CNC lathe + bar feeder
Type: CNC lathes
Model: CONTUR LT-400 MC
Control: Fanuc 0i-TD
Spindle: 11/15 kW
Turning diameter: 400 mm
Turning length: 500 mm
Driven tools (VDI 40)
Bar feeder Multi 3000 LR 1640/80
ready for action
Spindle working hours: 4.700 h
Location: Eastern Germany
Availability: on demand more
- possible Installation for short or swiss-type lathes
- bar diameter 2-20 mm
- max. bar length 3210 mm
- min. bar length 700 mm
- bar capacity 260 mm
- bar changeover time 30 sec
- voltage 400 V
- weight ca. 680 Kg
- dimensions (LxWxH) ca. 4800 x 600 x 1500 mm
was installed at TRAUB A15
guide channel D 6 mm
Automatic barfeeder Brand: Barload Machine BA-65 Diameter of bar : 5 - 65 mm Machine weight : +/- 360 kg Air supply : 6kg/cm2 Power supply : 220 V Compressed Air supply Year: built in 2013 very little used Excellent condition See also enclosed documentation to be uploaded
STOCK NO.: 3238
MANUFACTURE: LNS, TYPE: ECO LOAD
SERIAL NO.: 2000043, BUILD: 2000
Max. Bar lengt 1200 mm
Min. / Max. Diameter 5-65 mm
Voltage 380 Volt
Length 1700mm, Height 1400mm, Width 1200mm, Weight 210Kg more
Bar loaders for lathes, bar feeder, Rod loader
Bar feeder TRAUB Stamag DNH 42 type
Year of construction 1998
Rod diameter 42 mm
Nominal length 4000 mm
The charger has no own control.
Can be driven but a Tan with TX8H control directly.
Bar diameter range: 24 - 65 mm
Bar length range: 3.2 m
Resize time of bar dimensions: 2 min
Method of the bar loading: manually
Guiding: hydrodynamic - in closed pipes
Feeding method: hydraulic - pressure
Oil volume: 120 l, ISO 100 oil
Length of machine: approx. 5 m more
Spinner Rod loader type BARLOAD 52 1 piece spinner-bar feeder type BARLOAD 52 commissioning as a new device in December 2010 to automatically change a new rods at the end of the bar in-progress.
Make SPINNER, for screws up to 52 mm bore, for material D = 5-51 mm, length up to 3,200 mm.
For lengths of spindle of a lathe to 1,300 mm (SPINNER TC400-52, TC600-52) for customers with rod milling with emphasis in the lower diameter range up to 42 mm and restricted occasional larger diameters up to ... more
- Diameter d 16-50mm
- Equipping laterally up to 8 bars at d 50 mm
- Ducts for d 20/26/32/38/44/52 mm
- Stopper for aligning square and hexagon
- PLC control
- Materials Processing of diameter 22 to 50 mm; 3000 mm long
- Year 1988
- Ducts partly broken
Place: D-72488 Sigmaringen
Visits by appointment gladly possible!
Delivery from the factory more
IEMCA short loader was relatively little in use (indicate previous owners)
Was previously built a hamlet DZ.
Quick charger is disconnected and stored, as unchecked offered
Bar feeder for lathe, bar loading magazine bar feeder FMB Hydrobar Type Turbo 3000/1700 make: LMS No. 3-200943 1989 rod diameters up to 38 mm material nominal length 3000 mm Material Max. 3200 mm compressed air 6 bar Power lubrication approximately 1.1 kW motor power feed 0.25 kW Power supply 380 V, 50 Hz - mechanical feed via chain drive gear motor - pipe end with collet 18 mm (18 mm collet is available) - open and close the Rod guide with pneumatic cylinders - rod guide by guiding inserts made... more
Rod length LED indication
Min./max. bar diameter: 5-32 mm
Max. bar length: 3100 mm
Side loading: 280 mm
Bar change time: 0.5 min.
Bar adjustability time: 2.0/12.0 min. (With/without exchange of sliding elements)
Length of remaining bar: 90-450 mm
Bar feed: hydrodynamic U-channel
Steady rest: Type "V" prism
Way of charge: Servomotor, chain
Oil volume: 65 L, ISO 100
Voltage: 3 x 400 V, 50 Hz
Weight: 750 kg more
Bar feeder FMB Turbo 5-65 XT year 1996 condition: very good bar stock up to 65 mm
Rod length of 3200 mm
1 x channel set of dia. 40 mm
Weight: 1,2 t
Footprint: L / B / H 4600 x 800 x 1400
Examples of application of Super hydro bar 6.42:
Tube ø = 44 mm rods Ø 39 mm to 42 mm
Tube ø = 40 mm rods Ø 33 mm to 38 mm
Guidance pipe ø 34 mm rod = Ø 27 mm to 32 mm
Tube ø 28 mm poles = Ø 21 mm to 26 mm
Tube ø 22 mm poles = Ø 14 mm to 20 mm
Tube ø = 14 mm rods Ø 6 mm to 13 mm
1 x charging tray
last mounted on index GU 600
round: 18-65 mm
hex: 16-55 mm
square: 14-46 mm
min: 2,000 mm
Max: 3,600 mm
Feed max: 24 m / min
Change time: approx. 45 sec.
Power plant: hydraulic motor
Dimensions: l: 5.1 x w: 0.85 x h: 1.25 m
Weight: 1,970 kg
Second charger in stock.
Material width - up to 200 mm
Feed / continuous / 0-125 mm
Material thickness up to 2 mm
maximum cycles / min - loud is located at. Diagram
Piston force at 6 bar - driving out 800 N
driving a 640 N
Clamping force 3000 N
Weight 18 kg
more info on request
Automatic bar loader IEMCA MASTER 880P for bars up to 80mm to 3.200mm diemeter complete with guides and spears up to 65mm. Year built 1999, "CE" mark.
Hydraulic bar feeder Asmut AB6 - diameters bar step 15-22-29-36-43-52mm
automatic bar loader LNS MINI SPRINT for bars up to 33mm diameter. Year Built 1995
sellable machines individually or in stock more
We offer you, a used bar loader from printing INDEX.
Type: MBL 65
Total length 5, 5m
Weight approx. 2t
Machine comes from liquidation and was dismantled in operation.
Our offer is aimed at commercial persons covered in the sense of the Gewerbeordnung GewO according to § 14.
The offer is subject to change reserved, sale. Please enter your full contact details to get a quote with our terms and conditions and terms of payment. Mistakes in the descriptions and offerings are subje... more
All information, offers and prices on this site are subject to change and non-binding!
By using this website, you acknowledge and agree to our Terms & Conditions and Privacy Statement.
All brand names are the property of their respective owners. Thorsten Muschler GmbH
does not accept any liability for the content of linked websites.