Tool probe - Workpiece probe

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : BT30 - Spindle power : 2.2 / 3.7 [kW] - Spindle speeds : 15.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 300 / 250 / 250 [mm] - Rapid traverses rates (X/Y/Z) : 48 / 48 / 48 [m/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 12 - Tool exchange time : 1.6 [sec] PALLET CHANGER - Table dimensions : 400 x 250 [mm] - Pallets number : 2 - Maximum weight upon table : 100 [kg] - Pallet exchange time : 3 [sec] - Distance table / spindle nose (min./max.) : 180 - 430 [mm] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 21 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2.690 x 1.570 [mm] - Machine height : 2.420 [mm] - Machine weight : 3.300 [kg] EQUIPMENT - CNC : Fanuc Oi-MD - 3 colors status lamp - Coolant tank - Oil mist extractor - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. Hfsdpfxewdamrj Ag Djr