Used Plates Sage for sale (14,751)

Condition: used, Year of construction: 1962, functionality: fully functional, Adolf John Hanau AB II Timber saw Wood saw Trimming saw center height 105mm, column throat 650mm, 160mm width, conveyor belt 5-45m/min From first owner ! Weight with conveyor approx. 1250Kg Gjdpfjuprqwex Afisuh Connection to 400A 32A Used, functional condition

Condition: used, functionality: fully functional, For sale is a combination of two saws connected to a Bargstedt warehouse: HPP380 + HPL380 (including slotting table) + TL420 Godpswkhcbsfx Afijuh

Condition: good (used), Steel floor plates Length: 2210 mm Width: 1500 mm Thickness: 260 mm With T-slots in both directions Weight: approx 2 T 6 same plates available. Gusdpfxjv Amdpj Afieh

Condition: ready for operation (used), total width: 2,011 mm, X: 1000 - Y: 1500 - Z: 800 mm power: 3.2 kW Guodpfoxl Hxujx Afijh Renishaw control laser control Lenght: 3259 mm Thickness: 3510 mm

Condition: good (used), pressing force: 95 t, cylinder diameter: 90 mm, plate width: 1,350 mm, Veneer Press Joos Type: HP 90 with 2 intermediate plates, stacking automaton, and lift table Pressing area: 2,550 x 1,350 mm Intermediate plates: 2 pcs. Pressing pressure: 95 t Piston diameter: 90 mm Specific pressing pressure: 2.75 kg/cm³ Number of cylinders: 4 Heating medium: hot water Total power: 1.3 kW Safety device: emergency stop rope Press dimensions: 3,000 x 1,530 x 2,200 mm Press weight: approx. 4 t Elkom heating plates in very good condition Scissor lift table The plates are stacked and thus unloaded automatically. Gedpfoxnqq Hox Afijuh

Condition: used, Please submit inquiries exclusively by email or directly via Machineseeker. Godpfsxmfbdex Afieuh

Condition: good (used), Included in the delivery: 01x Base plate, new Manufacturer: Arestant NS Type designation: STD Base Plate BP80 Material finish: Sendzimir galvanized For frame profile width: 80 mm Material thickness: 6.00 mm Total width: 118 mm Total depth: 150 mm Height: 45 mm Number of mounting holes: 03 pcs. Hole diameter: 13 mm Weight per unit: 0.83 kg / pc. Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about this item: Guedpfxsxgp E To Afieh This item is offered for collection only. If transport or shipping is required, additional costs will apply, which can be requested from us depending on the delivery location and scope of supply.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 4,000 mm, overall weight: 820 kg, load capacity: 500 kg, The offer includes the following set: (it is possible to customize device parameters or purchase the vacuum lifter or crane separately) - Vacuum lifter for boards, designed among others for MDF, laminated, raw and chipboard panels, etc. (model WOOD SYSTEM DS 250) - Stationary jib crane - Electric chain hoist - Manual trolley Features of the WOOD SYSTEM DS 250 vacuum lifter: - Designed for panel handling - Actuator for vertical-horizontal rotation - Six suction pads, Ø 200 mm - Adjustable suction pad positioning to adapt to varying panel dimensions - Traverse length: 2500 mm - Each suction pad equipped with a ball valve – allowing individual suction pad control - Compressed air pulse function to prevent material stickiness effect - Individual adjustment of each suction pad in X and Y axes - Gripper control via console (control panel): - Aggregator on/off - Vacuum suction/release - Electric hoist thumb control – raising/lowering the lifter - Manometer - Powered by compressed air – fitted with vacuum generators - Lifting capacity: 400 kg - Device weight: 100 kg - CE certificate Stationary jib crane – technical data: • Column height: 4 m • Height under jib: 4 m • Jib length: 4 m • Lifting capacity: 400 kg • Slew range: 270 degrees • Lifting speed: approx. 3 m/min • Any RAL color available Gjdsxln Drepfx Afieuh • Manual rotation • Manual trolley • Quadruple / double needle bearing for easy swing • Chain hoist: electric • CE certificate INCLUDED IN PRICE: • Column-mounted jib crane • 1-phase electric hoist • Manual trolley • CE certificate • Complete documentation Standard warranty: 12 months

Condition: used, WIDTH 1250 MM DEPTH 1700 MM HEIGHT 5000 MM (3000 + 2000) Gsdpfxet Hryms Afisuh NR 20 T-SLOTS

Condition: ready for operation (used), Metris Measuring table Guedpexl Hxnsfx Afieh

Condition: used, 2 clamping plates, 1 pair of clamping bars with T-slots Gsdpfx Afoxf Uwljisuh Clamping block, press table, auxiliary table with T-slots Length of each clamping bar: 900 mm Width of each clamping bar: 295 mm Thickness of each clamping bar: 130 mm - 6x T-slots, 30 mm - T-slot spacing: 150 mm - 6 holes Ø 18 mm (spacing 300 x 160 mm) - All faces machined Net weight per clamping bar: 240 kg Good condition

Year of construction: 2022, condition: used, New: Yes Field of application: Internal logistics Guedpfxoxii Ito Afijh Empty weight: 5 kg Part suitable for: machines Type number: 492-0464, 369-3869, 357-0147, 56 CAT320 Hose + cap engine oil filler + plates Caterpillar OEM : 492-0464, 369-3869, 357-0147, 561-6443, 562-2944 Article nr.: L070013006N-veiling Hose + cap engine oil filler + plates Caterpillar

Year of construction: 2005, condition: excellent (used), Magnet plates Year of manufacture: approx. 2005 LxW: 70x75 cm Gusdpfx Afsxhh Sbeijh

Condition: new, Year of construction: 2025, functionality: fully functional, load capacity per storage section: 3,000 kg, total length: 3,280 mm, total height: 2,870 mm, total width: 3,300 mm, shelf height: 80 mm, warranty duration: 12 months, shelf length: 1,540 mm, load capacity: 30,000 kg, carrying capacity per cantilever arm: 3,000 kg, overall weight: 2,500 kg, load per truss pair (max.): 3,000 kg, frame width: 3,300 mm, number of shelf rows: 10, Sheet metal rack / high-capacity steel storage support system Main features: - Rack doors are equipped with safety mechanisms during shelf extension; the shelf is locked in both closed and extended positions Gedpfx Afexhd Tbjijuh - Frame and door guides are linked, enabling the shelf to roll out on rollers - The shelf can be extended to 100% of its depth The rack specification provides exact values; it is possible to adapt the product to the individual requirements of the customer.

Condition: used, Year of construction: 2006, operating hours: 14,486 h, CE mark: yes Serial number: 71xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20519 Specifications: Gusdpfxowph Dpj Afish - 2006 model - 14486 hours - Certified to: 12/25 - 224 kW - 15600 kg - Tires (see pictures) - Heater defective - Articulated steering - Central lubrication - 6x6 - Serviced by myself - Locking device - Speedometer defective - Lights - Air conditioning - Radio - Ready for delivery Description: We have a 2006 Moxy MT26 w/ white plates for sale. There is a defective heater and speedometer. Apart from this, everything works as it should according to the owner. Services have been performed by the owner continuously. Ready for delivery HK: 304 Hours: 14486 Own weight: 15600 Total Weight: 45500 Year controlled: Yes Year controlled until: 12/25 Width: 275 Length: 949 Kw: 224 CE: Yes Model: MT 26

Condition: ready for operation (used), total width: 1,150 mm, Zeiss 1320 x 1150 mm Gusdpsxgv E Hefx Afish Lenght: 1320 mm

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, STOCK MACHINE: Working direction from left to right – Subject to prior sale – HECHT Exenso Profi Saw Cutting Center ESA-9 Comprising: Infeed: - Robust aluminum construction in proven profile design - Ergonomically adjustable working height from 985 – 1055 mm - Raw bar length from min. 400 mm up to max. 6,000 mm (optional extension kit available for up to 6,500 mm) - Material supply via chain conveyor for fully automated 9-compartment loading - Working direction from left to right Professional Cutting Saw: - Automatic bandsaw with pneumatic clamping system, consisting of 3 clamping elements - Infinitely variable saw feed via hydraulic unit - Workflow controlled via Exenso control system - The sawing area is secured at the front by a light curtain. - Bandsaw drive: 1.5 kW, frequency-controlled - Bandsaw dimensions: HBS 250 G 3320 x 27 x 0.9 mm, long service life - Cutting speed: in regulated operation 15-110 m/min - Cutting range: width 10-120 mm, height 10-80 mm Outfeed: - Robust aluminum construction in proven profile design - Ergonomic removal height from 760 – 820 mm (Note: not adjustable independently from working height) - Part outfeed via powered roller conveyor with steel rollers - Roller-guided ejection unit across three levels onto inclined discharge table - Maximum part length via automatic outfeed: 3,500 mm (optional extension kit available for working length up to 4,500 mm) - Scrap disposal via ejection unit – max. length 600 mm - Scrap pieces discharge via chute into customer-provided waste container (Note: waste container not included) - Remnant identification indicated at placement position for manual collection by operator Software / Data Interface: - HECHT Exenso ESA software (version specified after joint pre-acceptance) Operation: - Reinforcement bars are loaded onto the feed magazine in the infeed section by the operator according to specifications/display. - Transmission of the required cut lengths for the PVC cutting center from customer’s window manufacturing software via integrated data interface - Steel is automatically conveyed and fed - Optimized cutting to the specified lengths - Transport of steel to the pick-up position in the outfeed section - Optionally, double cuts can be made upon inspection Scope of delivery: - Bandsaw - Infeed conveyor - Outfeed conveyor - Light curtain - Control system with Win 10 and 15" touch screen - Data interface REST API can be adapted to an existing cutting center after inspection - The system is disassembled into several packages for transport Includes: 540.1082 1x Guard fence wall connection set with door switch ESA/SSA, usable right or left; 723.5011 1x bandsaw blade M42 3320x27x0.9 12-16 TPI, fine; 942.5541 1x minimum quantity lubrication for ESA & SSA saw systems – significantly extends bandsaw blade service life; Includes: minimum-quantity lube nozzle, 1L lubricant, holder for lubricant, filter for protection against contamination; 829.0201 1x additional buffer monitor for steel terminal ESA/SSA, additional display. Gsdpfsxft I Asx Afiouh

Condition: new, Year of construction: 2025, Set of jaws for Metso LT120, QUARRY TOOTH Gjdpfxjpit Rbe Afiouh Fixed jaw MM0521203 18%Mn2%Cr - 2120 kg Swing jaw MM0521201 18%Mn2%Cr - 1875 kg Very good quality castings ALL CASTING CHECKED WITH SPECTROMETER, TO PROOF BEST QUALITY Price for set EXW Poland, worldwide shipping can be arrange

Condition: new, HEIDELBERG steel die-cutting plates for KS 38/52 cm, KSB 40/57 cm, KSBA 46/58.5 cm, OHZ 54/72 cm, SBG 56/77 cm. HEIDELBERG T 26/38 cm platen, Printing plate GTO52, GTO46, KOR, KORD, KORS, MO. BRAND NEW AT HALF PRICE!!!! Gjdpfexfqwusx Afieuh

Condition: good (used), Offer 24132 + 24133 Technical data approx: - 2 pieces T - groove plates total approx. 4970 x 3880 mm - Clamping plates - length approx. 4970 mm each - Clamping plates - width approx. 1940 mm each - Top panel thickness approx. 90 mm - Panel thickness with ribbing 200 mm - 4 T - longitudinal grooves L 4970 mm each - Distance from outer edge to center of T-slot 110 mm - Distance between the T-slots 550 mm - T-slots for T-nuts M 24 - Lateral holes to connect the two panels together Gusdpjtiybxefx Afieh - Weight per panel approx. 6000 kg - Total weight approx. 12 T.

Condition: used, mileage: 423,698 km, Year of construction: 2011, Serial number: YS2R6X4000206xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20486 Specifications: Guodpfswphxgox Afish - 2011 model - 423,698 km (will increase slightly) - Euro 5 engine - 560 hp - 6x4 - Manual transmission - Front suspension: steel - Rear suspension: steel - Istrail box - Tires (see pictures) - Air conditioning/ac - Diesel heater - Radio - Lights - Ready for delivery Description: We have a 2011 Scania R560 6x4 tipper truck w/black plates for sale. The car works as it should according to the owner. Services have been taken continuously by the owner. Ready for delivery Km: 423698 HK: 560 Own weight: 13590 Total Weight: 30000 Payload: 16335 Width: 255 Length: 742 Euro: 5 Gearbox: Manual

Condition: good (used), div. face plates from 400 mm - 800 mm Godeipidhspfx Afijuh

Condition: used, mileage: 628,277 km, power: 390 kW (530.25 HP), first registration: 10/2018, fuel type: diesel, color: black, axle configuration: 3 axles, gearing type: mechanical, emission class: euro6, Year of construction: 2018, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, FAT XF 530 SSC DEEP BLACK (46185) Riedler stake body Penz timber crane 15Z9.50 H1/B4 Grapple with chainsaw Central locking Electrical connection for trailer, 24 V/15-pin Rear axle 1: 315/80R22.5 Front mirror Automatic idle shutdown, 5 minutes Rear: 2 x 13.00 t, air suspension, SR1360T Parking heater with waste heat pump and timer Basic immobilizer Traction control (ASR) Rear suspension 26.0 t / Brakes 26.0 t Rear axle 2: 315/80R22.5g Spring-actuated brake chamber, first front axle Drive rear axle with disc brakes Interior trim color: Dark Sand Cab interior finishing: Piano Black Passenger seat: Basic Luxury sound system with 6 speakers Steel air tanks Adaptive cruise control with FCW and AEBS Electronic Stability Control (VSC) Driver’s seat armrest Glass sunroof, electric operation Lane departure warning system Electric windows Pollen filter Mechanical differential lock LED daytime running lights Universal FMS connector Driver Performance Assistant Upper sleeper bunk Exterior sun visor, green transparent Air-suspended cab MX-13 engine, 390 kW / 530 hp Cab emblem: 530 Reverse warning system Cab - Super Space Cab MX engine brake and ZF Intarder Auxiliary power supply: 12V/20A, 24V/2x15A + 2x40A Rear axle ratio 3.40 LED headlights LED rear lights Front axle 1: 385/65R22.5 16-speed manual transmission 16S25.. OD, 13.80-0.84 Emission class Euro 6 Front: 9.00 t, parabolic, standard, 183N Second transmission PTO NL/1b-Z Wheelbase 5.55 m / rear overhang 3.75 m Spring brake chamber on rear axle 1 & 2 First transmission PTO N.../10c-O-37/30 Cool box or refrigerator Skylights Xtra Comfort mattress, lower bunk Automatic cab climate control AdBlue tank 75 liters, left chassis side Truck phone ECAS remote control with extended functions Navigation preparation Driver’s seat: Luxury Air Analog superstructure signals and warnings Front axle 1, 9000 kg, load index 160 Axle load monitoring Steering wheel, leather, color black CAN J1939 functions in the body interface Lower sleeper bunk with 65-liter drawer Antennas: AM/FM, 2x GSM, GPS. Extra: CB Fog lights and cornering/turning lights R1, 315/80R22.5 R2, 315/80R22.5 SP, 315/80R22.5 F1, 385/65R22.5 Tank 750 L, left 2 rotating beacons on light bar 4 Hella roof spotlights Bycool compressor parking cooler, rear-mounted Light-Fix bar SSC E6 Switch in cab for constant power to truck reverse light Steering axle lock switch (trailer) Gjdpfx Ajxc R S Hsfijuh Lift axle switch (trailer) Compressed air gun with cab mounting CB radio, 40 channel XXL storage table XF Euro6 Marlen

Condition: used, total surface approx. 33,54 m² 6 plates 2,000 x 1,290 mm Guodoc S R H Nspfx Afijh width of T-slots 30 mm thickness of the plates 95 mm weight approx. 1,700 kg per plate - price per plate -

Condition: used, Year of construction: 1980, length 3500 mm width 1750 mm thickness of bolster 260 mm Gujdpfx Aow U Eilofish number 2 St no. of flutes 6 weight 5 t 2 pieces T slotted floor plates with 6 slots, each 36 mm width. All dimensions and price is only for one plate !