Used center lathes 400-499mm turning diameter over bed for sale (203)

Condition: used, Used 2-meter lathe by Cazeneuve Type: HB 500 Swinging diameter over bed: 460 mm Turning length: 2000 mm Digital readout, 2 axes Lsdpfxezgclte Anuoac

Condition: used, Year of construction: 2013, turning diameter 360 mm turning length 1000 mm swing diameter over bed slide 215 mm reus 30 - 3000 U/min spindle bore 38 mm feed längs 0,043 - 0,653 m/min Laodpfx Anezfqi Rouec total power requirement 3,5 kW weight of the machine ca. 1500 kg dimensions of the machine ca. 1900 x 900 x 1300 mm

Condition: good (used), Year of construction: 2006, Precision lathe, lathe, lead screw lathe, lead screw lathe Lasdpfx Anjzd Eqyeuec -Manufacturer: OPTIMUM, Lead screw and feed screw lathe type D320X920 -Machine bed: hardened -Turning length: 930 mm -Turning diameter over bed: 320 mm -Turning diameter without bed: 500 mm -Turning diameter over support: 180 mm -Spindle bore: Ø 40 mm -Spindle speeds: 65 - 1800 rpm -Three-jaw chuck: Ø 160 mm -Tailstock mount: MK3 -Drive: 1.5 kW -Accessories: 2x bezels, Multifix tool holder, see photos -Dimensions: 730/1590/H1310 mm -Weight: 525 kg

Condition: ready for operation (used), functionality: fully functional, Description In very good condition. Complete with digital display, chuck, quick-change tool holder, faceplate, etc. Spindle bore: 76 mm. Ledpfx Anozdrabjusac 9.3 Kw Center height: 228 mm Turning diameter over bed: 433 mm Distance between centers: 2000 mm Spindle speed: 20-1600 rpm

Condition: ready for operation (used), functionality: fully functional, Description: Max. turning diameter: 400 mm (over cross slide: 246 mm) Distance between centers: 1250 mm Bore diameter: 54 mm Motor: 7.5 kW Vario speed: 14-2500 rpm (constant vario-speed) 2-axis digital Heidenhain control Collet chuck (no collets included) 6 tool holders Fixed steady rest 4 sets of soft jaws Clamping plate Lajdpfxozdq Rro Anusc Coolant tray Asking price: 12,500 euros, excluding VAT. Tel: 0622504385

Condition: used, Year of construction: 1972, Dreh-Øüber Bett 400 mm Dreh-Øüber Support 220 mm turning length 1000 mm spindle turning speed range 12,5 - 2000 U/min spindle taper Bajonett 55022 spindle bore 47 mm feeds - longitudinal 0,07 - 4,16 mm/U feeds - cross 0.035 - 2,08 mm/U thread - mm pitch mm thread - inch 2 - 24 Gang/ inch. rapid travel - longitudinal/face 3,4 / 1,7 m/min spindle drive 11 kW power capacity 13 kW weight of the machine ca. 2,8 t dimensions of the machine ca. 2,8 x 1,2 x 1,5 m • 3-jaw chuck Ø 250 mm, Lasdpfx Anevzhhyeujc • 4-jaw chuck Ø 200 mm, • 2-axis- digital display, ANILAM WIZARD LATHE - retrofitted in 1992

Condition: used, Year of manufacture: 1980s/90s Technical data: Centre height: 185 mm Centre distance: 750 mm Turning diameter over bed: 370 mm Spindle bore: 36 mm Bed width: 250 mm Speed range: 38 - 1600 rpm Tailstock taper: MT 3 Quill stroke: 110 mm Dimensions (W x D x H), approx.: 1950 x 900 x 1200 mm Weight, approx.: 800 kg Equipment: - 3-jaw chuck, make: Röhm, ø 200 mm - Quick-change tool post with 4 holders - Bed stop - Chip tray Lsdpfxsydk Hhj Anueac

Condition: excellent (used), Swing over bed 400 mm Distance between centers 650 mm Lsdpfx Ajq Dll Denusac Spindle speeds 0-2500 rpm Misc. accessories MARCELS MASCHINEN CH

Condition: new, neu Bulgarien 42910 € 819.58 € 400 mm 750 mm 200 mm 52 mm 235 mm 320 mm 6 6 MK 4 18-98; 48-265; 144-790; 3 U/Min 80 0.015 - 0.6 mm/U 0.0075 - 0.3 mm/U 40 0.25 - 7.5 mm 120 - 4 Gänge/" 0.0625 - 1.875 235 mm 110 mm 50 mm 4 MK 100 mm 7.5 kW 1530 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection Ledjyq Stijpfx Anuoac safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.000 mm € 43.630,-

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 37910 € 724.08 € 400 mm 1000 mm 200 mm 52 mm 235 mm 320 mm 6 6 MK 12 50-2.240 1/min 80 0.015 - 0.6 mm/U 0.0075 - 0.3 mm/U 40 0.25 - 7.5 mm 120 - 4 Gänge/" 0.0625 - 1.875 480 - 16 235 mm 110 mm 50 mm 4 MK 100 mm 4 kW 2750 mm 1100 mm Lodpfoxzuu Aex Anujac 1600 mm 1540 kg driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostMultisuissewith4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle noseNr. 6 DIN 55027 four way rapid traverse device spindle dead center coolant equipment 1 pce. flange plate for lathe chuckØ 200 mm 1 adapter sleeve full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTH (PRICE ON REQUEST): turning length 750 mm

Condition: used, functionality: fully functional, spindle bore: 62 mm, turning diameter: 410 mm, center height: 205 mm, turning length: 1,500 mm, type of input current: three-phase, Parallel lathe Norwich Orion Mod. c 6241 / YZ 1500 Ledpfx Aey N T R Isnueac Centre height: 205 mm Swing over bed: 410 mm Distance between centres: 1500 mm Bar passage: 62 mm Main motor power: 5.5 HP Steadies included

Condition: new, Parallel lathe with display Fervi T075/400V3A. Monoblock cast iron base. Height of Centers 230 mm Max. diameter on Bench 460 mm Max. diameter on Carriage 270 mm Max. diameter on Slot 690 mm Tool Height 25 mm Distance between Centers 1500 mm Distance between Guides 300 mm Bar Taper CM MT7 Bar Passage 58 mm Spindle Attachment Camlock D1-8 Spindle Speed (12)25-1700 rpm Longitudinal Feeds (42) 0.031 - 1.7 mm/rev Cross Feeds (42) 0.014 - 0.784 mm/rev Metric Threads (41) 0.1 - 14 mm Inch Threads (60) 2 - 112 TPI Tailstock Spindle Stroke 130 mm Tailstock Taper CM MT4 Motor 400 V 50 Hz 5.5 kW Coolant Pump 400 V 50 Hz 90W Machine Dimensions 2750 x 1080 x 1370 mm Net Weight 2020 kg Total Dimensions 2870 x 1180 x 1570 mm Gross Weight 2200 kg Accessories Included: 3-jaw self-centering chuck Ø250 mm / D1-8 4-jaw self-centering chuck Ø300 mm / D1-8 Drive flange Ø350 mm Fixed steady rest Moving steady rest Reduction bushing CM 7 / 4 Fixed tailstock CM 4 Rotary tailstock CM 4 Thread comparator Turret guard Spindle guard Rear splash guard Quick change turret type B Lodpfevbqv Hox Anueac LED lamp Cooling system Electromechanical foot brake Bathed carriage gears oil Quick-lock tailstock carriage

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, Equipment: rotational speed infinitely variable, H. Ernault.Somua lathe CE certification Lasdjzb In Rspfx Anujc Cholet 550 model Newall DP 700 2-axis digital read-out system Completely retrofitted in 2020 Reference: E038

Condition: new, Year of construction: 2025, Bandsaw Weipert G 5025 Blade size 2715 x 27 x 0.9 mm Blade tension mechanical (manual) Cutting speed 36, 72 m/min Arm descent adjustment Lodpjwuvaiefx Anujac stepless – via a hydraulic cylinder Vice height 765 mm Minimum material length in vice 100 mm Power supply 3-phase 400 V Total power S1 100%: 1.5; S6 40%: 2.1 kW Coolant pump motor power 0.025 kW Weight 370 kg

Condition: ready for operation (used), Lathe, Lathe CA6140, used machine Overall dimensions: 2700 × 1140 × 1750 mm Power rating: 7.5 kW Swing over bed: 400 mm Swing over carriage: 210 mm Distance between centers: 1000 mm Lajdpfx Ajxacx Hsnujc Spindle speed: 16–1400 rpm (24 steps) Bed width: 400 mm Tool shank size: 25 × 25 mm

Condition: good (used), Year of construction: 2007, machine/vehicle number: 720050, Offer 26083 Technical data: - Center height / Distance between centers 210 / 1500 mm Lasdpezc Iycjfx Anujc - Maximum turning diameter over the bed / over the cross slide 420 / 270 mm - Maximum turning diameter with gap bed 640 mm - Length of the bed bridge approx. 270 mm - Spindle bore 58 mm - Taper of the tailstock quill MK 5 - Travel of the tailstock quill 180 mm - Spindle speeds 45 - 1800 rpm - Feeds: - Longitudinal 0.031 - 1.70 mm/rev - Cross 0.14 - 0.784 mm/rev - Travel of the top slide 128 mm - Travel of the cross slide 285 mm - Metric thread pitches - Inch threads - Drive 400 V / 7.5 kW - Including: - Tailstock, 3-jaw chuck, quick-change tool holder, - Digital display - Space requirement approx. W 2850 x H 1500 x D 1200 mm - Weight approx. 2000 kg

Condition: as good as new (ex-display), Year of construction: 2024, machine/vehicle number: fortlaufend, Height: 200 mm Centers: 1000 mm Turning diameter over bed: 400 mm Turning diameter over support 220 mm Spindle Bore: 52 mm Speed ​​range: 9-1600 rpm Spindle nose: Bayonet DIN 5027 KK 6 Longitudinal feeds range: 0.028 to 6.43 mm / rev (93 steps) Area cross feeds: 0.012 -2.73 mm / rev (93 steps) Metric threads: 0.5 - 224 (48 steps) Inch threads: 72 - 1 / 8 tpi (46 steps) Module pitch: 0.5 - 112 (42 steps) Diametral thread: 56 - 1 / 4 DP Quill diameter: 75 mm Spindle stroke: 150 mm Taper: Morse taper 5 Motor power: 7.5 kW Weight: 2100 kg Dimensions: 2672 x 975 x 1230 mm Accessories: Digital display for 3-axis mark SINO, 3-jaw chuck Ø 250 mm, 4-jaw faceplate chuck Ø 400 mm, fixed + follow rest, coolant system, fire wall, rapid, manual lubrication, 4-way tool operating light. Laedpo Nh Hxofx Anuec

Condition: new, Year of construction: 2026, Industrial metal lathe CORMAK TORNADO 460x2000 Main advantages: - Versatile applications : The lathe is ideal for various tasks, such as turning internal and external surfaces, cones, metric, inch, modular and DP threading, polishing, drilling and broaching. - Stable construction : The 300 mm wide cast iron bed has been hardened and precisely ground, which ensures high vibration reduction and stable working conditions even under heavy loads. - Digital precision : The device is equipped with a digital readout on two axes (longitudinal, transverse), which visualizes the exact values ​​of shifts on the screen thanks to optical measuring lines. - High-quality spindle : Reinforced bearing system in the spindle and a large passage of 82 mm guarantee optimal efficiency during work. The set also includes a 3-jaw lathe chuck with a diameter of 250 mm and a 4-jaw chuck with a diameter of 320 mm , a 5.5 kW motor. - Efficiency and productivity : The rapid longitudinal and transverse feed system on the joystick significantly shortens the machining time, and the hardened and ground gears in the spindle gear ensure durability and reliability for years. - Wide possibilities of threading : Thanks to the threading function (metric, inch, modular and DP), right and left, and the possibility of changing parameters without the need to replace gears, work becomes faster and more convenient. The range of supported threads includes, among others, metric (41) from 0.1 to 14 mm, inch (60) from 2 to 112 TPI, modular (34) from 0.1 to 7 MP and DP (50) from 4 to 112 DP - Precise counting of turns : The lathe is equipped with a threading clock, which allows for quick setting of the support in the original position after unscrewing the lead screw nut. - Ergonomics and ease of use : The intuitive control panel on the gear unit allows for quick adjustment of the spindle speed and automatic feed. - Machining of large elements : The replaceable bed bridge allows for turning large elements with a diameter of up to 690 mm and a length of 240 mm (with the bridge removed), which increases the range of the device's capabilities. Technical parameters: Turning diameter over bed ø460 mm Turning diameter over cross slide ø274 mm Turning diameter in recess diameter x width 690mm x 240mm Canine height 230mm Distance between fangs 2000mm Bed width 300mm Maximum knife cross-section 25x25mm Total travel of the cross slide 290mm Total upper slide travel 120mm Lajdpfov E Eiijx Anuec Spindle bore diameter ø82 mm Spindle tip D1-8 Spindle socket (cone) ø90 (1:20) Number of spindle speeds 12 Spindle speed range 25-2000 rpm Lead screw diameter and threads ø35mm x 6mm Inch threads Pitch Pitch 2-112 TPI (threads per inch) (60) Metric threads 0.1-14mm (41) teeth per inch tooth pitch dia. 4-112D.P. (50) Gear modules 0.1-7M.P. (34) Longitudinal feed 0.031-1.7mm/rev (42) Cross feed 0.014-0.784mm (42) Total travel of the tailstock bearing liner 120mm Tailstock bearing sleeve diameter ø60 mm Gear modules MT No. 4 Spindle drive motor 5.5kW Coolant pump motor 0.09kW Machine dimensions (LxWxH) 3220x1040x1340 mm Weight 2785 kg

Condition: good (used), turning diameter over bed 430 mm turning diameter over slide rest 220 mm turning length 1500 mm dia. of quill 80 mm quill stroke 200 mm Lodpfx Aoy Hxq Ujnusac taper in tailstock-quill MK-5 turning speeds 14 - 2240 U/min output 12,4 kVA spindle bore 60 mm weight of the machine ca. 2800 kg dimensions of the machine ca. 2900 x 1200 x 1700 mm

Condition: ready for operation (used), turning length 450 mm turning diameter over bed 245 mm turning diameter over slide rest 135 mm spindle bore 23.0 mm tool adaptor DIN 55021-4 quill: 2 MK quill travel 80.0 mm turning speeds 60 - 3000 U/min bed width 155 mm total power requirement 1.2 / 1.5 kW voltage 380 V weight of the machine ca. 340 kg. range L-W-H 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned parts The Primus series is the most compact precision sliding headstock and sliding headstock lathe (LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces. The machine is built for extremely tight tolerances. The hardened and ground machine bed ensures maximum for maximum vibration damping and durability. Lodpfxezbc Dtj Anuoac Features: - Robust lead/traction spindle lathe - 2-axis digital readout "D60-2V" - three-jaw chuck - Folding lathe chuck guard - chuck key - MULTIFIX steel holder with 3x inserts - Sliding tailstock - Control panel, front left - infinitely adjustable feeds for flat and top support - Pole-changing drive motor - machine base frame - Chip guard rear panel - Additional accessories such as collet holder Collets etc. - EMERGENCY OFF button at the front

Condition: ready for operation (used), turning length 450 mm turning diameter over bed 245 mm turning diameter over slide rest 135 mm spindle bore 23.0 mm tool adaptor DIN 55021-4 quill: 2 MK quill travel 80.0 mm turning speeds 60 - 3000 U/min bed width 155 mm total power requirement 1.2 / 1.5 kW voltage 380 V weight of the machine ca. 340 kg. range L-W-H 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned parts The Primus series is the most compact precision sliding headstock and sliding headstock lathe(LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces. The machine is built for extremely tight tolerances. The hardened and ground machine bed ensures maximum for maximum vibration damping and durability. Ledpfx Aezbc Dajnueac Features: - Robust lead/traction spindle lathe - 2-axis digital readout "D60-2V" - three-jaw chuck - Folding lathe chuck guard - chuck key - MULTIFIX steel holder with 3x inserts - Sliding tailstock - Control panel, front left - infinitely adjustable feeds for flat and top support - Pole-changing drive motor - machine base frame - Chip guard rear panel - Additional accessories such as collet holder Collets etc. - EMERGENCY OFF button at the front

Condition: like new (used), Year of construction: 2023, functionality: fully functional, spindle bore: 77 mm, turning diameter: 300 mm, turning diameter over bed slide: 470 mm, turning length: 1,120 mm, Strung CNC VOEST-ALPINE WNC 300S – Modernizat complet în 2023 cu comandă NCT nouă. Se oferă spre vânzare strung CNC profesional VOEST-ALPINE WNC 300S, un utilaj industrial robust, construit în Austria, recunoscut pentru rigiditatea structurală, precizia ridicată și fiabilitatea în exploatare. Mașina a beneficiat în anul 2023 de o modernizare majoră, fiind echipată cu un sistem de comandă CNC NCT de ultimă generație, investiție ce a depășit aproximativ 10.000 Euro doar pentru partea de control și automatizare. Noua comandă NCT transformă utilajul într-o mașină modernă, intuitivă și ușor de operat, oferind funcționalități actuale de programare, diagnosticare și control al procesului de prelucrare. Interfața este dotată cu ecran tactil generos, care permite operarea rapidă și acces facil la toate funcțiile mașinii. Pe lângă modernizarea electronică, utilajul a beneficiat de numeroase optimizări mecanice și ergonomice menite să îmbunătățească productivitatea și confortul operatorului: ușă de acces și inspecție reproiectată, cu deschidere mai mare; suprafață vitrată extinsă pentru vizibilitate excelentă asupra zonei de lucru; geam de siguranță industrial de înaltă rezistență; modificarea și optimizarea sistemului de comandă a universalului; deschidere și închidere automată a bacurilor prin pedală; îmbunătățiri ale circuitelor de automatizare și exploatare; acces mult mai facil pentru reglaje, măsurători și supravegherea procesului de prelucrare. Lodpfx Anszcy Dysusac Utilajul se află în stare tehnică foarte bună, fiind complet funcțional și pregătit pentru producție imediată. Lucrează cu toleranțe strânse și oferă stabilitate excelentă inclusiv în operații solicitante de strunjire. Poate fi verificat și testat în funcționare. Deși a fost achiziționat și instalat pentru dezvoltarea activității, mașina nu a fost exploatată în mod semnificativ din cauza lipsei comenzilor, motiv pentru care se oferă acum spre vânzare. Caracteristici tehnice principale Producător: VOEST-ALPINE (Austria) Model: WNC 300S Sistem de comandă: NCT (modernizare completă în 2023) Diametru maxim peste batiu: aproximativ 470 mm Diametru maxim peste sanie: aproximativ 345 mm Lungime de strunjire: până la 1120 mm (în funcție de configurație) Alezaj ax principal: 77 mm Turație arbore principal: până la 3000 rpm Putere motor principal: 37,5 kW Turelă portscule cu 12 poziții Posibilitate utilizare scule antrenate (în funcție de configurație) Contrapunct pentru prelucrarea pieselor lungi Construcție industrială grea pentru absorbția vibrațiilor și menținerea preciziei Greutate utilaj: aproximativ 6 tone, în funcție de echipare. Avantaje pentru cumpărător ✔ Comandă CNC NCT nouă, modernă și intuitivă ✔ Investiție recentă importantă în modernizare ✔ Precizie ridicată și funcționare stabilă ✔ Construcție industrială robustă VOEST-ALPINE ✔ Vizibilitate excelentă asupra procesului de lucru ✔ Automatizare îmbunătățită pentru manipularea universalului ✔ Costuri reduse de punere în funcțiune – utilaj pregătit de lucru ✔ Posibilitate de probă și verificare înainte de achiziție Strungul reprezintă o alegere excelentă pentru ateliere de prelucrări mecanice, producție de serie mică și medie, execuția de piese de precizie, reparații industriale și lucrări complexe de strunjire care necesită rigiditate, putere și repetabilitate ridicată.

Condition: good (used), Year of construction: 1970, Manufacturer: Metalexport Poland Year of manufacture: 1970 Type / Model: TUE 40 Machine number: 8604 Control: conventional Distance between centers: 1,500 mm Spindle bore: 38 mm Center height: 210 mm Turning diameter over bed: 420 mm over carriage: 240 mm in gap: 600 mm Speed range: 22.4 to 1,000 rpm Feed: Connection: kW Laedsv N Tu Ispfx Anujc Accessories/Equipment: fixed and traveling steady rest, 4-way tool holder, 200 mm 3-jaw chuck, coolant system Condition: good Weight: approx. 2.5 t Dimensions: 2,800 x 800 x 1,200 mm

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, spindle bore: 50 mm, turning diameter: 400 mm, turning diameter over bed slide: 400 mm, turning diameter over top slide: 250 mm, center height: 200 mm, center width: 1,000 mm, turning length: 1,000 mm, quill stroke: 120 mm, quill diameter: 50 mm, total length: 1,950 mm, total width: 1,060 mm, total height: 1,635 mm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 40 rpm, overall weight: 865 kg, travel distance X-axis: 220 mm, travel distance Z-axis: 110 mm, spindle motor power: 5,300 W, welding current (max.): 500 A, Equipment: documentation/manual, rotational speed infinitely variable, type plate available, EMCO EMCOMAT-20 D universal lathe in very good condition, with various tool cassettes, collets, and chuck jaws. Manufacturer: EMCO Model: EMCOMAT-20 D Year of manufacture: 2010 Condition: very good, fully functional Location: Graz (Austria) Highlights at a glance: - Center distance 1000 mm – ideal for longer workpieces - Stepless speed control up to 3000 rpm - Robust, induction-hardened machine bed - Hardened and ground guides & gears - Electromechanical spindle brake - Very stable design – 865 kg machine weight - Safety monitoring via electrical limit switches - With modern 3-axis digital display Technical data: - Center distance: 1000 mm - Center height: 200 mm - Swing over bed: 400 mm - Spindle bore: 50 mm - Speed: 40 to 3000 rpm - Spindle connection: DIN 55029 size 5 - Drive power: 5.3 kW - Tailstock spindle diameter: 50 mm - Taper: MK3 Lasdeyxvqvspfx Anujc - Travel: 120 mm - Dimensions (L x W x H): 1950 x 1060 x 1635 mm - Weight: approx. 865 kg Optional equipment: - Coolant system - 3-axis positioning display with 0.001 mm accuracy Scope of delivery: Machine including cabinet and various tools, tool cassettes, etc. (see pictures) Quality & Safety: The machine impresses with the typical EMCO quality "Made in Austria": Are you interested? Please contact us to arrange a viewing appointment or to receive a quote.

Condition: excellent (used), Year of construction: 2012, Lathe, Optimum, Type D420x1000 DPA, Center height 210 mm Distance between centers 1,000 mm Spindle speed 45 - 1,800 rpm Total power consumption 4.5 kW 400 V / 3-phase ~50 Hz Coolant system 100 W Spindle bore, bar passage Ø 52 mm 3-jaw chuck Ø 200 mm Coolant system Laodpfx Aozb Icnjnujc Machine lamp Steady rest Digital display Fagor