Used Feeding Device for sale (20,355)

Condition: used, Year of construction: 1986, Technical details: sheet width: 650 mm coil weight: ca. 2 t coil internal diameter: 350 - 570 mm electrics - voltage/frequency: 380/50 V/Hz Credpfx Aeu Icguskcjb total power requirement: ca. 1,5 kW weight of the machine ca.: 2,0 t space requirements approx. LxWxH: 1,8 x 3,0 x 1,9 m Coiler with Feeding Device - Sizes of coiler: W:1,20 x D:1,10 x H:1,60m - Roll distance: 0 - 5,5 mm - Rolls turning rate: min.:4,3 rpm, Max.:43 rpm - Rolls dia.: 100 mm - Feeding min.: 1350 mm/min, max.:13500 mm/min - Sizes of feeder: W: 1,30 x D:0,90 x H:1,90m Machine can be demonstrated under power. i.D. *

Condition: good (used), FERAG JetFeeder Feeder for feeding printed products into an inserting line Codetk S D Ispfx Akcorb

Condition: excellent (used), WSM SZ-250K Feeder The WSM SZ-250K is a feeder from WSM-Automation specifically designed for applications with high cleanliness requirements. The "k" in the model designation stands for "short" and refers to the reduced length of the sorting helix, which minimizes abrasion caused by fill level and vibrations. Function: This feeder combines the advantages of spiral feeders with the need for clean processes. Special Feature: The shortened sorting helix (effective length) is the key innovation for minimizing contamination from abrasion. Application: It is used where high cleanliness during feeding is required to ensure clean screw connections. Feeding unit SZ-250K consisting of: Belt hopper BB-01-B (0.5 l) with level control and dirt barrier Coil conveyor WFL 200 IU (200 mm) with singulator Aluminum chassis with plexiglass enclosure Overall dimensions: H: 740 mm W: 700 mm Cedpfx Aox Elfcskcsrb D: 380 mm Screws: M 2.5 x 6 mm Voltage: 230 volts Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: excellent (used), WSM SZ-250K Feeder The WSM SZ-250K is a feeder from WSM-Automation specifically designed for applications with high cleanliness requirements. The "k" in the model designation stands for "short" and refers to the reduced length of the sorting helix, which minimizes abrasion caused by fill level and vibrations. Function: This feeder combines the advantages of spiral feeders with the need for clean processes. Special Feature: The shortened sorting helix (effective length) is the key innovation for minimizing contamination from abrasion. Application: It is used where high cleanliness during feeding is required to ensure clean screw connections. Feeding unit SZ-250K consisting of: Belt hopper BB-01-B (0.5 l) with level control and dirt barrier Coil conveyor WFL 200 IU (200 mm) with singulator Plexiglas enclosure Overall dimensions: H: 740 mm W: 700 mm D: 380 mm Cedjx Elkfepfx Akcerb Screws: M 2.5 x 6 mm Voltage: 230 volts Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, type of input current: AC, vibrating bowl feeder Vibrating feeder RNA SRC-N 550mm diam vibrating feeder with controller Manufacturer/Typ: RNA SRC-N 250-2R Top bowl diameter: 550 mm Bowl diameter bottom: 250 mm voltage: 230 volts 50Hz protection: ip 44 vibration frequency at 100Hz: 6000 /min vibration controller Bowl diameter bottom: 250 mm Bowl diameter top: 380 mm Inner bowl height: approx. 70 mm overall dimensions: height: 700mm width:600mm weight:80g in good condition! If you need more information. We are here to help! Please contact us using the contact form or give us a call Crodpfswav R Ssx Akcob Your ad has been automatically translated. Translation errors are possible.

Condition: used, Vibratory Bowl Feeder / Sorting Device / Bowl Feeder / Vibratory Feeder SORTIMAT Vibratory bowl, sorting device / screw feeding with vibratory feeder for screw assembly technology Feeding system, feeding unit Manufacturer: SORTIMAT Technology GmbH & Co. Model: SM 200 Year of manufacture: approx. 2000 Top bowl diameter: 270 mm Bottom bowl diameter: 180 mm Internal bowl height: approx. 75 mm Sorting track width: 13 mm Overall height (drive + bowl with sorting track): 250 mm Control voltage: 24 Volt DC (external power supply required) Power connection: 230 Volt, 50 Hz - An external 24 VDC power supply is required for the start/stop signals (the controller does not have an internal 24VDC power unit). Credpfx Aksx N Ik Ascjb - REO controller type Reovib R6 / 439 for adjustable vibration speed Required space Ø x H: 270 x 250 mm Weight: 17 kg In good condition A bowl feeder always consists of two main components: 1) Sorting bowl, in which parts are oriented 2) Drive unit, which creates vibrations in the sorting bowl through mechanical oscillations, thus moving the parts.

Condition: used, Vibratory Bowl Feeder / Sorting Device / Bowl Feeder / Vibratory Feeder RNA Vibratory bowl, sorting device / Screw feeding system with vibratory feeder for screw technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-B200-2L Year of manufacture: approx. 2000 Bowl diameter (top): 200 mm Bowl diameter (bottom): 130 mm Bowl internal height: approx. 25 mm Sorting track width: approx. 3 mm Total height (drive + bowl with sorting track): 225 mm Control voltage: 24 Volt DC (external power supply required) Power connection: 230 Volt, 50 Hz - An external 24 VDC power supply is required for start/stop signals (the controller does not have an internal 24VDC power supply). - REO controller type REOVIB R6 / 439 for adjustable vibration speed - The feeder was used for feeding automotive blade fuses Crjdsxrgvmspfx Akcob - Mounted on base frame made from aluminum profile system Required space Ø x H: 240 x 250 mm Weight: 17 kg Good condition A bowl feeder always consists of two main components: 1) Sorting bowl, in which the parts are aligned 2) Drive unit, which generates vibrations in the sorting bowl via mechanical oscillations and thereby moves the parts.

Condition: used, Vibratory Bowl Feeder / Sorting Device / Bowl Feeder / Vibratory Feeder by RNA Vibratory bowl, sorting device / screw feeding unit with vibratory feeder for screwdriving technology Feeding system, feed unit Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-B200-2R Year of manufacture: approx. 2000 Crodpexw Rdljfx Akcob Bowl diameter (top): 200 mm Bowl diameter (bottom): 130 mm Bowl internal height: approx. 25 mm Sorting track width: approx. 3 mm Total height (drive + bowl with sorting track): 225 mm Control voltage: 24 Volt DC (external power supply required) Mains connection: 230 Volt, 50 Hz - An external 24 VDC power supply is required for start/stop signals (the controller does not have an internal 24 VDC power supply). - Control unit REO type Reovib R6 / 439 for adjustable vibration speed - The feeder was used for supplying automotive blade fuses - Mounted on an aluminum profile stand Space requirement Ø x H: 240 x 250 mm Weight: 17 kg Good condition A bowl feeder always consists of two essential components. 1) Sorting bowl, in which the parts are oriented 2) Drive unit, which generates vibrations in the sorting bowl via mechanical oscillations, thereby moving the parts.

Condition: used, Vibratory Bowl Feeder / Sorting Device / Spiral Feeder / Vibratory Feeder RNA Vibrating bowl, Sorting device / Screw feeding with vibratory feeder for screw technology Feeding system, Feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Crjdpfx Aoxf Urpskcob Model: SRC-B200-2L Year of manufacture: approx. 2000 Upper bowl diameter: 250 mm Lower bowl diameter: 190 mm Bowl internal height: approx. 35 mm Sorting track width: approx. 3 mm Total height (drive + bowl with sorting track): 240 mm Power supply: 230 Volt, 50 Hz. - RNA control unit, model ESG 90, for adjustable vibration speed - The feeder was used for supplying automotive blade fuses Required space Ø x H: 250 x 240 mm Weight: 13.5 kg Good condition A vibratory bowl feeder always consists of two essential components: 1) Sorting bowl, where the parts are oriented 2) Drive unit, which generates vibrations via mechanical oscillations in the sorting bowl and thus sets the parts in motion.

Condition: used, Vibratory Bowl Feeder / Sorting Unit / Spiral Feeder / Vibratory Conveyor RNA Vibratory bowl, sorting device / screw feeding unit with vibratory feeder for screwdriving applications Feeding system, feeding device Cjdpfx Akoux Shvjcorb Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-N 250-2L Serial No.: Year of manufacture: approx. 2000 Bowl diameter (bottom): 300 mm Bowl diameter (top): 350 mm Bowl internal height: approx. 25 mm Sorting track width: approx. 30 mm Total height (drive + bowl with sorting track): 380 mm Oscillation frequency: 100 Hz / 6000 rpm Power supply: 230 V, 50 Hz - RNA control unit, type ESG 90, for adjustable vibration speed - The feeder was used for feeding automotive blade fuses Space requirement Ø x H: 420 x 390 mm Weight: 52 kg In good condition A bowl feeder always consists of two main components. 1) Sorting bowl, which aligns the parts 2) Drive unit, which generates vibrations in the bowl via mechanical oscillation and thereby moves the parts.

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure Cedpfexf Up Ujx Akcjrb - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Vibratory bowl weight: 32 kg WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Condition: used, Linear feeder / Vibratory feeder / Sorting device Vibratory linear feeder, vibratory hopper, dosing hopper, storage hopper Vibratory bowl feeder, bowl feeder Vibratory bowl, screw feeding system with vibratory feeder for screwdriving technology Feeding system, feed unit Manufacturer: RNA Rhein-Nadel Automation GmbH Year of manufacture: approx. 2000 Useful load: approx. 1.5 kg Oscillation frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W = 170 x 60 x 12 mm - Mounted track length 340 mm - Overall height with base plate and oscillating plate approx. 115 mm Required space L x W x H: 400 x 280 x 400 mm Weight: 9 kg Crsdoxf Urvjpfx Akceb Good condition

Condition: used, Vibratory bowl feeder / Sorting device / Bowl feeder / Vibratory feeder RNA Vibration bowl, sorting device / Screw feeding with vibratory feeder for screw technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial No.: Year of manufacture: approx. 2000 Bowl diameter bottom: 250 mm Bowl diameter top: 380 mm Bowl internal height: approx. 70 mm Sorting track width: 30 mm Total height (drive + bowl with sorting track): 390 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz Crodpfx Akeuqrahocob - RNA control unit, type ESG 90 for adjustable vibration speed - Vibration bowl with rubber lining - The feeder was used for feeding automotive blade fuses Space requirement Ø x H: 420 x 390 mm Weight: 50 kg Good condition A bowl feeder always consists of two essential components: 1) Sorting bowl, where the parts are oriented 2) Drive unit, which generates mechanical vibrations in the sorting bowl to move the parts.

Condition: used, Vibratory bowl feeder / sorting device / bowl feeder / vibratory feeder RNA Vibratory bowl feeder, sorting device / screw feeder with vibratory feeder for screwdriving technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Type SRC-B200-2R Year of manufacture: approx. 2000 Pot diameter top: 300 mm Bowl diameter bottom: 180 mm Inner height of bowl: approx. 45 mm Sorting track width: approx. 5 mm Total height (drive + bowl with sorting track): 260 mm Mains connection: 230 Volt, 50 Hz. - Control unit RNA, type ESG 90 for adjustable vibration speed - The conveyor was used to feed automotive fuses Space requirement Ø x H: 300 x 260 mm Weight: 14 kg good condition Codpfju Ailgjx Akcsrb A bowl feeder always consists of two main components. 1) Sorting bowl, in which the parts are aligned 2) Drive, which generates vibrations in the sorting bowl through mechanical oscillations and thus sets the parts in motion.

Condition: good (used), Image processing control unit, camera control -Manufacturer: Vision Device, camera controller for 2 cameras -Type: unfortunately no further type designation Crjdpsxvp S Esfx Akcob -Individual components/connectors: see photos -Dimensions: 200/145/H110 mm -Weight: 1.4 kg

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 4004/1135, conveyor belt thickness: 3 mm, conveyor belt width: 600 mm, power: 5 kW (6.80 HP), The payment deadline for the machine is 18.05.2026! Submission of a bid requires timely collection by 22.05.2026! TECHNICAL DETAILS Band width: 100 - 600 mm Band thickness: 0.5 - 3 mm Max. load: 11 t MACHINE DETAILS Voltage: 24 / 380 V Frequency: 50 Hz Power: 5 kW EQUIPMENT Decoiler Integrated feed unit Crodpfxey Nkaaj Akcob

Condition: excellent (used), Knife edge honing device REFORM Cedpfsyidtpjx Akcsrb

Condition: used, machine/vehicle number: 005934, Max. panel width: 2200 mm Max. panel length: 4200 mm Max. panel stack height from the ground: 1000 mm Lifting capacity: 200 Kg Credey Nkw Sepfx Akcjb Movement system: suction cups.

Condition: used, machine/vehicle number: 008411, Max. panel width: 1200 mm Max. panel length: 2700 mm Crjdpfeyngy Eox Akcjb Rotation system: double cone Rotation direction: from long to transverse

Condition: good (used), Year of construction: 1994, functionality: fully functional, Forward/reverse operation, 3–1,000 rpm, brake motor with Haffner 3-roller feed, 8 speeds, good condition. Transport available at additional cost! Cedeybv A Aspfx Akcorb

Condition: used, Price: On request Feed through press Wemhoner VOF2-400-2 Serial number 13350686 Maximum press dimensions 1500x4400mm Maximum stroke 150mm Press pressure 400T 7.5kW, 380V 10 cylinders diameter 120mm Solid plates aluminum 90mm Top and heated, oil boiler included. With infeed and outfeed conveyor. Transport dimensions: Full normal trailer 13000x2400x2400mm, total weight 25,000kg. - Documentation available: No - CE certificate present: No Cjdpfx Akswng S Ajcjrb - Serial number: 13350686 - Max. workpiece length [mm]: 4400 - Max. workpiece width [mm]: 1500 - Number of cylinders [pcs]: 10 - Total working pressure [ton]: 400 - Heating boiler present: Yes - Heating type: Oil heated Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2026, condition: new, NEW, Year of manufacture 2026 Automatic loading and unloading station. Suitable for wood, MDF, solid wood, plasterboard panels, cement fiber boards, panel materials. Examples: doors, boards, MDF panels, fronts, plasterboard, facade panels. Adaptations for other products possible. The machine operates at a constant speed and with set loading and unloading capacity. This allows you to easily automate your feeding and destacking processes and increase process reliability. The system is equipped with a dual-circuit vacuum system. Siemens control panel Technical specifications: - Working width: 1,300 mm - Incl. conveyor belt, length 3,400 mm - Working height: 930 +/- 20 mm - PLC control, operation via touch panel, Siemens S7-1200 - Dual-circuit vacuum system - Loading and unloading of parts via vacuum suction cups - Special suction cups with position adjustment - 4 additional suction cups to lift panels 15 mm (one-sided) before vertical movement - Automatic signal after completion of loading process - Max. horizontal speed: 0.5 m/s - Horizontal stroke: 1,300 mm - Max. vertical speed: 0.5 m/s - Stack height: approx. 1,000 mm (including pallet under panel stack) - Loading side on the left in direction of travel - Vertical lifting stroke: approx. 1,200 mm - Max. lifting weight: approx. 100 kg, continuous operation 85 kg - Max. component width: 1,300 mm - Max. component length: approx. 3,050 mm - Max. conveyor belt speed: stepless up to max. 10 m/min - Electric motor power: 1.5 kW - Electronic components: Schneider Electric and Siemens - Weight: 1,500 kg Credpfx Aksy Iv N Recsb

Condition: excellent (used), For sale: Professional setting device for internal micrometers SUBITO – Schwenk ESU. Very good condition, complete set in original wooden case with manual. • Model: SUBITO Einstellgerät ESU • Manufacturer: Oskar Schwenk GmbH, Germany • Complete equipment • Stable cast iron base • Precise adjustment and micrometric feed • Ideal for setting SUBITO, ESS, ESU internal micrometers • The whole set is in as-new condition Crjdpfxsx A Ia Is Akcob

Condition: excellent (used), Precision CNC tool presetting and measuring device from renowned manufacturer KELCH – model Trabant 271-2/M. Equipped with a length and diameter measuring system featuring optics and a KELCH Pico LCD A23 monitor, as well as Heidenhain ND1202T Tool-Chek electronics. Very good condition, complete and fully operational unit. Technical specifications and features: • Manufacturer: KELCH GmbH + Co. Werkzeugmaschinenfabrik, Germany • Model: Trabant 271-2/M • Year of manufacture: 2000 • Measuring unit: KELCH Pico LCD (Version A23) • Display system: Heidenhain ND1202T Tool-Chek • Power supply: 230V / 50–60Hz / 1000 VA • Optical system with measuring camera and LCD screen • Rotary table with holders and two-axis adjustment system • X/Z axis measuring range: up to approx. 400 mm • Axis control from KELCH control panel (joystick + function keypad) • Digital readout, menu in German and English • Complete with original documentation and all connectors Condition: • Used, fully functional • Very clean example from a German toolmaking shop • All axes move smoothly, screen responds correctly • Ready for work Functional description: The KELCH Trabant 271-2/M is designed for fast and precise presetting of cutting tools prior to mounting in CNC machines. The optical system with Pico LCD display allows for measurement of tool length, diameter, and geometry in visual mode. Ideal for inspection and presetting of milling cutters, turning tools, drills, and special tools. Cjdpfxsxn Ax Ae Akcsrb

Condition: excellent (used), Device for precise setting, measurement, and inspection of CNC cutting tools. Equipped with an EZset optical camera system and EZvision (Image Controller 1) software. Condition: very good, complete, ready for operation. Technical data and features: • Model: PRECIsset 400 • Measurement system manufacturer: EZset GmbH & Co. KG, Germany • Control screen: Image Controller 1 • Software: EZvision • Documentation version: 1.1.1 (18.08.2006) • Measuring range X / Z axes: up to 400 mm • Camera with image processing system • Edge, length, and tool diameter measurement function • Results can be saved and printed • USB and RS ports • Power supply: 12 V DC, 40 VA • Year of manufacture: approx. 2018–2019 • Supplied with original PRECITOOL technical documentation Condition: • Used, fully functional Csdpfjxn Awxox Akcerb • Screen operates correctly • Longitudinal/Transverse axes reference correctly • Well-maintained unit from a German tool shop Functional description: The PRECIsset 400 enables fast and repeatable tool setup prior to CNC machining. The EZset vision system allows for blade geometry analysis and tool wear inspection. High measurement accuracy ensured by a stable column and industrial-grade optics.