Used center lathes 400-499mm turning diameter over bed for sale (211)

Condition: excellent (used), - Maximum turning diameter over bed: 500 mm. - Maximum turning diameter over gap/bridge: 580 mm. - Turning length between centers: 1500 mm. Djdoygy Duopfx Akvjwa - Spindle bore: 71 mm. - Spindle speed range: 14–1800 rpm (22 speed steps). - Main motor power: 11 kW. - Machine weight: approx. 3,000 kg. - Equipped with rapid feeds (0.55 kW motor) - Tailstock with Morse taper 5.

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: 185, turning diameter over cross slide: 800 mm, spindle bore: 180 mm, turning diameter: 1,000 mm, turning diameter over bed slide: 1,000 mm, turning length: 2,000 mm, faceplate diameter: 900 mm, Potisje lathe PA - 50 - DC. Excellent condition. Steady and following rests included, along with face plate. Cone attachment on the lathe. Dedpfx Akeww Igmjvewa

Condition: excellent (used), Conventional lead and feed screw lathe from manufacturer Nardini S.A. Máquinas e Ferramentas, model ND 220 SE. Well-maintained machine in technically flawless condition. Technical Data: Machine type: Lead and feed screw lathe Manufacturer: Nardini Model: ND 220 SE Control: Conventional Center height: 220 mm Distance between centers: 1,000 / 1,500 mm Swing over bed: 440 mm Swing over cross slide: 270 mm Swing in gap: 630 mm Gap length in front of faceplate: 200 mm Spindle Spindle nose with short taper size 6, DIN 55027 Spindle bore: 52 mm Internal taper: 1:20 Reducer bush: MT 4 18 spindle speeds: 25 – 2,000 rpm Feed and thread range 132 longitudinal feeds: 0.057 – 2.645 mm/rev 132 cross feeds: 0.028 – 1.322 mm/rev 54 metric threads 54 Whitworth threads 54 module threads 54 diametral pitch threads Leadscrew pitch: 6 mm Carriage & Compound Cross slide travel: 250 mm Top slide travel: 125 mm Max turning tool section: 20 × 20 mm Top slide swivel range: ± 45° Tailstock Quill diameter: 60 mm Internal taper: MT 4 Quill stroke: 200 mm Lateral offset: 15 mm Drive Main motor: 3-phase 380 V / 50 Hz, pole-reversible, 3 / 6 kW Coolant pump: 0.09 kW Operational Advantages - Robust machine bed - Very large feed and thread range Dwodpfxsypcpxo Akvoa - Suitable for both single-part and series production - Easy operation - Durable industrial quality Used machine Technically tested Fully functional Ready for immediate use Delivery time: Immediate Ex-works, loaded free of charge Loading: Forklift available Transport / shipping: can be arranged

Condition: good (used), For sale is a heavy-duty industrial lathe TOS TRENČÍN type 16D20 (long-bed version). The machine stands out for its robust construction, smooth operation, and an exceptionally large spindle bore – ideal for shafts, pipes, and large workpieces. Technical Data Machine type: Engine lathe with leadscrew and feed shaft Manufacturer: TOS TRENČÍN Model: 16D20 Control: conventional Max. turning diameter over bed: 400 mm Max. turning diameter over cross slide: 220 mm Spindle bore: 63 mm Max. workpiece length: 1,000 mm Spindle speed range: 8.5 – 2,000 rpm Main drive: 11 kW Dimensions & Weight Dimensions (L × W × H): approx. 2,880 × 1,270 × 1,605 mm Machine weight: approx. 2,800 kg Heavy, torsion-resistant machine construction Large working area for universal turning tasks Precision spindle bearings Smooth running even at high speeds Suitable for single-piece and series production Used Solid industrial machine Technically fully functional Ready for operation Dwjdpfx Aeypcy Rokvea Delivery time: immediately Terms: ex-site, loaded free of charge Loading: no problem Transport / forwarding: can be organized

Condition: like new (used), Year of construction: 2017, operating hours: 300 h, functionality: fully functional, machine/vehicle number: 20161259/2017, Filling system for all liquids. The system was used to fill disinfectant bottles. The system was put into operation in 2017 and is still as good as new, having only been in operation for a few hundred hours. The article produced was only sold during Corona. It is also possible to purchase the complete product. Unfortunately there are only a few photos, but we would be happy to send you a video of the system in operation. Dedpfevmnkrex Akvewa

Condition: new, Bernardo Universal Lathe Solid 460 x 2000 Pro Vario Technical Specifications Centre distance: 2000 mm Dwsdpfx Aexl Tcmjkvsa Centre height: 230 mm Swing over bed: 460 mm Swing over gap: 690 mm Swing over cross slide: 274 mm Bed width: 300 mm Spindle bore: 80 mm Spindle mount: DIN 55029, D1-8 Speed range: 25 – 250 / 250 – 1700 rpm Longitudinal feed range (42): 0.055 – 3.065 mm/rev Cross feed range (42): 0.025 – 1.386 mm/rev Metric threads (41): 0.1 – 14 mm Inch threads (60): 2 – 112 TPI Quill diameter: 60 mm Quill stroke: 130 mm Quill taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (W x D x H): 3250 x 1080 x 1370 mm Weight approx.: 2030 kg Features • Modern main spindle bearing with precision angular contact ball bearings • Standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Infinitely variable speed control, set speed displayed on digital readout • Hardened and ground gears and shafts, including in feed gearbox • Standard with rapid traverse longitudinally and in cross for reduced non-productive times • Central, user-friendly feed and thread selection with leadscrew and feed rod • Oversized, hardened, and precision-ground gears • Simple, smooth, and precise speed and feed adjustment • One-piece cast machine bed, extremely torsion-resistant and low-vibration, ensuring essential prerequisites for precision turning Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Fixed steady rest – max. passage diameter 150 mm • Travelling steady rest – max. passage diameter 110 mm • Initial fill with Shell Tellus 46 • Face plate 450 mm • Quick-change tool post with 4 holders • Safety device for quick-change tool post • Foot pedal with CE-compliant brake function • Coolant system • Frequency inverter • Overload clutch • Rapid traverse longitudinal and cross • Change gears • Reducing sleeve • 2 centres • Thread dial indicator • LED machine lamp • Chip guard at the rear • Operating tools

Condition: new, Year of construction: 2025, spindle bore: 51 mm, turning diameter over bed slide: 400 mm, turning diameter over top slide: 250 mm, center height: 200 mm, turning length: 1,000 mm, total length: 1,900 mm, total width: 750 mm, total height: 1,500 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 40 rpm, type of input current: three-phase, overall weight: 1,550 kg, three-jaw chuck diameter: 200 mm, Centre distance ----- 1000 mm Centre height ----- 200 mm Swing over bed ----- 400 mm Spindle bore ----- 51 mm Bed width ----- 260 mm Spindle speed ----- 40-1800 rpm Dwedpfxsymd Dre Akvja Motor ----- 3 KW Weight ----- 1550 kg INCLUDES * 3-axis digital readout brand SINO * Multifix quick-change tool post type TOOB2 with 4 holders * 3-jaw chuck 200 mm * 4-jaw chuck 200 mm * Faceplate 250 mm * LED work lamp and coolant system * Fixed and travelling steady rest

Condition: new, Year of construction: 2025, turning diameter: 410 mm, – Centre distance: 1500 mm – Swing diameter over bed: 410 mm – Swing diameter over gap: 580 mm – Swing diameter over cross slide: 255 mm – Spindle bore: 52 mm Djdpfxeytadno Akvowa – 45–1800 rpm – Longitudinal and cross feed – Digital readout – Brake – Coolant system – Lighting – Safety guard – Fixed steady rest – Travelling steady rest – Three-jaw chuck – Four-jaw chuck – Multifix toolpost with 4 holders – Emergency stop – Documentation – 400V

Condition: new, Year of construction: 2025, functionality: fully functional, spindle bore: 51 mm, turning diameter: 410 mm, turning diameter over top slide: 268 mm, center height: 205 mm, turning length: 1,000 mm, total length: 1,820 mm, total width: 740 mm, total height: 1,550 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 45 rpm, bed width: 206 mm, Turning diameter in gap: 580 mm, type of input current: three-phase, overall weight: 880 kg, three-jaw chuck diameter: 200 mm, Centre distance ----- 1000 mm Centre height ----- 205 mm Swing diameter ----- 410 mm Dwodpfex Rkvkjx Akvsa Main spindle bore ----- 51 mm Bed width ----- 206 mm Spindle speed ----- 45-1800 rpm Motor ----- 2.4 kW Weight ----- 880 kg INCLUDES * 3-axis digital readout by SINO * Quick-change tool post type Multifix TOOB2 with 4 tool holders * 3-jaw chuck 200 mm * 4-jaw chuck 200 mm * Face plate 250 mm * LED work lamp and coolant system * Fixed and travelling steady rest * Foot brake (CE) * Electric brake (CE)

Condition: new, – Distance between centers: 1000 mm – Swing diameter over bed: 410 mm – Swing diameter over gap: 580 mm – Swing diameter over cross slide: 255 mm – Spindle bore: 52 mm – 45/1800 rpm – Longitudinal and transverse feed – Digital readout – Brake – Coolant system – Multifix with 4 tool holders Dodpjw S Ikmefx Akvjwa – Lighting – Safety guard – Fixed steady rest – Travelling steady rest – Three-jaw chuck – Four-jaw chuck – Emergency stop – Documentation – 400V

Condition: new, Bernardo Universal Lathe Smart 410 x 1500 Pro Technical Specifications - Distance between centers: 1500 mm - Center height: 210 mm - Swing over bed: 420 mm - Swing over gap: 580 mm - Swing over cross slide: 255 mm - Bed width: 250 mm - Spindle bore: 52 mm - Spindle mount: DIN 55029, D1–6 - Speed range (16 steps): 45 – 1,800 rpm - Longitudinal feed range (17 steps): 0.05 – 1.7 mm/rev - Cross feed range (17 steps): 0.025 – 0.85 mm/rev - Metric threads (42): 0.2 – 14 mm - Inch threads (45): 2 – 72 TPI - Tailstock quill diameter: 50 mm - Tailstock quill travel: 140 mm - Tailstock taper: MT 4 - Motor power: 3.0 / 4.5 kW - Machine dimensions (L x W x H): 2570 x 900 x 1600 mm - Weight approx.: 1,400 kg Product Features • Prism bed made of grey cast iron, induction hardened and precision ground • Electromechanical foot brake for reduced auxiliary times • Central, user-friendly control for feeds and threading with lead and feed screw • Modern main spindle bearing with precision angular contact ball bearings • Large-dimensioned, hardened and precision-ground gears • Hardened and ground gears and shafts, including feed gearbox • Simple, smooth, and precise adjustment of speed and feeds • Adjustable tailstock for taper turning, handwheel with fine scale (0.02 mm) • Removable gap bridge for machining large-diameter workpieces Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck DK11-200 mm / D6 • Face plate 350 mm • Fixed steady rest – max. capacity 135 mm Dedpfexl Dwujx Akvewa • Traveling steady rest – max. capacity 65 mm • Coolant device • Four-way tool post • Safety guard for tool post • Micrometer longitudinal stop • Slip clutch • Turret stop with fine adjustment • Thread indicator dial • Motor with electromagnetic brake, CE-compliant • Foot pedal with brake function, CE-compliant • Initial fill with Shell Tellus 46 • LED machine lamp • Change gears • Reducing sleeve • 2 dead centers • Chip guard • Service tools

Condition: like new (used), Horizontal lathe Diameter above the bed 385mm Distance between centers: 900mm Djdog R Sm Iepfx Akvswa Spindle bore (mm) 51,5 Diam. above the carriage (mm) 220 Spindle speeds 38 - 1600 (16x) Motor power kW 2.94 Voltage (V) 380 Hertz (Hz) 50

Condition: new, Bernardo universal lathe Solid 460 x 1000 Pro Center width 1000 mm center height 230 mm Swing diameter over bed 460 mm Swing diameter over offset 690 mm Swing diameter over cross slide 270 mm Bed width 300 mm Spindle bore 80 mm Spindle holder DIN 55029, D1-8 Speed range (12) 25 - 1700 rpm Range of longitudinal feeds (42) 0.055 - 3.065 mm/rev Face feed range (42) 0.025 - 1.386 mm/rev Metric threads (41) 0.1 - 14 mm Inch thread (60) 2 - 112 Gg/1" Quill diameter 60 mm Quill travel 130 mm Quill holder MK 4 Motor power 5.5 kW (7.5 HP) Machine dimensions (W x D x H) 2300 x 1080 x 1600 mm Djdpfx Akoqwkd Uovowa Weight approx. 1675 kg Machine features - Modern main spindle bearing with angular contact ball bearings in precision design - Hardened and ground gears and shafts, also in the feed gearbox - Central, handy control for feeds and threads with lead and feed spindles - The gears are large, hardened and precision-ground - The speed and feed adjustment is simple, smooth-running and precisely switchable - Longitudinal and flat rapid traverse as standard to reduce idle times - The machine bed, cast in one piece, is extremely torsion-resistant and low-vibration, thus fulfilling an essential requirement for precise turning Scope of delivery - 3-axis digital readout ES-12 V with LCD display - 3-jaw chuck PS3-250 mm / D8 - Clamping disk 450 mm - Coolant device - Initial filling with Shell Tellus 46 - Fixed steady rest - passage diam. max. 150 mm - Rotating steady rest - passage diam. max. 110 mm - Quick-change steel holder with 4 inserts - Safety device for quick-change steel holder - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - Slipping clutch - Longitudinal and flat rapid traverse - Interchangeable wheels - 2 centering points - Reducing sleeve - Thread clock - LED machine light - Chip back plate - Operating tool

Condition: new, Year of construction: 2025, For current prices and delivery times, please contact us. Dimensions and weights: Length (product): approx.3265mm Width/depth (product): approx.1065mm Height (product): approx.1550mm Dwjdpsq Ukbpofx Akvea Weight (net): approx.1965kg Working ranges: Center height: 230mm Center width: 2060mm Circumferential diameter over machine bed: 460mm Circumferential diameter in the bed bridge: 690mm Swing diameter over cross slide: 270mm Turning length in the bed bridge: 240mm Bed width: 300mm Speed range: Number of speed ranges: 12 Speed range: 25 - 2000min¯¹ Electrical data: Power drive motor5.5kW Supply voltage400V Mains frequency50Hz Cooling lubricant system Cooling lubricant system Coolant pump output: 125W Spindle: Spindle holder: Camlock DIN ISO 702-2 No. 6 Spindle bore/bar passage diameter: 58mm Steel holder max. mounting height: 25mm Spindle cone: MK 6 Tailstock: Tailstock holder: MK 4 Tailstock quill stroke: 130mm Tailstock quill diameter: 60mm Pitch: Pitch metric:0.1 - 14mm/rev Number of leads metric: 41 Pitch inch: 112 - 2Gg/1" Number of pitches inch:41 Pitch Diametral Pitch: 4 - 112DPI Number of pitches Diametral Pitch: 50 Module thread pitch: 0.1 - 7mm/rev Number of module thread pitches:34 Travel distance: Top slide travel: 125mm Travel of face slide: 285mm Bed slide travel: 1805mm Feed rate: Feed range longitudinal: 0.031 - 1.7mm/rev Number of longitudinal feeds: 42 Feed range flat: 0.014 - 0.784mm/rev Number of feeds flat: 42 Electrical connection: Total connected load: 5.8kW

Condition: used, turning diameter over bed 370 mm turning diameter over slide rest 200 mm turning length 1000 mm centre height 185 mm spindle bore 56 mm tailstock quill taper MT 4 turning speeds 50 - 2000 U/min power capacity 4,0 kW weight of the machine ca. 1,4 t dimensions of the machine ca. 2,3 x 1,1 x 1,3 m Center lathe 200mm three-jaw chuck Djdpfxsxfwcks Akvewa Size B Multifix tool post 3 Multifix tool holders Emergency stop device

Condition: good (used), Year of construction: 1972, functionality: fully functional, machine/vehicle number: 70.1025.002302, turning diameter over cross slide: 280 mm, spindle bore: 52 mm, turning diameter: 485 mm, center height: 232 mm, center width: 360 mm, turning length: 1,600 mm, total length: 3,350 mm, total width: 1,100 mm, total height: 1,400 mm, spindle speed (max.): 2,240 rpm, spindle speed (min.): 11 rpm, overall weight: 2,500 kg, workpiece weight (max.): 500 kg, Offered for sale is a VDF 48S Boehringer lead and feed screw lathe with accessories in good condition. Manufacturer: VDF Boehringer Göppingen Model: 48S Machine no.: 70.1025.002302 Year of manufacture: approx. 1972 Centre height: 232 mm Centre distance: 1600 mm Swing over bed: 485 mm Dwodpsx Nqklofx Akvoa Swing over cross slide: 280 mm Spindle bore: 52 mm Spindle speeds: 11.2 - 2240 rpm Total power requirement: 7.5 kW Machine dimensions (L x W x H): approx. 3.35 x 1.10 x 1.40 m Weight: approx. 2,500 kg

Condition: new, functionality: fully functional, spindle bore: 52 mm, turning diameter: 410 mm, turning diameter over top slide: 250 mm, center height: 205 mm, turning length: 1,500 mm, total length: 2,440 mm, total width: 915 mm, total height: 1,550 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 45 rpm, bed width: 250 mm, Turning diameter in gap: 580 mm, overall weight: 1,400 kg, three-jaw chuck diameter: 200 mm, Center distance ----- 1500 mm Dwsdoh U Nxmspfx Akvsa Center height ----- 205 mm Turning diameter ----- 410 mm Headstock bore ----- 52 mm Bed width ----- 250 mm Spindle speed ----- 45-1800 rpm Motor ----- 3 kW INCLUDED * 3-axis digital readout system, brand SINO * Quick-change tool holder, Multifix TOOB2 type, with 4 tool posts * 3-jaw chuck 200 mm * 4-jaw chuck 250 mm * Faceplate 350 mm * Fixed and follow rest * LED work light and cooling system * Electric brake CE * Toolbox with various tools

Condition: new, Year of construction: 2025, turning diameter: 410 mm, turning diameter over top slide: 255 mm, center height: 205 mm, turning length: 1,000 mm, total length: 1,940 mm, total width: 850 mm, total height: 1,550 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 45 rpm, bed width: 250 mm, Turning diameter in gap: 580 mm, type of input current: three-phase, overall weight: 1,550 kg, three-jaw chuck diameter: 200 mm, Center length ----- 1000 mm Center height ----- 205 mm Turning diameter ----- 410 mm Headstock bore ----- 52 mm Bed width ----- 250 mm Spindle speed ----- 45-1800 rpm Motor ----- 3 kW INCLUDED * 3-axis digital readout, brand SINO Dsdpfxega T D Eo Akvowa * Quick-change tool holder, type Multifix TOOB2, with 4 tool blocks * 3-jaw chuck, 200 mm * 4-jaw chuck, 250 mm * Faceplate, 350 mm * Fixed and follower rest * LED work light and cooling system * Electric brake CE * Tool kit with various tools

Condition: used, turning diameter over bed 410 mm turning diameter over slide rest 260 mm turning length 1000 mm turning speeds 40 - 2000 U/min centre height 205 mm spindle bore 50 mm total power requirement 4,5 KW weight of the machine ca. 1,6 t dimensions of the machine ca. 2,4 x 1,3 x 1,5 m Leadscrew lathe Dedpfswz Ruzsx Akvowa - with copying device - 200mm 3-jaw chuck - 2x Multifix quick-change tool holders - Live center - Machine light - Chip tray

Condition: new, Bernardo Universal Lathe Smart 410 x 1000 Pro Technical Specifications Distance between centers: 1000 mm Center height: 210 mm Swing over bed: 420 mm Swing over gap: 580 mm Swing over cross slide: 255 mm Bed width: 250 mm Spindle bore: 52 mm Spindle mount: DIN 55029, D1 – 6 Spindle speed range (16): 45 – 1800 rpm Longitudinal feed range (17): 0.05 – 1.7 mm/rev Cross feed range (17): 0.025 – 0.85 mm/rev Metric threads (42): 0.2 – 14 mm Inch threads (45): 2 – 72 TPI Quill diameter: 50 mm Quill travel: 140 mm Quill taper: MK 4 Motor power: 3.0 / 4.5 kW Machine dimensions (L x W x H): 2070 x 900 x 1600 mm Weight approx.: 1220 kg Features • Prism bed made of grey cast iron, induction-hardened and precision-ground • Electromechanical foot brake for reducing non-productive times • Central, user-friendly control for feeds and threading with leadscrew and feed rod • Modern main spindle bearings with precision angular contact ball bearings Dwjdpsxl Dx Eofx Akvja • Large-dimensioned, hardened and precision-ground gears • Hardened and ground gears and shafts, including in the feed gear box • Speed and feed settings are straightforward, smooth, and precise to operate • Adjustable tailstock for taper turning, handwheel with adjustable fine scale (0.02 mm) • Removable gap bridge allows machining of large-diameter workpieces Scope of Delivery • Prism bed made of grey cast iron, induction-hardened and precision-ground • Electromechanical foot brake for reducing non-productive times • Central, user-friendly control for feeds and threading with leadscrew and feed rod • Modern main spindle bearings with precision angular contact ball bearings • Large-dimensioned, hardened and precision-ground gears • Hardened and ground gears and shafts, including in the feed gear box • Speed and feed settings are straightforward, smooth, and precise to operate • Adjustable tailstock for taper turning, handwheel with adjustable fine scale (0.02 mm) • Removable gap bridge allows machining of large-diameter workpieces

Condition: new, Bernardo Universal Lathe Solid 460 x 1500 Pro Technical Specifications Centre distance: 1500 mm Centre height: 230 mm Swing diameter over bed: 460 mm Swing diameter over gap: 690 mm Swing diameter over cross slide: 270 mm Bed width: 300 mm Spindle bore: 80 mm Spindle mount: DIN 55029, D1-8 Speed range (12 steps): 25 – 1700 rpm Longitudinal feed range (42 steps): 0.055 – 3.065 mm/rev Cross feed range (42 steps): 0.025 – 1.386 mm/rev Metric threads (41): 0.1 – 14 mm Inch threads (60): 2 – 112 TPI Quill diameter: 60 mm Quill travel: 130 mm Quill taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (W x D x H): 2750 x 1080 x 1600 mm Weight approx.: 1845 kg Features Dwodpjxl Dyvsfx Akvoa - Modern main spindle bearing with precision angular contact ball bearings - Hardened and ground gears and shafts, including feed gearbox - Central, user-friendly control for feeds and threads with leadscrew and feed rod - Oversized, hardened and precision-ground gears - Simple, smooth, and precise speed and feed adjustment - Rapid traverse longitudinal and cross as standard to reduce non-productive times - One-piece, heavily ribbed machine bed for high torsional stiffness and vibration damping, providing the basis for accurate turning Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Face plate 450 mm • Coolant system • Initial fill with Shell Tellus 46 • Fixed steady rest – max. through-hole dia. 150 mm • Follow steady – max. through-hole dia. 110 mm • Quick-change tool post with 4 holders • Safety guard for quick-change tool post • Motor with magnetic brake conforming to CE standards • Foot pedal with braking function, CE compliant • Slip clutch • Rapid traverse longitudinal and cross • Change gears • 2 centre points • Reducing sleeve • Thread dial indicator • LED machine lamp • Chip guard rear wall • Operating tools

Condition: new, Bernardo Universal Lathe Solid 460 x 2000 Pro Technical Specifications Distance between centers: 2000 mm Center height: 230 mm Swing over bed: 460 mm Swing over gap: 690 mm Swing over cross slide: 270 mm Bed width: 300 mm Dwodpfx Asxl Dzajkvsa Spindle bore: 80 mm Spindle mount: DIN 55029, D1-8 Spindle speed range (12 steps): 25 – 1700 rpm Longitudinal feed range (42 steps): 0.055 – 3.065 mm/rev Cross feed range (42 steps): 0.025 – 1.386 mm/rev Metric threads (41): 0.1 – 14 mm Inch threads (60): 2 – 112 TPI Tailstock quill diameter: 60 mm Tailstock quill travel: 130 mm Tailstock taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (W x D x H): 3250 x 1080 x 1600 mm Weight approx.: 1995 kg Features • Modern main spindle bearing assembly with precision angular contact ball bearings • Hardened and ground gears and shafts, including feed gearbox • Central, ergonomic control for feeds and threads via lead and feed shaft • Large, hardened, and precision-ground gears • Simple, smooth and precise speed and feed adjustment • Rapid traverse (longitudinal and cross) as standard for reduced non-productive time • Machine bed cast in one piece, extremely torsion-resistant and low-vibration for high precision turning Scope of delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Faceplate 450 mm • Coolant system • Initial fill with Shell Tellus 46 • Fixed steady rest – max. diameter 150 mm • Travelling steady rest – max. diameter 110 mm • Quick-change toolpost with 4 holders • Safety device for quick-change toolpost • Motor with electromagnetic brake according to CE • Foot pedal with brake function according to CE • Slip clutch • Rapid traverse longitudinal and cross • Change gears • 2 centers • Reducing sleeve • Thread-chasing dial • LED machine lamp • Chip guard at rear • Operating tools

Condition: used, Year of construction: 1979, functionality: fully functional, turning diameter: 640 mm, center height: 320 mm, turning length: 2,000 mm, Leadscrew and feedshaft lathe VDF with digital readout, powered top slide, 3-axis feed with rapid traverse, 3-jaw chuck, faceplate, Multifix toolholder with 5 inserts. Dwsdpexz Edzjfx Akvoa

Condition: used, Year of construction: 1976, turning diameter over bed 600 mm turning diameter over slide rest 400 mm turning length 1000 mm turning diameter in the gap 850 mm Dwsdew Tdxcopfx Akvja turning speeds 15 - 810 U/min centre height 300 mm spindle bore 56 mm total power requirement 9,0 KW weight of the machine ca. 2,9 t dimensions of the machine ca. 2,8 x 1,45 x 1,65 m Center lathe - Forkardt 3-jaw chuck F 315 - Single-jaw tool post - Steady rest - Live center - Chuck guard, limit switch monitored - Chip tray

Condition: new, Bernardo Universal Lathe Smart 410 x 1500 Pro Vario Technical Specifications Centre distance: 1500 mm Centre height: 210 mm Swing over bed: 420 mm Swing over gap: 580 mm Swing over cross slide: 255 mm Bed width: 250 mm Spindle bore: 52 mm Spindle mount: DIN 55029, D1 – 6 Speed range, 2 stages: 30 – 550 / 550 – 3000 rpm Longitudinal feed range (17): 0.05 – 1.7 mm/rev Cross feed range (17): 0.025 – 0.85 mm/rev Metric threads (42): 0.2 – 14 mm Imperial threads (45): 2 – 72 TPI Quill diameter: 50 mm Quill travel: 140 mm Quill taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (W x D x H): 2590 x 1050 x 1600 mm Weight: approx. 1325 kg Features • Equipped as standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Infinitely variable speed control, selected speed displayed digitally • Prism bed made of cast iron, inductively hardened and precision ground • Central, user-friendly feed and thread control with leadscrew and feed shaft • Modern main spindle bearings with precision angular contact ball bearings • Standard features include frequency inverter and 3-axis digital readout • Hardened and ground gears and shafts, including in the feed gearbox • Speed and feed settings are simple, smooth, and precise to operate • Adjustable tailstock for taper turning, handwheel with fine scaling (0.02 mm) • Removable bridge allows machining of large-diameter workpieces Scope of Delivery Dwsdoxl Ta Sopfx Akvsa • 3-axis digital readout ES-12 V with LCD display • 3-jaw steel chuck PO3-200 mm / D6 • Faceplate 350 mm • Fixed steady – max. workpiece diameter 135 mm • Travelling steady – max. workpiece diameter 65 mm • Foot pedal with brake function according to CE • Four-way tool post • Safety guard for four-way tool post • Micrometer longitudinal stop • Turret stop with fine adjustment • Frequency inverter • First fill with Shell Tellus 46 • Coolant system • Slip clutch • Thread dial indicator • LED machine lamp • Change gears • Reducing sleeve • 2 dead centres • Chip guard/rear screen • Operator tools