Used Bolster plates for sale (360)

Condition: good (used), machine/vehicle number: 11285, OFFER 11285 2 pcs. T-slot plate/clamping + straightening and welding plate Technical data per : - Total - length approx. 2020 mm - clamping surface length / groove length approx. 2000 mm - width approx. 1000 mm - plate thickness 180 / 300 mm - Plate thickness top plate 180 mm - 4 T - grooves - T - grooves distance 250 mm each - groove width approx. 28 / 50 mm Cob Etu Aogq Utvsnegt - groove depth approx. 25 / 45 mm - various through holes - weight approx. 2000 kg

Condition: good (used), Clamping plate with grooves, marking plate, measuring plate, measuring table, straightening plate, marking plate Cgob Eendzycjtu Anot -Clamping surface: 2995 x 2500 mm -Clamping plate: with grooves, no T-slots -Height: 300 mm -Groove width: 10 mm -Groove spacing: 200 mm -Transport dimensions: 3100/2500/H300 mm -Weight: 5000 kg

Condition: used, floor-plate length 1050 mm floor-plate width 1050 mm Ceb Etueu Sbfkj Anegt floor-plate height 60 mm weight of the machine ca. 0,2 t dimensions of the machine ca. 1050x1050x0,1 m table plate of PFSU 1600, Ø 1050 mm

Condition: used, Steel straightening and welding plate Machined steel plate Length 1900 mm Width 1500 mm Thickness 70 mm continuous - machined surface weight approx. 1600 kg good condition Cob Eedzqr Rjtu Anogt Height-adjustable cast steel feet can be found in our store

Condition: used, Year of construction: 1970, length 5000 mm width 1700 mm number 1 Plate thickness 250 mm weight of the machine ca. 6 t dimensions of the machine ca. 5 x 1,7 x 0,25 m This plate is a table of a bed milling machine ! This table has 8 t- slots in Cjb Etu Asu Rt D Nsnogt length direction each 32 mm wide.

Condition: used, dimensions 2,000 x 1,290 mm Cgjbon Tvhij Etu Anjt thickness of the plate 95 mm T - slots width 30 mm weight appro. 1,700 kg

Condition: good (used), machine/vehicle number: 18285, Aluminium clamping table - Clamping block Offer number: 18285 Make: xxxxx Type: xxxx Machine No: 18285 Year of construction: xxxx Technical data: - Board surface in good condition - Length approx. 1540 mm - Width approx. 1540 mm - Height approx. 410 mm - Panel thickness 20 mm - 6 pcs. screw-on bars 50 x 20 mm - various drillings partly with thread - Intermediate webs between upper plate and lower support surface - 4 Towing eyes Cgsb Etusfhv I Ao Anot - Weight approx. 180 kg

Condition: good (used), clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Surface: with grooves, without T-slots Cgob Etu Ajkm Rn Denot -Length: 3000 mm -Width: 2500 mm -Height: 300 mm -Transport dimensions: 3000/2500/H300 mm -Weight: 5220 kg

Condition: used, Steel straightening and welding plate, solid material Machined steel plate from a tool rack length 2980 mm width 1380 mm thickness 74 mm - full steel plate - surface milled - 4 pieces of bolted towers own weight approx. 2380 kg Cgsb Etohwn Tiou Anst

Condition: used, dimensions 2,000 x 1,290 mm thickness of the plate 95 mm Cob Esn Tvhqotu Anjgt T - slots width 30 mm weight appro. 1,700 kg

Condition: good (used), machine/vehicle number: xxxx; Lg-Nr. 17268, Technical data: -Get well plate surface -Length 2000 mm -Approx. 1000 mm wide -Height approx. 1600 mm -Top plate thickness approx. 95 mm Cgjb Eodd Dmxotu Anot -Top plate with internal ribbing - 4 piece t grooves on the surface of the table length 2000 mm -Centre distance of the T-slot table top 230 mm each -Table side L 2000 mm with 12 holes M27 -T - slot width approx. 40 / 67 mm -T - groove depth approx. 35 / 60 mm -Space requirement L 2200 X 1200 x H 1600 mm - weight approx. 4980 kg

Condition: used, Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring mill, T-slot plate, pallet changer, pallet changing system -Mounting plate: with T-slots and clamping devices, comes from a CNC machining center -Width: 500 mm -Length: 400 mm -Groove width: 14 mm -Grooves spacing: 65 mm Cgsbog R Tfuj Etu Anjt -Dimensions: see techn. Drawing with the photos -Tensioning devices: see photos -Dimensions: 400/500 / H315 mm -Weight: 111 kg

Condition: used, Clamping plate, machine table, straightening plate EIGENBAU Clamping table, welding plate Table surface: 2150 x 1040 mm Overall height: 200 mm - Top and underside machined parallel, planed surfaces - Table top L x W x H = 2150 x 1040 x 65 mm - Table top with M16 and M24 threaded holes, M16, M24, M16, M24 etc. - Hole spacing in length: approx. 250 mm - Hole spacing in width: approx. 255 / 165 / 255 mm Cgjb Etu Ajtqgnyjnjt - Double T-beam dimensions: L x W x H 2150 x 125 x 135 mm - Distance between the double T-beams: 50 to 55 mm - 6 double T-beams welded onto steel plate Weight: 1730 kg good condition

Condition: used, dimensions 2,000 x 1,290 mm thickness of the plate 95 mm T - slots width 30 mm Csb Etujn Stako Anogt weight appro. 1,700 kg

Condition: good (used), Offer 24132 + 24133 Technical data approx: - 2 pieces T - groove plates total approx. 4970 x 3880 mm Cob Etuotiybxj Anegt - Clamping plates - length approx. 4970 mm each - Clamping plates - width approx. 1940 mm each - Top panel thickness approx. 90 mm - Panel thickness with ribbing 200 mm - 4 T - longitudinal grooves L 4970 mm each - Distance from outer edge to center of T-slot 110 mm - Distance between the T-slots 550 mm - T-slots for T-nuts M 24 - Lateral holes to connect the two panels together - Weight per panel approx. 6000 kg - Total weight approx. 12 T.

Condition: used, Year of construction: 2009, clamping plate, welding table, welding table, surface plate -Clamping plate: is steel -Width: 1000 mm -Length: 1000 mm -Height: 820 mm -Plate thickness: 50 mm -Plate is on: steel frame -Quantity: 1 piece available Cjb Etu Ajdz Tdxonjgt -Transport dimensions: 1000/1000/H820 mm -Weight: 466 kg

Condition: used, Clamping plate with T-slots made of cast steel gray cast iron Base plate of radial drilling machine length 1850 mm width 915 mm plate thickness 230 mm table surface with T-slots 1030 x 750 mm - clamping surface with T-slots 22 mm, distance = 250 mm Cjb Etsh R D Uzju Ansgt - Milled top side parallel to the bottom side = clamping surface - Milled underside also the webs lie flat and support - Ideal as base plate Dead weight 1140 kg good condition

Condition: used, dimensions 2,000 x 1,290 mm thickness of the plate 95 mm Cob Eon Tvg Tjtu Anegt T - slots width 30 mm weight appro. 1,700 kg

Condition: good (used), OFFER 21469 Technical data: - Clamping surface width approx. 850 mm each - Clamping surface height approx. 700 mm - Clamping block depth 300 mm - Total height with clamping foot 750 mm - Clamping foot dimension 850 x 450 mm - Clamping holes M16 - Distance of the clamping holes 40 mm - Number of clamping holes per side 336 pcs. - Total number of clamping holes 772 pcs. - Inner dimensions of the clamping block 380 x 220 mm each - Wall thickness of the clamping surfaces approx. 40 mm - lateral bolted 3 jaw chuck 300 mm - laterally bolted hydraulic machine vice RÖHM Cjb Etuehg Tpzo Ansgt - jaw width 200 mm - weight approx. 700 kg

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Cgsbsthuzpe Etu Anot Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition

Condition: good (used), machine/vehicle number: 18287 + 88, Technical data: -Get well plate surface -Length approx. 2000 mm Cjb Etu Aod Aakrsnsgt -Width approx. 600 mm -Height approx. 270 mm -Plate thickness 20 mm -div. bores partially with thread -Gutters between top plate and base - weight jeweills approx. 100 kg

Condition: used, Straightening and welding plate cast steel gray cast iron heavily ribbed Length 1600 mm Width 1005 mm Thickness 280 mm Plate thickness approx. 85 mm throughout - Center hole Ø 245 mm, 400/800 mm Cgjb Etedzqbaeu Anet - Threaded holes M 20, approx. 55 mm deep - Through holes Ø 27 mm Weight approx. 2.5 to. good condition Former press table

Condition: good (used), OFFER 21100 Technical data: - Table dimensions approx. 1700 x 1700 mm - side length approx. 700 mm each - welded steel construction made of flat steel 100 x 30 mm - table height approx. 850 mm - table surface approx. 2,3 qm² Ceb Esgmnknstu Ansgt - various clamping tools - weight approx. 1500 kg

Condition: good (used), machine/vehicle number: xxxx; Lg-Nr. 17260, Technical data: -Length 2500 mm -Approx. 1000 mm wide -Height approx. 800 mm -Top plate thickness approx. 90 mm - 4 pieces t grooves in the table surface length 2500 mm -Centre distance of the T-slot table surface each 215 mm Cgsb Etu Asdd Hf Rjnjt -T - slot width approx. 40 / 70 mm -T - groove depth 60 mm -Space requirement L 2700 X 1200 x H 800 mm - weight approx. 3700 kg

Condition: good (used), machine/vehicle number: xxxx; Lg-Nr. 17266, Technical data: -Length 2500 mm -Approx. 1000 mm wide -Height approx. 800 mm -Top plate thickness approx. 90 mm - 4 pieces t grooves in the table surface length 2500 mm -Centre distance of the T-slot table surface each 215 mm -T - slot width approx. 40 / 70 mm -T - groove depth 60 mm -Space requirement L 2700 X 1200 x H 800 mm - weight approx. 3700 kg Cjb Etu Asdd Rcyjnjgt