Used Plates Car Swivel for sale (22,948)

Year of construction: 2022, condition: used, The plate swivel fixture simplifies handling when it comes to moving plates from a vertical to a horizontal position. The receiving frame is hydraulically adjustable in height and can also be swiveled. Support rollers facilitate movement in the horizontal position. Four swivel casters guarantee safe internal transport. Godsv T Ilvjpfx Ak Ujkb Technical data: Support height: • vertical: approx. 340-120 mm • horizontal: approx. 1200-890 mm Max. plate size: 5200 x 2100 mm Load capacity: 250 kg Location: Bad Wimpfen

Year of construction: 2026, condition: new, NEW – - Ideal for removing sheets from your vertical sheet storage system. - For internal transport of sheets to a vertical or horizontal sheet dividing saw. - The continuously adjustable support surface can be precisely adjusted to the height of your sheet saw. - Sheets weighing up to 250 kg can be transported or pivoted by a single operator. Technical data: Support height Gksded Tyaaopfx Ak Ueb - vertical: approx. 120 – 340 mm - horizontal: approx. 890 – 1200 mm Maximum sheet size: 5200 × 2100 mm Load capacity: 250 kg Location: In stock at 54634 Bitburg - immediately available - Will be shipped within Germany for €90.00 net.

Condition: good (used), machine/vehicle number: 26041, Offer 26041 Technical data (approx.): - Plate length approx.: 3000 mm - Plate width approx.: 2500 mm - Plate height without base frame approx.: 180 mm Gsdpfoyvrx Rex Ak Ujkb - Plate height with base frame approx.: 810 mm - Top plate thickness approx.: 115 mm - 11 T-slots in the table surface, length: 1500 mm - T-slot pitch in the table surface: 250 mm each - T-slot width approx.: 40 / 22 mm - T-slot depth approx.: 16 / 24 mm - Required space: L 3500 x W 2500 x H 1100 mm - Weight approx.: 4500 kg

Year of construction: 2021, condition: new, NIVEAU - Lifting table HS 300 midi with SCHWENKMAX - Plate swiveling device description: ᐳ mobile single scissors lifting table with plate ground frame and 4 drilling holes to receive the socket pins; 4 pieces of guide rollers, 2 of them with brake; Ø of rollers: 125 mm; operation on foot pump; load in kg: 300 weight in kg: 85 stroke in mm: 610 height in mm: 400 overall height in mm: 1010 sizes of platform in mm: 1200 x 740 Inclusive ! Schwenkmax - Plate swiveling frame with 2 layers of lock (vertical/horizontal) for plate weight up to 120 kg Gkjdpfxsb Irfce Ak Uob The swiveling frame can be mounted on the base frame of the HS 300 midi with a few simple steps. Even large boards can be rotated by this quipment from one person with no effort from the vertical to the horizontal position. Size of swiveling frame 1800 x 1480 mm Further optional available Accessories : * work plate beech tree Multiplex, 30 mm thick * wooden breadboard made of beech tree Multiplex, 30 mm thick

Condition: good (used), You are bidding on: a branded machine set – a folding machine from a renowned and well-known manufacturer – Schechtl HA and a guillotine shear RAS by Reinhard Maschinenbau Sindelfingen. Machine details: Folding machine: - Die rail bends cleanly – test possible on site - Angle display - Bending length slightly over 2.5m - Sheet metal capacity: 1.5 mm for steel – also suitable for aluminium, zinc, etc. - Standard die rail - Foot-operated closure - Current new price approx. €20,000 net Guillotine shear RAS: - Electrically operated guillotine shear up to 2mm steel – also suitable for aluminium, etc. - Cutting length: 2.5m - Extension table for special applications included in the price – can be mounted on the left side - Optional spare blades available - Adjustable depth gauge from the front - Many additional onsite tools and auxiliaries available as options - Machines can also be purchased individually Important: Optionally, you will also find a wide range of machines and equipment for sheet metal and steel processing on offer in our shop, including various rails, depth gauges – everything relating to bending and shearing, such as press brakes, guillotine shears, drilling machines, slip rolls, slitting and profiling machines, accessories (beading devices, round rollers for gutter fabrication, back gauges, etc.), as well as hand tools and spare parts from many top manufacturers in stock. Please feel free to contact me for any questions. You will receive an invoice in accordance with § 25a UstG, VAT is included in the invoice amount (margin taxation system). Free loading available – approx. weight: bending machine about 1900 kg, shear about 1600 kg. Inspection and testing are possible and encouraged by prior phone appointment. Gksdpfxjyqytqj Ak Ujb Payment in cash upon collection. Benefit from our experience and expertise – we are happy to advise you. Collection by the buyer (or a shipping company commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 motorways. Article number: Folding machine RAS 251009

Condition: good (used), Rolling width: 2050mm Rolling thickness 3x toproll Ø:18mm Rolling thickness 5x toproll Ø:21mm Rolling thickness prebending: 12mm Top Roll Ø: 280mm Side roll Ø: 260mm Number of rolls: 3 Rolling speed: 0-5 Adjustiment lower roll: 0-150mm/min. Adjustment side rolls: 0-150mm/min. Top support: yes Power: 12kW Length: 3000mm Width: 1500mm Gkodswtpgtepfx Ak Usb Height: 1600mm Weight: 5200kg

Condition: used, 1 Pair of Transport Dollies, Platform Trolleys, Transport Carts GORR 1 pair = 2 transport dollies, each equipped with 4 swivel castors Load capacity per dolly: 1000 kg Platform size per dolly: 1050 x 255 mm Material thickness of support plate/platform: 4 mm Overall height: 145 mm Wheel diameter: 100 mm Wheel width: 37 mm Load capacity per fixed castor: 300 kg - Each dolly has 4 swiveling fixed castors with white polyamide wheels, bolted to the support plate - Each dolly is equipped with two fixed castors with brakes - Steel support plate as the platform surface with reinforced side edge Dimensions L x W x H: 1050 x 265 x 145 mm Net weight per dolly: 17 kg Net weight (pair): 34 kg Used, in good condition Pricing per pair = 2-piece heavy-duty dollies Included in delivery are 2 of these universally and flexibly applicable heavy-duty transport dollies. Currently 50 pairs in stock. Both dollies together offer 8 swivel castors and a combined load capacity of up to 2 tonnes. Our customers use them to transport squared timber, boards, planks, and sawn lumber. Others use them for moving angle steel, beams, and heavy pipes in the workshop. Also suitable for transporting electrical cabinets, control cabinets, heavy tables, and furniture. Godpexcixlefx Ak Uekb Ideal as machinery skates, material dollies, or machine moving gear.

Condition: new, Year of construction: 2025, Schnittbereich quadratisch (B x H): 2600 x 100 mm Kürzeste Länge des abgeschnittenen Stücks : 1100 x 20 mm Kürzeste Reststücklänge im automatischen Betrieb*: 400 mm Kürzeste Reststücklänge im Einzelschnitt: 40 mm Electrical connected load: 41 kW Leistung des Sägemotors: 30 kW Leistung hydraulischer Motor: 7,5 kW Schnittgeschwindigkeit stufenlos regelbar: 20-100 rpm Saw feed speed: 1-700 mm / min Höhe der Materialauflage: 720 mm Sägeblattdurchmesser: 425 mm Sägeblattbohrung: 50 mm Sägeblattdicke: 2,7 mm Length: 12000 mm Breite inkl. Späneförderer : 6300 mm Gsdpjxlcausfx Ak Uskb Height: 3000 mm Weight of machine approx.: 28000 kg Standard configuration Variable blade speed controlled by inverterPrecision feed pressure & feed rate dual valve systemServo feeding motor with precision ball screwCombined guides with bearingsOil mist cooling de anti-vibration deviceP.L.C. control for all electric and hydraulic raulic pump with three-phase motorTwo sets of horizontal and vertical clamping devicesAdjustment baseRoller table

Condition: new, Year of construction: 2021, total length: 2,770 mm, Tugger Club Car Precedent Gkodpfjxpx Szex Ak Ueb Drive Electric Year built 2021

Condition: new, Year of construction: 2020, total length: 2,100 mm, Tugger Club Car Tempo Drive Electric Year built 2020 Gksdpfx Aexpx Uiok Ujb

Condition: new, Year of construction: 2022, total length: 2,800 mm, Tugger Club Car Club Car Drive Electric Year built 2022 Gjdpsxpx Trofx Ak Ujkb

Condition: used, Steel floor plates Length: 2210 mm Width: 1500 mm Thickness: 260 mm Gedszwxcvjpfx Ak Uekb With T-slots in both directions Weight: approx 2 T 3 same plates available.

Condition: new, Year of construction: 2020, total length: 2,770 mm, Tugger Gkedpfxjxpx N To Ak Uob Club Car Tempo Drive Electric Year built 2020

Condition: used, Year of construction: 2020, total length: 2,100 mm, Tugger Club Car Tempo Drive Electric Gkedjxpx Txopfx Ak Ueb Year built 2020

Condition: new, Year of construction: 2026, functionality: fully functional, Our honeycomb heater plates are manufactured and assembled to Clako’s own unique design. 1 Zone, 2 Zone + 4 Zone Heater Plates are manufactured by our own engineer to fit your Cylinder, Platen, Saroglia and Clamshell machines. Strong, durable & available in high grade hardened steel or lightweight toughened aluminium to suits your needs. All of our honeycomb plates are machined to true flatness. Dies (cliches) secure to our plates using low height toggles. Godpfxjyznu So Ak Uekb Contact our team for details and price.

Condition: excellent (used), 3-Roll Plate Bending Machine / Round Bending Machine Manufacturer: Nosstec, Sweden Type: 8266 15/40 Year of manufacture: 1998 Serial number: 3058 Working width: 1,540 mm Plate thickness: up to approx. 4 mm Rollers: 3 pieces, steel rollers Drive: motorized Operation: electric control with foot switch and mechanical hand adjustment Weight: approx. 840 kg Documentation included Gjdpfx Asz Agn Dek Uokb Very good condition, fully functional.

Condition: new, Compact hydraulic guillotine shears, ideal for metal and container construction. The generous support arms and the table with integrated rollers make the alignment and processing of large workpieces precise and easy. Operation is via a foot pedal, leaving your hands free to align the workpiece. Technical data: Cutting length: 1320 mm Sheet thickness: 3.5 mm Strokes / min: 35 - 47 Number of hold-down devices: 9 Downholder pressure: 2.5 t Front support arms: 1000 mm Back gauge: 600 mm Cutting angle: 1/2 - 2° Motor power: 5.5 kW Equipment: - High-quality, high-alloy shear blades with a high chrome content - Upper blade with 2 cutting edges, lower blade with 4 cutting edges - Hydraulic cutting angle adjustment - Manual cutting gap adjustment (from 4.5 mm) - Generous support arms with adjustable stop Gkodpfetvnczsx Ak Uob - Lateral stop with double scale - Feed worktable with ball rollers - Full-length front intervention guard - Hydraulic, independent hold-down device - Manual back gauge 600 mm - Overload-protected hydraulic system - Safety foot switch Options: - Hydraulic sheet holding device - Increased motor power for more strokes / min - Back gauge with lifting function - Extended support arm (1500 / 2000 / 3000 mm) - Extended front side stop (1500 / 2000 / 3000 mm) - Angle stop with scale - NC back gauge 800 mm with M15S control unit - CE conformity

Condition: used, Dimensions (D x W x H): 100 x 2000 x 800 mm Gkedpfxow Ng U Se Ak Ueb With base frame

Condition: used, Year of construction: 2009, CNC-controlled round bending machine Schröder-Fasti Type 114 Year of manufacture: 2009 Condition: Used, like new Exhibition machine Operating hours: < 50 hours Technical data 10/1.0 10/1.5 Useful length (mm) 1080 1080 Sheet thickness (400 N/mm²) 1.0 1.5 Roller diameter (mm) 68 80 Motor power (kW) 8.2 8.2 Weight (kg) 1780 Standard equipment: - CR80 control system on a rotatable panel, frequency-controlled rear roller positioning Gkodpfx Akoy Twfqe Ujb - Rollers, approx. 700 N/mm² tensile strength - Three-roller drive - Hydraulic adjustment of the bending rollers - Hydraulic adjustment of the lower rollers - Automatic opening of the upper roller bearing - Foot switch - Electrical safety control Optional equipment: - Rollers hardened and ground, roller diameter 68/80 mm - Tube ejector - Hydraulic tube support for large tubes

Condition: used, Year of construction: 2008, Product Information "Nosstec Round Bending Machine" 4-Roll Round Bending Machine with crowning Type / Model Nossebro Luna 8268 30/20 Condition Used Year of Manufacture 2008 Technical Data Maximum working length 3,040 mm Max. sheet thickness (400N/7mm2)(t) 2.0 mm Number of rolls 4-roll system (arranged asymmetrically/symmetrically) Driven rolls All 4 rolls individually driven Roll diameter (top roll) 140 mm Motor power 2.2 kW Power connection 400 V / 3-phase Control voltage 24 V Equipment: CNC control Mylock 100 Features - CNC control with the capacity to store 200 programs in internal memory and virtually unlimited programs by attaching an external USB flash drive - Pre-bending and final bending in one cycle - The pre-bending value is approximately 70% of the specified material. - All four rolls are driven - Crowned rolls - Programmable axis - Designed for highest accuracy - Adjustable crowning of the lower roll Gkedpezp Ip Ajfx Ak Ujb - Program backup via external computer or connected USB stick Inquiry item: Transport costs in an individual offer.

Condition: good (used), Table size: 2000 x 1000 x 120 Dimensions: 2100 x 1080 x 860 Weight: approx. 1.9 t T-slot: 14 mm, 3x Godpfxozi R E Ts Ak Uekb T-slot spacing: 350 mm center to center

Condition: used, Straightening and welding plate, steel and grey cast iron, heavily ribbed Gkjdpeqylk Ujfx Ak Ueb Heavy-duty straightening plate Length: 2000 mm Width: 1500 mm Thickness: 125 mm Plate thickness: approx. 40 mm throughout Table height: 880 mm - Table substructure made of steel (custom-made) Weight: 1700 kg Good condition

Condition: used, Universal swivel-tilt-rotary table DECKEL type FVW, suitable for FP 2 or FP 3 (Deckel no. 62473). Table size: 700 x 240 mm. Swivel range: +/- 30° in all directions. Weight: approx. 90 kg. Gsdpexcilrefx Ak Uokb

Condition: used, Circular shears with motor drive FASTI Type 502 - 10 - 2 Machine no. No. 9252 009 Year of construction 1992 Material thickness max. 2 mm (400N/mm²) Maximum circular blank diameter 1000 mm Minimum blank diameter 100 mm Cutting shaft speed 60 and 120 rpm Cutting speed 12 and 24 m/min. Blade holder Ø 20 mm Knife diameter Ø 65 mm Projection of the clamping plate 720 mm Projection of the cutting wheel 280 mm Motor power 1.1 / 1.4 kW Mains connection 380 Volt, 50 Hz - 2 motor speeds - Mechanical clamping tip - Scale on the clamping bracket - electric foot switch - 1 set of cutting blades - Operating instructions with electrical diagram in PDF format Space requirement L x W x H 1600 x 660 x 1350 mm weight 320 kg good condition Gksdpfx Akou Rimmj Uob

Condition: good (used), Clamping plate with grooves, marking plate, measuring plate, measuring table, straightening plate, marking plate Gjdpfx Aondzycok Uekb -Clamping surface: 2995 x 2500 mm -Clamping plate: with grooves, no T-slots -Height: 300 mm -Groove width: 10 mm -Groove spacing: 200 mm -Transport dimensions: 3100/2500/H300 mm -Weight: 5000 kg