The TAC CNX is a fully automatic machine that can cross cut straight or angled, coupled with a CNC vertical drilling unit and vertical hopper feed loading leading device. This means a combined operating cycle of feeding, drilling and cutting with no manual operator intervention. The TAC can also just be used for crosscutting if so required. The saw unit cutting angle automatically adjusts to the required angle from the program, while the drilling group is controlled in 3 axis with a 5 spindle po...
Angular milling unit suitable for IMA - incompatible with a Weeke plug
9fyzflhlh
height 1.200 mm
Vsqsjy
width 1.000 mm
weight of the machine ca. 1 t
length: mm
width: 2000 mm
height: 3000 mm
depth: 1800 mm
weight: 10,3 pro Winkel t
2 clamping angles of the same size made of steel are available for sale. ( price per piece)
Steel construction, welded, surface finished.
Size of the angle: W: 2000 x D: 1800 x H: 3000mm
Clamping surface vertical: H:3000xB:2000mm
Holes on/in clamping surface 400 x 50 and 200 x 53mm, with M30 threaded holes and through holes
Clamping surface base stand: W:2000 x D:1800mm
Clamping hole Ø 51mm drilled in corners o...
heavy gear, angular gear
Hh238gz2c
-Translation: 20: 1
-Drive shaft: 35 mm
-Output shaft: 2x 22 mm
-Weight: 27 kg
Uffe Sass motorized conveyor with angular kick-out and protection fence
Boiz9ifrq8
Was used between Wadkin moulder and Celaschi double-end tenoner
Numerical Control Power Control + Software Cadmatic 4 Professional
N° 1 Infeed roller tracks (ca.) 18,000 mm + (OPTIONAL: Infeeder with chains)
Lifting table (mm) 5600 x 2200
VAC loader (sliding bridge) with fan suction for loading special or delicate panels
Zrycsxv7
1° Rear-pusher, with No. 6 clamps/grippers
Turning device (rotating unit) at 90°
1° Panel Saw - Max cutting width mm 5600 (cutting line with air cushion)
Max blade projection (mm) 170
Scoring Unit (max. diameter saw / power) mm 2...
Angular gearboxBrand: HOMAG
Jccuuj8rm
Clamping angle, angular table with T-slot clamping tower, clamping plateclamping surface: 700 x 550 mmmounting surface: 500 x 550 mmT-slot spacing: 180 mmT-slot width: 22 mmtable thickness: 70 mm - cast steel, both supports ground at a 90° angle - central fixing surface (275 mm) with 18 mm guide groove, equipped with 2 guide stones - fixing surface with 4 18 mm holes, hole spacing 380 x 300 mm - total dimensions L x W x H 700 x 550 x 500 mmWeight: 220 kgguter Zustand
D8f9s2h
length: 655 mm
width: 800 mm
Bewiezzeuu
height: 1000 mm
depth: Tiefe/Länge: 655 mm
weight of the machine approx.: 641 kg
Clamping surface is rough-machined
good used condition, slight signs of use
- T-slots according to DIN 650:
- a=28; h=50; b=50; c=21 mm
- centre distance = 160mm
Clamping surface of the foot: depth: 655mm x width: 800mm
Angular gear for heating basins for edge banders, edge banding machines, melting unit with granulate container
-Manufacturer: Homag
-Nummer: 4 pieces available
-different designs
2pll8q
-Price per piece
-Dimensions: 300/170/H190 mm
-Weight: 16.8 kg
width 2500 mm
height 1500 mm
depth 980 mm
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
Bkpnzvvpx0
5
from the dismantling of a Mikron WF21C milling machine:
Fixed angular table / machine table with T-slots (14mm)
Clamping surface 700x355
condition: used
Internal no.: 1233
This offer is directed exclusively to companies / commercial persons and not to consumers.
All prices are net.
The period of limitation for entrepreneurs is
newly manufactured things a year.
For used / new items the warranty is excluded.
You will receive a 14 day warranty on all articles.
"Functional/commissioning guarantee"...
Angular drilling gear spring-loadedBrand: HOMAG
3exn7u7l
length:1000 mm
width:1000 mm
height:2000 mm
Nsvlx
number of T-slots:13
T-slot - width:22 mm
thickness of clamping area:85 mm
Thickness:90 mm
weight of the machine ca.:2,0 t
table length: mm
table width: mm
table load: t
width: 655 mm
depth: 500 mm
height: 500 mm
weight of the machine ca.: 197 kg
dimension L-W-H: 420 x 655 x 500 mm
model: angular frame with double stiffness
vertical plate:
- size W: 655 x H 500 x thickness: 40mm
- with clamping holes, long holes and center hole
7xngvcyrf
foot plate:
- size: B:655 x L:420 x thickness : 40mm
- with long holes
Angular gear for heating basins for edge banders, edge banding machines, melting unit with granulate container
-Manufacturer: Homag
-Dimensions: 440/185/H240 mm
-Weight: 30 kg
S0ybzaa29
length 250 mm
width 170 mm
height 250 mm
Cgo80imo
groove width 18 mm
weight of the machine ca. 29 kg
dimensions of the machine ca. 250 x 170 x 250 mm
throat:700 mm
tool adaptor: 50
power requirement:60 kW
weight of the machine ca.:0,8 t
Bb9wy7c73f
dimensions of the machine ca.:0,8 x 0,8 x 0,8 m
double sided face milling head with 2 ISO 50 taper, suitable for portal type milling machine
drive end taper ISO 60
min. distance cutter heads 400 mm
outside dimensions flange end 780 x 780 mm
clamping hole distance square 620 mm
ANGLED CUTTING FROM 20° TO 160° FOR SINGLE AND PACKS OF TABLES
As for the pushing TRSI cut saw, the TRGSI is also structurally a monobloc (speed of installation, anti-vibration system, to cite few of the benefits)
Cutting program for individual boards and packs
• Cutting in fixed sizes – Sequence of measures
• By a CNC industrial computer you can quickly create and store a variety of cutting plans, while working up to 25 different sizes, each with cylinder heads and independent options.
• The...
length 800 mm
width 500 mm
height 1000 mm
power capacity kW
weight of the machine ca. 0,3 t
Biugubaa3v
dimensions of the machine ca. m
2 units
length: 250 mm
width: 400 mm
height: 305 mm
Bbzeauska9
weight: je ca. 56kg
dimension L-W-H: 250 x 400 x 305 mm
- clamping surface vertical = H: 305mm x W: 400mm
- clamping surface foot L: 250mm x W: 400mm
- T-slots according to DIN 650: a = 18.0mm; h = 30.0mm; c = 11.5 mm; with 2x horizontal and 4x vertical; center distance Horizontal slot = 152mm and vertical slot 90mm
- clamping area of the foot: L: 250mm x W: 400mm
heavy gear, angular gear
-Translation: 1:1
-Drive shaft hollow shaft: 42 mm
-Output shaft hollow shaft: 38 mm
-Number: 3 gear units available
Lianf
-Price: per piece
-Weight: 40 kg/piece
Angular gearboxBrand: HOMAG
B8rbqfjk
length:700 mm
Cqydob2o0
width:300 mm
height:1050 mm
base plate:850x600x50 mm
thread:M16
2 x angle milling head
WFK 4 / WFK 40/200 with MK 4 mount
Oi8yz
2 x angle milling head 45° tiltable
UFK 14 P and UFK 14 N with SK40 mounting
Collets 6, 8, 10
table length 645 ( 350 ) mm
table width 18,5 mm
table height 1045 mm
T-slots 40 x 18 x 8,0 mm
weight ~ 650 kg
Wiep7bdr
length: 1050 mm
Bbsgijzu
width: 1200 mm
height: 1600 mm
depth: Länge/Tiefe: 1050 mm
weight of the machine approx.: 2483 kg
- vertical clamping surface: height: 1600mm; width: 1200mm
- clamping surface is smoothed
- 8x T-slots according to DIN 650:
- a=36; h=61; b=61; c=26 mm
- base clamping surface: depth: 1020mm; width: 1250mm
heavy gear, angular gear
-Translation: 1:16
Hsmub8n
-Drive shaft hollow shaft: 38 mm
-Output shaft shaft: 48 mm
-with claw coupling:
-Number: 1 piece gear available
-Price: per piece
-Dimensions: 470/240/H445 mm
-Weight: 59 kg/piece
Angular gearboxBrand: HOMAG
Gutqjvj
width 1300 mm
height 2500 mm
depth 1300 mm
thickness of clamping plate 50 mm
I9n299u
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
throat 450 mm
tool adaptor 60 ISO
power requirement 100 kW
spindle distance 720 mm
Ptxoki
speeds 12 - 450 U/min
total power requirement kW
weight of the machine ca. 2 t
dimensions of the machine ca. m
weight 5 t
height 4.300 mm
width 600 mm
Be7yxbnrh2
grinding diameter: 320 mm
grinding length: 400 mm
centre height: 160 mm
Grinding-wheel diameter: 700 mm
workpiece weight: 350 kg
control: PS TESLA NS - 915
total power requirement: 24 kW
weight of the machine ca.: 5.5 t
space requirements of the machine approx.: 3.5x2.2x2.8 m
bevel cut-in grinding machine
Yqaa3c
with loading magazine
On sale as is! As spare part donator
DOCUMENTATION AVAILABLE
Gear, bevel gear, Stinradgetriebe, bevel gear, gearbox
Iejigcr
Translation 1:2
Drive shaft ø 22 x 35 mm dimensions 180/110/H110 mm
Weight 11 kg
Angular gearboxBrand: HOMAG
Dwicri
width 1150 mm
height 2150 mm
depth 850 mm
total power requirement kW
Bkpnyzb82x
weight of the machine ca. t
dimensions of the machine ca. m
centre height 100 mm
centre distance 480 mm
plunge angle in degrees 45 °
Beohami9n0
longitudinal slide -travel 420 mm
table speeds 0 - 5 m/min
table swivelabel +/- 9 °
cross slide travel 45 mm
max. dia. of grinding wheel 450 mm
max. width of grinding wheel 80 mm
grinding wheel hole diameter 203 mm
work piece spindle speed 65 -500 U/min
grinding head swivelling 360 °
workpiece-spindlehead motor 0,55 kW
spindle cone MT 4
tailstock quill stroke 20 mm
tailstock taper MT 3
total power requirement 7...
Fixed angle table for tool milling machine
700 x 320 mm
Mvivao
Groove width 12 mm
for Hermle or Mikron machine
length 2510 mm
B8fnstut
width 605 mm
height 1350 mm
weight 1,9 t
Two pieces, the price is for one piece.
Machine dealer with own stock of 2500 m².
length 800 mm
width 450 mm
Nlpoh
height 800 mm
total power requirement kW
weight of the machine ca. 0,5 t
dimensions of the machine ca. m
Angular transferBrand: IMA Technical data: Angle transfer for connection of machine 1 at an angle of 90 degrees with Machine 2 to a production line. Workpiece transfer from longitudinal to transverse. With own drive for the feed. With own drive for the width adjustment. With transport chains and controllable workpiece holding rails. With electronic width adjustment via a pole-changing asynchronous three-phase motor with electronic dimensional preselection and tolerance monitoring. With controll...
1 used angle milling head
Make STS
Bm7k2qwrne
Type TA 26
Spindle holder SK 50
designed for speed 500- 2500 rpm
Weight 22 kg
The Powermax Chevron endmatches precut timber at very precise lengths. Both herringbone and hungarian point (chevron) are possible because of the free programmable scara arms. In this way every angle between -45° and +45° can be produced where 100% angle accuracy is guaranteed.
One of the unique features of the Powermax Chevron is its feeding system. The combination of feeding belts with opening and closing slides result in optimized feeding of the boards. The Powermax Chevron can produce up to...
width 1500 mm
height 1480 mm
depth 800 mm
total power requirement kW
2kgdifdj
weight of the machine ca. t
dimensions of the machine ca. m
I sell the automatic saw for angular cutting Stromab CT600. Year 2005.
Qkzvzxlh
Infeed table 6m long.
Outfeed table 3m
Matrial length max. 6,00m.
Max. saw blade diameter 600mm.
Angular cutting +-80°
Suitable for wooden house constructions!
Available immediately.
Angular Clamping Device
Technical data:
clamping surface vertical H x W 1600 x 1250 mm
Base plate horizontal H x W 1000 x 1250 mm
Plate thickness Clamping surface 90 mm
Panel thickness foot 50 mm
with
- 8 T-slots horizontal 36 wide
- Ring eye for transport
- Tapped holes in the clamping surface
used, in good condition
Ibgfbz9p0
Method K very good condition with workpiece return
3 milling units, 1 long spindle for slot and tenon tool
Bm0y9adugl
fully functional is replaced due to renewal.
Machine is still in operation and ready for use.
tool IV 72 in wood + wood aluminium with spare blades
as well as suction nozzles with pneumatic control can be
be acquired.
Duty from Jan. 2021
Plate: 500 x 630 mm
locating surface: 500 x 480 mm
Govuzuf
Panel thickness: mm
Number of clamping grooves: 5
groove width: 39 / 22 mm
slot depth: 42 / 25 mm
condition: very good
Weight:
Dimensions: 500 x 630 x 500 mm
new device, immediately available, in stock
Angled conveyor belt with fixed angles, incl. paddle separator and collecting plates in the feeding section
Feed section 600 mm
Riser 1300 mm
Bhsmeeibi
Output section 800 mm
effective width 350 mm
Outer width 405 mm (without motor)
height adjustable Delivery height 700 - 1000 mm
adjustable inclination
Belt Super Grip
belt speed 3 m/ min
mobile on steerable stop rollers
Paddle separator separately controllable and height adjustable