Used Feed Line for sale (27,599)

Condition: new, Year of construction: 2025, functionality: fully functional, number of straightening rollers: 7, coil weight: 6,000 kg, coil outer diameter: 1,600 mm, coil inner diameter: 508 mm, conveyor belt thickness: 6 mm, number of feed rollers: 2, conveyor belt width: 600 mm, 6x600 mm Press Feed Line General Specifications Min. and max. sheet width: 120-600 mm, Min. and max. sheet thickness: 0.6-6.0 mm, 6-ton unwinder Components: Siemens, Hydac, Wattdrive, SKF, Sick, Festo. Price includes: feed line, die recognition system, safety fencing, transport to your location, installation and integration with the press, process commissioning, operator training, exceptional customer service, warranty and post-warranty service throughout Poland, first inspection after one year – free of charge, Codpfx Abjrt U R Se Tsaa 24-month warranty on the entire line, attractive purchase terms, leasing financing available

Year of construction: 2021, operating hours: 1,513 h, condition: used, functionality: fully functional, overall weight: 11,500 kg, total length: 6,050 mm, total width: 2,450 mm, total height: 2,700 mm, machine/vehicle number: B205, Our robust FEED HOPPER is specifically designed for the precise dosing of challenging, hard-to-meter feed materials. Equipped with a plate belt, the hopper reliably handles abrasive or coarse-grained materials. With a capacity of 7 m³ and an optionally integrable leveling roller, the feed rate can be adjusted. This module is part of our rental fleet. Cedpfx Abjxta D Tj Teaa

Condition: used, Year of construction: 2022, operating hours: 289 h, functionality: fully functional, machine/vehicle number: B0201, total width: 2,450 mm, total length: 6,050 mm, total height: 2,700 mm, empty load weight: 9,600 kg, Our FEED VIBRO features a combination of feed hopper, leveling roller, and dosing slide, ensuring consistent material feed. Thanks to the integrated drum magnetic separator with selectable strength, magnetic particles can be sorted. If pure dosing without magnetic separation is required, the magnet system can be deactivated. This module is part of our rental fleet. Cjdpfx Asxrtt Seb Tjaa

Condition: good (used), Year of construction: 2000, Weinig High Mech E6 infeed + A5 outfeed + stacker 1. Weinig pack infeed roller conveyor. 2. Weing pack tilt 3. Weinig flat chain cross feed conveyor with single board feeder. 4. Weinig reject sorting unit with roller tracks. 5. Weinig EM814 moulder infeed with flat chain feeder. 6. Weinig outfeed 3m belt accelerator conveyor. Caodoxtwmropfx Ab Toa 7. Roller conveyor with cross feed chain kickers. 8. Weinig cross feed buffer belt conveyor. 9. Weinig flat chain stacker with scissors lift roller conveyor. 10. Weinig pack outfeed roller conveyors. Possible to offer with additional Weinig bundling system if needed.

Condition: used, Year of construction: 2015, Coiltech strip line consisting of: servo feeder, straightening machine, decoiler. Strip width: 100-800 mm. Strip thickness: up to 5.5 mm. Cedpfx Aoxfcdgsb Toaa

Condition: excellent (used), CNC-Gantry Flexible Automatic through-feed Boring Machine with Dowels inserting system Movable panel (horizontal position of workpiece/panel), movable working head Numerical Control Power Control, Software WoodWOP Overall integral safety cabin (enclosure) of the machine Panels (workpieces) feeding by motorized belts 3 Feeding speed (m/min) 1 - 90 (ca.) Caodpfxsd Nvi De Ab Tsa Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 12 Maximum workpieces dimensions (X - Y - Z) mm 3000 x 1400 x 60 Maximum stroke of the axis (X - Y - Z) mm 3580 x 1838 x 125 Two panels simultaneously processables (in Y axe) mm 600 + mm 600 Total installed power (Kw) 38 WORKING GROUPS (TOP): Drilling heads with vertical spindles (No.) 1 Independent vertical boring spindles (No.) 38 + 3 special Independent horizontal boring spindles (No.) 6 Circular Grooving Saw (on X axis) dia. (mm) 100 Vertical electro-spindle (No.) 1 x SK 30 (Vertical electro-spindle motor power (Kw 6) Automatic Tools Changing System, Tools storage plate (No. 3 folds- positions) WORKING GROUPS (HORIZONTAL) Drilling heads with horizontal spindles (No.) 2 Horizontal drilling spindles - Right side (No.) 13 + Left side (No.) 13 Inserting nozzle and glue injectors (Right side) No. 2 + (Left side) No. 2 Storage tanks for automatic feeding of the dowels (No.) 1

Condition: new, Year of construction: 2023, number of straightening rollers: 9, coil weight: 20,000 kg, coil outer diameter: 2,000 mm, coil inner diameter: 508 mm, roller diameter: 126 mm, product height (max.): 12 mm, number of feed rollers: 2, feed roller diameter: 126 mm, straightening roller diameter: 84 mm, sheet thickness steel (max.): 12 mm, sheet thickness aluminum (max.): 12 mm, coil width: 2,000 mm, total length: 6,000 mm, sheet thickness copper (max.): 12 mm, sheet thickness (max.): 12 mm, load capacity: 30,000 kg, sheet thickness brass (max.): 12 mm, inner diameter: 508 mm, input voltage: 380 V, power: 0.006 kW (0.01 HP), working height of feeder: 1,200 mm, Equipment: 4 in one shovel, Coil Uncoiling, Straightening and Feeding to Presses Coil feeding Lines are designed to work in the range of 30 mm to 2000 mm Widths, 0.1 - 12 mm Strip Thickness, 750 Kg to 20.000 Kg Coil Weight. Automated Line, Hands-Free Operation Automated Feeding High Precision Straightening, Leveling Sensitive Accurate Feeding Stainless, Aluminum, Copper, Brass, Carbon Steels Cjdpfx Ajh Dzg Hsb Toaa Uncoiling and Coil Loading Working Speed 10 - 120 meters/min. Servo Drive System – Trigger / Geared Gear Transmission System Distance Detection Adjustment / Laser sensor Tool Memory 250 options can be saved Different Feeding Steps with input-output communication with Press Multiple External Output Option Press Automation System Feeding Height Automation

Condition: good (used), Year of construction: 2000, Weinig High Mech E6 infeed + A5 outfeed + stacker 1. Weinig pack infeed roller conveyor. 2. Weing pack tilt 3. Weinig flat chain cross feed conveyor with single board feeder. 4. Weinig reject sorting unit with roller tracks. 5. Weinig EM814 moulder infeed with flat chain feeder. 6. Weinig outfeed 3m belt accelerator conveyor. 7. Roller conveyor with cross feed chain kickers. 8. Weinig cross feed buffer belt conveyor. Csdpfx Aowgbw Reb Teaa 9. Weinig flat chain stacker with scissors lift roller conveyor. 10. Weinig pack outfeed roller conveyors. Possible to offer with additional Weinig bundling system if needed.

Condition: used, Year of construction: 1988, strip width (20) 44 - 320 mm strip thickness 0,66 – 4 mm Casdolil Ewjpfx Ab Tea strip cross section max. 930 mm² reference material (tensile strength) St42-2 (500 N/mm²) yield stress max. 280 N/mm² coil weight max. 4 t coil-dia max. 1.500 mm

Condition: used, The sale is due to insolvency. The entire system was purchased in 2021 and was only in operation for approximately 3 years. Manufacturer: Randek (Sweden) Year of manufacture: 2021 1. Saw Type: SPL 728 X04 Control: Beckhoff, touchscreen Languages: See photos Mitre cuts: 0°–360° Bevel cuts: 90°–28° Max. material thickness: 250 mm Saw blade diameter: 700 mm Power: 7.5 kW 2. Infeed unit with stacking device, right Type: UV130F2X05 Length: 13 m Lifting table: 4,000 kg 3. Outfeed unit with stacking device, left Type: IH106F1X01 Cjdpjxqpqkofx Ab Tjaa Length: 10.60 m Lifting table: 5,500 kg 4. Label printer Brand: ZEBRA Overall system dimensions approx.: Length 24 m x width 3 m

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Vibratory bowl weight: 32 kg WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. Caedpfxoxf Up Uo Ab Tja The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Condition: like new (used), Chain feed table, used for feeding and linear transportation of roll goods or log goods. Forward/reverse run (reversing circuit) integrated, end positions are queried via roller limit switches. Feeding length: 2200mm Feeding height: 950mm (adjustable) Caodpfx Astw Sm Nob Tja Drive power: 0.18kW (Getriebebau Nord) Condition: slight paint wear, otherwise as good as new

Condition: good (used), functionality: fully functional, CAMU Pneumatic feeding and straightening line with decoiler: - CAMU SCI 530 F decoiler - CAMU RSC 500/7 straightener line - Max. diameter: 1500mm - Max. weight: 3000kg - DieTronic coil lubricator width 500 mm Mape ANP 510 gripper feeder Caodpfovmn H Tjx Ab Tja - width: 510mm - Feed length: 500mm - Thickness: 0.7 – 3.7mm - Positioning accuracy: +/-0.05m

Year of construction: 1988, condition: used, strip width (20) 44 - 320 mm Csdobicz Hspfx Ab Tsaa strip thickness 0,66 – 4 mm strip cross section max. 930 mm² reference material (tensile strength) St42-2 (500 N/mm²) yield stress max. 280 N/mm² coil weight max. 4 t coil-dia max. 1.500 mm

Condition: used, Strip Processing Line, Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Very well equipped with feed-in aids Required floor space for the entire line (L x W): approx. 7000 x 3000 mm Total weight: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rolls: 7 Straightening roll diameter: Ø 40 mm Number of pinch rolls: 2 Pinch roll diameter: Ø 80 mm Entry height/pass-through height: 1500 mm - Straightening rolls hardened, ground and hard-chromed, with central support - Pinch rolls hardened, ground and hard-chromed, with hydraulic lifting - Manual straightening roll adjustment - Feed assist with hydraulically extendable tongue and hydraulically adjustable deflection pulley - Adjustable side strip guides - All straightening rolls driven via distribution gearbox and cardan shafts - Both pinch rolls driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightener opening stroke 250 mm for cleaning or for processing thicker material, lifting by trapezoidal-thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Net weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Outer coil diameter: max. 1600 mm (with load carriage) Outer coil diameter: max. 2000 mm (without load carriage) Diameter of coil turntable: Ø 1700 mm Coil inner diameter, expansion range: 460–520 mm Coil width, nominal: max. 630 mm Expansion jaw width: 750 mm Height of decoiler drum above base plate: 1500 mm - Decoiler drum driven by hydraulic motor and gear - Pneumatic overrun brake on the decoiler drum (TWINFLEX) - Hydraulic expansion of the decoiler drum, centrally via wedge slider system - Hydraulic pressure arm with hydraulically driven double pendulum roller - Coil loading carriage with 12-ton lifting capacity and 300 mm stroke Codpeif Sg Ssfx Ab Teaa - Decoiler on elevated travel frame with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Net weight: approx. 5 tons Central Hydraulic Power Unit (adjacent) Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2x REXROTH tandem pumps - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Net weight: approx. 800 kg Electrical Cabinet (adjacent) - All cable connections via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Net weight: approx. 800 kg

Condition: good (used), Year of construction: 2019, functionality: fully functional, EMAE-85/600 Servo feeding and straightening line with LARA D-3000/1600-MH decoiler: Hydraulic coil loading table for Lara D-3000/1600MH decoiler Max. width: 600mm Casdpfxevmmucs Ab Tja Max-Min thickness: 0.8 – 4mm Positioning accuracy: +/-0.05mm Max. Diameter: 1600mm Max. Weight: 3000kg Connection to press CamPositioner_HBPS DieTronic coil lubricator width 500 mm Renewed safety logic and mesh fences 8/2020 CE approved

Year of construction: 1987, condition: excellent (used), strip width 160 - 1.050 mm strip thickness 0,4 – 3 mm strip cross section 2.500 mm² reference material (tensile strength) 420 N/mm² Codpfx Abelilzto Toaa

Condition: used, Vibratory bowl feeder / sorting device / bowl feeder / vibratory feeder RNA Vibratory bowl feeder, sorting device / screw feeder with vibratory feeder for screwdriving technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Ser.- No.: 03611 Year of construction: approx. 2000 Cup diameter bottom: 300 mm Pot diameter top: 350 mm Inner pot height: approx. 25 mm Sorting track width: approx. 30 mm Total height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 min-1 Mains connection: 230 Volt, 50 Hz - The conveyor was used for feeding automotive fuses Space requirement: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear conveyor / vibratory conveyor / sorting device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Ser. No. 00835 Year of construction: approx. 2000 Maximum rail length: 700 mm Usable weight: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 min-1 Mains connection: 220 Volt, 50 Hz - Swing plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Height with oscillating plate 145 mm Space requirement: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibratory drives, control unit, controller, control system for vibratory conveyors / sorting device / bowl feeder / vibrating bowl / vibratory feeder Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 Veff; (230VAC in motor operation) at 230V mains voltage 0 ... 98Vrms; (115VAC in motor mode) at 115V mains voltage Output voltage: 0...208 V (rms) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Circular conveyor, linear conveyor max. 10A adjustable Output 2: Circular conveyor, linear feeder max. 6 A adjustable Total load current: 16 Aeff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay DOWN: 0 ... 8 sec. Power output connection: Hirschmann 7 pol. - Two power outputs - Sensor amplifier with independently adjustable time stages (On / Off) - Soft start (internally adjustable) Cajdpfx Abouzn Nno Tsa - External enable input 24VDC Space requirement: L x W x H: 260 x 190 x 140 mm Control unit weight: 3.6 kg All devices tested and in good condition

Year of construction: 1987, condition: excellent (used), strip width 160 - 1.050 mm strip thickness 0,4 – 3 mm strip cross section 2.500 mm² reference material (tensile strength) 420 N/mm² Cjdpfx Aolil Aujb Tjaa

Condition: excellent (used), strip width: 160 - 1.050 mm strip thickness: 0,4 - 3 mm reference material (tensile strength): 420 N/mm² Cjdsxayy Ijpfx Ab Teaa coil weight: max. 7,5 t coil OD: max. 1.600 mm

Condition: excellent (used), strip width: 160 - 1.050 mm strip thickness: 0,4 - 3 mm reference material (tensile strength): 420 N/mm² Caodpfxoxayynj Ab Tea coil weight: max. 7,5 t coil OD: max. 1.600 mm

Condition: excellent (used), Year of construction: 2011, strip width: 100 - 800 mm strip thickness steel (aluminium): 0,8 - 4 (7) mm reference material (tensile strength): 600 N/mm² coil weight: max. 15 t coil OD: max. 2.000 mm year: 2011 Cajdow U R Adopfx Ab Toa

Condition: excellent (used), Year of construction: 2011, strip width: 100 - 800 mm Casdpew U Rztefx Ab Tea strip thickness steel (aluminium): 0,8 - 4 (7) mm reference material (tensile strength): 600 N/mm² coil weight: max. 15 t coil OD: max. 2.000 mm year: 2011

Condition: excellent (used), Year of construction: 2001, strip width: 100 - 800 mm Casdsrnq T Nepfx Ab Tsa strip thickness steel (aluminium): 0,8 - 4 (7) mm reference material (tensile strength): 600 N/mm² coil weight: max. 13 t coil OD: max. 2.000 mm year: 2001

Condition: excellent (used), Year of construction: 2001, strip width: 100 - 800 mm Caedernq Ufjpfx Ab Tja strip thickness steel (aluminium): 0,8 - 4 (7) mm reference material (tensile strength): 600 N/mm² coil weight: max. 13 t coil OD: max. 2.000 mm year: 2001