Used Plate Bearing for sale (15,065)

Condition: excellent (used), functionality: fully functional, Base plate for Esterer sash cutters type SS 71 or HD 71 with main shaft and bearings. Equipped with full and idle pulleys. Djdeth Udmspfx Afnoul

Condition: not inspected (used), functionality: unexamined, overall weight: 150 kg, total length: 640 mm, total width: 640 mm, total height: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned due to the liquidation of a business. Submitting a bid binds you to timely collection between 26/01/2026 and 29/01/2026! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 640 mm x 640 mm x 1,500 mm Weight: 150 kg EQUIPMENT Height gauge Vice with 100 mm jaw width Duedpfx Afoxqqlcjnjl

Condition: used, tee slotted bed plate table 10 ft 6 inch x 3ft and 3 legs. Dsdpfx Afox Rqhyenjul

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Manual 3 roll Bending Machine, excellent condition for sale Dedpfxowk Rlxo Afnsul manufacturer: Isitan 1050X1.2 max sheet width: 1050mm max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm weight: 240kg

Condition: used, Cast iron bed Length: 3300 mm Width: 2000 mm Dsdsxn Invjpfx Afnoul Thickness: 240 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 20 leveling feet Weight: approx 5,5 T

Condition: used, functionality: fully functional, machine/vehicle number: 7FBMF35-16267, Year of construction: 2013, operating hours: 6,500 h, load capacity: 3,000 kg, lifting height: 4,700 mm, fuel type: electric, mast type: triplex, Electric Forklift Truck – Toyota Year of manufacture: 2013 Technical data: • Model: Toyota 7FBMF30 • Load capacity: 3,000 kg • Drive: Electric (battery powered) Dodpfx Afjw Hhwweneul • Mast type: Triplex with free lift • Lift height: approx. 4,300 – 4,800 mm • Fork length: 1,070 mm (standard) • Tyres: Solid rubber • Cabin: Open design, optionally with driver protection roof • Condition: Used, serviced and fully functional

Condition: good (used), Cast iron bed - Floor Plate Useful surface (L x W x H): 3600 x 1200 x 300 mm Djdsh Auahjpfx Afnjul 4 T-slots: width 44 x 26 mm Equipped with Levelling feet Weight: approx 3 T

Condition: used, Cast iron bed Length: 3300 mm Width: 2000 mm Thickness: 240 mm 8 T-slots Dujdpfx Aeww H Ntefnjl T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 20 leveling feet Weight: approx 5,5 T

Condition: good (used), Marble plate Length: 3500 mm Width: 1500 mm Thickness: 300 mm Height on feet: 930 mm Duodpfoig Hu Njx Afnsl Number of feet: 5 feet 1 small failure on the top (L 150 mm x W 20 mm) - see photo Weight: approx 3 T

Condition: used, Cast iron bed Length: 2300 mm Width: 1900 mm Dusdpfxowtc Hgs Afnol Thickness: 200 mm Height on feet: 980 mm 5 T-slots horizontal and vertical T-slots dimensions: 60 x 35 mm Square dimensions: 365 x 365 mm Crack at a longitudinal T (see photo) Weight: approx 3 T

Condition: used, Cast bed Length: 2410 mm Width: 1500 mm Thickness: 550 mm 8 T-slots 50 x 27 mm with 2 opening (possibility to close them) 1 opening L 560 x W 500 mm 1 opening L 480 x W 360 mm Weight: approx 5 T Duedewnfz Nspfx Afnjl

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Length: 2600 mm Dusdswlhflopfx Afnjl Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 12 leveling feet Weight: approx 4,5 T

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Djdpfjwlhd Uox Afnoul Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 12 leveling feet Weight: approx 4,5 T

Condition: good (used), 110 CM X 90 CM X 90 CM Plate Used in tos machine Dujdpfeurv E Dox Afnjl

Condition: not inspected (used), functionality: unexamined, overall weight: 500 kg, measuring range Y-axis: 1,000 mm, plate length: 1,200 mm, plate width: 800 mm, machine/vehicle number: 1162, No reserve price – guaranteed sale to the highest bidder! The machine is auctioned due to a business closure. Submitting a bid obligates timely collection between 26/01/2026 and 29/01/2026! TECHNICAL DETAILS Measuring range: up to 1,000 mm Plate dimensions: 1,200 x 800 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 1,200 x 800 x 2,200 mm Weight: 500 kg Dodoxqqdlepfx Afnsul EQUIPMENT Granite measuring plate

Condition: excellent (used), Plate size: 1200 x 800 mm Plate thickness including ribbing: 80 mm Duedpfx Aox S H Thjfnel Machined edge height: 80 mm

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, straightening plate, scribing plate, test plate, inspection plate, precision measuring table -Mounting plate: with support ribs -Clamping surface: 2000 x 4000 mm -Sheet thickness: 85 mm -Plate: with supporting ribs -Quantity: 1 mounting plate available -Price: per piece -Dimensions: 4000/2000/H405 mm Dodpfox Sym Ujx Afnsul -Weight: 8800 kg

Condition: used, machine/vehicle number: YS2R6X2000201xxxx, mileage: 405,000 km, Year of construction: 2006, Please contact ATS Norway for more information Please provide reference number upon request: 21128 Specifications: 2012 model Km: approx. 405,000 6x2 Euro 3 Axle distance: 350/132 cm Snowplow mount Engine brake Suspension: steel Underslung blade Box (see pictures) Tires (see pictures) New heater radiator New engine hoses VBG tow hitch AC/climate Radio/DAB Ready for delivery Description:2006 Scania R500 6x2 tipper truck with snowplow setup, including mount and underslung blade.The owner has a custom start button installed by Scania; sometimes the key won’t turn.The start button works every time.See video.Ready for delivery. Km: 405000 HK: 500 Duodpjw Raf Hofx Afnol Technical approved: Yes EU-approved until: 09.06.2026 Own weight: 12810 Total Weight: 29000 Payload: 16115 Width: 255 Length: 740 Euro: 3 Model: R500 6x2 brøyterigget tippbil m/ brøyteplate og underliggende skjær. SE VIDEO

Condition: excellent (used), Year of construction: 2001, number of rollers: 3, roller (bottom) diameter: 160 mm, side roll diameter: 160 mm, roller diameter: 160 mm, roller length: 1,040 mm, sheet thickness (max.): 6 mm, 3 roll plate bender SCHRODER FASTI - 136 10/6,5 Harned rolls Minimum work piece diameter 200 mm  Rolling 1,25 x top roll diameter Top and Bottem roll Driven Rolls 700 N/mm2 tensile strength CR-80 SPS Control Highlights of the CR 80 SPS controlThe CR 80 control offers a very comfortably and userfriendly programming. Depending on the program,it is possible to make variable radii without bendingmarks. The calculation of diameters when producingpipes is done automatically.The positioning of bending wheels, sheet feeding andback roll adjustment are frequency-controlled (only incombination with three-roll drive).Products e.g.: Pipes, silencers, triangles, squares Rolling width: 1040mm Rolling thickness 5x toproll Ø:6.5mm Top Roll Ø: 160mm Bottom Roll Ø: 160mm Side roll Ø: 160mm Length: 2020mm Dujdpfsx Swxujx Afnjl Width: 980mm Height: 1070mm Weight: 1530kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, The KRM ST 20/6, a robust Plate Rolling Machine from KNUTH, is designed for exceptional performance in the category of 3-Roll Motor Plate Rollers. This heavy-duty machine is capable of bending workpieces up to 3000 mm in length, making it ideal for a variety of applications in metalworking, including steel and metal construction. With features like a solid, closed machine frame, a motorized rear roller, and an asymmetrical roll arrangement, the KRM ST 20/6 can handle even the heaviest plates with precision. The crowned and hardened rollers are suitable for processing stainless steel, while the machine boasts a motorized drive powered by a 4 kW electric motor. Control is simplified with a foot switch, and the emergency stop safety rope ensures safe operation. You can trust the central lubrication system for reliable maintenance and operation. For those looking for quality Plate Rolling Machines, the KRM ST 20/6 stands out as a solid investment. Request a quote today to enhance your sheet metal processing capabilities with this exceptional 3-Roll Motor Plate Roller. Duedpfoqagtiex Afnjl

Condition: like new (used), Year of construction: 2018, sheet width 2050 mm plate thickness 3.0 mm distance between columns 2100 mm back stop - adjustable 550 mm no. of strokes 35 Hub/min cutting angle 2°12 table width 400 mm table height 850 mm Control konv. total power requirement 3.5 kW weight of the machine ca. 1280 kg dimensions of the machine ca. 2400 x 1500 x 1300 mm Current new price approx. 20.000 Euro from a maintenance workshop very little used - mint condition (!!) Dujdpfxjx Sr Dxo Afnel Equipment: - robust / powerful electro-mechanical guillotine shears - manual material backgauge * stepless adjustment range * adjustment from behind - by handwheel * including mm scale * max. adjustment range 550 mm - Manual kerf adjustment, from the front - 1x side stop - 1x support arms - 1x free-moving foot switch - rear sheet metal chute - rear safety device (light barrier) - Operating instructions (machine control)

Condition: ready for operation (used), Plate size: 1500 x 1000 mm Dedpfjx S H Rmox Afneul Plate thickness including ribbing: 108 mm Top plate thickness: 38 mm Table height above floor approx.: 1000 mm

Condition: new, functionality: fully functional, Year of construction: 2026, Electronically controlled, hydraulic four-roller bending machine Make FACCIN, model 4 HEL/S 2122 Technical specifications: Number of Reels: Four Geometry of the side rollers: linear guides Working width: 2000 mm Top roller diameter: 225 mm Lower roller diameter: 215 mm Side roller diameter: 165 mm Pressure force against the top roller: 100 tons Guaranteed installed power: 9.2 kW (12.5 hp) Guaranteed maximum turning speed: 4-8 m/min Guaranteed machine weight: 4,450 kg Length: 3,500mm Width: 1,200mm Height: 1,100mm Duodjd Eqg Hjpfx Afnsl Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 11 mm Bending capacity (full working width) 8 mm from a pipe diameter of 1,100 mm Rolling capacity (full working width) 8 mm Bending performance (full working width) 6 mm from pipe diameter 286 mm Standard equipment: Double linear guide system for roller movement Extremely wide bearing blocks MCS double bearing system for the roller rotation Extra heavy double hinged folding bearing Electronic parallelism system EPS Hardened rollers for high wear protection All rolls ground after heat treatment Siemens S7 PLC control Hitech hydraulic and electric package Safety trip wire with emergency stop and CE certification central lubrication cone bending device Optional equipment included: CNC control PGS-ABSOLUTE

Condition: excellent (used), Year of construction: 2001, sheet width 3100 mm plate thickness 6.0 mm ST pre-bending 4.0 mm ST diameter of upper rolls 200 mm side roll diameter 165 mm diameter of lower rolls 190 mm bending speed ca. 5.0 m/min Control DIGI oil volume 80.0 Liter voltage 380 V total power requirement 6.0 kW weight 6000 kg range L-W-H 5250 x 1500 x 1400 mm very good condition (!!) Current new price approx. 80,000 euros Special price on request Features: - Robust electro-hydraulic 4-roll bending machine * 4-roll concept offers a wide range of bending and rounding options - MG swivel control panel * Operation - control of all rolls and machine axes Dedpex Sr Dfjfx Afnsul * Digital position display * Manual operation via joysticks - Two central rolls are driven directly by hydraulic motors - Conical rolling possible via inclined position of the rolls - Parallelism of the side rollers via torsion shafts - Bending on both sides - Diameters of up to 1.1 times the upper roller diameter are possible - Forged and hardened rollers with a strength of 53-55 HRC - Low-maintenance, stable machine concept - Permanent lubrication of all bearings - Stable steel welded construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge/pressure display for the rollers - Safety device (safety line with switch unit) - Operating instructions (PDF)

Condition: ready for operation (used), Plate size: 2000 x 1000 mm Plate thickness including ribbing: 250 mm Top plate thickness: 30 mm Dujdpfjx S H I Ssx Afnol Table height above floor: 870 mm including intermediate plate, 1700 x 650 mm