Used Plate Development for sale (15,468)

Condition: good (used), Cast iron bed - Floor Plate Useful surface (L x W x H): 3600 x 1200 x 300 mm 4 T-slots: width 44 x 26 mm Csdpfx Adoh Auahskshc Equipped with Levelling feet Weight: approx 3 T

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, sheet thickness (max.): 1 mm, bending length: 1,050 mm, roll metal bending machine Isitan 1050 X 1.2mm Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 max sheet width: 1050mm max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Chjdswk Rlxjpfx Adkjc Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm weight: 240kg

Condition: used, functionality: fully functional, machine/vehicle number: 7FBMF35-16267, Year of construction: 2013, operating hours: 6,500 h, load capacity: 3,000 kg, lifting height: 4,700 mm, fuel type: electric, mast type: triplex, Electric Forklift Truck – Toyota Year of manufacture: 2013 Technical data: • Model: Toyota 7FBMF30 • Load capacity: 3,000 kg Chodsw Hhwwjpfx Adksc • Drive: Electric (battery powered) • Mast type: Triplex with free lift • Lift height: approx. 4,300 – 4,800 mm • Fork length: 1,070 mm (standard) • Tyres: Solid rubber • Cabin: Open design, optionally with driver protection roof • Condition: Used, serviced and fully functional

Condition: good (used), 1 x Food engineering development incline conveyor. Chedpfovwci Dex Adksc

Condition: used, Cast iron bed Length: 3300 mm Width: 2000 mm Thickness: 240 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 20 leveling feet Weight: approx 5,5 T Chodpfx Aowlhgcodksc

Condition: used, Cast iron bed Length: 3300 mm Width: 2000 mm Thickness: 240 mm 8 T-slots Cedpfxeww H Nto Adkohc T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 20 leveling feet Weight: approx 5,5 T

Condition: used, Cast iron bed Length: 3300 mm Width: 2000 mm Thickness: 240 mm 8 T-slots T-slots dimensions: 55 x 35 mm Chsdpfx Adjww H I Askec Slots spacing: 250 mm With 20 leveling feet Weight: approx 5,5 T

Condition: good (used), Marble plate Length: 3500 mm Width: 1500 mm Thickness: 300 mm Chjdpfx Asig Hu Nodkec Height on feet: 930 mm Number of feet: 5 feet 1 small failure on the top (L 150 mm x W 20 mm) - see photo Weight: approx 3 T

Condition: used, Cast iron bed Length: 2300 mm Width: 1900 mm Thickness: 200 mm Height on feet: 980 mm 5 T-slots horizontal and vertical T-slots dimensions: 60 x 35 mm Cedpfjwtc Hgjx Adkshc Square dimensions: 365 x 365 mm Crack at a longitudinal T (see photo) Weight: approx 3 T

Condition: used, Cast bed Length: 2410 mm Width: 1500 mm Thickness: 550 mm Chsdpfxewnfz Ne Adkjc 8 T-slots 50 x 27 mm with 2 opening (possibility to close them) 1 opening L 560 x W 500 mm 1 opening L 480 x W 360 mm Weight: approx 5 T

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Cedpfx Aowlhfledkjhc Slots spacing: 250 mm Equipped with 12 leveling feet Weight: approx 4,5 T

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Chedpjwlhd Ujfx Adkoc Slots spacing: 250 mm Equipped with 12 leveling feet Weight: approx 4,5 T

Condition: good (used), 110 CM X 90 CM X 90 CM Plate Used in tos machine Chedpjurv E Defx Adksc

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, machine/vehicle number: 6922191908, controller model: Cybelec D-Touch-7, working width: 4,100 mm, sheet thickness (max.): 6 mm, back gauge: 1,000 mm, overall weight: 10,470 kg, TECHNICAL DETAILS Cjdpfoxgdl Ijx Adkshc Max. working width: 4,100 mm Max. sheet thickness: 6 mm Backgauge: 1,000 mm MACHINE DETAILS Control type: Cybelec D-Touch-7 Dimensions & Weight Dimensions (L x W x H): 5,100 mm x 2,300 mm x 2,400 mm Motor power: 11.0 kW EQUIPMENT Pneumatic sheet support CE marking

Condition: used, Year of construction: 2012, sheet width 1530 mm plate thickness 3.5 mm thickness at "Niro-steel" 2.0 mm no. of strokes max. 34 Hub/min cutting angle 2.70 Grad distance between columns 1540 mm work height max. 920 mm voltage 400 V Control konv. engine output 3.2 kW weight of the machine ca. 1115 kg. range L-W-H 2275 x 2220 x 1400 mm Machine from a maintenance workshop Chjdpfjxab A Djx Adksc Current new price including accessories approx. 25.000 euros Special price on request Equipment: - robust / motorized swing cut guillotine shears - break-proof, torsion-free steel welded construction - compact and clear machine design - electro-motorized back stop, with analog position display * adjustable from the front * stepless adjustment over the entire travel range - 1x hold-down bar - 1x freely movable foot switch - front, extendable table extension - rear safety device - operating instructions (PDF)

Condition: ready for operation (used), Plate size: 2000 x 2500 mm Plate height incl. ribbing: 250 mm Chedpfxsxlg T Ss Adkec Weight:

Condition: new, Year of construction: 2025, Schnittbereich quadratisch (B x H): 2600 x 100 mm Kürzeste Länge des abgeschnittenen Stücks : 1100 x 20 mm Kürzeste Reststücklänge im automatischen Betrieb*: 400 mm Chodsxlcauspfx Adksc Kürzeste Reststücklänge im Einzelschnitt: 40 mm Electrical connected load: 34 kW Leistung des Sägemotors: 18,5 kW Leistung hydraulischer Motor: 7,5 kW Schnittgeschwindigkeit stufenlos regelbar: 20-100 rpm Saw feed speed: 1-700 mm / min Höhe der Materialauflage: 720 mm Sägeblattdurchmesser: 425 mm Sägeblattbohrung: 50 mm Sägeblattdicke: 2,7 mm Length: 12000 mm Breite inkl. Späneförderer : 6300 mm Height: 3000 mm Weight of machine approx.: 28000 kg Standard configuration Variable blade speed controlled by inverterPrecision feed pressure & feed rate dual valve systemServo feeding motor with precision ball screwCombined guides with bearingsOil mist cooling de anti-vibration deviceP.L.C. control for all electric and hydraulic raulic pump with three-phase motorTwo sets of horizontal and vertical clamping devicesAdjustment baseRoller table

Condition: used, Year of construction: 1980, Hydraulic guillotine shears, Kramer type TM III HY 2500 Cutting capacity 2500 mm Cutting thickness 12 mm elketr. backgauge Cutting gap adjustment Chsdpfjrfwyrox Adkoc

Condition: good (used), functionality: unexamined, machine/vehicle number: 1873, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 1,250 rpm, total width: 1,600 mm, total length: 4,500 mm, total height: 2,500 mm, spindle diameter: 500 mm, overall weight: 8,000 kg, TECHNICAL DATA & EQUIPMENT: Machine number: 1873 Operating voltage: 380 V Rated current: 33.1 A Frequency: 50 Hz Spindle speed: 10-1250 rpm Table dimensions: 1550 x 980 mm With 6 T-slots Travel distances: X: approx. 500 mm, Y: approx. 400 mm, Z: approx. 1000 mm The machine is equipped with a chuck Diameter: 500 mm Including a lot of various suitable accessories REFERENCE NUMBER 1 DIMENSIONS & WEIGHT: Chsdpew U Tlhsfx Adkec 4500 x 1600 x 2500 mm 8000 kg PICK-UP NOTES: The item will be available from September 2025. A pick-up date must still be coordinated for a specific day starting from 01.09.2025 FCA: 73235 Weilheim an der Teck (DE), loaded onto truck

Condition: new, Year of construction: 2025, neu 2025 090132 prompt, Zwischenverkauf v Türkei 47500 € 798.38 € 1 41800 € 3100 mm 6 mm Chsdpowiqyyefx Adksc 4 mm 50 mm 15 1/min 1,5 ° 16 14 to 1000 mm 200 mm/s 15 kW 200 l 2 Stk. 865 mm 500 mm 3515 mm 4110 mm 2200 mm 3700 mm 2100 mm 7300 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglength for economic processing Lower blade fourfold turnable Upper blade double turnable Oilfilling Light barrier on the back of the machine Qualified customer support User manual in GERMAN and ENGLISH according to CE rules WE HAVE MORE THAN 850 REFERENCES!

Condition: excellent (used), For sale: Professional turning and finishing holder with SK40 mounting, ideal for facing, finishing, and rough machining of end and flat surfaces. The high-quality tool steel construction ensures stability, rigidity, and high clamping precision. 📌 Technical data: • Type: Turning and finishing holder with insert • Mounting: SK40 DIN 69871 B • Dimensions: SK40 × 40 × 40 • Head diameter: Ø40 mm • Total length: approx. 60 mm • Condition: Used, very good technical condition – fully functional ✅ Advantages: Chjdpfx Aexizb Esdkoc • High machining accuracy and clamping rigidity • Suitable for use with indexable inserts • Designed for facing, finishing, and rough machining • Compatible with milling machines and machining centers with SK40 mounting

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 700 mm, Completely overhauled plate-type boring mill from a high-end aerospace company. New control cabinet New drives New CNC control system X / Y / Z: 1,200 / 2,000 / 700 mm (Longitudinal travel = X, Cross travel = Y, Vertical/Spindle axial = Z) Further details upon request. Technical Data Spindle Boring spindle diameter: 100 mm Spindle taper: ISO 50 Milling spindle diameter: 185 mm Spindle axial travel: 700 mm Automatic infinitely variable spindle and vertical feed: 2 × 1,000 mm/min Rapid traverse spindle and vertical axis: 5,500 mm/min Minimum spindle axis height above table: 0 mm Maximum spindle axis height above table: 1,500 mm Maximum distance spindle nose to table center: 1,850 mm Spindle speed ranges – Torque range: 5–14 rpm – Continuous power range: 15–1,450 rpm Number of speed ranges (continuous power): 4 Range values (rpm): 6–51 / 49–160 / 140–460 / 440–1,450 Table Rotary table dimensions: 1,100 × 1,300 mm Longitudinal travel: 1,200 mm Cross travel: 2,000 mm Automatic infinitely variable cross and longitudinal feed: 2 × 1,000 mm/min Rapid traverse longitudinal and cross: 5,500 mm/min Automatic infinitely variable table rotation: 30–100 °/min Rapid table rotation: 5,000 °/min Lifting data (assembly/transport) Required for group 1: – 1 steel bar Ø 70 mm × 1,600 mm length – 1 steel bar Ø 70 mm × 2,400 mm length – 4 rings for rope spacing – 4 wire ropes Ø 22 mm Weight group 1 approx. 12,500 kg For lifting group 2: – two wire ropes minimum Ø 18 mm Weight group 2 approx. 3,500 kg For lifting group 3: – use hand ropes Chsdpfexizccjx Adksc Weight group 3 approx. 1,300 kg

Condition: new, The KRM ST 20/6, a robust Plate Rolling Machine from KNUTH, is designed for exceptional performance in the category of 3-Roll Motor Plate Rollers. This heavy-duty machine is capable of bending workpieces up to 3000 mm in length, making it ideal for a variety of applications in metalworking, including steel and metal construction. With features like a solid, closed machine frame, a motorized rear roller, and an asymmetrical roll arrangement, the KRM ST 20/6 can handle even the heaviest plates with precision. The crowned and hardened rollers are suitable for processing stainless steel, while the machine boasts a motorized drive powered by a 4 kW electric motor. Control is simplified with a foot switch, and the emergency stop safety rope ensures safe operation. You can trust the central lubrication system for reliable maintenance and operation. For those looking for quality Plate Rolling Machines, the KRM ST 20/6 stands out as a solid investment. Request a quote today to enhance your sheet metal processing capabilities with this exceptional 3-Roll Motor Plate Roller. Chjdpeqagtisfx Adksc

Year of construction: 1983, condition: used, sheet width 1250 mm plate thickness 3,0 mm distance between columns 900 mm power requirement 2,2 kW dimensions 3,27 x 1,69 x 1,29 m weight of the machine ca. 1,6 t used compact mech. guillotine shear Cjdsnwr Dtspfx Adkehc - strokes per minute: 50

Condition: new, The KRM ST 30/5, a robust Plate Rolling Machine from KNUTH, is designed for exceptional performance in the category of 3-Roll Motor Plate Rollers. This heavy-duty machine is capable of bending workpieces up to 3000 mm in length, making it ideal for a variety of applications in metalworking, steel, and metal construction. With features like a solid, closed machine frame, a motorized rear roller, and hardened rollers, it provides reliable and precise results. The asymmetrical roll arrangement accommodates heavy plates, and its conical bending capabilities are enhanced by an adjustable rear roller. Moreover, it includes a user-friendly separate control panel with a foot switch for easy operation. Maintenance is simplified through central lubrication, ensuring long-lasting functionality. You can take advantage of the KRM ST 30/5 for your plate rolling needs; request a quote now and enhance your sheet metal processing capabilities. Chjdpfxjihvtgj Adkoc