Used Bar Trolley for sale (15,284)

Condition: excellent (used), Professional fire-fighting motor pump from the renowned German manufacturer Ziegler (Albert Ziegler GmbH). This device is designed for water transfer—ideal for fire departments, agriculture, construction sites, and industrial applications. Robust, compact build on a transport frame (can be transported with a forklift truck). The pump is in good technical condition and complete as shown in the photos. Technical data: - Manufacturer: Ziegler (Germany) - Model: TS 8/8 - Year of manufacture: 1992 - Output: 800 l/min - Operating pressure: 8 bar - Speed: 4,400 rpm - Engine: petrol/gasoline - Operating hours: approx. 56 h - Weight: approx. 143 kg (ready for operation) - Standard: DIN 14410 / 14420 Condition: - Used - Normal signs of use - Technically flawless and fully operational Scope of delivery: Itjdsy D An Sjpfx Abnek - Ziegler motor pump - Firefighting couplings - Complete set as shown in the photos Additional information: - The price refers to 1 unit of the pump - Sold as shown in the pictures - Can be shipped on a pallet or collected in person

Condition: used, first registration: 02/1990, Year of construction: 1990, SPIERINGS Lattice Boom Tower Crane Motor vehicle: • Engine power: 222 kW / 305 HP / Displacement: 8,250 cm³ • Vehicle dimensions: 12,395 x 2,600 x 4,000 mm • Operating weight: 35,000 kg • GVW: 36,000 kg including 7,080 ballast weight • Tires: 445/65 R22.5 • 3 axles • 1st and 3rd axles steered • Rotating beacons Itedpfxowmpcze Abnsk Crane: • Max. reach: 30.4 m • Max. load capacity: 5,000 kg at 9.3 m reach • Drive type: hydraulic, hydraulic pumps electrically driven by external power or generator operation • Control type: electric Actuated proportional and control valves • Max. corner load: 204 kN • Max. speed: 85 km/h • Can only be moved from the undercarriage! Lifting gear: • Motor: Hydraulic variable displacement motor • Drive group: 1Am • Displacement: 20..55 cm³ • Max. feed pressure: 260 bar • Gearbox: Planetary gear, i=27 • Drum diameter: 375 mm • Max. rope pulling force: 25 kN • Corresponding rope speed: 30 m/min • Holding brake: Spring-loaded multi-disk brake Travel trolley: • Motor: Hydraulic Fixed displacement motor • Drive group: 1Am • Displacement: 16 cm³ • Max. feed pressure: 265 bar • Gearbox: Planetary gear, i=10.4 • Drum diameter: 200 mm • Max. rope pulling force: 6 kN • Max. speed: 50 m/min • With limit switch • Holding brake: Spring-loaded multi-disk brake Slewing gear: • Motor: Hydraulic fixed displacement motor • Displacement: 16 cm³ • Max. feed pressure: 300 bar • Gearbox: Planetary gear, i=160 • Max. uppercarriage speed: 1.3 rpm • Slewing brake: Hydraulic brake valve • Holding brake: Spring-loaded multi-disk brake Boom folding winch: • Drive group: 1Em • Motor: Hydraulic Fixed displacement motor • Displacement: 16 cm³ • Max. feed pressure: 220 bar • Gearbox: Planetary gear, i=92 • Drum diameter: 200 mm • Max. rope pulling force: 38 kN • Max. speed: 18 m/min • Holding brake: Spring-loaded multi-disk brake • With limit switch Load/load moment limiter: • Pressure switch on the hoist motor • Mechanical switch activated by bending the tower bogie Tower: • Working height: 20.8 m • Outer tower: Length 9.9 m, inner tower: 11 m Boom: • Crane boom in lattice construction; can be positioned horizontally or at a 30° incline • 1st boom section: Length 11 m / 2nd boom section: 11.1 m / 3rd boom section: 7.8 m - German machine! - Ready for use! Subject to errors and prior sale! = Further information = Purpose: Construction Upper arm length: 30.4 m

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2022, machine/vehicle number: 052022-28888-01, overall weight: 1,800 kg, total length: 9,700 mm, load capacity: 5,000 kg, working height: 6,000 mm, Equipment: documentation/manual, Verlinde 5,000 KG single-girder overhead crane in new condition. - Span: 9,538 mm - Lifting capacity: 5,000 KG - Lifting height: 6 m - Year of manufacture: 2022 - Control: radio-controlled Autec - Crane manual: available Speeds: Crane travel: 2 - 32 m/min. (Frequency controlled) Trolley travel: 5 / 20 m/min. (Relay controlled) Lifting/lowering: 0.80 / 5.00 m/min. (Relay controlled) Delivery, customization, installation, inspection, and commissioning are all possible upon request. Is this crane not exactly what you are looking for? We have more than 100 cranes and over 3,000 m² of parts in stock. Not all stock is listed online. Please call or email if you have any questions. We sell, among other things: - Overhead cranes - Underslung cranes - Column and swivel cranes - Chain hoists - Demag KBK rails and accessories Isdjzbyigopfx Abnotk - Vahle conductor bars Keywords: overhead crane, bridge crane, Abus, Demag, Kone, Konecranes, Stahl

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 6125, We sell a used CEVISA beveling machine CHP-60G INV, MFG 2024, SN: 6125 60 mm bevel length; capability in one run: 28 mm bevel length; bevel finish: machined (milling head); adjustable bevel speed depending on the material; optimum beveling speed: 500 mm/min; continual plate fixing pressure system: 4 Bar; 3 feeding rollers always in contact with the plate; 1 roller positioned in the cut-off point to insure: - no vibration; no noise; -smooth and unchanging finish; portable milling machine; mobile and stable; adjustable working height with pneumatic lifting system; electronic bevel adjustment; display: high precision; built-in adjustable bevel angles from 15º to 70º * Nominal thickness: from 10 mm to 100 mm. Motor: three-phase; motor power: 5 CV – 3.8 kW; voltage: 220/380 V. 50 Hz; 250/440 V. 60 Hz; 32 A plug, cable diameter: 2.5 millimeters, maximum consumption of the machine: max. 15A. Electric box with: thermomagnetic switch trip +emergency stop button, net weight: 800 kg; works height: adjustable from 760 to 940 mm; built-in trolley; bevel blueprint; plate beveling: K, V, X, and Y bevels, bevel speed: 0,5 m/min, three-phase motor: three phases and earth. no neutral, motor power: 5 hp - 3.8 kW, air flow rate 200 l/min. Electrical box: with under-voltage trip, emergency stop button, magneto-thermal protection; net weight of the beveling machine: 800kg, working height: adjustable from 760 to 940 millimeters. Integrated carriage. Iodpjv Ef Ryefx Abnotk Price: 37.000 Euro + VAT, negotiable, FCA Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2026, condition: like new (used), functionality: fully functional, - inside diameter 900 mm and inside length 2500 mm - door with the locking system (manually) - fan inside the tank with the electrical engine outside - water cooled Itodjzkwh Dopfx Abnjk - 8 vacuum ports - electrical heating about 15 kw coils - Working pressure 10 bar - Adjustable AIR max. working temperature 180 °C - Equiped with related valve and pipes -With an inside trolley and outside cart -With 1 set of installation accessories -With automatic control system - PLC unit is Siemens Simatic S7 -With the installation air accessories - weight 1300 kg

Condition: excellent (used), Professional hydraulic set from the renowned manufacturer HURST / Hale Fire Pump Co., used in technical rescue applications (fire brigade, rescue services). ——— Condition: Used, fully operational, and tested equipment Shows normal signs of use as seen in the photos Technically in good condition – ready for work ——— Technical specifications: • Model: SP 45 • Manufacturer: Hale Fire Pump Co. / HURST • Year of manufacture: 1992 • Operating pressure: 350 BAR • Power supply: 230V (single-phase) • Standard: DIN 14751 ——— Set includes: • HURST hydraulic pump • Hydraulic shears • Spreader • Hydraulic hoses (2 pcs.) • Cable drum • Set of quick couplings • Transport frame ——— Applications: Iodpfoyxr Dxsx Abnstk • Road rescue • Technical work and demolition • Rescue services / Volunteer / Professional fire brigades • Industry (spreading, cutting) ——— Advantages: • Robust, professional construction • High cutting and spreading force • Proven HURST technology • Complete set – ready for immediate use

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2022, machine/vehicle number: 052022-28888-03, overall weight: 2,700 kg, total length: 13,500 mm, load capacity: 5,000 kg, working height: 6,000 mm, Equipment: documentation/manual, Verlinde 5,000 KG single-girder overhead crane in new condition. 2 units available. - Span: 13,227 mm - Lifting capacity: 5,000 KG - Lifting height: 6 m - Year of construction: 2022 - Control: radio-controlled Autec - Crane documentation: available Itodozbyiajpfx Abnsk Speeds: Crane travel: 2 - 32 m/min. (Frequency controlled) Trolley travel: 5 / 20 m/min. (Relay controlled) Lifting/lowering: 0.80 / 5.00 m/min. (Relay controlled) Delivery, customization, installation, inspection, and commissioning are all possible upon request. If this crane isn't exactly what you're looking for, we have more than 100 cranes and over 3,000 m² of parts in stock. Not all stock is listed online. Please call or email if you have any questions. We sell, among other things: - Overhead cranes - Underslung cranes - Column and jib cranes - Chain hoists - Demag KBK rails and accessories - Vahle conductor bars Keywords: overhead crane, bridge crane, Abus, Demag, Kone, Konecranes, Stahl

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 13/15, Equipment: documentation/manual, DRYER FOR FRESH PASTA, FRUIT, NUTS ESC100 Dryer that allows the wrapping, pre-dressing and drying of short, long and stuffed pasta, as well as the drying of pasteurized pastes before a possible packaging. Capacity for drying cycle: 100 kg approx Panels injected with hot injected polyurethane foam, with high thermal stability, in white pre-painted sheet Electric heaters for air heating (1,2 Kw x 3 = 3,6 Kw) 500 mm axial fan for forced air circulation (1 Kw approx.) Electrical panel with PLC board for setting and checking drying phases N ° 2 Butterfly valves controlled by Belimo electric actuator Probe for internal humidity control Instrumentation for checking drying and temperature times controlled by an EC-compliant electrical panel with programmable digital electronic card N ° 25 frames in fir wood 600 x 1200 mm, with polyester mesh and aluminum sealing bars N ° 1 Stainless steel trolley on wheels Technical data Voltage: 400 V – Three-phase Total power: about 5 Kw Dimensions Depth: 1000 mm (+ 300 mm above the door) Itedpfx Abotrd N Ejnsk Width: 1670 mm Height: 2260 mm (+ 400 mm humidity extractors)

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, VEMAG HP20E + LPG209 + AH212 | Sausage filling, linking and hanging line Vacuum filler with integrated butcher's lift: Manufacturer: VEMAG Maschinenbau GmbH Model / Type: HP20E Serial number: 1631079 Year of manufacture: 2017 Power supply: 480 V, 38 A, 3 Ph, 50/60 Hz Weight: 1400 kg Dimensions: 1800 x 1500 x 2000 mm Equipment: Integrated vacuum pump, mast-type loading lift for standard butcher's trolleys (carts) with a capacity of 200 liters Automatic linker: Manufacturer: VEMAG Maschinenbau GmbH Model / Type: LPG209 Linker Itedszhgykepfx Abnsk Serial number: 2090310 Year of manufacture: 2017 Power supply: 400 / 460 V, 18 A Power: 5.5 kW Working air pressure: 6 bar Weight: 657 kg Dimensions: 1700 x 1100 x 1600 mm Hanging line (automatic hanger): Manufacturer: VEMAG Maschinenbau GmbH Model / Type: AH212 Hanging Machine Serial number: 2120577 Year of manufacture: 2017 Power supply: 400 - 460 V, 3 Ph, 50/60 Hz Power: 0.5 kW Weight: 298 kg Dimensions: 4000 x 800 x 1500 mm Vemag is the undisputed global leader in portioning technology, and the presented set is a fully automated industrial line designed for the mass production of sausages, frankfurters and other products in natural, collagen and artificial casings. The heart of the set is the reliable Vemag HP20E vacuum filler, based on a proven system of conveying screws. The machine guarantees extremely gentle handling of the filling, eliminating smearing of fat and the formation of air bubbles inside the product. The integrated mast lift for 200 l trolleys drastically reduces downtime, ensuring a smooth supply of raw material to the hopper. The second key element of the line is the technically advanced Vemag LPG209 linker. This device eliminates the traditional bottleneck in meat production – it automatically and with surgical precision portions and links the sausages, maintaining the identical weight and length of each section. Thanks to its unique gripper system, the linker minimizes casing breakage even at extremely high operating speeds, which translates into real savings of raw materials. The final link in the system is the Vemag AH212 automatic hanger. It picks up the formed portions directly from the linker, arranges them in perfect loops and precisely hangs them on the transport hooks of the hanging line. These prepared batches of product are immediately ready to be manually or automatically transferred to smoking sticks. The entire set is fully synchronized electronically, creating a monolithic production unit managed from a single level, ideal for medium and large meat processing plants, butcher shops and industrial-scale slaughterhouses.

Condition: good (used), Year of construction: 2001, Air-operated airless pump on a pump trolley The T2001 piston pumps are robustly constructed air-operated airless pumps designed for conveying, transferring, and painting with multiple guns. The parts that come into contact with the material are made of stainless steel, carbide, PTFE, or PE. ATX approval for use in potentially explosive atmospheres completes the picture and makes the pumps versatile. Below you will find the advantages at a glance: - Minimal pulsation for a consistent material flow during pumping and spraying - Versatile thanks to stainless steel, carbide, PTFE, or PE in the material area - Suitable for liquid solvents and water-based materials - Easy commissioning thanks to the self-priming system - Maintenance-free device, no lubrication required - Integrated safety valve in accordance with accident prevention regulations - Mobile versions on pump trolleys - ATEX approval Ex II 2 Gc IIB T6 Manufacturer: Kopperschmidt Spritztechnik Device type: T2001-60.135 Maximum material flow rate: 9.0 l/min Suction head (empty pump): 1.5 mWS Suction head (filled pump): 6.5 mWS Material temperature: +10 to +85 °C Isdpfx Abert Uy Nsnstk Maximum stroke rate (short): 50 cycles/min Maximum stroke rate (continuous): 20 cycles/min Maximum material pressure: 6 bar Transmission ratio: 60:1 Volume per cycle: 270 cc Maximum operating pressure: 360 bar ATEX: Ex II 2 Gc IIB T6 Air connection: G3/4" Material outlet: G3/8" Material inlet: G1" Weight: 45 kg Customs tariff number 8424 8970 Year of manufacture: 2001 New price: €13,600 incl. VAT. Financing through our bank is also possible. komplett-konzept.leasingo.de You can find other items in other sizes – new and used – in our shop! International shipping costs upon request!

Year of construction: 2018, condition: used, We offer this used MKN HansDampf AutoChef convection-steam oven, manufactured in 2018. Manufacturer: MKN Model: HansDampf AutoChef Serial number: 12345 Year of manufacture: 2018 Supply voltage: 400/230 V Frequency: 50 Hz Connected load: 32 kW Fuse rating: 63 A Maximum steam pressure: 2.5 bar Includes loading trolley Equipped with automatic cleaning mode Iodjzbyqkopfx Abnotk 2 units available. If you have any questions or require further information, please send a message or contact us by phone.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Frey C-Line | Portioning Machine Manufacturer: Heinrich Frey Maschinenbau GmbH Model: C-LINE Type: CLB LINEAR Machine No.: CLB 1191638 Year of manufacture: 2018 Power supply: 400 V Frequency: 50/60 Hz Power: 7.00 kW Operating pressure: 6 bar Conveyor belt: Plastic Belt width: (2×) 290 mm Working width: 155 mm Clearance: 290 × 30 mm Overall machine dimensions: 1900 × 1200 × 1400 mm Additional equipment: Wolf head system: Type WK132, Ø 95 mm Portioning device: Ø 75 mm, working width 160 mm Transport set: 2 stainless steel trolleys with spare parts and accessories, dimensions: 710 × 500 × 1015 mm 960 × 660 × 1035 mm Itjdpfxey Rhxps Abnsk The Frey C-Line portioning system is an advanced solution for the food industry, designed for precise forming and dividing of meat or plant-based products. The 2018 machine features high efficiency courtesy of a 7 kW motor and stable operation with a pneumatic system at 6 bar. Robust German engineering and a complete set of accessories (including the wolf head system) enable quick integration into a production line while maintaining the highest hygiene standards.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 6119, We sell a used CEVISA beveling machine CHP-60G, MFG 2024, SN: 6119 Itjdpfx Aov Ed N Iebnek 60 mm bevel length; capability in one run: 28 mm bevel length; bevel finish: machined (milling head); adjustable bevel speed depending on the material; optimum beveling speed: 500 mm/min; continual plate fixing pressure system: 4 Bar; 3 feeding rollers always in contact with the plate; 1 roller positioned in the cut-off point to insure: - no vibration; no noise; -smooth and unchanging finish; portable milling machine; mobile and stable; adjustable working height with pneumatic lifting system; electronic bevel adjustment; display: high precision; built-in adjustable bevel angles from 15º to 70º * Nominal thickness: from 10 mm to 100 mm. Motor: three-phase; motor power: 5 CV – 3.8 kW; voltage: 220/380 V. 50 Hz; 250/440 V. 60 Hz; 32 A plug, cable diameter: 2.5 millimetres, maximum consumption of the machine: max. 15A. Electric box with: thermomagnetic switch trip +emergency stop button, net weight: 800 kg; works height: adjustable from 760 to 940 mm; built-in trolley; bevel blueprint; plate beveling: K, V, X, and Y bevels, bevel speed: 0,5 m/min, three-phase motor: three phases and earth. no neutral, motor power: 5 hp - 3.8 kW, air flow rate 200 l/min. Electrical box: with under-voltage trip, emergency stop button, magneto-thermal protection; net weight of the beveling machine: 800kg, working height: adjustable from 760 to 940 millimeters. Integrated carriage. Price: 34.000 Euro + VAT, negotiable, FCA Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. / Wir sprechen Deutsch. / Beszélünk magyarul. /Nous parlons français/Vorbim română

Condition: like new (used), Year of construction: 2020, operating hours: 574 h, functionality: fully functional, consisting of: additional vacuum tank for workpiece clamping, complete with vacuum distributor and control logic for automatic cycle KW6.6 / 9 HP (S6) electrospindle teleservice system cable remote control for easier positioning and adjustment Robot: automatic loading and unloading system for glass sheets Loading and unloading trolley with lockable wheels Mechanical/electronic device on the robot head for centering the workpiece on the working surface Pneumatically retractable workpiece stop Various double vacuum suction cups Various tool sets incl. reverse osmosis system type IDROTECNICA "IDRO RO 130 ST" max. 130 l/h VERTICAL 500 plastic storage tank 500 l Stand for storage tank SE15002 conductivity test kit incl. FILTRAGLASS ECO-BOX CNC grinding coolant water treatment unit incl. stainless steel chamber tank approx. 3,000 l, 3,000 x 1,000 x 1,000 mm, 3 chambers, circulation pump, agitators, filter system approx. 800 x 600 x 1,780 mm, electrical connection 230 V / 1.5 kW, compressed air connection on-site 7-8 bar (480 Nl/min) Dismantling/removal to be carried out by the buyer Itedpew H R A Nefx Abnok

Year of construction: 2021, operating hours: 500 h, condition: like new (used), functionality: fully functional, DLyte PRO500 Dry Electropolishing System – Complete Set – Only 500 Operating Hours For sale: DLyte PRO500 by GPAINNOVA, a complete dry electropolishing / surface finishing system. The machine is in excellent condition, almost like new, with only approximately 500 operating hours. It has been used in a clean production environment and is fully functional. The set can be inspected and tested at our factory before purchase. Included in the set: * DLyte PRO500 machine * SMC Thermo Chiller HRS150-AF-40 * Original workpiece holders / fixture system, as shown in the photos * Mobile holder trolley / storage system * Accessories, as shown in the photos Machine details: * Manufacturer: GPAINNOVA / DLyte * Model: PRO500 * Article No.: GP4012691 * Serial No.: 200300-000081 * Year: 10/2022 * Weight: approx. 1600 kg * Rated power: 25 kW * Voltage: 400 Vac, 3P + N + GND * Frequency: 50–60 Hz * Rated current: 35 A * Full-load current: 40 A * Air supply: 6–7 bar Chiller details: * Manufacturer: SMC * Model: HRS150-AF-40 * Year: 2023 * Cooling capacity: 5 kW * Power supply: 3-phase, 380–415 V, 50/60 Hz * Refrigerant: R410A * Weight: approx. 177 kg Condition: * Very low usage: approx. 500 operating hours * Excellent technical and visual condition * Ready for production * Tests can be performed at our factory before purchase Price: Ijdpfoziln Asx Abnotk €250,000

Year of construction: 2023, condition: used, VIOLI Drawing Bench VM/TRI25-3s Manufactured in 2023 The VIOLI Drawing Bench VM/TRI25-3s is a robust and innovative machine designed for precise and efficient metal drawing, featuring a 3-meter useful length and a powerful 2,500 kg pulling capacity. Its patented hydraulic system ensures linear pulling, compact design, and consistent quality. TECHNICAL SPECIFICATIONS Useful Length: 3 Meters Pulling Power: 2,500 kg Drawing force: Max. daN 2500 Operating hydraulic pressure: 180 bar Drawing speed: Min. 0 m/min. - Max. 17 m/min. Drawing reduction: Around 15% of the section Clamping force POINTER: 100 Ton Tolerance: 1 mm Power supply: 400 V - 50 Hz Electric power: 9,2 KW Hydraulic oil: ISO 46 Motor Power: 9.2 kW - 380 V, 50 Hz Noise: At the workplace LP < 70 dB(A) Hydraulic System: Proportional hydraulic pump Carriage Sliding: with ball circulation guides Construction and movable installation of a hale holder to house 1 O hales in line with the trolley; Predisposition for cooling the lubricating oil with the insertion of a stainless steel pipe coil in the tank; Adjustable Die holder; Bar support system; Tank with pump for lubrication; Opening/ closure of pliers operated manually by pneumatic pistan; Compliance: Machine comply with the UE conformity regulations. DETAILED FEATURES Operating System: The system uses a hydraulic piston and patented technology for optimizing space, ensuring linearity with the drawing hole, and minimizing bending of the supporting structure. It allows for a compact die length and double the useful pulling stroke. Caliper Return: A patented double-circuit chain technology returns the caliper to its starting point. This allows the hydraulic piston's length to be half of the useful working stroke. Pulling Power: The pulling power is in line with the drawing die. Speed Control: Manual adjustable speed from 0 to 16 meters per minute (0−16 Mt/m). It offers fine regulation of the speed and constant speed derived from the hydraulics. Tolerance: The tolerance is 1 mm. Hydraulic System: Features a proportional hydraulic pump. Motor Power: 9.2 kW - 380 V, 50 Hz. Carriage: Carriage sliding with ball circulation guides. Hole Holder: Construction and movable installation of a hole holder to house 10 holes in line with the trolley. Lubrication: Includes a lubrication tank with a lubrication pump. There is also a predisposition for cooling the lubricating oil with a stainless steel pipe coil in the tank. Die Holder: Adjustable. Bar Support: Includes a bar support system. Pliers Operation: Opening and closure of pliers are operated manually by a pneumatic piston. Control Panel: The machine is equipped with a control panel FUNCTION The hydraulic drawing bench VM/TRI253S is a machine used for the cold reduction of the cross section of a metallic rod, both with round or shaped profile, or of an empty or “animated” metallic tube. The reduction of the section is obtained by passing the product through a calibrated drawing die and pulling it, using a mechanical clamp with the force required to obtain the reduction of the section. COMPOSITION OF THE DRAWING BENCH The machine is composed of the following main components: - Metal structure - Carriage equipped with a hydraulically controlled clamp - Carriage drive unit - Hydraulic system - Electrical system Metal structure Itodpfxoyl U Sqe Abnok The metal structure is composed of a recirculating ball guide. At the end of the rails, a suitable sized plate supports t...

Condition: used, Year of construction: 2011, operating hours: 44,240 h, Right-hand side configuration, consisting of: 8 feeder units, of which 4 are extended, 6 feeders (of which 4 are stream feeders with extensions to the bar system), 1 slitter/scorer feeder, 1 product gluing unit, 1 stapling station with first sheet control and staple control, 1 trimmer with cut control SEMKO, lateral thickness control, diagonal edge control/overhang control, optical sheet control ASIR (also barcode), 1 turner, 1 addressing table, 1 cross feeder Robusto, 4 unwinding devices EASYDRUM (45 kg rolls), 1 trolley for transferring the feeders (shingling/flat-stacking feeders), 1 trolley for transferring the product sample gluing unit. Iodpfx Aozqzbhebnotk

Condition: ready for operation (used), Year of construction: 2000, number of axes: 4, total height: 2,550 mm, total width: 2,400 mm, overall weight: 13,000 kg, product length (max.): 12,000 mm, This 4-axis HUNDEGGER K2-A was manufactured in 2000. It features a workpiece cross-section capacity ranging from 20 x 50 mm to 300 x 450 mm, with a minimum workpiece length of 300 mm in automatic mode. The machine includes various components such as an under-table swivel cut-off saw and a universal milling unit. If you are looking to get high-quality CNC wood machining capabilities, consider the HUNDEGGER K2-A machine we have for sale. Contact us for further details. Ijdpfjzugw Aex Abnstk - Machine Type: Fully Automatic Joinery Machine- Workpiece Cross-Section Min.: 20 x 50 mm- Workpiece Cross-Section Max.: 300 x 450 mm- Minimum Workpiece Length (Automatic Mode): 0.3 m (300 mm)- Operating Voltage: 400 / 230 V (3/N/PE)- Electrical Frequency: 50 Hz- Fusing Protection: 3 x 63 A- Peak Power Requirement: 15 kW- Operating Compressed Air Pressure: 8.5 bar (Max: 10 bar)- Compressed Air Flow Requirement: > 600 l/min- Hydraulic Operating Pressure: 100 bar- Noise Emission Level (LpA): 79 dB(A) ± 3 dB(A)- Transport Dimensions (L x W x H): 12.00 m x 2.40 m x 2.55 m- Included / Equipping Components:* Under-table Swivel Cut-Off Saw with HM saw blade (D=735 mm, s=6.0 mm)* Universal Milling Unit with cylindrical cutterhead (D=350 mm, B=120 mm)* Vertical Combo Support* Horizontal Combo Support* Rafter Nail Drilling Unit* Slotting / Mortising Unit* Infeed & Outflow Conveyors / Positioning Trolleys

Condition: used, Year of construction: 2019, Numerical control with bSolid software The multi-document software application in Windows environment allows the design of the finished product, the definition of its processes, the definition of the work plan, the simulation of the piece machining operations on the 3D model of the machine and generation of the necessary machine programs. bSolid - 3-Axis Machining bSolid - 5-Axis Machining Module for surface machining with 5-axis units and interpolation movements on all 5 available axes (X,Y,Z,C,B). The module includes the following commands: · assignment to surfaces three-dimensional roughing and finishing operations · spread or project a path onto a curved surface machining lying on a plane · follow 2D or 3D curves with any type of tool bSolid - 3D Engraving bSolid - Import external formats Fields of work: X = 5055 mm; Y = 1650 mm (may vary depending on configuration) Z = 200 mm with modules H=74 mm Z = 245 mm with modules H=29 mm Loadable piece in Y: * 1650 mm, with thickness up to 60 mm on H=74 mm modules * 1600 mm, with thickness over 60 mm on H=74 mm modules. 10 ATS floors – 40 trolleys The code includes: • 2 aluminium bars (n. 1 left and n. 1 right) on which the lateral stops slide. • 10 aluminum worktops. The worktops slide on hardened and ground linear guides using recirculating ball bearing slides. Locking occurs on both linear guides, front and rear, by means of four pneumatic cylinders. The control is activated by a button located in front of the work surface. The carriages slide on steel guides positioned above the extrusion. Pneumatic locking system divided into 2 locking zones in X Automatic positioning (EPS) for worktops. "EPS" (Electronic Positioning System) device for the automatic positioning by NC of the work surfaces and trolleys complete with locking devices capable of eliminate possible operator errors. Rear row stop, with 140 mm stroke Intermediate row stop, positioned at 405 mm, with 140 mm stroke. Front row stop, positioned at 1460 mm, with 140 mm stroke 4 lateral stops, with 140 mm stroke (2 right + 2 left) with system 2 additional side stops, with 140 mm stroke (1 right + 1 left). Sensor for checking whether the stops have descended 12 clamping devices for clamping narrow workpieces 6 loading aid bar lifts, for H=74 mm modules Configuration 5A, for Rover B. Configuration for high productivity and flexibility, thanks to the two operating groups 4 and 5 axes and the possibility of performing tool changes in concurrent time. It includes the axes and carriages for the movement of the main operating groups. Includes 2 inverters. Second Y-axis. Introduces the separation of the front and rear Y-carriages, with independent motorization. The two Y-carts have a maximum speed of 118 m/min. 13.2 kW (17.7 HP) electrospindle, HSK F63 connection, air-cooled. Main features: • 11 kW (14.7 HP) from 12,000 to 15,000 rpm in S1 service. • 13.2 kW (17.7 HP) from 12,000 to 15,000 rpm in S6 service. • Bearings ceramics. • Right and left rotation. • Rotation speed from 1,000 to 24,000 rpm programmable by NC. • The release pneumatic operation is carried out via a prismatic linear guide and recirculating ball bearings. A cover is included for chip extraction, with 6 different positions in Z managed by the NC, depending on the length of the tool, or by program. The suction mouth is automatically closed when the electrospindle is not working. Provision for subsequent installation of the 360° operating group (C-axis) Revolver tool maga... Iedpfx Aew D E A Ejbnetk

Condition: good (used), Resato HBU-B160 Gas High-Pressure Workshop Test System The oil and gas industry revolves around the production of crude oil and natural gas. One of the challenges is to optimally utilize the equipment to produce more from the available resources. Various high-pressure applications can contribute to this. Pressure testing guarantees the quality and safety of oil and gas production components. The well is stimulated by injecting a chemical fluid. High-pressure systems control and regulate back pressure and fluids with the control system. This allows oil and gas to be produced more safely. Manufacturer: Resato HBU Test System Type: HBU-B160 Max. pressure: 200 bar Max. capacity: 1570 cc / Max. pressure: 7 bar 2 x Gas cylinder holders 3 x Gas cylinder trolleys Digital control panel missing Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! Ijdpor Hmihefx Abnjtk International shipping costs on request!

Condition: good (used), Year of construction: 2002, Vacuum cooker melter, ribbon blender, horizontal. For mixing and cooking under vacuum viscose products like processed cheese, pet food, standardization, etc. Double jacketed for indirect heating or cooling and direct heating by steam injection, 6 x steam injection ports. Max pressure in jacket 2 bar water or steam max 3,5 bar, CIP cleanable by 4 x spray balls. 1 outlet hatch pneumatic openable. With vacuum system, water dosing system with flow transmitter . Closed cover, pneumatic liftable, integrated liquid ring vacuum pump. Ingredient inlets: by separate elevator and standard 200 liter trolleys (elevator: KS type 602, 1,1kW - max 250 kg). Control panel with PLC (Siemens S7-300 controls), frequency converters. Display operation panel. Dimensions product room: 100 x 100 x 82 (lxwxh) cm. Documentation available. Itedew Uzzkjpfx Abnek

Condition: excellent (used), Year of construction: 2024, For sale: Professional water treatment and preparation unit – UWS Heaty Profiline 100 No 2. This is a mobile device designed for use in heating systems, water installations, and HVAC service. Perfect for flushing, filling, and treating installations. Equipment is in excellent technical condition, fully complete and ready for operation. ⚙️ Technical data: Manufacturer: UWS Technologie GmbH Model: Heaty Profiline 100 No 2 Year of manufacture: 2024 Power supply: 230 V / 50–60 Hz Power: 0.5 kW Weight: approx. 59 kg Max. operating temperature: 80°C Max. pressure: 6 bar 🔧 Equipment features: - Integrated tank - High-quality EBARA pump - Flow meters - Pressure gauges - Control valves - Mobile transport trolley - Documentation and accessories (as seen in the photos) 🔍 Condition: - Used device - Very good technical condition - Minor, normal signs of use - Fully complete ⚠️ Remarks: Itjdpfx Aboyz Dhzensk - One pressure gauge has a damaged housing/cover (visible in the photos) - Operation of this pressure gauge has not been checked - The part can be easily replaced if needed 📦 Applications: - Heating installations - Water installations - Service and cleaning of installations - HVAC systems 🚚 Delivery: - Pallet shipping available - Collection in person possible

Condition: used, Year of construction: 1995, working width: 1,300 mm, compressed air connection: 7 bar, Machine type: Coating and laminating line for coating, lacquering, and laminating from roll to roll using solvent-free adhesives. Manufacturer: NORDMECCANICA Type: Duplex Compact Model: Duplex C - SL1300 Year of manufacture: 1995 Web width: 650 to 1,310 mm Laminating width: Up to 1,300 mm Speed: Mechanical up to 300 m/min. Materials for coating: BOPP 15 - 80 µm PETP 12 - 30 µm LDPE, LLDPE 40 - 200 µm OPA 12 - 18 µm NYLON CAST 50 - 80 µm ALUMINIUM 15 - 40 µm PP CAST 60 - 150 µm SATIN PAPER 40 - 300 g/m2 Materials for lamination: BOPP 12 - 80 µm PETP 12 - 30 µm LDPE, LLDPE 20 - 200 µm OPA 12 - 18 µm NYLON CAST 20 - 80 µm ALUMINIUM 7 - 40 µm PP CAST 25 - 150 µm EVOH 12 - 20 µm CAST MATERIALS 25 - 200 µm SATIN PAPER 40 - 300 g/m2 Unwind A: Model 850 Roll change Automatic up to 300 µm Roll diameter 90 to 850 mm Itedsy Hgwpepfx Abnok Roll weight Up to 900 kg Core diameter 70/76/150/152 mm Web tension 2.5 to 55 kg Coating thickness Up to 300 µm Pre-treatment Corona Unwind B: Model 850 Roll change Automatic up to 300 µm Roll diameter 90 to 850 mm Roll weight Up to 900 kg Core diameter 70/76/150/152 mm Web tension 2.5 to 55 kg Coating thickness Up to 300 µm Pre-treatment Corona Coating and laminating unit: For solvent-free adhesives. Coating section with 4 rollers, 2 of which are heated. Laminating section with 3 rollers. Rewind: Model 850 Roll change Automatic up to 300 µm Roll diameter 170 to 850 mm Roll weight Up to 900 kg Core diameter 150/152 mm Web tension 6 to 55 kg Coating thickness Up to 500 µm Mixing and dosing unit: Manufacturer: DOPAG, Switzerland Model: Variomix Heating elements. 1 trolley for mounting transfer rollers for adhesives. Electrical connection: 220 / 3 x 400 V, 50 Hz Installed power: 180 kW Maximum current draw: 90 A Average power: 35 kW Compressed air connection: Input pressure: 7 and 10 bar Max. consumption: 400 l/min Water consumption: 2,000 l/h Various spare parts included. Standards: CE, CEE 89 / 392 ff. EN 60 204-1, SUVA Condition: Used (occasion) Availability: Immediately

Condition: excellent (used), functionality: fully functional, Vemag HR 2x5=10 | Set of 3 industrial smoking and steaming chambers (Total capacity for 30 trolleys) Technical specifications of the set (3 chambers): Manufacturer: Vemag Anlagenbau GmbH Model / Type: HR 2x5=10 (Two-row system) Capacity of a single chamber: 10 standard smoking trolleys (2 rows of 5 trolleys each) Total capacity of the set: 30 Euro / standard trolleys Power supply / Heating medium: Steam Detailed technical data for each chamber: Chamber 1 (Year 1990): Serial number: 5202023 Steam heating: 6–10 bar (max. 800 kg/h) Steam humidification: 0.1–1.2 bar (max. 400 kg/h) Compressed air: 3–8 bar (max. 2.5 Nm3/h) Chamber 2 (Year 1993): Serial number: 520.2359 Steam heating: 6–10 bar (max. 800 kg/h) Steam humidification: 0.1–1.2 bar (max. 270 kg/h) Compressed air: 3–8 bar (max. 2.5 Nm3/h) Chamber 3 (Year 1993): Serial number: 520.2389 Steam heating: 6–10 bar (max. 800 kg/h) Steam humidification: 0.1–1.2 bar (max. 270 kg/h) Compressed air: 3–8 bar (max. 2.5 Nm3/h) Dimensions (for each individual chamber): Internal dimensions: 1230 × 5250 × 2100 mm Overall external dimensions: 3300 × 5750 × 4500 mm Control cabinets included: 3 units, dimensions of each: 800 × 340 × 1000 mm The set does not include smoke generators The Vemag HR 2x5=10 is a powerful, highly advanced industrial system designed for the thermal processing of meat, sausages, poultry, and other food products. The presented set, consisting of three robust steam and smoking chambers, constitutes a complete production line capable of handling up to 30 smoking trolleys simultaneously, making it an ideal solution for large-scale industrial processing plants. Itodpfxsy Ua Rxs Abnek The chamber design is based on a two-row system (2 rows of 5 trolleys each), which ensures optimal air and smoke circulation, and therefore a perfectly even distribution of temperature and color at each trolley level. Key advantages: - High-performance steam heating: The use of a steam system operating at a pressure of 6–10 bar allows for rapid achievement of the desired temperatures, reducing the steaming and baking time to a minimum, which directly translates into lower weight loss of the finished product. - Precise humidity control: Individual steam humidification systems (up to 400 kg/h in the older model and up to 270 kg/h in the 1993 models) guarantee full control over the climate inside the chamber, which is crucial for achieving the ideal juiciness of the products.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, * Mori Seiki NL 2500 SY. * Year 2009. * Y-axis. * C-axis. * 5-axis machine. * 1.5-meter Lns Quick Load bar loader. * Sub-spindle. * 12-station turret, all stations motorized. * Y-axis travel: ±60 mm. * C-axis on both spindles. * Integrated main spindle motor: 18 kW. * Integrated sub-spindle motor: 15 kW. * Direct-drive motor for powered tools: 5.5 kW. * Motor starting torque: 640 N·m. * Motors without belts or gear stages. * Main spindle size: A2-8. * Sub-spindle size: A2-6. * Bar capacity: 80 mm. * 250 mm Kitagawa B-210 main spindle chuck with metric system. * 210 mm Kitagawa B-208 sub-spindle chuck with metric system. * Prismatic guides on all axes. * Main spindle speed: 4,000 rpm. * Motorized tool speed: 6,000 rpm. * Daikin oil cooler for both spindles. Itjdpfxozuxm Aj Abnek * Mapps 4 conversational automatic programming system. * Automatic force control and tool wear monitor. * Rapid traverse speed: 30 m/min on the X and Z axes. * Turret indexing time: 0.2 seconds. * Two Renishaw arms for automatic tool measurement. * Communication ports via USB, PCMCIA card, and RS-232. * Installation interface for bar loader. * Automatic workpiece collector. * Dual pedal for independent opening and closing of the main spindle and sub-spindle. * Side-mounted hinged chip extractor. * Extensive range of static and motorized tool holders. * Electrical transformer. * Documentation, parts list, electrical schematics, programming, and operating manual. * Weight: 5,800 kg. * Machine is currently in operation. * It is essential to check the precision videos. * Immediate delivery, unless sold immediately.