Used Turn Plate for sale (19,955)

Year of construction: 2021, condition: used, Load capacity: 2000kg, support surface per table X/Y: 1400mm/900mm, tilting angle: 100°, travel of the movable table: approx. 300mm, drive: hydraulic, control: PLC, operating modes: manual/automatic, collision avoidance in manual operation via table position and table inclination. Equipment: heavy-duty rollers, therefore movable. Machine dimensions X/Y/Z: approx. 2600mm/1800mm/1300mm, weight: 1310kg. Documentation available. Inspection possible by arrangement. Bsdpfx Aozu Sztokneww

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: PW2000-003, workpiece weight (max.): 2,000 kg, overall weight: 1,310 kg, table length: 1,400 mm, table width: 900 mm, The machine is in like-new condition! TECHNICAL DETAILS Maximum load capacity: 2,000 kg Tables and support surfaces Number of tables: 2 Support surface per table: 1,400 x 900 mm Swiveling movement Swiveling angle of the tables: 100° Angle of the load-bearing steel profiles: 90° Table travel distances: approx. 300 mm MACHINE DETAILS Bodpezd A Rdefx Akneww Dimensions & Weight Dimensions (L x W x H): approx. 2,600 x 1,800 x 1,300 mm Machine weight: 1,310 kg Machine operating principle: The turning device consists of two opposing tables, each with a support surface of 1400 x 900 mm. On the side of the table that is facing downwards during swiveling, the load-bearing steel profiles are angled upwards by 90° in order to securely hold the plate to be turned even in a vertical position during the 90° swiveling process. Both tables are arranged opposite each other and are swivelled by 100° using hydraulic cylinders. The tables are mounted on a load-bearing substructure, on which one table is fixed and the other is movable relative to it. The movement is carried out by hydraulic cylinders, which can move the table, which is mounted on rollers, by approximately 300 mm. The substructure also supports the hydraulic and electrical components. A hydraulic unit serves as the drive source, supplying the cylinders with oil according to the control commands. The corresponding valves are electrically and/or hydraulically controlled and initiate and maintain the movements of the tables required for their interaction until the turning process is completed. Particular attention is paid to the safety of the movements and the precise adjustment of the table movement in the interaction between pressure and tension when designing the hydraulic system. The geometry of the axes of rotation of the tables results in a change in the load effect on the tilting cylinders. The hydraulics are designed in such a way that the required performance is ensured and an overload of the components is not possible during normal operation. Corresponding filters, combined with a generously sized tank volume, ensure a high availability of the hydraulic system. The necessary electrical control is completely housed in a steel sheet metal enclosure, which contains all the required components. The core of the control is a PLC, in which the operating parameters are processed according to the program specification. In addition, the emergency stop function and all the relays and output units required to control the functions are installed. The turning device is operated via a control panel in which a touch panel is used to input the function parameters, such as swivel table 1 up, swivel table 1 down, move table 1 forward, move table 1 backward, swivel table 2 up, swivel table 2 down, as well as start or stop the automatic mode. In order to avoid a collision of the tables in manual operation, the PLC programming is designed in such a way that this is prevented by the data on the table position and the respective table inclination. After the emergency stop situation has been resolved, the PLC control automatically completes the turning process. The turning device is equipped with heavy-duty rollers and can therefore be moved.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, length of the shorter conveyor table – 1300 mm, width – 1900 mm length of the longer conveyor table – 6050 mm, width – 1630 mm length of the roller table – 1900 mm, width – 1630 mm length of the turning table – 4400 mm, width – 1600 mm Bwjdpfx Aez Szpyoknjw year of manufacture: 2018 maximum speed: 20 m/min

Year of construction: 2021, condition: used, Alfa Laval T10 Plate Heat Exchanger Industrial Alfa Laval gasketed plate heat exchanger, suitable for efficient heat transfer in industrial process applications. The unit consists of a plate pack mounted in a heavy-duty Alfa Laval frame with inlet and outlet connections. Product details: Manufacturer: Alfa Laval Type: T10 Equipment: Gasketed plate heat exchanger Quantity available: 2 units Heavy-duty steel frame Removable plate pack Multiple process connections Industrial configuration Condition: Used industrial surplus Bwjdpfx Akjz Dix Eonsw Both heat exchangers are available individually or together. The units are currently installed and can be inspected prior to purchase. Location: The Netherlands This equipment is industrial surplus and is sold as-is, without warranty or claims. Please contact us for additional information, dimensions, or to make an offer.

Condition: good (used), Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trolleys, tank rollers, machine transport rollers steering gear, tank roller plates, machine transport chassis -Support plate: Turntable for machine transport chassis 3 pieces -Load capacity: t -Plate: Ø 155 mm -Shipping/Price: complete Bjdowxu Adepfx Akneww -Dimensions each: 280/160/H65 mm -Weight: 7.6 kg/piece

Condition: good (used), Cast iron bed - Floor Plate Useful surface (L x W x H): 3600 x 1200 x 300 mm 4 T-slots: width 44 x 26 mm Equipped with Levelling feet Bwjdpfxez I A Ubs Aknjw Weight: approx 3 T

Condition: good (used), Year of construction: 2006, operating hours: 1,716 h, functionality: fully functional, turning length: 1,500 mm, turning diameter: 420 mm, Equipment: documentation/manual, Used Mazak Quick Turn Nexus 350 M machine, standard configuration with a 15" Kitagawa three-jaw chuck and a center distance of 1500 mm, maximum turning diameter of 420 mm. Power on: 4936 hours, operating hours: 1736 hours. No unusual noises detected. Maintained and serviced by Mazak in February 2026. The machine is in excellent condition and comes with a large number of tools. Bode Ahgkpjpfx Akneww

Condition: used, functionality: fully functional, load capacity: 350 kg, Price: Please submit a serious offer. We are offering for sale two robust and complete industrial mezzanines, ideal for optimizing and creating additional space in a warehouse, workshop, or commercial premises. First mezzanine – 4.5 m × 21.5 m – Height 6 m, i.e., 3 m per level * Dimensions: 4.5 m × 21.5 m * Area per level: 96.75 m² * Installation on 2 levels * Total area: 193 m² * 2 staircases included Bodjz Tdilopfx Akneww * 30 mm wooden flooring * Guardrails included * Price: Please submit a serious offer – Delivery possible Second mezzanine – 4.5 m × 17.7 m – Height 6 m, i.e., 3 m per level * Dimensions: 4.5 m × 17.7 m * Area per level: 79.65 m² * Installation on 2 levels * Total area: 159 m² * 2 staircases included * 30 mm wooden flooring * Guardrails included * Price: Please submit a serious offer – Delivery possible This set is particularly suitable for warehouses, storage facilities, workshops, offices, or commercial activities, offering significant potential for creating additional space without extending the building.

Condition: used, Cast iron bed Length: 2300 mm Width: 1900 mm Thickness: 200 mm Height on feet: 980 mm 5 T-slots horizontal and vertical T-slots dimensions: 60 x 35 mm Square dimensions: 365 x 365 mm Bwedpfxjz H Ixcj Aknjw Crack at a longitudinal T (see photo) Weight: approx 3 T

Condition: used, Year of construction: 2020, functionality: fully functional, load capacity per storage section: 500 kg, 2 completely identical mezzanines, same make and model: Mezzanine 1 – 17.55m x 17.88m = 313.79 m2 for €26,600 (excluding VAT) Bwedpfx Ajz Tdhnoknsw Mezzanine 2 – 17.55m x 17.88m = 313.79 m2 for €26,600 (excluding VAT) A 760 m2 mezzanine can be created if needed. Very nice industrial mezzanine from 2020, in excellent condition, completely disassembled, labeled, and palletized for easy and quick reassembly. Main features: Allowable load: 500 kg/m² Floor covering: very high-end grating Height under structure (under the steel frame): 4.50 m Height at floor level (on the steel frame): 5.00 m Column spacing: approximately 4.3 m x 5.8 m Condition and packaging: Entire set in very good condition Disassembly carefully carried out by professionals All elements are numbered Labeling and assembly plans provided Entire set ready for reassembly Stored on pallets

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Bsdoz I A Nrjpfx Akneww Equipped with 12 leveling feet Weight: approx 4,5 T

Condition: used, Year of construction: 1971, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bsdpfxsz S Ng Hs Akneww Working area Sheet metal width: 2,000 mm Sheet metal thickness for St 42: 16 mm Passage width: 2,250 mm Overhang: 600 mm Knife and cutting Knife length: 2,005 mm Cutting gap adjustment: 0.05–0.95 mm Cutting angle: 1° 40′ Clamping beam: 10 pcs. Back gauge Gauge length: 1,000 mm Back gauge adjustment: 10–1,000 mm Work table Table size: 2,500 × 700 mm Table height above floor: 800 mm Hydraulics and Electrics Oil volume: 900 l Operating voltage: 380 V Machine data Machine weight: approx. 10 t Space requirement: approx. 3 × 2.3 × 2.3 m EQUIPMENT Foot switch Supports Spare knife

Condition: used, Cast bed Bedsz Nyc Hspfx Aknoww Length: 2410 mm Width: 1500 mm Thickness: 550 mm 8 T-slots 50 x 27 mm with 2 opening (possibility to close them) 1 opening L 560 x W 500 mm 1 opening L 480 x W 360 mm Weight: approx 5 T

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, turning length: 285 mm, turning diameter: 280 mm, spindle speed (max.): 3,000 rpm, controller manufacturer: Fanuc, TECHNICAL DETAILS Turning diameter: max. 280 mm Turning length: max. 285 mm Swing diameter: 400 mm Bar capacity: 51 mm Spindle bore: 65 mm Main spindle Spindle nose: A2-6 Spindle speed: 90–3,000 rpm Spindle power: 5.5 kW Chuck size: 215 mm / approx. 8" X-axis travel: 162.5 mm Z-axis travel: 320 mm Bsdpfxs Afwvbo Akneww Rapid traverse X: 16 m/min Rapid traverse Z: 24 m/min Tool stations: 10 MACHINE DETAILS Control system: FANUC Coolant tank: 90 l Dimensions & weight Dimensions (L x W x H): approx. 1,645 x 1,453 x 1,625 mm Machine weight: approx. 2,400 kg Connection voltage: 200 V Frequency: 50 Hz Phases: 3 Connection power: 27 kVA

Condition: used, functionality: fully functional, load capacity: 500 kg, 3 completely identical mezzanines, same make and model: Mezzanine 1 – 32.43m x 9.13m = 296.09m2, priced at €25,000 (excluding VAT) Mezzanine 2 – 32.43m x 8.5m = 275.65m2, priced at €23,400 (excluding VAT) Mezzanine 3 – 32.43m x 7.88m = 255.55m2, priced at €21,700 (excluding VAT) Bwodoz Tdh Uspfx Aknjw Completely dismantled, identified, and palletized for easy and quick reassembly. Main features: Admissible load: 500 kg/m² Wooden floor, 30 mm thick, in very good condition Height under structure (under beam): 3.00 m Column spacing: approximately 5.5 m x 4 m Column section: 120 x 120 mm Guardrails: approximately 40 linear meters per mezzanine Approximately 20 neon lights per mezzanine Access stairs, additional cost: €1,200 (excluding VAT) Condition and packaging: Entire set in very good condition Dismantling carried out carefully by professionals All elements are numbered Identification and assembly plans provided Entire set ready for reassembly Stored on pallets

Condition: used, Year of construction: 1992, Technical details: Bjdpfx Akju Icpconsww sheet width: 4050 mm plate thickness: 16 mm distance between columns: 4900 mm control for program: Robosoft SC5 Controller back gauge: 1000 motorisch cutting angle: 0,5° - 3° ° cutting gap adjustment: ja / jes mm down holder: 23 Stück height over floor: 1030 mm Table dimensions: L x B 4000 x 520 mm weight of the machine ca.: 19,2 t dimensions of machine: 5,2 x 2,2 x 2,78 m characteristics: - knife length 4100mm, 4 turns possible - Number of strokes: 5 - 11 strokes/min. - Table: side stop with linear scale, with stop bar 1000mm removable, feed aid via / with ball bearings - front support: LxWxH: 1600 x 1100 x 1000 mm; movable over roller rail, easy handling - backgauge adjustable, motor driven and foldable Operation via control panel with jib lenmgth arm and foot control Equipment: - light grid at backgauge - cut line ilumination Accessories: - 1 set (2 pieces) shearing blades *

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 max sheet width: 1050mm max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Bodpfx Akswk Rlxeneww Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm weight: 240kg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: DW1408, spindle speed (max.): 6,000 rpm, bar passage: 42 mm, controller model: Fanuc 0i-TF, counter spindle speed (max.): 5,000 rpm, TECHNICAL DETAILS Number of axes: 7 Bwedpfxs Ahm Ads Aknow Axis configuration: X1, X2, Y1, Z1, Z2, C1, C2 Number of Y axes: 1 Number of spindles: 2 Main spindle speed: max. 6,000 rpm Counter spindle speed: max. 5,000 rpm Bar capacity: max. 42 mm Number of tool turrets: 2 Speed of driven tools: max. 5,000 rpm MACHINE DETAILS CNC control: Fanuc 0i-TF Type of input current: Three-phase EQUIPMENT 2 tool turrets Main and counter spindle 173E collet chuck on both spindles Y-axis High machine rigidity and precision Documentation/Manual

Condition: used, Year of construction: 2014, controller manufacturer: Siemens, controller model: 840 Dsl - Operate, _____ Description: Year of manuf. : 2014 Control : Siemens 840 Dsl - Operate Turning diam. : 340 mm Turning length : 1185 mm In General: Year of manufacture:2014 Control system:Siemens 840 Dsl - Operate Swivel diameter:540 mm Turning length:1,185 mm Bar capacity:102 mm Main spindle: Bedpfx Ao Ah Adbeknoww Technology:Direct drive spindle Speed:4,000 rpm Power:48 kW Torque:680 Nm Bar capacity:102 mm C-axis:0.001° Chuck:Hainbuch Spanntop 100 Hydraulic clamping:Differential pressure clamping Clamping cylinder:Partially Hollow Clamping Cylinder 848 mm Coolant supply:External (chuck flushing) Sub spindde: Technology:Direct drive spindle Speed:4.000 rpm Power:48 kW Torque:680 Nm C-axis:0.001° Chuck:Hainbuch Spanntop 65 Hydraulic clamping:Differential pressure clamping Clamping cylinder:Hollow Clamping Cylinder Coolant supply:External and internal Tailstock function:Mechatronic control of the sub spindle Tool carrier I (X/Y/Z/B): Technology:Milling spindle on a travelling column Milling spindle speed:12,000 rpm Max. power:22 kW Tool holder:HSK 63 X-axis:450 mm Y-axis:200 mm (+/- 100) Z-axis:1,200 mm B-axis:+/- 110° Position measurement systems:Direct (glass scales) Tool carrier II (X/Y/Z): Technology:Tool turret on cross slide Tool drive:Direct drive Speed:10,000 rpm Power:14 kW Torque:34 Nm X-axis:195 mm Y-axis:80 mm (+/- 40) Z-axis:1,200 mm Tool holder:VDI 40 Number of tool stations:12 Steady rest:SLU2X turret steady rest, 8–101 mm Tool magazin: Technology:Chain magazine Number of stations:120 Tool changer:Double gripper Equipment: Position sensors:Direct in X1/Y1/Z1/X2/Z2/Z3 Chip removal:Chip conveyor Coolant supply:CTS system, 80 barCoolant Coolant Temperature Control Tool monitoring:Easy Tool Monitor Tool Breakage Monitoring:Swivel Wire Touch Probe:Renishaw Part removal:Part gripper, conveyor belt Bar feeder:Interface Software option I:5-axis simultaneous milling Software option II:Off-centre turning and milling Software Option IV:Gear Cutting and Gear Shaping Software option III:Alternating spindle speed Chucks:2x Hainbuch Spanntop :

Condition: new, Year of construction: 2026, functionality: fully functional, turning height: 2,300 mm, workpiece weight (max.): 12,000 kg, turning diameter over cross slide: 2,650 mm, turning diameter: 2,700 mm, faceplate diameter: 2,000 mm, total height: 7,100 mm, total width: 5,500 mm, total length: 8,500 mm, rotary table diameter: 2,000 mm, rotational speed (max.): 250 rpm, rotational speed (min.): 1 rpm, spindle speed (min.): 5 rpm, spindle speed (max.): 2,500 rpm, table load: 12,000 kg, table diameter: 2,000 mm, warranty duration: 24 months, overall weight: 63,000 kg, faceplate torque: 43,000 Nm, repeat accuracy: 0.015 mm, REM SCR 27 1SF — CNC Vertical Turning & Milling/Drilling Center 🔴 MACHINE CURRENTLY UNDER ASSEMBLY — DELIVERY MAX 3 MONTHS 🔴 24-MONTH WARRANTY — LONGEST IN ITS CLASS 🔴 UNBEATABLE PRICE FOR EUROPEAN CNC QUALITY ━━━━━ MACHINE HIGHLIGHTS ━━━━━ ✓ Complete turning + milling + drilling in ONE setup ✓ 12-Station ATC — bi-directional, 30 sec tool change ✓ Live spindle ISO 50 — 5 to 2,500 RPM | 37 kW ✓ C-Axis for full contour milling ✓ FANUC 0i-TF PLUS CNC — global support ✓ Heidenhain absolute measuring system (X: LC 195F) ✓ CE certified, full enclosure 3,300mm height ✓ Heavy-duty Meehanite cast iron structure ━━━━━ TECHNICAL SPECIFICATIONS ━━━━━ • Max Machining Diameter: 2,650 mm | Swing: 2,700 mm • Max Machining Height: 2,300 mm Bedpfx Ajzb Ufveknoww • Table Diameter: 2,000 mm (8 T-slots + 4 clamping jaws) • Max Workpiece Weight: 12,000 kg • Table Speed (turning): 1–250 RPM • Main Motor: 100 kW FANUC servo | Torque: 43,000 Nm • Ram Cross Section: 250×250 mm • X/Z Rapid Feed: 10,000 mm/min | Feed: 0.02–6,000 mm/min • X/Z Thrust Force: 35,000 N • ATC: 12-station disc | Max tool Ø 300mm | L 400mm • Coolant: 2,000 L tank | External 10 bar | Through-spindle 40 bar • Chip Conveyor: SARIGÖL hinged, 500mm wide • Accuracy: ±0.020 mm/m | Repeatability: ±0.015 mm • Electrical: 400V/50Hz | 140 KVA | Fanuc 0i-TF PLUS • Weight: 63,000 kg | 8,500×5,500×7,100 mm ━━━━━ IDEAL APPLICATIONS ━━━━━ Large gear blanks | Ring gears | Wind energy hubs & rings Heavy castings & forgings | Oil & gas flanges Mining equipment components | Aerospace large parts ━━━━━ COMMERCIAL TERMS ━━━━━ Delivery: MAX 3 MONTHS from order Warranty: 24 MONTHS parts + labor Incoterms: EXW Bacău, Romania Payment: 50% advance + 50% before shipment Installation & commissioning: included Manufacturer: REM Bacău, Romania

Condition: used, Year of construction: 1982, machine/vehicle number: 10628, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine type: hydraulic squaring shear Machine weight: approx. 5 t Working area Sheet metal width: 3,000 mm Sheet metal thickness: 4 mm Frame width: 3,300 mm Back gauge: 700 mm Cutting data Stroke rate: 19–50 strokes/min Motor power: 7.5 kW Total power requirement: approx. 10 kW Bedpo Aa A A Ajfx Aknoww Dimensions Space requirement: approx. 3.7 × 1.5 × 1.9 m EQUIPMENT 2 stop blocks Digital display Illuminated cutting gap Additional bar with a length of 2.6 m

Condition: good (used), Year of construction: 2004, functionality: fully functional, overall weight: 2,300 kg, type of input current: three-phase, Citizen L20, year of manufacture: 2004 + FMB 3-26, for sale. Machine type: CNC turning center + magazine loader FMB CITIZEN Type: L5 20-VIII Year of manufacture: 2004 Control: CNC Country of origin: Japan Incoterms: EXW Delivery time: Immediate Description: Text Value Unit CNC turning center Citizen L5 20-VIII with magazine loader FMB 3-26 Collet size F25 (145E) Guide bushing (Neukomm) T223 (22.001) 3-position block with driven tools, can be swiveled by 90° (radially or tangentially) Accessories: Documentation, standard tooling Technical details / Accessories / Additional information: Manufacturer: Turning diameter over bed 20 mm Spindle bore 24 mm Turning length 200 mm Spindle speed 20-10000 rpm C-axis 0.001 ° Parting station 20 mm Turning length 80/600 mm Bwodpfx Ao Ahg Sajknsw Spindle speed 200-8000 rpm C-axis 0.001

Condition: good (used), Year of construction: 2008, For sale: 1 Scherer VDZ 80 DS unit with the following technical specifications: Swing diameter: 120 mm Z-axis (vertical): 265 mm X-axis (horizontal): 280 mm Diameter at the front bearing: 85 mm Diameter at the rear bearing: 75 mm 2 x A4 spindle Drive spindle unit rated power: 16.8 kW Rated torque: 100 Nm Bwodpj Ahqymefx Aknew Speed: 1000 - 7000 rpm Travel speed, Z-axis: max. 30 m/min Travel speed, X-axis: max. 30 m/min Dimensions: 2.44 x 2.3 x 1.42 m (L x H x W) Weight: 9000 kg Complete documentation available. Note! This unit was part of a complete production line. A separate program is available. Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices exclude VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Machine Buying/Selling BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MORE. Do you need a high-quality, yet affordable machine for your production? Or do you want to sell yours? For further information or to contact us, please use the contact form.

Condition: good (used), Year of construction: 2006, Machine used only for plastic. Technical details shown in attached pdf document. Bjdpfxou Ibiho Aknjww Parts shown by hand not come.

Condition: excellent (used), Year of construction: 2011, operating hours: 7,541 h, functionality: fully functional, spindle motor power: 25,000 W, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, type of input current: three-phase, total height: 2,067 mm, total length: 5,671 mm, total width: 2,721 mm, overall weight: 8,000 kg, spindle diameter: 250 mm, Equipment: documentation/manual, Main spindle: 25 kW, 5000 rpm, SMW Autoblock chuck diameter: 250 mm, bar diameter: 65 mm. Counter spindle: ISM52, 20 kW, 6000 rpm, SMW Autoblock chuck diameter: 210 mm. Turning and milling spindle (B-axis): HSK63A, 18000 rpm, external/internal coolant with high-pressure flushing at 20 bar. Direct axis measurement. Tool magazine for 24 tools. Chip conveyor, extraction system with filtration. The delivery includes various HSK63A tool holders. Direct sales to end users only. Bedpfoz Dpm Njx Aknoww W-Technology s.r.o. Polní 8 79201 Bruntál Czech Republic