Bolster plate

EROWA Uniplatte C

Condition: used, Year of construction: 2023, Lathes Travel distance X: 495 mm Travel distance Y :125 mm Travel distance Z: 1560 mm turning length: 1540 mm max. turning diameter: 660 mm max. circulation diameter: 660 mm spindle boring: 65 mm range of revolutions till: 5000 rpm powered tools B-axis: ±120° Tool spindle speed: 12,000 rpm Tool magazine: 38 tools Machine weight: 18,800 kg Hnodpfx Agoy Nxc Ajmon Condition: rarely used, like new

Condition: ready for operation (used), Year of construction: 2017, operating hours: 15,208 h, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, overall weight: 12,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 21,000 W, number of axes: 4, This 4-axis DMG MORI NHX 5000 was manufactured in 2017. It features a maximum spindle speed of 15,000 rpm and a travel of 730 mm in both the X and Y axes, with a Z-axis travel of 880 mm. The machine includes a robust pallet size of 500 x 500 mm and a tool capacity of 40 tools. If you are looking to get high-quality machining capabilities, consider the DMG MORI NHX 5000 horizontal machining centre we have for sale. Contact us for further details. • Spindle torque: 111 Nm (continuous 85 Nm) • Tool capacity: 40 tools (optional magazine 60 tools) • Rapid traverse (X/Y/Z): 60 m/min • Acceleration (X/Y/Z): 1G • Pallet size: 500 x 500 mm • Number of pallets: 2 • Automatic rotary pallet changer: 2 stations • NC table B axis: direct drive, indexing 0.001°, max speed 100 rpm • Maximum pallet load: standard 500 kg (optional 700 kg) • Direct position measuring system; Linear scale standard • Control system: CELOS Siemens 840D sl with 21.5" ERGOline multi-touch display • Electronic handwheel: Siemens • Coolant through spindle preparation up to 70 bar • Renishaw probe OMP60 • Tool breakage detection system • Machine status signal lamp • Water-glycol spindle cooling unit • Application Tuning Cycle (ATC) • Machine bed: 3-point support • Power connection: L1 L2 L3 N PE • Connected load: 46 kVA Hnjdpoyt Hwzjfx Agmen • Maximum input current: 67 A • Fuse protection: 125 A • Short circuit current: 1.25 kA • Maximum supply voltage: 4.0 kV • Supply voltage: 400 V ±10 % • Frequency: 50 Hz • Control voltage: AC 230 V / DC 24 V • Operating time: 27,715 h • Spindle hours: 15,208 h Additional equipment • Knoll KF110/700 • Knoll Flow Monitor • High-pressure coolant system • 2x clamping towers (250 x 250 x 650 mm) TRIAG incl. accessories • 95x tool holders HSK63 (various clamping devices) Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2009, operating hours: 35,295 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 3,200 mm, total width: 5,400 mm, table width: 900 mm, table length: 700 mm, table load: 1,400 kg, overall weight: 13,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 28,000 W, number of slots in tool magazine: 60, product length (max.): 3,400 mm, swivel angle B-axis (min.): -29 °, swivel angle B-axis (max.): 180 °, swivel angle C-axis (max.): 360 °, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 80P duoBLOCK was manufactured in 2009. It features impressive axis travels with X-axis at 800 mm, Y-axis at 1050 mm, and Z-axis at 850 mm. The machine includes a robust table size of Ø 900 × 700 mm and a maximum workpiece weight capacity of 1800 kg. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 80P duoBLOCK vertical machining centre we have for sale. Contact us for further details. • Rotary axes: B-axis (tilting head) -30° to +180°; C-axis (rotary table) 360° continuous • Table size: approx. Ø 900 × 700 mm Hodpeyvhfmofx Agmonn • Max. workpiece weight: approx. 1400–1800 kg • Spindle type: Vertical milling spindle • Coolant through spindle (CTS): yes • CE compliant • P-B0052 – 3D control Heidenhain iTNC 530 • P-W0276 – Universal milling head with controlled B-axis • P-D0010 – Tool magazine Horizontal chain magazine with 60 positions • P-K0220 – Infrared measuring probe Renishaw OMP 60 (optical) • 3D quickSET – Tool set for checking and correcting kinematic accuracy • P-K0205 – 4-color signal light • P-G0004 – Wash gun with pump 2 bar / 40 l/min (theoretical pump capacity) • P-L0036 – Power failure safety package • Condition: Very good working condition; full service history available Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, controller manufacturer: Heidenhain, controller model: TNC640, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 26,500 h, coolant supply: 40 bar, spindle nose: SK40, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The machine is in good condition and can be inspected while powered on. Hedpfxozcuwne Agmjnn

Condition: as good as new (ex-display), Year of construction: 2017, operating hours: 2,038 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, workpiece height (max.): 630 mm, workpiece weight (max.): 600 kg, Very low hour meter reading – approx. 2,038 h. Hjdpfx Agey Udi Ejmsnn FANUC system. The machine was originally purchased for demonstration purposes at a training center and was subsequently used occasionally by a tool shop. The machine is in excellent condition and fully operational – testing under power is possible.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 6,361 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: 840D ShopMill, workpiece length (max.): 900 mm, workpiece width (max.): 560 mm, workpiece height (max.): 630 mm, workpiece weight (max.): 600 kg, total height: 3,000 mm, total length: 4,000 mm, total width: 5,000 mm, table width: 900 mm, table length: 560 mm, table load: 600 kg, overall weight: 5,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 6,361 h, spindle nose: SK40 (DIN69871), number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We have acquired this Japanese DMG MORI ecoMill 600V directly from production and it is in very good condition. The CMX 600V (ecoMill 600V) features a C-frame design (classic configuration) and a movable table (X-axis), which makes it suitable for general/all-round milling tasks. Additional options & accessories: Hedpfx Ajy Dg Eujgmenn - Siemens 840D SlimLine including 3D simulation. - PROGRESSLine (indicates the remaining production time and quantity for a complete machining process). - Chip conveyor - Rinsing gun - Preparation for internal cooling - Original documentation

Condition: like new (used), Year of construction: 2015, operating hours: 26,915 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, nominal power (apparent): 30 kVA, controller manufacturer: M-730UM, workpiece weight (max.): 1,000 kg, total height: 2,800 mm, total length: 3,300 mm, total width: 3,000 mm, table width: 600 mm, table length: 1,100 mm, spindle speed (min.): 8,000 rpm, Year of construction: 2015 CNC controller: M-730UM Axes X-axis travel mm: 800 Y-axis travel mm: 530 Z-axis travel mm: 510 Distance spindle nose - table surface mm: 150-660 Feed rates m/min: 5 Rapid traverse m/min: 30 Worktable Number of pallets: 1 Table dimensions mm: 1100x600 Max. workpiece weight kg: 1000 Spindle Spindle speed rpm: 8000 Spindle drive power kW: 30/22 (25%ED/cont) Spindle torque Nm: 304 Tool system Tool holder: MAS-BT 50 Tool magazine slots: 30 With free neighboring places mm: 240 With occupied neighboring places mm: 120 Max. Tool Length mm: 350 Max tool weight kg: 20 Hnodpfxjxwxc As Agmjn Tool-to-tool time s: 2.34 Equipment Chip conveyor Internal cooling lubricant supply 4th axis DDRT-260X Custom Macro common variables (200) Machine running times Under power: 35896 Spindle Working: 26915 Rated power kVA: 52 Basic machine dimensions / weight Length mm: 3300 Width mm: 3000 Height mm: 2800 Weight kg: 6870

Condition: used, Year of construction: 2010, x-travel 800 mm y-travel 1.050 mm z-travel 800 mm control 840D solutionline Siemens Speed Mainspindle max. 10.000 min/-1 power capacity - main spindel 44 kW max. Torque 288 Nm tool taper HSK-A 100 DIN 69893 Swivel range -10° / +180 ° table surface area dia. 900 x 700 mm max. table load 1.500 kg distance spindlenose - table horizontal 50 - 850 mm distance spindlenose - table vertical 150 - 950 mm table speed 35 min/-1 rotatable C: 360 ° number of toolpositions 120 pos. tool taper HSK-A 100 max. tool diameter 110 mm max. tool-dia with free toolbox 230 mm max. tool length 550 mm max. tool weight 30 kg tool changing time 5,4 sec rapid traverse ( X / Y / Z ) 60 m/min Rapid B-Axis 23 min/-1 Accelaration 7 / 6,5 / 6,5 m/s² Feed force ( X / Y / Z ) 13 / 13 / 9 kN weight of the machine ca. 13,0 t dimensions of the machine ca. 6,0 x 5,5 x 3,7 m total power requirement 80 kVA 5 Axis Machining Center - Universal DMG DECKEL MAHO - DMU 80 P duoBLOCK - controled Swivel-Milling-Head / Gear-Spindle (B-Axis) - NC-Rotary Table (C-Axis) - Tool identification - 3D machining, 3D tool compensation Hedpfezc Rqwex Agmonn - TRANSMIT cylindrical surface transformation (milling of cylindrical paths) - CompCad compressor function for high-speed machining - WITHOUT tools

Condition: used, Year of construction: 2012, Milling machines Travel distance X: 700 mm Travel distance Y :420 mm Travel distance Z: 380 mm Hedpfx Aoy Nxc Nogmenn HSC-machines Number of axis: 3 milling machine / machining center spindle revolutions: 24000 rpm Speed range to: 24000 U/min tool changer: 38 - time input Power : 20 kW Integrated 4th axis (TSUDAKOMA)

Condition: repair required (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 465 mm, workpiece weight (max.): 500 kg, table load: 500 kg, rotary table diameter: 650 mm, spindle speed (max.): 20,000 rpm, CNC Heidenain 620 WORK AREA: Longitudinal X: 630 mm Transversal Y: 530 mm Vertical Z: 465 mm SPINDLE: Tool attachment cone: HSK 63 Speed: 20.000 rpm Power: 28 kW Torque: Nm 100 TOOL CHANGER: Tool magazine: 32 places Maximum tool diameter/with free adjacent positions: 76 / 130 mm Maximum tool weight: 7 kg Maximum tool length: 300 mm CN ROTARY TABLE WITH CN SWIVEL AXIS: Table diameter: 650 mm Permitted load: 500 kg B axis: -5° (-90°) /+110° DIMENSIONS AND WEIGHTS: Weight: 8.000 kg Dimensions: mm2.735x2.420x2.820h 5 PALLET PALLET CHANGE SYSTEM: - Base frame as electro-welded rigid - Security carter with all the security elements on the island - 5 pallet racks - Movement system for loading and unloading pallets Hjdozblf Hjpfx Agmonn - Pneumatics, electrical and control system of the island Storage of 5 pallets measuring 400 x 400, fixing the pallets on the pallet racks, total weight between pallet and piece 100 kg. Machine complete with: • Optical lines in X/Y/Z • Chip conveyor • 70bar TW high pressure refrigerant, external tank with paper filter • TNC software option "continuous 5-axis interpolation and 3D machining" • Piece feeler for machining centres, Blum TC 52 system • WIRELESS infrared probe for the mechanical probing of tools • Instruction manuals and CE declaration