Used Forge-Plate for sale (12,111)

Condition: ready for operation (used), Perforated plate Manufacturer unknown Dimensions 1500x1500mm Working height 940mm --height adjustable-- Screwed feet Bledpfxefpgp Es Aafec Plate thickness 110mm Hole diameter 45mm Weight approx. 2.0 tons

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 max sheet width: 1050mm max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Bjdpfxowk Rlxe Aafolc Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm weight: 240kg

Condition: not inspected (used), functionality: unexamined, overall weight: 150 kg, total length: 640 mm, total width: 640 mm, total height: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned due to the liquidation of a business. Submitting a bid binds you to timely collection between 26/01/2026 and 29/01/2026! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 640 mm x 640 mm x 1,500 mm Weight: 150 kg EQUIPMENT Height gauge Bsdpfx Aoxqqlcsafslc Vice with 100 mm jaw width

Condition: good (used), Cast iron bed - Floor Plate Useful surface (L x W x H): 3600 x 1200 x 300 mm 4 T-slots: width 44 x 26 mm Equipped with Levelling feet Weight: approx 3 T Bljdpfx Aeh Auahjafec

Condition: used, Cast iron bed Length: 2300 mm Blodpfx Aajwtc Hgsfsc Width: 1900 mm Thickness: 200 mm Height on feet: 980 mm 5 T-slots horizontal and vertical T-slots dimensions: 60 x 35 mm Square dimensions: 365 x 365 mm Crack at a longitudinal T (see photo) Weight: approx 3 T

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Length: 2600 mm Width: 2000 mm Bsdewlhd Uepfx Aafelc Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 12 leveling feet Weight: approx 4,5 T

Condition: good (used), Marble plate Bedpfx Aoig Hu Noafolc Length: 3500 mm Width: 1500 mm Thickness: 300 mm Height on feet: 930 mm Number of feet: 5 feet 1 small failure on the top (L 150 mm x W 20 mm) - see photo Weight: approx 3 T

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Blodjwlhflspfx Aafec Slots spacing: 250 mm Equipped with 12 leveling feet Weight: approx 4,5 T

Condition: used, Cast bed Length: 2410 mm Width: 1500 mm Thickness: 550 mm 8 T-slots 50 x 27 mm with 2 opening (possibility to close them) 1 opening L 560 x W 500 mm 1 opening L 480 x W 360 mm Weight: approx 5 T Blsdpfx Aswnfz Njafjc

Condition: used, functionality: fully functional, machine/vehicle number: 7FBMF35-16267, Year of construction: 2013, operating hours: 6,500 h, load capacity: 3,000 kg, lifting height: 4,700 mm, fuel type: electric, mast type: triplex, Electric Forklift Truck – Toyota Year of manufacture: 2013 Technical data: • Model: Toyota 7FBMF30 • Load capacity: 3,000 kg • Drive: Electric (battery powered) • Mast type: Triplex with free lift • Lift height: approx. 4,300 – 4,800 mm • Fork length: 1,070 mm (standard) • Tyres: Solid rubber • Cabin: Open design, optionally with driver protection roof • Condition: Used, serviced and fully functional Bjdpsw Hhwwsfx Aafslc

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, machine/vehicle number: 2roll 1250x3 mm total bend, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: siemens, controller model: simatic hmi, number of rollers: 2, roller (bottom) diameter: 350 mm, roller (top) diameter: 100 mm, roller length: 1,250 mm, working width: 1,250 mm, roller height adjustment: 30 mm, working height: 700 mm, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, overall weight: 2,800 kg, total length: 3,500 mm, total width: 1,000 mm, total height: 1,200 mm, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: centralized greasing system, documentation/manual, emergency stop, Plate bending machine 2-roll pinch total bend in one-turn. Make Faccin model HCU 1250 x 3 mm year 2009 Plate sheet max width 1200 mm Plate thickness up to 3 mm Machine fully hydraulic operated Hydraulic power unit with 5,5 kw electric motor Top roll size 100 mm Lower pinch roll size 350 mm urethane rubber coated Automatic rolling sequence programmable Vertical support hydraulic adjustable to the diameter to hold in place the round formed plate. Set of mandrel tubes interchangeable slip-on to change the rolling diameter Bodpfxjygxm Uj Aafelc Console electric commands for manual use and automatic programmable bending cycle Safety and emergency stop system installed Manuals and schematics with the machine

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, machine/vehicle number: 4roll 2600x16 mm, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: parmigiani, controller model: 4axis nc programmable, number of rollers: 4, roller (bottom) diameter: 270 mm, roller (top) diameter: 290 mm, side roll diameter: 220 mm, roller length: 2,600 mm, working width: 2,500 mm, roller height adjustment: 45 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 16 mm, overall weight: 7,500 kg, total length: 4,450 mm, total width: 1,330 mm, total height: 1,400 mm, power: 18 kW (24.47 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 4, Equipment: centralized greasing system, cone bending device, emergency stop, hardened rollers, 4roll hydraulic plate bending machine Parmigiani VBH 2500 X 16_12 mm Used ( year 2009 ) , in optimal working condition Capacity plate width 2500 mm Plate thickness 16 mm Prebend 12 mm rated on plate yield 260 MPa min rolling dia. ID 330 mm -- Upper roll 290 mm Pinch roll 270 mm Surface useful on rolls 2600 mm Power supply 380/50 Electric motor 18 Kw on hydraulic unit Bljdsygxldjpfx Aafoc Configuration Hardened rolls very high surface resistance Conical bending attachment Digital position readout of the 4 rollers NC programmable automatic plate roll Hydraulic driven two central rollers Hydraulic motion of side rollers individual in guideways dual initial pre-pinch Open front drop-end hydraulic to unload the closed shells Safety and emergency installed Manuals and schematics with the machine weight 7500 Kg layout mm 4450X1330 X H1400 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, machine/vehicle number: 09233-K06P27, working width: 3,100 mm, stroke rate (max.): 10 1/min, sheet thickness (max.): 16 mm, distance between stands: 3,400 mm, working height: 900 mm, TECHNICAL DETAILS Sheet width: 3,100 mm Sheet thickness: 16 mm Frame gap: 3,400 mm Shearing angle: 2.5° Working height: 900 mm Backgauge: 1,000 mm Hold-downs: 14 units Strokes per minute: 10 MACHINE DETAILS Control: CYBELEC CybTouch 6 Total power requirement: 30 kW Dimensions & Weight Space required: approx. 4,150 x 2,360 x 2,450 mm Bsdeygw Epspfx Aafolc Machine weight: approx. 16,400 kg Oil capacity: 500 l EQUIPMENT Electric backgauge 1,000 mm Electric cutting gap adjustment Electric cutting angle adjustment Cutting length limitation Light barrier at rear of machine Finger guard at front Ball rollers in support table 1x side stop 2x front support arms Foot switch

Condition: excellent (used), Year of construction: 1990, overall weight: 17,500 kg, total height: 500 mm, total length: 6,000 mm, total width: 3,000 mm, plate width: 3,000 mm, Floorplate Length:6000mm Floorplate Width:3000mm Length: 6000mm Width: 3000mm Height: 500mm Weight: 17500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Bsdpfeygwa Tsx Aafjlc

Condition: excellent (used), Year of construction: 2011, control type: NC control, number of rollers: 4, roller (bottom) diameter: 270 mm, roller (top) diameter: 290 mm, side roll diameter: 250 mm, roller length: 3,100 mm, working width: 8 mm, sheet thickness (max.): 8 mm, overall weight: 8,200 kg, total length: 6,200 mm, total width: 1,800 mm, total height: 3,900 mm, power: 8 kW (10.88 HP), Rolling width: 3100mm Rolling thickness 3x toproll Ø:10mm Rolling thickness 5x toproll Ø:14mm Rolling thickness prebending: 8mm Top Roll Ø: 290mm Bottom Roll Ø: 270mm Side roll Ø: 250mm Number of rolls: 4 Rolling speed: 1 - 5 Top support: yes Power: 8kW Length: 6200mm Width: 1800mm Height: 3900mm Weight: 8200kg Bsdpfx Aoygvwdsafelc Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Used Sondex model SF229-IS stainless steel plate heat exchanger. Transmission surface approximately 360 m2. Hot side is rated min/max allowable pressure -1/10 bar at min/max allowable temperature -20/165°C. Cold side is rated min/max allowable pressure -1/10 bar at min/max allowable temperature -20/165°C. Blodpfx Ajygvbpoafjc

Condition: used, Used Seitz Enzinger Noll reportedly model 60/150 type C stainless steel filter press. Unit has (67) 600mm x 600mm stainless steel plates and (1) stainless steel end plate which will accomodate (66) filter sheets giving approximately 22m2 filtration area. Unit is type C with central tightening device via spindle and capstan handle. Bedjygu Unopfx Aafjlc

Condition: good (used), Year of construction: 1982, Cutting length 4.300 mm Bjdpoygm Tiefx Aafjlc Cutting height 1.800 mm machine weight ab. ca. 600 kg kg

Condition: used, Hydraulische 4 Plattenspresse - Hydraulic 4 Plates Press Lechner IV B Baujahr / Year 1976 - Serial-No. 1214 4 Pressplatten  / Size with 4 pressure plates Bsdpfxewhgaas Aafolc Pressfläche / Press size: 1 Pressplatte / 1 Press Plate 440 x 280mm - 2 Pressplatten / 2 Press plates 610 x 440mm Pressdruck regulierbar / Pressure adjustable max. 6000KG Platzbedarf  (Höhe-Breite-Tiefe) / Place require 140 x 155 x 51cm Gewicht / weight 780kg Elektr. Antrieb / eletric power 400 Volt, 3 Ph, 50 Hz., 1,1 kW Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Druckpalttenstanze  - Plate Punch Bacher 2048 Palttenstanze / Plate Punch Bacher 2048 Serial-No. 277 Druckplattenstanze für Heidelberg SM74, SORM Plate Punch for Heidelberg SM74, SORM Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Blsdpexg D Dwefx Aafsc On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Druckplattenbelichter - Plate Exposer O.M.S. COPYSTAR 4050 Serial-No. 93-2023 Format / Size max. 400 x 500mm Bjdpfx Aev Am Rvsafolc Voltage 230V AC - 2800W Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, machine/vehicle number: 16072, Fotodirekte Offset-Druckplattenkamera - Plate Exposer Heidelberg QUICKPLATER 40 Foliendicke / Foil thickness 0,1 - 0,2 mm Folienstanzfunktion (nur Langformat) / Foil Punch System (only lengthways format): Heidelberg Quickmaster 46, d. h. zwei U-förmige Löcher mit einem Abstand von 220 mm symmetrisch zur Mitte der Folienvorderkante Folienformate / Foil Size: Querformat / landscape format max. 404 x 510mm Langformat / Long Size: max. 350 x 510mm Querformat / landscape format min. 222 x 250mm Vorlagenformat / Template format max. Bei Verkleinerung auf / when reduced to 70,7 %: 440 x 614mm Bei Verkleinerung auf / when reduced to 64 %: 448 x 575mm Motivformat auf der Folie / Motiv format on Foil max.: 1:1 Querformat / landscape format: 350 x 505mm 1:1, gestanztes Langformat / punchd long size: 350 x 480mm 1:1, ungestanztes Langformat / not punch long size: 350 x 469mm 70,7 %, Lang/Querformat / Long/landscape format: 311 x 434mm Bledsh Axk Iepfx Aafoc 64 %, Lang/Querformat: Long/landscape format:287 x 370mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1999, Druckplatten - Entwicklungsmaschine / Plate Processor AZ FEYear 1999 - Serial-No. XX158 Working width max. 300mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Bljdpjh Ax R Ujfx Aafec On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2002, machine/vehicle number: 98, Heizplatte / Heating Plate Busse HPT 900W Serial-No. 98 822 Heiztemperatur einstellbar / Heating temperature adjustable Arbeitsfläche / Working area max. 350 x 650mm 5 Trockenklammern / 5 Drying clamps Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Bljdsupy S Nopfx Aafoc

Condition: used, First registration: 23/05/1980, vehicle identification number: 10628, permitted gross weight: 40,000 kg; NOTE: The low loader’s registration documents are missing. A statutory declaration of loss by the owner, required for the application of new documents at the relevant road traffic authority, is available and will be handed over to the highest bidder or buyer of the low loader! Blsdpsyf R Easfx Aafoc